Designed for maintenance and general fabrication welding using mild steel, stainless steel and aluminium, it is particularly suited for heavy duty welding of mild steel and stainless steel using 1mm. diameter wire.
This 3-phase, 7,5 kVA, 400V 50/60Hz machine is rated 220A @ 35% duty cycle at 40°C and 150A @ 60% duty cycle at 40°C.
Features include 3 welding functions – normal welding, spot welding with adjustable spot diameter and delay spot welding with spot welding time adjustment between two spots, whilst the ‘synergic welding’ mode provides the user with fast and easy setting, by simply turning the control on the front panel to ‘optimal synergic’ then inputting the wire type, the wire diameter and the power and the equipment will automatically set the optimum wire speed setting ready to weld. In the ‘synergic welding’ mode the machine is factory set for Ar/CO2 for mild steel welding, to set for CO2 simply use the control panel
Using the normal manual welding mode, the wire feed speed can be adjusted between 1 – 15 m per minute and the voltage can be set using the 10 step switch.
The equipment comes supplied with a 4m. long 250A long torch and earth clamp, whilst an accessory pack containing contact tips, contact tip supports, nozzles and springs is available as an option.
Write a comment
No comments