Bosch Rexroth

Address:
15 Cromwell Road
St. Neots
Cambs
PE19 2ES
United Kingdom

Phone: +44 (0) 1480 223200

Fax: +44 (0) 1480 470789

Web: http://www.boschrexroth.co.uk


Bosch Rexroth articles

Displaying 1 - 20 of 38

Bosch Rexroth confirms partnership for Maintec 2018

Bosch Rexroth confirms partnership for Maintec 2018
It has been confirmed that Bosch Rexroth will be partnering the event Maintect, the UK’s only exhibition dedicated to maintenance, plant and asset management which will be held at the NEC, Birmingham 6-7th November 2018. Bosch Rexroth will be exhibiting at the event for the first time and join many other maintenance technology, asset management and plant equipment manufacturers and suppliers who have confirmed they will be returning to the show including; RMS, Megger, Fluke, Cordex, Shire Systems, Radwell, Pruftechnik and UE Systems.
21st May 2018

Setting IoT into motion with working hydraulics

Setting IoT into motion with working hydraulics
A new EDG valve block has been launched by Bosch Rexroth to translate IT commands into physical movement sequences for customised, connected warehouse processes. With the Internet of Things (IoT) fast becoming ubiquitous, the technology is making big inroads into the logistics industry.
12th April 2018

VR interactive rally car simulator at Industry 4.0 Summit

VR interactive rally car simulator at Industry 4.0 Summit
At the Industry 4.0 Summit Bosch Rexroth will be showcasing a number of award-winning connected solutions. From 28th February until 1st March 2018, Bosch Rexroth will display a range of systems and solutions on stand H10 – helping to make machines fit for the future. Delegates will have the opportunity to interact with latest advanced manufacturing technologies, as well as exploring the benefits of connectivity.
20th February 2018


Technology protects hydraulic systems and reduces operating costs

Technology protects hydraulic systems and reduces operating costs
Introducing a new range of hydraulic filter elements, Bosch Rexroth has designed them to incorporate new materials that deliver optimum performance while reducing operating costs through increased service life. The new range of elements, known as PURE POWER, has been designed using new micro-glass material to retain 50% more contaminant particles than the range it is replacing.
27th March 2017

Time for speeches at the Industry 4.0 summit

Time for speeches at the Industry 4.0 summit
  Delivering a speech at the Industry 4.0 Summit, drives and controls specialist Bosch Rexroth have a responsibility at one of the largest gatherings of solutions providers, innovators and technology buyers in Europe.
24th March 2017

Bosch Rexroth to showcase Industry 4.0 demonstrater unit

Bosch Rexroth will showcase its Industry 4.0 demonstrator unit for the first time in the UK, at this year’s Factories of the Future EXPO. From 4th-5th April 2017, Bosch Rexroth’s Connected Automation mini-assembly line will be providing a live demonstration of Industry 4.0 in action at the exhibition, which will be held at the Manchester Central Convention Complex.
8th March 2017

Design quality awarded to Industry 4.0 communication platform

Design quality awarded to Industry 4.0 communication platform
The interactive communication platform from Bosch Rexroth, ActiveCockpit, has achieved an international award for outstanding design quality. The ActiveCockpit software received the ‘Special Mention’ award in the human interface category for its innovative design, at the German Design Award event.
3rd March 2017

Heavy-duty connectors withstand static and dynamic loads

Heavy-duty connectors withstand static and dynamic loads
A new range of modular heavy-duty connectors has been introduced by Bosch Rexroth, bringing even greater flexibility to the use of machine frames made from aluminium strut profiles. Complementing Bosch Rexroth’s extensive existing line-up, the 180x180 dynamic load connectors have undergone extensive testing by the Fraunhofer-Gesellschaft for the safe absorption of both high static and dynamic loads. 
1st March 2017

Interactive platform to play a part in UK's smart manufacturing

Interactive platform to play a part in UK's smart manufacturing
A new interactive communications platform has been launched by Bosch Rexroth, which is aiming to play a key role in the adoption of smart manufacturing in the UK. As part of the company’s Industry 4.0 ready products, software and solutions, ActiveCockpit collates, filters and visualises data continuously, enabling operators to react quickly to any changes to the production process.
10th February 2017

