Anamet’s New Anaflex Systems Offers Quick-fit Cable Protection
22nd September 2010
Source:
Anamet Europe BV
If you need professional cable protection, with fast and easy installation, look no further than the new ANAFLEX system from Anamet Europe.
The company has launched the new flexible stainless steel conduit system featuring push-on fittings which mean that it can be fitted to cables in just minutes.
The ANAFLEX conduit system is manufactured from corrugated stainless steel hose and can withstand temperatures between -70°C to +250°C. It is liquid-tight, consists of a continuous tube allowing optimum EMI/EMP shielding to be obtained and when used in conjunction with the ANAFLEX-CLICK fittings, achieves a seal to IP69K standard. What’s more, it is highly resistant to oils greases and solvents and should a fire break out, there will be no toxic fumes.
As a result, the ANAFLEX system is perfect for use in areas that experience higher operating temperatures, such as within the cement industry, brick production, at heat treatment facilities and metal processing operations.
The ANAFLEX-CLICK fittings are manufactured from nickel-plated brass and fitting them to the ANAFLEX piping couldn’t be easier – simply cut the hose to the desired length using a pipe-cutter or saw and thread onto the desired cable. Then turn back the nut on the ANAFLEX-CLICK fittings by half a turn to release the retaining ring and push the fitting firmly into the hose until it fits flushly against the seal. Finally tighten the nut using a wrench to ensure it is totally sealed and watertight.
Ed Dickson, UK Sales Representative for Anamet, said: “This product is ideal for a wide variety of applications where high temperature cabling needs to be shielded and mechanically protected.
“And because the six core components used in the fitting are pre-assembled into just one unit, once the hose is cut to the required length it can be fitted in just seconds, making it ideal to use out in the field.”
The ANAFLEX system is available in three sizes with the tube’s internal diameter measurements between 12.2 mm and 20.3 mm. Fitting threads offered are M16, M20 and M25
Anamet Europe BV was founded in Holland more than 60 years ago and now supplies Europe, the Middle East and Asia. The company specialises in the supply of a range of flexible connection and protection systems for cables, pipes and hoses and offers a wide range of products to suit a variety of different industry applications.
The company’s staff are highly trained and are on-hand to provide customers with the in-depth technical information required to assist in suitable product choice.
For further information about the range of heat protection products available from Anamet or to request a brochure, telephone Ed Dickson on 07836 508481 or visit www.anamet.nl.
The ANAFLEX conduit system is manufactured from corrugated stainless steel hose and can withstand temperatures between -70°C to +250°C. It is liquid-tight, consists of a continuous tube allowing optimum EMI/EMP shielding to be obtained and when used in conjunction with the ANAFLEX-CLICK fittings, achieves a seal to IP69K standard. What’s more, it is highly resistant to oils greases and solvents and should a fire break out, there will be no toxic fumes.
As a result, the ANAFLEX system is perfect for use in areas that experience higher operating temperatures, such as within the cement industry, brick production, at heat treatment facilities and metal processing operations.
The ANAFLEX-CLICK fittings are manufactured from nickel-plated brass and fitting them to the ANAFLEX piping couldn’t be easier – simply cut the hose to the desired length using a pipe-cutter or saw and thread onto the desired cable. Then turn back the nut on the ANAFLEX-CLICK fittings by half a turn to release the retaining ring and push the fitting firmly into the hose until it fits flushly against the seal. Finally tighten the nut using a wrench to ensure it is totally sealed and watertight.
Ed Dickson, UK Sales Representative for Anamet, said: “This product is ideal for a wide variety of applications where high temperature cabling needs to be shielded and mechanically protected.
“And because the six core components used in the fitting are pre-assembled into just one unit, once the hose is cut to the required length it can be fitted in just seconds, making it ideal to use out in the field.”
The ANAFLEX system is available in three sizes with the tube’s internal diameter measurements between 12.2 mm and 20.3 mm. Fitting threads offered are M16, M20 and M25
Anamet Europe BV was founded in Holland more than 60 years ago and now supplies Europe, the Middle East and Asia. The company specialises in the supply of a range of flexible connection and protection systems for cables, pipes and hoses and offers a wide range of products to suit a variety of different industry applications.
The company’s staff are highly trained and are on-hand to provide customers with the in-depth technical information required to assist in suitable product choice.
For further information about the range of heat protection products available from Anamet or to request a brochure, telephone Ed Dickson on 07836 508481 or visit www.anamet.nl.
Similar articles
More from Anamet Europe BV
- Don’t Overlook Cabling When It Comes To Fire Safety 9th March 2011
- Anamet’s New Anaflex Systems Offers Quick-fit Cable Protection 22nd September 2010
- Protect Your Cables From Extreme Temperatures Thanks To Anamet 24th June 2010
Write a comment
No comments