Audon Electronics

The Circuitgear CGR-101 from Audon Electronics is a PC-based instrument that provides the features of seven devices in one USB-powered compact box. The device offers the performance of a two-channel 10-bit 20MSa/sec 2MHz oscilloscope, a two-channel spectrum-analyser, and a 3MHz 8-bit arbitrary-waveform/standard-function generator with eight digital I/O lines. It also functions as a network analyser, a noise generator and a PWM output source. Its open-source software runs with Windows, Linux and Mac OS.

The TBox20 is a low cost solution to Remote Control and Monitoring via your mobile phone. The TBox20 can monitor 2 analogue and 4 digital switch inputs. A SMS alarm message can be sent when inputs exceed preset limits. The user can also interrogate the inputs through SMS messaging. The TBox20 also has 4 relay outputs which can be activated via SMS and used to switch lamps, pumps, heaters etc

Available from Audon Electronics is the new EDAM-9000 range of low-cost Ethernet based industrial data acquisition and control RTU devices. The EDAM-9000 range is based on common 10/100 Ethernet networking standards and supports the popular Modus/TCP protocol. The EDAM-9000 also supports UDP protocol over Ethernet networking.

The PDS7102 from Audon Electronics is a full-featured 100MHz two-channel bench-top oscilloscope with 8bit resolution, perfect for any Engineer’s or Technicians desk. With a large 7.8 640 x 480 colour LCD, the PDS7102 is small enough and light enough to carry anywhere. With a buffer size of 6K samples, PDS7102 sampling range is 500MSPS with synchronous 8-bit sampling on both channels. Sensitivity range is 5mV/div~5V/div. The USB connection makes printing stored results easy.

The RedLab-1608FS is a low cost 8 channel, 16-bit data acquisition unit featuring simultaneous sampling on all input channels. The RedLab-1608FS is ideal for applications that require higher sampling rates per channel such as transient signal analysis or simultaneous acquisition of data for phase sensitive applications.

The eNET range of Ethernet to Serial converts, available from Audon Electronics, are a simple way of connecting any serial device, whether RS232 or RS485 to a Ethernet network. They feature a simple setup procedure, ease of operation and automatic network recovery. Supplied with Programming examples and Virtual Serial Port software, to seamlessly add serial ports to your Network.

Available from Audon Electronics is the RedLab-TC, a new, low-cost USB based thermocouple data acquisition unit. The RedLab-TC provides eight temperature inputs, 8 bits of digital I/O, 500 V of isolation, and built-in ambient temperature sensing, for only £239. Supplied with free chart recording software, and drivers for most DAQ packages and programming languages.

The CUSB range from Audon Electronics are low-cost open-frame PLCs based on the CuBloc core processor running both BASIC and Ladder-logic programs.

New from Audon Electronics is the USB-AD16F high speed USB based multifunction I/O unit with 16 opto-isolated analogue inputs, 2 analogue output, 4 digital inputs and 4 digital outputs. Data can be acquired at up to 250kHz rate at 16-bit resolution. A range of analogue and digital expansion boards are also available. Supplied with a free copy of NextView4-Live software for data acquisition and control and a wide selection of Windows, MAC and Linux programming examples.

Available from Audon Electronics is the USB-AD USB based multifunction I/O unit which is so small it could be mistaken for a connector. The USB-AD has 16 analogue inputs, 1 analogue output, 4 digital inputs and 4 digital outputs all enclosed in a standard 37-way D-type connector housing. Supplied with a copy of NextView4-Live software for data acquisition and control and a wide selection of Windows, MAC and Linux programming examples.

Available from Audon Electronics is a new range of low-cost Modbus based remote IO units which provide a simple way of integrating analogue or digital signals to supervisory SCADA systems. There are several models in the range from voltage, current, thermocouple and PT-100 inputs, voltage and current outputs and digital and relay I/O. Supplied with the IO Studio configuration software. The optional DAQ Studio software can be used to provide a data acquisition, trending and alarm management interface for the PC. Also compatible with all SCADA packages such as DAQFactory.

The UDIN range are a low-cost range of USB relay, digital I/O units for desk-top, panel or industrial DIN rail mounting. They feature mains rated relays capable of switching mains 3A and fully opto-isolated digital inputs. They do not require any external PSU. All units come with both Virtual Com port drivers so that they can be used with most legacy software packages or with a .DLL for direct programming. Supplied with cable, test programs and programming examples.

The GL800 data logger and hand-held chart recorder is one of a kind in its ability to read up to 200 channels of temperature, humidity and voltage data. With its large format LCD display, you can easily set up and capture data with the ability to monitor waveforms and digital values during measurements. Its instant replay function makes it easy to review data that has been captured to internal memory or to a USB memory stick. Standard PC interface makes GL800 accessible through USB or a LAN using the standard network settings built in to GL800

The PDS5022S bench Digital Storage Oscilloscope has been specifically designed as an entry level instrument for educational, hobby and budget-driven applications. Although low-cost, the PDS5022S is packed with a wide range of useful functions usually only seen on higher-end DSO's, such as video trigger and auto-measurement. The large full colour LCD display makes for a clear unambiguous waveform display.

The U120816 is a very low cost USB data acquisition module which provides eight single-ended 12-bit analogue inputs, 16 digital I/O lines, two programmable pulse-width output channels, and one 16-bit counter channel. Analogue sampling rate is 32 ksamples/s maximum, with up to 13 ksamples/s for all 8 channels.

The Poseidon 3268 is a simple Ethernet based stand-alone device which can send an email alarm when up to 4 monitored temperature or humidity sensors exceeds their defined range. The Poseidon 3266 also has 4 contact-closure inputs which can be used to trigger alarms on state change and there are 2 relay outputs which can be used to reset servers, or switch on a fan, etc.

Audon Electronics now stock the CUTOUCH CT1721, an integrated Touch panel, 5.6 graphic LCD, and programmable embedded computer. Based on Comfile’s PLC-on-a-chip technology, the CUTOUCH CT1721 provides fast processing speed, 82 digital I/O ports, 8 channels of 10-bit A/D, 6 x 16-bit PWM outputs, and 80KB Flash Program memory so you can quickly develop HMI devices for industrial machines, factory temperature controllers, packing machines, robots and embedded control.