Control Systems

Displaying 701 - 710 of 728

OEM Servo Motor Controller with CAN

OEM Servo Motor Controller with CAN
QuickSilver has added a CAN option to its smallest (2”/52mm x 2.5”/63mm) most cost effective servo motor controller. CAN can be configured for peer-to-peer, master or slave which allows the controllers to share I/O and registers with other CANopen enabled SilverDust controllers or 3rd party CANopen devices (i.e. I/O blocks, encoders, PLCs…). For a multi-axis system, connect several MG-Cs, make one the master and let the others receive motion commands over CAN.
28th April 2008

Encoders go wireless with BEI’s SwiftComm™ interface

Encoders go wireless with BEI’s SwiftComm™ interface
Real-time wireless control is finally a reality with BEI Industrial Encoders’ introduction of Swiftcomm, a wireless interface for encoders. SwiftComm was designed from the ground up for motion control applications, providing an extremely robust wireless signal in real time over a secure network. Unlike other wireless technology such as Wi-Fi, SwiftComm’s fast boot-up and transmission time allow it to seamlessly interface with existing control systems. Simply connect the SwiftComm transmitter to your encoder and the SwiftComm receiver to your control system and apply power. Costly and time-consuming cabling can now be a thing of the past.
4th April 2008

Maximise laboratory productivity with NitroVap nitrogen generators

Maximise laboratory productivity with NitroVap nitrogen generators
The Process Filtration Division of Parker Hannifin has launched a range of bench or wall mounted nitrogen generators for use with sample concentrators and evaporators. The NitroVap-1LV and NitroVap-2LV generators are able to maximise productivity by providing a constant supply of gas, eliminating the downtime associated with conventional supply methods.
3rd April 2008


Burkert’s IP65/IP67 Freeline Process Automation System Removes The Requirement For Control Cabinets In Process Applications

Burkert’s IP65/IP67 Freeline Process Automation System Removes The Requirement For Control Cabinets In Process Applications
Burkert’s new FreeLINE 8645 is a completely decentralised process automation solution with a higher type of protection IP65/IP67, offering all the freedoms of distributed I/O systems without the cost and complexity of installation in control cabinets.
28th March 2008

SafetyBUS p input module is sealed to IP67

SafetyBUS p input module is sealed to IP67
Pilz Automation Technology is launching a new IP67 digital input module for use with SafetyBUS p, the safe, open industrial fieldbus system. This will help to save costs for machine builders and system integrators as it can be installed directly on the machine, thereby avoiding the need for the inputs to be connected inside a control cabinet. Not only can this eliminate the cost of a cabinet, but it also reduces the work involved in planning and installation, which helps to save valuable engineering time.
27th March 2008

Parker natural gas filters minimise costs

Parker natural gas filters minimise costs
The Process Filtration Division of Parker Hannifin has launched its latest range of natural gas filtration solutions, developed to improve the efficiency of gas production processes and extend the service life of equipment. Due to their robust design, the ZA-, ZJ- and FFC-Series filters are able to remove contaminants that would quickly impair the performance of conventional filters, considerably reducing maintenance requirements and costs for users.
20th March 2008

New FOUNDATION fieldbus and PROFIBUS PA Communication Capabilities for Eclipse® Model 705

Magnetrol’s newest PACTwareTM DTM is designed for use with the Eclipse Model 705 with FOUNDATION fieldbusTM communication. Through Magnetrol’s introduction of the free PACTware in 2007, many Eclipse 705 users have discovered its advantages. The actual HART® DTM’s are all certified and tested for full compatibility through dtmINSPECTOR, which is the official test protocol that verifies the compatibility of DTM’s with all FDT related technology.
10th March 2008

Take control of your nitrogen supply with the NitroSource HiFluxx from Parker

Take control of your nitrogen supply with the NitroSource HiFluxx from Parker
The Process Filtration Division of Parker Hannifin has launched the latest addition to its range of industrial nitrogen generators, the NitroSource HiFluxx, enabling companies in a wide variety of industries to take control of their nitrogen supply, cutting costs and improving productivity as a result.
10th March 2008

IP69K Encoders Offer Hi-Res 4-20mA or 0-10V Analog Outputs

IP69K Encoders Offer Hi-Res 4-20mA or 0-10V Analog Outputs
Micronor's ENA361 (Hollow Shaft) and ESA361M (Solid Shaft) are extremely rugged, single turn absolute encoders with high resolution (12-bit internal) analog outputs, these units are ideal for industrial automation and process control applications operating in the harshest environments where either 4-20mA or 0-10V outputs are desired.
7th March 2008

PC/Ethernet data acquisition and control hardware now available through Adept Scientific

Adept Scientific is pleased to announce United Electronic Industries’ PC/Ethernet data acquisition and control systems have been added to their range of products.
5th March 2008


Control Systems documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Girls in Tech | Catalyst | 2019
4th September 2019
United Kingdom The Brewery, London
EMO Hannover 2019
16th September 2019
Germany Hannover
New Scientist Live 2019
10th October 2019
United Kingdom ExCeL, London
Engineering Design Show 2019
16th October 2019
United Kingdom Ricoh Arena, Coventry
Maintec 2019
30th October 2019
United Kingdom NEC, Birmingham