Gems Sensors & Controls

Address:
Lennox Rd,
Basingstoke,
Hants,



RG22 4AW
United Kingdom

Phone: +44 (0)1256 320244

Fax: +44 (0)1256 473680

Web: http:// www.gemssensors.com


Gems Sensors & Controls articles

Displaying 1 - 20 of 23

New Subminiature, Piston Actuated Pressure Switch

New Subminiature, Piston Actuated Pressure Switch
The design of Gems' new model PS61P incorporates a hardened alloy steel piston actuator for expanded overpressure performance. The PS61P is highly configurable off-the-shelf, with choices of alternate seals, fittings, and electrical terminations to meet unique OEM, aftermarket, and retrofit requirements.
23rd June 2015

High-Reliability Explosion Proof Pressure Transmitters with Switching Output Capabilities for Hazardous Area Environments

High-Reliability Explosion Proof Pressure Transmitters with Switching Output Capabilities for Hazardous Area Environments
We are excited to announce the launch of our new 3800/3820 Series are a family of compact, hermetically sealed, all stainless steel OEM pressure transmitters and transmitter-switches. Each is ruggedly designed to ensure reliable, continuous, accurate pressure measurements within hazardous area and other hostile environments.
25th March 2015

Visual Indication, Continuous Sensing and Accurate Switching

Visual Indication, Continuous Sensing and Accurate Switching
Gems RotorFlow is a family of electronic flow sensors, designed to provide reliable and continuous sensing, accurate switching, and clear visual indication within a variety of flow rate monitoring and metering applications.
17th March 2015


Intrinsically Safe Pressure Monitoring

Intrinsically Safe Pressure Monitoring
Gems Sensors & Controls is pleased to introduce the 31CS and 32CS Series intrinsically safe pressure transmitters. These series have been approved by CSA to the standards required for both USA and Canadian use in hazardous areas. Based on the successful Gems 3100 & 3200 Series products, 31CS/32CS transmitters are compact and durable in harsh outdoor environments.
21st March 2013

GEM PROVIDES FAST PAYBACK FOR ITALCABLES

GEM PROVIDES FAST PAYBACK FOR ITALCABLES
Metered tests carried out on Thermal Energy International’s GEM steam traps by Italcables, Italy’s largest producer of wire strands for pre-stressed concrete and post-tensioned structures, have shown steam savings of up to 30% compared to mechanical traps
16th December 2011

New digital output sensor option for Gems RotorFlow series

Gems Sensors & Controls, a market leader in custom made fluid sensing and control solutions, has introduced the new RotorFlow Output for its RotorFlow Series of fluid flow sensors. The RotorFlow’s unique highly visible paddlewheel rotors and solid-state electronics provide accurate flow rate output with visual confirmation when monitoring dynamic fluid flow within fluid lines. This additional output function is compatible with most digital logic units for a range of commercial and industrial machinery and systems.
19th October 2011

New digital output sensor option for Gems RotorFlow series

Gems Sensors & Controls, a market leader in custom made fluid sensing and control solutions, has introduced the new RotorFlow Output for its RotorFlow Series of fluid flow sensors. The RotorFlow’s unique highly visible paddlewheel rotors and solid-state electronics provide accurate flow rate output with visual confirmation when monitoring dynamic fluid flow within fluid lines. This additional output function is compatible with most digital logic units for a range of commercial and industrial machinery and systems.
28th September 2011

New level switches from Gems is ideal for high volume OEM applications

Gems Sensors and Controls has launched the latest version of its proven LS-3 level switches. These small, lightweight and robust devices are ideal for a wide range of OEM and end user applications including small tanks, areas with limited access and fluid systems where low cost, high volume switches are required.
21st September 2011

Gems introduces new tough metal electro-optic liquid level sensor

Gems Sensors & Controls has introduced a new compact, durable, and low cost Electro Optic Level Sensor (ELS) for liquid level sensor applications. The ELS 950M expands on the existing ELS 950 Series and will benefit OEMs and end users in a wide range of industries and environments.
16th September 2011

Gems Sensors and Controls launches precision magnetostrictive level sensors

Gems Sensors and Controls, has launched an innovative range of magnetostrictive level sensors. The new XT-1000 sensors have been designed for use in a wide range of OEM and end user applications, providing continuous operation with extremely high levels of precision and reliability.
15th September 2011

New low energy solenoid valves from Gems Sensors give fast response and high flow

New low energy solenoid valves from Gems Sensors give fast response and high flow
Gems Sensors & Controls, a global market leader in fluid sensing and control solutions, has introduced the energy efficient E Series family of pneumatic solenoid valves, specifically engineered to give fast response and high flow rates in a wide range of air and dry gas applications.
14th July 2011

Improved Durability For Low Cost Level Switches From Gems

Improved Durability For Low Cost Level Switches From Gems
The LS-3 Series of compact, all plastic liquid level switches, from Gems Sensors & Controls, is ideal for shallow tanks, restricted spaces or for any low-cost, high volume use. The highly reliable design of the LS-3 Series level switch operates on a simple principle: a magnet-equipped float moving directly with the liquid surface actuates a hermetically sealed reed switch within the unit’s stem. As with all Gems buoyancy type level switches, contact between the fluid and the switch is hermetically sealed, ensuring long life and reliable operation.
2nd November 2010

