DIN rail power supplies are slim and space-saving

16th April 2019
Posted By : Mick Elliott
DIN rail power supplies are slim and space-saving

DIN rail power supplies from Siemens, which are suited to a wide range of industrial automation applications are now available at RS Components. Designed for use in distributed power applications in machine control boxes or in small cabinets, the single-phase SITOP PSU6200 power supplies are slim and space-saving, with plug-in terminals that support easy electrical connection.

A key feature of the series is its very low power loss across the entire load range, especially in idle mode, which makes the units ideally suited for automated machines in plants that are often in standby operation.

Featuring wide-ranging DC-compatible input voltages from 85 to 275V(AC) or 99 to 275V(DC), the series delivers output DC voltages from 12 to 15.5V at 2A, 7A, 12A, or 24 to 28V at 1.3A, 2.5A, 3.7A, 5A, 10A, 20A (depending on model).

Overall, the characteristics, in conjunction with the series’ wide operating temperature range, means they can be deployed in multiple industrial application options.

Another key feature of the series is the integration of advanced diagnostic capabilities, enabling the units to indicate their operating status and current utilisation, as well as end-of-service life via LEDs.

They also output a serial code via the diagnostics interface, which can be read via a digital input on a PLC and evaluated by a function block.

Status and operating parameter information includes: DC ok; utilisation percentage levels; remaining service-life warning – for a value below 10%; output current and voltage to 1A and 0.1V resolutions, respectively; and device temperature warnings.

The SITOP PSU6200 series from Siemens is shipping now from RS in the EMEA and Asia Pacific regions.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EMO Hannover 2019
16th September 2019
Germany Hannover
Engineering Design Show 2019
16th October 2019
United Kingdom Ricoh Arena, Coventry
Maintec 2019
30th October 2019
United Kingdom NEC, Birmingham