Unipower-Europe Ltd

UNIPOWER just announced a key addition to its MEDIMOD range of medically approved power platforms. The MEDIMOD AM-120UM is a 120W switch mode power supply with single to quad output voltages that can be quickly configured to suit customers’ exact requirements. With a universal AC input that meets EN61000-3-2, MEDIMOD AM-120UM power supplies are available in a comprehensive range of single to quad output configurations from 1.5 to 48VDC and deliver 120W of highly regulated output power.

UNIPOWER LLC announced the SGH 3000 Series of 650W, 12V Front-Ends designed to satisfy the latest networking and datacom applications that demand smaller size, lower energy consumption and a significantly reduced cost of ownership.

UNIPOWER LLC has announced a high voltage DC power supply designed to provide 4kW to 240kW across a very wide of range applications. Models in the general purpose DRC Series feature low ripple, fast transient response and a stable output across a wide variety of line voltages and load impedances. Tolerance of repetitive arcing for both process stability and power supply protection is also a key feature. • 4kW to 240kW with parallel operation • High power density • Ripple down to 0.1% of rated voltage • Output voltages from 500V to 450kV

INVO Series Inverter/Charger System is the latest product to be added to UNIPOWER’s extensive line of Inverters. The INVO Series is different in that it is a 5kVA inverter with a built-in charger; giving customers the ability to design their own “long-run UPS” by specifying the battery capacity to be used.

UNIPOWER announced the introduction of its EASYMOD Series Model AM120. This multiple output switcher is characterized by its versatility and adaptability into practically any Medical, ITE or Industrial application. While there are several standard models, the product is really designed to optimize the power supply to the customer’s Application Specific requirements.

UNIPOWER’s latest distribution panel series is designed for users who need, or prefer, front panel connections. The DPBF1U Series provides distribution and overload protection for eight circuits and the 1U high unit can be mounted in either a 19 or 23in. rack.

Leading power specialist UNIPOWER Corporation just announced a series of rack-mount AC PDUs (Power Distribution Units) that will find wide applications in mission critical networks. The Vigilant Series are 1U high and designed for 19in. rack systems and capable of providing AC power distribution at the rack or system level.

UNIPOWER’s latest addition to the already popular DPB Series of DC breaker distribution panels is designed for users who need to protect DC circuits in a rack mounted system. The DPB1U Series provides distribution and overload protection for up to 6 circuits per side in A/B feed configuration and with this new version, up to 12 circuits in single-feed mode. The 1U high unit can be mounted in either a 19 or 23in. rack.

UNIPOWER’s latest addition to its DPG Series of GMT Fuse distribution panels is designed for users who need to protect DC circuits in a rack mounted system. The DPG1U Series provides distribution and overload protection for up to 10 circuits per side in A/B feed configuration and with this new version, up to 20 circuits in single-feed mode. The 1U high unit can be mounted in either a 19 or 23in. rack.

UNIPOWER Corporation announced a new series of rack-mount sine wave inverters that will find wide application in mission critical systems. The Scimitar Series are 1U high, 1kVA and 2kVA sine wave inverters designed for 19in rack systems and capable of producing a 115 or 230VAC output from a 12, 24 or 48VDC power source.

UNIPOWER’s latest distribution panel series is designed for users who need, or prefer, front panel connections. The DPGF1U Series provides distribution and overload protection for six or 12 circuits and the 1U high unit can be mounted in either a 19 or 23in rack.

UNIPOWER's TPCMQ24 series DC/DC bus converters convert 24VDC to either 48 or 54.4VDC for a variety of applications including industrial and telecommunications. Output current is 20.8A at 48V or 18.4A at 54.4V, giving 1000W of total power. These converters operate from a wide range 20 to 30VDC (24V nominal) input with an efficiency of 89% and power density of 12.5W/in³.