Sandvik Coromant

Address:
SE-811 81 SANDVIKEN
Sweden

Phone: +44 (0) 121 504 5422

Fax: +46 (0)26-266000

Web: http://www.sandvik.coromant.com


Sandvik Coromant articles

Displaying 21 - 40 of 111

New automation capabilities offer more intelligent manufacturing

New automation capabilities offer more intelligent manufacturing
Strengthening capabilitiesin Digital Manufacturing, Sandvik Coromant has signed a strategic research agreement with PARC, a Xerox company, world-renowned innovation centre. PARC will provide Sandvik Coromant with a footprint in Silicon Valley and expert resources for research and development in the field of Digital Manufacturing.
21st April 2017

Say hello to a revolution in turning: all directional turning solution

Say hello to a revolution in turning: all directional turning solution
A revolutionary turning concept has been unveiled by Sandvik Coromant which offers improved machining flexibility and the potential for significant productivity gains. The company’s PrimeTurning methodology and supporting tools provide manufacturers, particularly in aerospace and automotive sectors, with the industry’s first true ‘all directional turning’ solution.
3rd April 2017

Latest milling adaptors include higher metal removal rates

Latest milling adaptors include higher metal removal rates
Designed to offer improved damping characteristics are the latest Silent Tools milling adaptors from Sandvik Coromant. These advanced adaptors have been developed in direct response to the need for greater metal removal rates and reduced vibration wherever long, slender milling tools are deployed.
20th February 2017


Application range expanded for latest steel milling grade

Application range expanded for latest steel milling grade
The steel milling grade, GC1130, from Sandvik Coromant has been made available for use with CoroMill QD and CoroMill 331 groove milling cutters. GC1130, which is the latest Zertivo grade from Sandvik Coromant, delivers high metal removal rates and secure performance levels in both wet and dry machining operations.
6th December 2016

Efficient machining is set to benefit the aerospace industry

Efficient machining is set to benefit the aerospace industry
The range of CoroMill 390 Silent Tools from Sandvik Coromant has been updated in response to both the growth in quantity and complexity of structural aerospace components.
23rd November 2016

Machine and process monitoring system important for Industry 4.0

Machine and process monitoring system important for Industry 4.0
An advanced connectivity solution is being released by PROMETEC, part of Sandvik Coromant, the PROMOS 3+ system. Providing a first look at the world of Big Data and the Industrial Internet of Things (IIoT), it is considered an important component for the Industry 4.0 initiative from Sandvik Coromant.
14th November 2016

Machining of stainless steel turbo housings boosted

Machining of stainless steel turbo housings boosted
A product engineered specifically for the rough-machining of stainless steel turbo housings, has been introduced by Sandvik Coromant as the M612 face mill. The tool’s positive geometry has the effect of providing a smoother cutting action which helps machine shops to eliminate vibration. In turn, higher metal removal rates can be achieved, leading to shorter cycles.
25th October 2016

Milling cutter delivers high feed capacity

Milling cutter delivers high feed capacity
A high feed milling cutter for diameters 13-32mm (0.512-1.26”) has been introduced by Sandvik Coromant. Among the advantages of using the new CoroMill 415 are enhanced security, thanks to iLock insert seat interface technology, and high metal removal rates as a result of high cutter density and high feed capacity.
18th October 2016

Appy times for Sandvik Coromant

Appy times for Sandvik Coromant
  Grouping its online offerings within its new Ifind app, Sandvik Coromant is giving purchasers, engineers and machine operators a user-friendly option for the best possible support of their manufacturing processes.
4th October 2016

Graphene Challenge victory with filtration device

Graphene Challenge victory with filtration device
The winner of the Graphene Challenge has been announced by Sandvik Coromant. This competition, running from April to May 2016, invited worldwide individuals to submit ideas for sustainable innovations made from graphene to revolutionise a modern household.
26th September 2016

Connectivity brought to manufacturing plants

Connectivity brought to manufacturing plants
Unveiling its CoroPlus suite of Industrial Internet of Things (IIOT) solutions, is Sandvik Coromant, which is aimed at helping manufacturers prepare for Industry 4.0. The concept is designed specifically to improve the control of productivity and costs through a combination of connected machining and access to manufacturing data and expert knowledge.  
14th September 2016

