UNIPOWER's latest fuse distribution panel can protect up to 20 DC circuits
UNIPOWER’s latest addition to its DPG Series of GMT Fuse distribution panels is designed for users who need to protect DC circuits in a rack mounted system. The DPG1U Series provides distribution and overload protection for up to 10 circuits per side in A/B feed configuration and with this new version, up to 20 circuits in single-feed mode. The 1U high unit can be mounted in either a 19 or 23in. rack.
The panels can be configured to operate from 12, 24 or 48VDC, positive or negative ground. Fuse alarm is indicated be a red LED on the front panel and by Form C relay contacts.
These new panels are designed to be configured and operated either as a single feed with up to 20 circuits with a maximum of 150A capacity or as dual-sided with each side capable of 80A. Dual-sided panels can be separately configured to provide dual voltage distribution out of one panel. Fuse sizes from 0.5 to 12A can be accommodated.
To allow this distribution panel to be aligned with other rack-mounted equipment, the DPG1U can be mounted from the front of the rack, with offsets every quarter-inch from front to back.
All models meet the requirements of all relevant safety standards including UL60950-1, CSA22.2 No. 60950-1 and EN60950-1. The DPGF1U Series units are RoHS compliant.
Similar articles
More from Unipower-Europe Ltd
- MEDIMOD 120W Medical Switcher from UNIPOWER can be quickly configured to meet exact output specification 21st February 2012
- UNIPOWER-High Density Hot Swap Front-Ends Provide Up To 650W 14th February 2012
- DRC Series High Voltage DC Power Supply from UNIPOWER 25th January 2012
- UNIPOWER - High-Capacity Inverter/Charger Provides Long Term UPS Capability 10th August 2011
Write a comment
No comments