EMKA (UK) Ltd

Address:
Patricia House
Bodmin Road
Coventry
CV2 5DG
United Kingdom

Phone: 024 7661 6505

Fax: 024 7661 2837

Web: http://www.emka.co.uk


EMKA (UK) Ltd articles

Displaying 21 - 40 of 121

Hygiene gaskets for HVAC and food industries

Hygiene gaskets for HVAC and food industries
Supplying gaskets to specialist panel builders for the HVAC and Food industries, EMKA UK offer a range of gasket profiles to meet the particular requirements of these industries in terms of their sealing capabilities and their specific hygiene characteristics. These profiles are covered by guideline 6022 issued by the VDI association which describes the minimum hygienic standards for ventilation and air conditioning systems. 
20th April 2018

Gasket profiles design especially for enclosures and vehicles

Gasket profiles design especially for enclosures and vehicles
Carrying an extensive stock of standard gasket profiles for enclosures, cabinets, vehicles, HVAC and similar, specialist hardware company EMKA have extruded sections which provide a simple and effective means of sealing to common IP ratings such as IP44, IP55, IP65, IP66.
5th April 2018

Pin hinge solution to specialist enclosure doors and panels

Pin hinge solution to specialist enclosure doors and panels
Putting together a quick, simple, low cost and reliable pin hinging solution for specialist enclosure doors and panels, is what the engineers at EMKA have done. Its range of pin hinges offer a quickly demountable installation with no loss of the pin – which is retained and spring loaded.
6th March 2018


Hinges for flush cabinet doors offer better security

Hinges for flush cabinet doors offer better security
  Designed specifically for fitment of flush doors to specialist enclosures and cabinets, the EMKA range of hinges, to enable a smart clean look coupled with improved security since the close fit of an inset door minimises access for tools and other pry bars.
23rd February 2018

Solving the prominent door hinging dilemma

Solving the prominent door hinging dilemma
A question that specialist enclosure/cabinet builders are often faced with is: “How do I hinge my prominent cabinet door robustly and aesthetically?” Usually asked along with the caveat that it must be quick to fit and at reasonable cost. Well, typically, EMKA have a solution in their modular range of prominent door hinges to suit standard 20mm or 25mm returns, and even down to 6mm.
6th February 2018

Rod Lock systems maximise cabinet sealing

Rod Lock systems maximise cabinet sealing
Operating with traditional round or new flat rod designs, the EMKA rod locking systems are sited within the door gasket area where they enable multi-point closure for optimal gasket pull-down. They can help in achieving IP65 levels or higher if matched with a suitable lock mechanism from EMKA’s modular program of swinghandles, quarter-turns and traditional L/T handles.
23rd January 2018

The lifthandle tha fits exceptionally small spaces

The lifthandle tha fits exceptionally small spaces
  Measuring in at a mere 38mm wide and 260mm long, the EMKA 1390 lifthandle is not to be underestimated as it offers full multi-point rod lock security for specialist cabinets and enclosures.
9th January 2018

Multi-point security 1190 lifthandle enables outside sealing

Multi-point security 1190 lifthandle enables outside sealing
  The novel 1190 lifthandle series from EMKA now offers a particularly narrow handle escutcheon and rod lock mechanism which enables mounting outside the door sealing area with an especially narrow margin.
5th January 2018

Vandal resistance and electronic operation in new swinghandle range

Vandal resistance and electronic operation in new swinghandle range
  The new 1317 program of IP65 swinghandles from EMKA offers a single design concept for exterior or indoor use providing the security of dual locks, RC2 level vandal resistance, remote electronic operation and a padlockable option.
3rd January 2018

Extensive portfolio offers over 30 designs

Extensive portfolio offers over 30 designs
  Manufacturer, EMKA has accumulated an extensive portfolio of modular design swinghandles, lifthandles and escutcheons for enclosures, cabinets, access panels and general industrial use to make life easier for specialist panel builders.
2nd January 2018

Heavy duty latches for 3 point cabinet locking systems

Heavy duty latches for 3 point cabinet locking systems
The heavy duty range of latches from EMKA are designed for cabinets to provide robust 3 point locking for heavy or large format cabinet doors, such as used for machine controls or power distribution in industrial/engineering environments. These heavy duty latch mechanisms are available for screw-on or weld-on fitment with roller ended round rods running in either weld-on or quick-fit plastic rod guides.
7th November 2017

Save time and money with clip fix enclosure locking program

Save time and money with clip fix enclosure locking program
  The new 1500 clip fix quarter-turn locking program from EMKA is specifically designed for time saving in pressured assembly areas. This is so it can ensure high levels of enclosure sealing and presentation with minimum effort.
11th October 2017

Getting closure with EMKA's range of industrial quarter-turn latches and locks

Getting closure with EMKA's range of industrial quarter-turn latches and locks
  EMKA’s range of industrial quarter-turn latches and locks offer a quick, simple and affordable solution to a huge variety of closure situations with a practical modular design concept - now enhanced with a wide range of important accessories to ensure proper fitment and performance.
29th September 2017

Small and medium quarter-turn latches/locks in new EMKA catalogue

Small and medium quarter-turn latches/locks in new EMKA catalogue
  The new 2017/2018 EMKA catalogue describes the Program 1012 and 1022 quarter-turn latches and locks in their small to medium size range, for use on small cabinets, wall mounted enclosures, control desks, machine controls, boxes and instrument cases.
22nd September 2017

Cabinet swinghandle system features swappable cylinders

Cabinet swinghandle system features swappable cylinders
  The EMKA 1325 swinghandle system is an IP40/IP65 modular design which readily facilitates resetting of lock formats at any stage - from profile half cylinder to electromechanical round cylinder or insert lock.
5th September 2017

Specialist cabinets and enclosures with quarter-turn locks

Specialist cabinets and enclosures with quarter-turn locks
Designed to meet the needs of specialist cabinet and enclosure manufacturers for reliable door closure in industrial and outdoor situations, the Program 1000 range of quarter-turn locks has been derived from EMKA’s engineering experience in modular hardware.
9th August 2017

Locks, handles and hinges available on newly designed website

Locks, handles and hinges available on newly designed website
EMKA have re-launched their website covering enclosure and cabinet hardware – from locks and swinghandles to hinges, handles and gasket sealing profiles. The freshly new designed website is technical with search engine optimisation and presentation in ten languages to ensure that customers can find it and navigate easily.
11th July 2017

Looking at enclosure hardware security issues

Looking at enclosure hardware security issues
  A white paper has been written by EMKA’s Managing Director, Andy Billingham, in which discusses how new demands in the area of industrial security drive a continuous development process in tandem with new materials and production technologies.
16th June 2017

EMKA Catalogue has even more locking technology

EMKA Catalogue has even more locking technology
The 2017/2018 general catalogue from EMKA has now been released, and is packed full of established products and many new ones. These include quarter-turn locks and latches, an extensive modular programme of swinghandles with matching rod locking systems and enclosure/cabinet sealing gasket profiles.
9th June 2017

Specialist enclosure locks, handles, hinges and gasket for HVAC panels

Specialist enclosure locks, handles, hinges and gasket for HVAC panels
Rapidly changing with a trend to natural refrigeration systems, the global HVAC industry still needs controls and compartments. Such systems match the needs of a growing building industry worldwide including stores and offices with a parallel demand for large HVAC installations.
30th May 2017


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex