Spelsberg els

Address:
Unit 1B, Queensway Business Park
Hadley Park West
Telford, TF1 6AL
United Kingdom
TF3 3BJ
United Kingdom

Phone: +44 1952 605849

Fax: +44 1952 670814

Web: http://www.spelsberg.co.uk


Spelsberg els articles

Displaying 1 - 20 of 59

Electrical equipment selected for new headquarters

Electrical equipment selected for new headquarters
It has been announced that Spelsberg IBT electrical enclosures and other equipment have been fitted throughout a prestigious new office building in Epsom, Surrey, designed by and for WS Atkins PLC, a respected design, engineering and project management consultancies.
16th April 2019

Fire protection enclosures contribute to safety

Fire protection enclosures contribute to safety
In the event of fire in large, crowded shopping centres, the safety and well-being of anyone inside relies on emergency systems operating for long enough for people to escape. Limbecker Platz, one of the largest shopping centres in Germany, chose Spelsberg’s WKE enclosures to provide adequate fire safety protection to vital circuitry that can save lives in the event of fire. 
3rd April 2019

Innovative IBT system chosen for London residential project

Innovative IBT system chosen for London residential project
Demand for housing in the UK’s capital has never been higher, as such there are a number of development projects underway. A major development project taking place along the River Thames will see a collection of high-quality and it is PRS & affordable rent built incorporating modern mechanical, electrical and plumbing (MEP) services. Parker Bromley, the building services contractor on the site, has specified Spelsberg’s innovative IBT system of junction boxes.
19th December 2018


Act now to prevent frozen and burst pipes

Act now to prevent frozen and burst pipes
As the long cold winters are being predicted, Chris Lloyd, Managing Director of Spelsberg UK, is recommending that owners and operators of industrial plants take pre-emptive action before the weather turns bad by checking existing equipment. He has suggested that installing thermostats and trace heating is a simple and cost-effective way to ensure operations are not brought to a standstill by the sub-zero temperatures that are sure to hit the UK.
17th December 2018

BIM is set to transform construction management

BIM is set to transform construction management
Like most industries, building and construction is moving with the times. Having long since realised the efficiencies that computers can bring, it is now taking this to the next level with the increasing adoption of Building Information Modelling (BIM). Chris Lloyd, Managing Director of electrical enclosure manufacturer, Spelsberg UK, looks at the principles of BIM and its potential to improve construction management.
5th September 2018

CNC machine further increases responsiveness to orders

CNC machine further increases responsiveness to orders
With the pressure on OEMs and designers to keep products ahead of game growing, the popularity of customised enclosures is increasing across all industries. Spelsberg UK is already recognised as a leading supplier of specialised solutions thanks to its in-house capabilities and engineering know-how. It has recently invested in further CNC machining capabilities to ensure that its lead times remain the best in the business.
8th February 2018

Wiring up to fix Britain’s broken housing market

Wiring up to fix Britain’s broken housing market
The housing crisis that is looming across the UK may be averted with efficient off-site modular building techniques. Here Chris Lloyd, Managing Director of Spelsberg UK, looks at how electrical enclosure manufacturers are poised to help, and explains his thoughts on the crisis. As house prices are so high now most young people can only dream about buying their own home, while affordable rental options are also very limited.
9th January 2018

Is it all about location location location?

Is it all about location location location?
People talk about location a lot, when buying a house, when parking a car and when sun bathing at the beach. But is positioning as important as specification when planning your electrical housings? Talking to electrical supply company Spelsberg we discover the answers to the all important questions.
6th October 2017

Distribution board helps keep divers’ pressure stable

Distribution board helps keep divers’ pressure stable
The AK Air condensation-free IP65 rated distribution boards from Spelsberg have become one of the world’s most demanding applications, decompression chambers for deep sea divers. The Bends, or decompression sickness, is one of the greatest fears for all divers. If they rise from great depths too quickly, the decompressing of their bodies as the water pressure reduces can cause gas bubbles to form in their bodies, blocking blood flow and causing cellular damage.
30th June 2017

Next-day custom enclosure samples keep projects on schedule

Next-day custom enclosure samples keep projects on schedule
Just 12 months after launching the popularity of Spelsberg UK’s next day sample service is continuously growing. By delivering samples for custom enclosure designs with a 24 hour turnaround, customers are able to compress their project times while also helping ensure optimum designs. Chris Lloyd, Managing Director, explains how Spelsberg is achieving such a fast turnaround.
27th June 2017

