T&M and Monitoring

Displaying 11 - 20 of 1862

Motor drive analysers leverage oscilloscope platform

Motor drive analysers leverage oscilloscope platform
The MDA 8000HD Motor Drive Analysers launched today (October 1) by Teledyne LeCroy leverage the WaveRunner 8000HD High Definition Oscilloscope (HDO) platform of eight analogue channels, 12-bit vertical resolution at all times, up to 5 Gigapoints of acquisition memory (1.25 Gigapoints on all eight channels), 10 GS/s sample rate, and bandwidths up to 2GHz.
26th September 2019

Substation saves substantial costs from a chance thermal scan

Substation saves substantial costs from a chance thermal scan
During a routine inspection at a substation, a Pacific Gas and Electric (PG&E) electrician felt heat blast his face as he passed within a couple of metres of an energised transformer bank. Some heat is expected, of course, but the intensity of it alarmed him. He immediately grabbed a handheld thermal imaging camera from his van and verified that there was a major issue and the system was shut down for investigation.
18th September 2019

Motor drive analysers enable fast error detection

Motor drive analysers enable fast error detection
Now available at Conrad Electronic are Fluke’s new MDA-510 and MDA-550 motor drive analysers. They offer accurate and fast error analysis on complex single and three phase variable speed drives, and provide the user with an effective tool to detect and correct typical errors.
13th September 2019


Testers, probes join Conrad product line up

Testers, probes join Conrad product line up
A full range of more than 180 electrical testers and diagnostic equipment products from Benning have been added to Conrad Electronic’s range. In addition to electrical testers and test equipment, Benning’s broad range of products include digital handheld multimeters, digital current probes, device testers, installation testers, photovoltaic measuring instruments and a wide range of accessories.
30th August 2019

Predictive maintenance helps food and beverage companies

Predictive maintenance helps food and beverage companies
With any unscheduled down-time being a cause of major headaches for food and drink manufacturers, John Rowley of Mitsubishi Electric highlights how predictive maintenance can provide the solution and how easy it is to implement. With food manufacturers being continually squeezed on price by retailers and asked to fulfil orders for supply that can seem, at best, challenging and at worst highly unrealistic, improving productivity is a priority. 
30th August 2019

Advanced elbow scanner added to rental fleet

Advanced elbow scanner added to rental fleet
Ashtead Technology has added the Olympus FlexoFORM pipe elbow scanner to its rental fleet of Non Destructive Testing equipment. “This is part of a major investment in our NDT fleet,” said NDT Market Manager Steve Drake. “The FlexoFORM is an extremely important addition because it complements our other pipe inspection equipment and provides a solution for many particularly challenging applications.
22nd August 2019

Economical alloy steel tension load cell

Economical alloy steel tension load cell
Flintec have added the UXT to its well-established family of tension load cells. With OIML and NTEP approval, the UXT is certified for trade weighing applications. Capacities start at 50kg through to 7,500kg, ensuring the UXT is suitable for a vast range of industrial and medical applications.
21st August 2019

Family of digitising units for general weighing applications

Family of digitising units for general weighing applications
Flintec have launched the EM100 family of digitising units for general weighing applications such as dynamic, static and high-speed weighing. The EM100 is a precision amplifier manufactured to be embedded directly into a weighing system with multiple configuration options available and plug and play compatibility.
21st August 2019

DALI decoding enhances oscilloscope software

DALI decoding enhances oscilloscope software
DALI decoding and analysis has been added to the latest version of PicoScope 6 software by Pico Technology. DALI (Digital Addressable Lighting Interface) provides two-way communications between lighting fixtures (“luminaires”), ballasts and controllers.
21st August 2019

DMM debuts an integrated thermal imager

DMM debuts an integrated thermal imager
The first digital multimeter (DMM) in its RS PRO product range to feature a built-in thermal imager has been released by RS Components. The RS-9889 thermal imaging multimeter allows engineers to identify thermal overload issues in electrical equipment from a safe distance, without the need for any physical contact.
8th August 2019


T&M and Monitoring documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

embedded world 2020
25th February 2020
Germany Exhibition Centre Nuremberg
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi
Wearable Tech Show 2020
10th March 2020
United Kingdom The Business Design Centre, London
IoT Tech Expo 2020
17th March 2020
United Kingdom Olympia London
LOPEC 2020
24th March 2020
Germany Messe München