Torque sensor enables demanding static and dynamic measurements
HBM Test and Measurement has introduced its new T21WN torque transducer. Based on strain-gauge technology, the T21WN uses contactless energy and measurement signal transmission to measure torque. The torque transducer enables demanding static and dynamic measurements of torque, rotational speed, and angle of rotation to be performed on non-rotating as well as rotating components.
It is suitable for laboratory, test shop, and testing applications as well as for use in production and process monitoring and quality assurance.
Apart from the torque output signal of +/-10V at nominal (rated) torque, it also provides a standard frequency output signal of 10kHz+/- 5kHz.
The T21WN torque transducer is available with nominal (rated) torques ranging between 0.1 N·m and 200 N·m. The maximum permissible rotational speed of torque measuring system is up to 20,000rpm, depending on the measurement range. An integrated rotational speed/angle of rotation measuring system with 360 pulses per revolution completes the transducer and can be used up to the specified maximum nominal (rated) rotational speed without restrictions.
The transducer is supplied with the direct voltage of 24V that is common in test benches. The T21WN is suitable for use in substantially more dynamic applications than the preceding model, the T20WN, thanks to its measurement bandwidth of 1kHz. Users benefit from a significantly broader range of functions than with the preceding model - at the same price.
Similar articles
More from HBM
- HBM to exhibit weighing technology at PPMA show 2018 27th July 2018
- Measurement module enables torsional vibration analysis 23rd May 2018
- Strain gauges designed for high temperatures up to 350°C 30th April 2018
- Torque sensor enables demanding static and dynamic measurements 6th March 2018
Write a comment
No comments