Enerpac

Address:
PO Box 8097
6710 AB
Netherlands

Phone: +31 318 535911

Fax: +31 318 525613

Web: http://www.enerpac.com


Enerpac articles

Displaying 1 - 20 of 34

Enerpac hydraulic bolt tensioners for offshore wind

Enerpac hydraulic bolt tensioners for offshore wind
Enerpac has introduced a new portfolio of hydraulic bolt tensioners for critical Offshore Wind power generation fastening applications. The three new bolt tensioner series are designed for maximum durability in harsh environments, ease of use and improved speed of operation. The PGT-Series Double Deck and Single-Stage Bolt Tensioners provide high performance in tight spaces typically found in wind turbines.
21st March 2018

Ultra-Flat cylinders designed for big lifts in small spaces

Ultra-Flat cylinders designed for big lifts in small spaces
A new Ultra-Flat hydraulic cylinder series has been designed by Enerpac for those projects with small working space, starting at just 2.8cm, but large lifting requirements up to 1000 tonnes. The CULP-Series with lifting capacity 10–50 tonnes, and CUSP-Series 10–1000 tonnes, are designed for applications where high lifting forces are needed in confined spaces.
28th July 2017

Narrow track gauge achieves highest lifting capacity

Narrow track gauge achieves highest lifting capacity
The SL300 hydraulic gantry has been announced by Enerpac as the latest innovation in the SL series telescoping hydraulic gantries, offering the highest lifting capacity on a 61cm (24”) track gauge in heavy lifting and rigging applications. The SL300 is equipped with two stage lifting cylinders for loads up to 3000kN.
16th June 2017


Telescopic cylinders suitable for long stroke applications

Telescopic cylinders suitable for long stroke applications
A new range of telescopic cylinders, the RT-Series has been announced by Enerpac. The RT-Series cylinders are particularly suitable for applications requiring a long stroke in confined space. The multi stage hydraulic cylinders can lift loads up to 600mm in one single movement.
23rd May 2017

Incremental lifting system helps with heavy lifting challenges

Incremental lifting system helps with heavy lifting challenges
In order to synchronously lift and mechanically hold loads, Enerpac has announced the new JS-Series Jack-Up Systems. This technology gives operators a safe and efficient method to address lifting challenges. The JS Series has a capacity per lifting tower of 125-750 tonnes, with a lifting height between 6-20m and up to five percent side load capacity depending on model and lifting height.
20th February 2017

Latest hydraulic tools and heavy lifting tech at ConExpo 2017

Latest hydraulic tools and heavy lifting tech at ConExpo 2017
Exhibiting its latest developments in Heavy Lifting Technology, Enerpac will be at Las Vegas’ ConExpo 2017, from 7th-11th. The outdoor display located in the Gold Lot, booth G1127, will showcase a range of tools and heavy lifting equipment for the construction market.
5th January 2017

SPMT offers compact solution for in-plant operations

SPMT offers compact solution for in-plant operations
  A three-axel per trailer modular system featuring a minimised height, slim design and remote wireless control operation capabilities, has been introduced by Enerpac. The SPMT600 series Self-Propelled Modular Transport (SPMT) is made highly suitable for operating in confined spaces.
24th August 2016

Electric Torque Wrench with SMART technology

Electric Torque Wrench with SMART technology
Enerpac SE Asia is introducing its brand new Electric Torque Wrench throughout the region, to improve bolting efficiency and performance for industries requiring high repetition and high precision, such as mining and energy, infrastructure, oil and gas, power generation, petrochemical and processing plants.
5th July 2016

Holtec Selects Enerpac to Build Vertical Cask Transporter

Holtec Selects Enerpac to Build Vertical Cask Transporter
Enerpac has been awarded a contract from Holtec International, a global supplier of nuclear equipment and handling systems within the energy industry. Enerpac will design, fabricate and commission a 170 metric ton Vertical Cask Transporter (VCT).
1st July 2016

