Stepper motors offer 400 full step per rev motors

28th August 2015
Posted By : Jordan Mulcare
Stepper motors offer 400 full step per rev motors

Mclennan continues to expand its range of stepper motors from USA distribution partner Applied Motion Products (AMP) with new smaller sized high-torque stepper motors in NEMA frame sizes 8, 11 and 14 as well as a range of 400 full step per rev motors.

The miniature stepper motors will suit motion automation applications such as medical and laboratory equipment, camera controls, pumps and consumer electronics where installed space is limited but high torque and precision positioning is essential. The 0.9º stepper motors, featuring 400 full-steps or 800 half-steps per rev with normal stepper drives, will provide smoother and quieter performance than the standard 1.8º motors in applications where microstepping drives are considered too elaborate, not available or where a basic half step drive is already specified.

The new compact NEMA motors are all two-phase, four-lead bipolar connected and range from size 8, about 20mm square, to size 14 which is around 35mm square. Through the range the motor length is from around 26 to 53mm with available holding torque from 1.5 to 18Ncm. The 0.9º motors are offered in NEMA frame sizes 14, 17 and 23.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Hannover Fair 2019
1st April 2019
Germany Hannover