Gems Sensors & Controls Introduces CE Approved Solenoid Valves in Europe

Gems Sensors & Controls Introduces CE Approved Solenoid Valves in Europe
Gems Sensors & Controls, a market leader in custom made fluid sensing and control solutions, announces the availability of their complete line of CE approved 2- and 3- way miniature solenoid valves to OEMs in Europe. The Gems line of solenoid valves includes general-purpose, isolation and cryogenic valves for a broad range of applications and industries.
6th October 2010

RotorFlow Sensors Combine Continuous Fluid Flow Sensing with Visual Indication

RotorFlow Sensors Combine Continuous Fluid Flow Sensing with Visual Indication
Gems Sensors & Controls, introduces the RFO type of the RotorFlow Series of fluid flow sensors. RFO stands for “RotorFlow Output”, and is designed for flow rate monitoring or metering applications. RotorFlow RFO type sensors provide a pulsed DC voltage output that is proportional to the rate of flow. The 4.5 to 24VDC pulsed output is easily integrated into most digital logic units. What makes RotorFlow sensors unique is the highly visible paddlewheel that provides verification at a glance to confirm that fluids are moving. Typical applications for RotorFlow RFO type sensors include water purification, dispensing systems, chemical metering, laser and welders, semiconductor processing, water injection systems, and chillers and heat exchangers.
4th August 2010

New Isolation Valves With Inert Body And Diaphragm Materials Added To Gems Family

New Isolation Valves With Inert Body And Diaphragm Materials Added To Gems Family
Gems Sensors & Controls announces its new K Series of inert isolation solenoid valves. Constructed from chemically inert materials such as: PTFE, ETFE, EPDM, FKM, FFKM, PEEK, PPS and PSU, the K Series of isolation valves is an excellent choice for any application requiring various levels of chemical resistance and/or sample purity. Typical applications include Liquid Chromatography, Gas Analyzers and Water Quality Testers.
26th November 2009

PRX-100 Series - Gems Sensors & Controls Introduces Versatile New Proximity Switches

PRX-100 Series - Gems Sensors & Controls Introduces Versatile New Proximity Switches
Gems Sensors and controls has announced the launch of a new range of magnetically actuated proximity switches for a wide range of customer applications. Versatile, low cost and compact, these new switches are hermetically sealed for long lasting performance and easy installation.
27th October 2009

UCL-510 - GEMS Introduces Ultrasonic Continuous Liquid Level Sensor With Multipoint Switch Capability

UCL-510 - GEMS Introduces Ultrasonic Continuous Liquid Level Sensor With Multipoint Switch Capability
Gems Sensors & Controls has launched the UCL-510 Ultrasonic Level Sensor. The compact UCL-510 is suitable for non-contact applications such as industrial water treatment, wastewater management, chemical storage, and many other challenging fluid applications. The UCL-510 offers an innovative solution for challenging fluid measurement with no moving parts.
24th September 2009

Gems Introduces New Compact, Low Pressure Transducer

Gems Introduces New Compact, Low Pressure Transducer
Gems Sensors & Controls announces the launch of the new 3300 series pressure transducer. The 3300 series transducer is designed for low pressure applications that demand small size and low cost along with high accuracy and stability. The 3300 Series pressure transducer is well suited to applications such as chemical sterilizers, autoclaves, pneumatics, HVAC&R, pumps & compressors.
24th July 2009

GEMS Introduces Ultrasonic Continuous Liquid Level Sensor for Challenging Fluid Measurement

Gems Sensors & Controls has launched the UCL-520 Series of Ultrasonic Level Sensors. The UCL-520 Series is suitable for non-contact applications such as industrial water treatment, wastewater management, chemical storage as well as many other challenging fluid applications.
6th February 2009

Gems Announces New Low Flow-Rate Sensor In FDA-Approved Materials

Gems Announces New Low Flow-Rate Sensor In FDA-Approved Materials
Gems Sensors & Controls has launched the new TurboFlow FT-330 series of low-cost, highly accurate turbine flow rate sensors for drinking water dispensing applications. The FT-330 is an OEM flow sensor featuring proven Hall-effect turbine technology in a small package for years of dependable, worry-free service. All wetted parts are made from FDA-approved materials including Noryl, polyamide or nylon composite, Delrin (Polyoxymethylene (POM)) and 316 stainless steel.
30th October 2008


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Space Tech Expo USA 2022
23rd May 2022
United States of America Long Beach
2nd Annual - APAC Data 2030 Summit
25th May 2022
Singapore Online
Hardwear.io USA 2022
6th June 2022
United States of America Delta Hotels by Marriott
Smart Tech Korea 2022
8th June 2022
Korea (south)
Advanced Engineering Stockholm 2022
15th June 2022
Sweden Kista Convention Center (Kistamässan AB)