Robust emergency pull-wire switch for heavy duty applications
24th July 2012
Source:
steute
With the new ZS 91, steute is expanding its range of emergency pull-wire switches to include a series which has been developed especially for heavy duty applications. Its enclosure is made of fibreglass reinforced plastic and can withstand very high levels of mechanical wear and tear.
Its release lever makes handling easier, while its optimised construction – in combination with the latest manufacturing technology – permits realisation of protection classes up to IP 67.
The switching system permits simple standardised integration of the emergency pull-wire switch in safety circuits. The wire length can measure up to 2 x 50 m, meaning that even large hazardous areas can be fitted with a rapidly accessible emergency-stop function. Additional safety functions include integrated monitoring of the pull-wire itself, as well as potential tears in the wire. An emergency stop signal can be visualised using an optional warning lamp or yellow indicating lever.
The ZS 91 conforms to DIN EN 60947-5-5. It can be used to switch off conveyor systems safely, for example in the mining industry or recycling plants.
In addition to different switching systems with up to six contacts, series variants also include the heavy-duty position switch ES 91 DL and the belt-alignment switch ZS 91 SR. The ZS 91 SR is fitted with an adjustable lever which gauges the correct alignment of a conveyor belt. If the belt is not running centrally, it will be switched off or a warning signal will be transmitted to the control room. This means that longer periods of inactivity, which can result from a fully loaded, falsely aligned belt, can be avoided.
The switching system permits simple standardised integration of the emergency pull-wire switch in safety circuits. The wire length can measure up to 2 x 50 m, meaning that even large hazardous areas can be fitted with a rapidly accessible emergency-stop function. Additional safety functions include integrated monitoring of the pull-wire itself, as well as potential tears in the wire. An emergency stop signal can be visualised using an optional warning lamp or yellow indicating lever.
The ZS 91 conforms to DIN EN 60947-5-5. It can be used to switch off conveyor systems safely, for example in the mining industry or recycling plants.
In addition to different switching systems with up to six contacts, series variants also include the heavy-duty position switch ES 91 DL and the belt-alignment switch ZS 91 SR. The ZS 91 SR is fitted with an adjustable lever which gauges the correct alignment of a conveyor belt. If the belt is not running centrally, it will be switched off or a warning signal will be transmitted to the control room. This means that longer periods of inactivity, which can result from a fully loaded, falsely aligned belt, can be avoided.
Similar articles
More from steute
- Cable-free enabling with new wireless safety foot control 27th November 2017
- Extreme switchgear and sensors for the handling of bulk goods 8th September 2017
- Three-stage wireless safe enables foot control 20th March 2017
- Sensors developed to handle the most arctic conditions 24th February 2017
Product Centre Updates
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex
Write a comment
No comments