Electrical surges need effective protection

Electrical surges need effective protection
If your regime for protection against electrical surges starts and ends with fitting a lightning conductor to the top of your building, then not only are you unlikely to be fully protected against all lightning induced surges, but probably thousands of pounds’ worth of equipment is aging prematurely as well. Chris Lloyd, Managing Director of Spelsberg UK, look further at the causes of electrical surges and the importance of protective measures.
26th May 2017

Keep the frost away with a fit and forget thermostat

Keep the frost away with a fit and forget thermostat
When most people think of winter they think of Christmas time, mistletoe and wine. However it also means burst pipes and ensuing chaos. The latter of that sentence is closer to home than you might think and in a process plant it is about as welcome as a pair of socks for Christmas. Fortunately steps can be taken to minimise its likelihood.
1st December 2016

Laboratory approved for in-house UL certification

Laboratory approved for in-house UL certification
Non-metallic electrical enclosures manufacturer, Spelsberg, has over 100 million injection moulded parts being processed every year. R&D is extremely important for the company in order to maintain its position as a technological leader in its area of expertise; its Germany based manufacturing facilities include a testing laboratory which is now able to conduct UL compliance tests in-house.
30th August 2016

Pod bathrooms benefit from bespoke enclosures

Pod bathrooms benefit from bespoke enclosures
The ease and speed of on-site installation for pre-built bathroom pods manufactured off-site are revolutionising many fields of building construction. Today’s state-of-the-art units are elegantly designed and have all the fittings associated with modern bathrooms. Enclosure manufacturer Spelsberg UK is helping pod builder Offsite Solutions develop ready to run electrical systems that can be connected up as soon as the pod is in place.
29th July 2016

UK salad grower uses electrical enclosures and CHP

UK salad grower uses electrical enclosures and CHP
A commercial greenhouse operated by one the largest salad growers in the UK have used Spelsberg electrical enclosures in a high tech environmental control system. Salad growers need a high level energy efficiency, lighting and climate control throughout their massive commercial greenhouses, as they are serving a market that is increasingly demanding and competitive.
25th July 2016

Evolution of automated manufacturing plants encouraged by easy rewiring development

Evolution of automated manufacturing plants encouraged by easy rewiring development
Rewiring automated plants as production requirements change and evolve can be difficult, but not according to Spelsberg and its developed redesigned GTi range. Electrical enclosure innovator, Spelsberg has developed its range meaning wiring layouts can be kept neat through any number of changes, making both reconfiguring and fault tracing easy and efficient.
13th July 2016

Commercial salad growers box clever with Spelsberg

Commercial salad growers box clever with Spelsberg
Spelsberg electrical enclosures have been used in a high tech environmental control system for a commercial greenhouse operated by one of the largest salad growers in the UK.
18th May 2016

Spelsberg slashes lead times on custom orders thanks to new CNC machine

Spelsberg slashes lead times on custom orders thanks to new CNC machine
Spelsberg UK has invested in a new CNC production cell at its headquarters in Telford. As demand for customised enclosures continues to grow, the latest addition will help the team to continue to deliver customisation options on over 4,000 standard products with market beating lead times.
25th February 2016

Spelsberg Pro-Active simplifies ordering for reduced lead times

Spelsberg Pro-Active simplifies ordering for reduced lead times
Spelsberg already offers some of the lowest lead times for bulk orders of both standard and customised product, now it has developed a new telesales service, Pro-Active, which has been designed to further speed up the ordering process for both new and existing customers. The technical service offers design and specification advice and allows orders to be processed the same day to keep delivery times low.
8th December 2015

Stealth enclosures for covert operations

Stealth enclosures for covert operations
In the world of engineering it’s a truism that every application has its own unique challenges. However, some challenges are more noteworthy than others; such as specifying enclosures for external use on a vessel with stealth capabilities, for example. This is just one of the unique challenges that Spelsberg has been presented with which can be solved with the use of innovative coating technology.
1st December 2015


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

The Engineering Design Show
19th October 2021
United Kingdom Coventry Building Society Arena, Coventry
Digital Twin World 2021
19th October 2021
United Kingdom Online
Sensors 2021 Conference
20th October 2021
Italy Milan
Digital Transformation Week North America Virtual 2021
9th November 2021
United Kingdom Online
Future Work Solutions Congress 2021
2nd December 2021
United Kingdom Online