Brady's TAGLOCK lockout solution enables operators, mechanical engineers, maintenance and safety personnel to quickly and easily lock out electrical circuits in order to prevent accidental engagement while maintenance is ongoing. The risk of electrocution and other accidents related to re-energising can be reduced with TAGLOCK.
TAGLOCK blocks circuit breakers in the off-position to prevent accidental re-engagement while maintenance is ongoing. By securing circuit breakers in the off-position during maintenance, the risk of electrocution and other, re-energising related, accidents with potentially severe consequences can be reduced.
Up to four workers
Up to four workers can use the circuit breaker lockout device simultaneously, each with their personal, colour-coded cable tie. When their part of the job is complete, each worker can remove his personal tie and tag. When maintenance is done, the last worker also removes the circuit breaker lockout device to allow circuit breaker re-engagement.
Easy to apply
TAGLOCK can be installed quickly and easily. Apply the circuit breaker lockout device, run a cable tie through its hole and add a tag. The TAGLOCK lockout devices are small enough to be applied on most circuit breakers that are positioned next to each other. Run a nylon cable tie through the holes of the applied circuit breaker lockout devices to block all circuit breakers involved in the off-position. A padlock can be attached for extra security when needed.