Intelligent pump control via multi-Ethernet

Intelligent pump control via multi-Ethernet
  A new range of intelligent pump controllers have been introduced by Bosch Rexroth, which offer unrivalled performance and flexibility as well as readiness for Industry 4.0, across a broad spectrum of applications, both with and without control cabinets.
3rd February 2017

New era introduced in maintenance best practice

New era introduced in maintenance best practice
A new system has been introduced by Bosch Rexroth, which is set to minimise down-time by bringing greater accuracy to predictive maintenance techniques across a broad spectrum of applications. ODiN Predictive Maintenance uses machine learning methods to generate knowledge on the state of health of equipment from recorded sensor data, to enable reliable predictions about likely time to failure – a key attribute given the widening adoption of Industry 4.0 techniques.
19th December 2016

Gear pumps give mobile applications the silent treatment

Gear pumps give mobile applications the silent treatment
Businesses face the growing concern of diesel exhaust and noise pollution; however the agricultural sector has always had this issue to face. Hydraulic systems have many applications and benefits, but few people would associate their use with a quiet working environment, until now.
5th December 2016

Rapid set-up upgrades position measuring system

Rapid set-up upgrades position measuring system
The IMS-A position measurement system from Bosch Rexroth has been enhanced by a DRIVE-CLiQ interface, enabling even more rapid set-up. A robust and accurate measuring system, the IMS-A is, uniquely, fully integrated in the linear guide - resulting in a mechatronic system which combines the functions of guiding mechanical loads and measuring their absolute positions in a single unit.
21st November 2016

Clever Packaging, Simple Machines

Clever Packaging, Simple Machines
Sweden based packaging specialist Ecolean, wanted to achieve substantially reduced filling times, clean packaging processes and easy machine operation.
8th August 2011

Turning Theatrical Visions into Reality with State-of-the-art Technology

As The Drive & Control Company, Bosch Rexroth is a leading force in stage technology. By providing solutions to meet the most sophisticated requirements, stage directors can be confident of an enhanced experience for the audience.
25th July 2011

Winners of The Bosch Technology Horizons Award Announced

The 2010 winners of The Bosch Technology Horizons Award have been announced at a prestigious event held at the Royal Academy of Engineering in London.
15th July 2010

Rexroth’s new TS 5 Transfer System handles loads up to 300kg

Rexroth’s new TS 5 Transfer System handles loads up to 300kg
The TS 5 from Bosch Rexroth is a heavy-duty, modular conveyor system designed for the transport of workpieces with loads of up to 300kg/m. With an innovative line-shaft design, robust support system, intelligent routing options and maintenance-free operation the TS 5 is well-positioned to become the conveyor of choice in automotive, appliance and other large format applications.
3rd April 2009

New Electronic Pressure Switch from Bosch Rexroth

New Electronic Pressure Switch from Bosch Rexroth
Flexible in design, Bosch Rexroth’s compact PE5 electronic pressure and vacuum switch is easy to operate and install, with three ergonomically-arranged buttons and numerous pneumatic connection options. The fully IP65-protected switch features a large, four-digit LCD display that is easy to read, and the pressure units shown can be tailored to suit the environment.
27th February 2009

A new framework for evaluating sustainable technologies

A new framework for evaluating sustainable technologies
Standard components from the Rexroth mechanical elements and linear motion ranges have provided a convenient, versatile and cost effective solution to the challenge of mounting and controlling a half-tonne lamp array at the heart of a new state-of-the-art solar simulator facility. This simulator developed by the Centre of Sustainable Technologies (CST) at the University of Ulster will be used to evaluate the performance of photovoltaic (PV) panels, solar water heaters, evacuated glazing and similar products.
10th February 2009

Bosch Rexroth launches Innovative Strategy for Automation

Bosch Rexroth launches Innovative Strategy for Automation
To address the needs of modern industry Bosch Rexroth has launched a strategy for automation that will enable UK machine builders to become more competitive within the global market.
30th January 2009


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex