Fluke offers a free 2-pole tester with a Multifunction Installation Tester or a PAT Tester

11th September 2012
Posted By : ES Admin
Fluke offers a free 2-pole tester with a Multifunction Installation Tester or a PAT Tester
Fluke UK is offering a free Fluke T5 two-pole tester to purchasers of a Fluke 1653B/1654B Multifunction Installation Tester or a Fluke 6500 PAT Tester. A Fluke T5-1000 can be claimed free following purchase of a 1654B or 6500, while a T5-600 is free following purchase of a 1653B.
The purchaser simply downloads an offer form from the Fluke web site and sends it direct to Fluke with the proof of purchase from a Fluke authorised distributor or wholesaler.

The Fluke T5 two-pole Electrical Testers check voltage, continuity and current with one compact tool. The user selects volts, ohms, or current and the tester does the rest. OpenJaw™ current enables checking of current up to 100A - without breaking the circuit. The tough test leads accept optional accessories such as clips and specialty probes and stow neatly in the back of the tester, while an optional H5 holster enables clipping to a belt. The T5-1000 measures to 1000V and the T5-600 measures to 600V.

The extended memory Fluke 1654B Multifunction Installation Tester is designed for high productivity testing and verification of virtually all electrical wiring installations in domestic, commercial and industrial applications to meet the latest BS7671 IEE 17th Edition wiring regulations, while offering smooth DC-sensitive RCD type B testing and milliohm resolution for loop and line testing. The Fluke 1653B is the ideal tester for professional trouble-shooters working in both domestic and commercial applications. Stored test results on site can be uploaded later to a computer for the preparation of professional reports.

The Fluke Multifunction Installation testers show two measurements at once on a dual display. This can show PEFC/PSC and loop impedance results in parallel negating the requirement to run the tests separately, more than halving the test time of some loop testers. They also feature a high-current loop test which gives extremely fast measurements when testing in circuits where no RCDs are being used. They offer both non trip and the high current test so the user can select depending on the application. In addition there is fast voltage measurement between L-N, L-PE and N-PE using the mains cord, with no need to change measurement connections.

The rugged, easy-to-use, all-in-one Fluke 6500 PAT Tester features all the required tests necessary to comply with the most recent revisions to the IET Code of Practice and conforms to safety standard EN61010, while offering ‘one touch’ operation and fast throughput. Fully automatic, the tester offers pre-set and user-programmable test sequences which are initiated from a single button – speeding up test procedures and reducing time on site. It features an integral QWERTY keyboard for rapid data entry plus a large backlit graphics display for showing informative Help screens and detailed data formats. A Compact Flash memory facility enables backing up of the internal memory and speedy transfer of measurement data to a PC.

The Fluke 6500 offers 25A and 200mA earth bond tests, insulation test, touch current test, substitute current test, load/leakage test, PELV test, IEC lead test and extension lead testing. It features a built-in carrying handle and weighs only around 3kg.



You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex