High Resolution Fast Camera for Industrial Applications - Photonfocus MV2-D1280 Camera series
25th July 2008
Photonfocus has launched its camera series MV2-D1280-640, which has been developed for industrial applications requiring very high frame rates.
Very fast 1.3 megapixel sensor with 488 frames per second output
The camera series features a micron CMOS sensor with 1280 x 1024 pixel resolution. Utilizing global shutter the MV2-D1280 is capable of speeds of up to 488fps at full resolution and higher frame rates are possible with reduced Region of Interest (ROI).
CameraLink(R) Full interface with 8 and 10 tap mode
The double connector, at the back of the camera, offers the high speed CameraLink(R) Full interface. The new Photonfocus camera features selectable 8 or 10 tap output modes. A feature of the 10 tap mode is its adjustable clock rate to enable lower clock rates and allow for longer CameraLink(R) cable lengths without risk of data loss.
The MV2-D1280-640 boasts many advanced features including: MROI (Multiple Region of Interest), Decimation, CFR (Constant Frame Rate), Offset and Gain correction on camera (Shading Correction).
This new 1.3 megapixel camera is easy-to-use, has an excellent advanced feature set and will no doubt be a great asset for integrators and users when handling demanding applications that require very high frame rates.
The camera series features a micron CMOS sensor with 1280 x 1024 pixel resolution. Utilizing global shutter the MV2-D1280 is capable of speeds of up to 488fps at full resolution and higher frame rates are possible with reduced Region of Interest (ROI).
CameraLink(R) Full interface with 8 and 10 tap mode
The double connector, at the back of the camera, offers the high speed CameraLink(R) Full interface. The new Photonfocus camera features selectable 8 or 10 tap output modes. A feature of the 10 tap mode is its adjustable clock rate to enable lower clock rates and allow for longer CameraLink(R) cable lengths without risk of data loss.
The MV2-D1280-640 boasts many advanced features including: MROI (Multiple Region of Interest), Decimation, CFR (Constant Frame Rate), Offset and Gain correction on camera (Shading Correction).
This new 1.3 megapixel camera is easy-to-use, has an excellent advanced feature set and will no doubt be a great asset for integrators and users when handling demanding applications that require very high frame rates.
Similar articles
More from Adept Electronic Solutions Pty Ltd
- Compact and cute, the one-cable iDS CP family of GigE cameras is a real innovator 8th June 2011
- NEW! 4-CCD prism camera: simultaneous, separate capture of Red, Green, Blue and Infrared 10th November 2010
- Sensor Upgrade Delivers Up To 40 fps At Exceptional Sensitivity, With 1.2 Megapixels And NIR 12th October 2010
- Two For One: A New Solution To An Old Problem Adept Machine Vision Offers The Single Lens, Multi-spectral Jai Camera 6th October 2010
Write a comment
No comments