Molex completes its Field-Attachable, External Thread mPm DIN Valve Connectors with the introduction of DIN Form C and Form Micro Connectors

12th January 2011
Posted By : ES Admin
Molex completes its Field-Attachable, External Thread mPm DIN Valve Connectors with the introduction of DIN Form C and Form Micro Connectors

IP67 sealing performance and superior cable retention for advanced performance and reliability WALLDORF, Germany – 16 December, 2010 – Molex Incorporated augments its range of externally-threaded Brad® mPm® DIN valve connectors with the addition of Form C and Form Micro housings; combining IP67 sealing properties with an external-thread design, the mPm DIN valve connector range provides superior cable retention for increased performance and reliability, simplifies the manufacturing process and reduces overall applied costs for hydraulic, pneumatic and electromagnetic drive systems.

The external nut on the new generation mPm DIN valve connector provides greater and consistent torque, which ensures good cable retention and high reliability. The Molex mPm DIN connectors achieve a sealing performance from dust and water to IP67. Cable retention force is increased by up to 115%, when compared to traditional internal nut designs. Molex’s innovative new design reduces the number of components in the connector, making customer assembly and secure mounting, easier and quicker.

“The Brad mPm DIN valve connector range is recognised throughout the industry globally and the name has become synonymous with high performance and reliability,” says Gilberto Rizzo, global product manager, fluid power, Molex. “In comparison to similar products on the market, the internal volume of the DIN Form C housing is increased by 30 percent with no change to the external dimensions of the connector; this improves overall handling, wire routing and speed of assembly over internal nut versions and, with no impact on space required by the customer’s application, can be used as a drop in replacement.”

Molex’s innovative external-nut design reduces the number of individual components within the DIN valve connector to simplify assembly and mounting processes. Since the housing of the new design does not protrude past the toe of the nut, the external width of the connector has not increased and thus has no impact on the customer’s application.

The Brad mPm range of DIN valve connectors from Molex conform to Industry Standard EN 175301-803 (formerly DIN 43650). This is the standard for a series of electrical connectors that is commonly used with solenoid valves, especially those used on valves in hydraulics and pneumatics systems.

Brad mPm DIN connectors from Molex are supplied “ready-to-use” disassembled in single sets, or as bulk components, which saves customers disassembly time per part and costs. They can accommodate PG9 and PG11 cable and up to 9mm cable outer diameter and, since one size fits all, the customer can reduce their connector inventory. To further reduce labour, pre-terminated and overmoulded mPm DIN valve connectors are also available in standard lengths.

Standard circuitry options available include light-emitting diode (LED) and bi-polar LED indicators, blocking diodes to protect against over voltage or peaks when switching off and voltage-dependent resistors (VDR) to protect supply and switch. For additional information about Brad mPm DIN valve connectors,


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex