NON-CONTACT SWITCHES PROVIDE CAT.4 SAFETY FOR MULTIPLE MACHINE GUARDS
7th November 2007
Source:
Euchner (UK) Ltd
Non-contact switching in series – the new CES-AR-C from Euchner makes it possible to monitor several safety guards at once. Up to 20 devices can be included in one switch chain.
The non-contact safety switch CES-AR-C is particularly suitable for systems in which a large
number of safety guards need to be monitored. It can also be used as a very compact individual
switch.
The small housing accommodates a read head and an evaluation unit. When used in a switch chain, the individual switches are connected with each other by means of plug connectors. The end of the chain is connected to a safety relay or a safe PLC, for example.
The CES-AR-C features two safety outputs and pulsed signals for integrated short circuit monitoring. Two LEDs indicate the system status and facilitate diagnosis. The switch can be used for applications with the highest safety requirements up to safety category 4 in accordance with EN 954-1.
Like all non-contact safety switches in the CES series from Euchner, the CES-AR-C is also designed on the basis of proven transponder technology. This means high protection against tampering, a large operating distance and resistance to dirt and vibration. The housing offers IP67 degree of protection and is therefore suitable for operation under severe conditions.
number of safety guards need to be monitored. It can also be used as a very compact individual
switch.
The small housing accommodates a read head and an evaluation unit. When used in a switch chain, the individual switches are connected with each other by means of plug connectors. The end of the chain is connected to a safety relay or a safe PLC, for example.
The CES-AR-C features two safety outputs and pulsed signals for integrated short circuit monitoring. Two LEDs indicate the system status and facilitate diagnosis. The switch can be used for applications with the highest safety requirements up to safety category 4 in accordance with EN 954-1.
Like all non-contact safety switches in the CES series from Euchner, the CES-AR-C is also designed on the basis of proven transponder technology. This means high protection against tampering, a large operating distance and resistance to dirt and vibration. The housing offers IP67 degree of protection and is therefore suitable for operation under severe conditions.
Similar articles
More from Euchner (UK) Ltd
- The importance of machinery safety in current times 14th October 2020
- New multifunction safety device from Euchner 2nd June 2009
- Safety switches prevent trapping for machinery directive compliance 2nd March 2009
- Safety switches for where size is important 4th February 2009
Write a comment
No comments