Hard turning grades enhance speed and toughness

Hard turning grades enhance speed and toughness
Allowing manufacturers to enjoy benefits such as reduced cycle times and greater tool life when performing hard part turning, Sandvik Coromant has strengthened its existing offer in the ISO H05 to H15 application area with the introduction of two new grades, CB7105 and CB7115. The grades will be of particular benefit to those machining transmission components for the automotive industry, where lower cost per part can be achieved.
6th September 2016

Shops standardise through modular tooling

Shops standardise through modular tooling
  To manufacturers looking to tool-up a machine or an entire factory, the inherent modularity of three Sandvik Coromant tooling product families– Coromant Capto, Coromant EH and CoroTurn SL could prove highly advantageous.
19th July 2016

Dedicated tooling available for oil and gas valve seat pocket machining

Dedicated tooling available for oil and gas valve seat pocket machining
Sandvik Coromant is now offering tooling dedicated to the challenging operation of machining valve seat pockets in oil and gas applications. Comprised of a combination of an elliptical Silent Tools adaptor and CoroTurn SL cutting head, this solution is designed to overcome prevalent issues such as narrow flow bore diameters, vibration tendencies and long overhangs.
6th July 2016

Steel milling grade offers greater security and productivity

Steel milling grade offers greater security and productivity
Machine shops faced with identifying ways of achieving secure machining with long and predictable insert life in steel milling operations can turn to GC1130, an insert made with the Zertivo, a unique production technology from Sandvik Coromant. GC1130 helps to overcome challenging machining conditions with a clean and intact edge, delivering high metal removal rates and performance levels in both wet and dry machining operations. The grade is offered as the first choice for shoulder milling cutters, CoroMill 390 and CoroMill 490 and chamfer cutter, CoroMill 495.
8th June 2016

New CoroTurn 300 with iLock interface introduced

New CoroTurn 300 with iLock interface introduced
For longitudinal and face turning, Sandvik Coromant introduces the new CoroTurn 300 for higher component quality, increased handling efficiency and longer tool life in steel turning operations. Available immediately, the CoroTurn 300 features stable insert clamping, as well as eight-edged inserts for the high chip control, tool life and surface finish. 
8th March 2016

Sandvik Coromant exhibits at MACH on 11- 15 April, 2016

Sandvik Coromant exhibits at MACH on 11- 15 April, 2016
Known as the premier event for manufacturing technologies in the UK, Sandvik Coromant is proud to exhibit at MACH 2016, at the NEC Birmingham on 11 – 15, April. Ready to share their expertise, knowledge and vision for manufacturing challenges, Sandvik Coromant will present “Together we shape the future of manufacturing” at Stand 4676 Hall 4, adjacent to the Learning and Development Zone.
1st March 2016

New CoroMill 390 with size 07 inserts introduced

New CoroMill 390 with size 07 inserts introduced
Sandvik Coromant offers a new end mill for small diameters. The CoroMill  390 with size 07 inserts is a versatile cutter that is ideal for shoulder milling, deep shoulder milling, edging, linear and helical ramping, plunge milling, slot milling and face milling. From roughing to finishing, it offers reliability, precision and productivity.
25th February 2016

A tap that makes a difference in cast iron machining

A tap that makes a difference in cast iron machining
Sandvik Coromant has launched a new tap for use with cast iron. Designed to maximise machining productivity, CoroTap 100 – KM features the latest cutting edge technology and offers excellent results and process security.
8th December 2015

Plura HFS for side milling and pocketing operations

Plura HFS for side milling and pocketing operations
Sandvik Coromant launches a new series of end mills designed to deliver high performance and security in side milling and pocketing operations. 
24th November 2015


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EVM Asia Expo 2021
16th August 2021
Malasia Malaysia International Trade and Exhibition Centre
Ceramics Expo 2021
30th August 2021
United States of America Huntington Convention Center of Cleveland
Electronic Specifier Webinar Summit
1st September 2021
Afganistan Virtual Event
IoT Tech Expo
6th September 2021
United Kingdom Business Design Centre
The Engineering Design Show
19th October 2021
United Kingdom Coventry Building Society Arena, Coventry