The RedLab 1608FS offers true simultaneous sampling of up to eight channels of 16-bit single-ended analogue input. This is accomplished through the use of one A/D converter per channel. The range of each channel is independently configurable via software. Eight digital IO lines are independently selectable as input or output.
Multiple-channel continuous sampling rates up to 100 kilosamples/sec total, where the maximum sampling rate per channel is 50 kilosamples/second (2 channels can be sampled at 50 kS/s, 3 channels at 33.3 kS/s, 4 channels at 25 kS/s etc.). A burst mode is also provided that allows 4 channels to be sampled at 50 kS/s each for up to 32,768 total samples. Input ranges of ±10V, ±5V, ±2V and ±1 volt are software selectable and each channel may be set at any of the four ranges independent of other channels.
A SYNC (synchronization) control line allows you to synchronize two RedLab 1608FS modules together to acquire data synchronously from 16 analogue inputs.
A 32-bit counter is capable of counting TTL pulses. The RedLab 1608FS is powered by the +5 volt USB supply from your computer. No external power is required.
Supplied with free chart recording software, and drivers for most DAQ packages and programming languages.
Write a comment
No comments