Designed for maintenance and general light fabrication welding using mild steel, stainless steel and aluminium, it is particularly suited for intensive welding using 1.2mm diameter and on occasions 1.6mm diameter welding wires on either 200mm or 300mm diameter spools.
This machine is rated 370A @ 25% duty cycle at 40°C and 210A @ 100% duty cycle at 40°C.
Features include 3 ‘Easy Control’ welding functions – normal welding, spot welding with adjustable spot diameter and delay spot welding with spot welding time adjustment between two spots, whilst the ‘synergic welding’ mode provides the user with fast and easy setting, by simply turning the control on the front panel to ‘optimal synergic’ then inputting the wire type, the wire diameter and the power and the equipment will automatically set the optimum wire speed setting ready to weld. In the ‘synergic welding’ mode the machine is factory set for Ar/CO2 for mild steel welding, to set for CO2 simply use the control panel
Using the normal manual welding mode, the wire feed speed can be adjusted between 1 – 22m per minute and the voltage can be set using the 14 step switch.
Options available include a 4m. long 350A long torch and earth clamp.
Write a comment
No comments