Hydraulic Gantry Provides Superior Performance

Hydraulic Gantry Provides Superior Performance
Building on the success of the SBL1100, Enerpac introduces the SBL900 hydraulic gantry, the company’s newest folding boom hydraulic gantry. Equipped with two stage lifting cylinders, the SBL900 lifts up to 37 feet and can handle up to 667 tons at the top of the second stage.
9th May 2016

Enerpac Extends Reach of Jack-Up System for Burkhalter

Enerpac Extends Reach of Jack-Up System for Burkhalter
Enerpac has been awarded a contract by leading engineered heavy lifting, rigging, and transport company Burkhalter to extend the height of Enerpac’s 2000 metric ton (500 metric tons per tower) jack-up system from 20m to 36m for future projects. The near doubling of in height will produce the world’s tallest jack-up system, allowing Burkhalter to handle more civil engineering and industrial multipoint lifts. 
3rd May 2016

Enerpac Wins Contract to Build a Rotor Removal System

Enerpac Wins Contract to Build a Rotor Removal System
Enerpac has been awarded a contract from S.T. Cotter Turbine Services to build a Rotor Removal System. The Rotor Removal System will provide S.T. Cotter with a tool to reduce the time and labor needed during the removal and installation of a generator’s rotor. The hydraulically actuated system will improve the efficiency and safety of turbine field maintenance.
25th February 2016

Enerpac Cordless Hydraulic Pumps Now Available With Single- or Double-Acting Valves

Enerpac Cordless Hydraulic Pumps Now Available With Single- or Double-Acting Valves
Enerpac’s industry-recognized XC-Series cordless pumps are now available in both single-acting and double-acting valve configurations. Offering the power of an electric powered pump with the convenient portability of a hand pump, XC-Series cordless pumps provide a cost-effective solution for remote locations or hard-to-access areas. This combination of features also makes the XC-Series one of the safest, most ergonomic hydraulic pumps for everyday use.
18th February 2016

Enerpac SyncHoist System Provides Safe, Accurate Hoisting and Load Positioning for Crane Applications

Enerpac SyncHoist System Provides Safe, Accurate Hoisting and Load Positioning for Crane Applications
Enerpac introduces the SHS-Series SyncHoist System, a unique below-the-hook lifting solution for positioning of heavy loads in crane applications. Using just one crane, the SyncHoist System allows operators to easily position loads vertically and horizontally, all while ensuring complete safety, speed and control. 
15th January 2016

Enerpac Multi-Functional Synchronous Lifting System Uses Digitally Controlled Hydraulics for Enhanced Operation and Safety

Enerpac Multi-Functional Synchronous Lifting System Uses Digitally Controlled Hydraulics for Enhanced Operation and Safety
Enerpac introduces a new addition to its EVO-Series Synchronous Lifting Systems, the EVO Mini (EVOM), which combines high-pressure hydraulics with a PLC (Programmable Logic Controller) system to monitor and control precise movement and positioning of heavy loads in a compact, simple-to-use package. Through an integrated Human Machine Interface (HMI), all movements are managed from a central control position that displays live operation with real-time status updates for each lifting position.
12th January 2016

Enerpac Completes Testing on World’s Largest Offshore Gantry Crane

Enerpac Completes Testing on World’s Largest Offshore Gantry Crane
Enerpac has completed testing of the world’s largest offshore gantry crane at its Hengelo manufacturing facility in the Netherlands. The crane will be used in the construction of a 5,400 meter bridge for an offshore highway on Reunion Island by French consortium Bouygues Travaux Publics, VINCI Construction Grands Projets, Dodin Campenon Bernard and Demathieu Bard Construction. The coastal highway, Route du Littoral, will connect Saint Denis with La Possession. It replaces the existing coastal road, which is exposed to falling rocks and flooding from swells and tropical storms.
23rd September 2015

Enerpac Level Lift System Provides Safe, Easy Solution for Multi-Point Lifts

Enerpac Level Lift System Provides Safe, Easy Solution for Multi-Point Lifts
Enerpac introduces its new LL-Series Level Lift System for safe and even lifting and lowering of unbalanced loads. Featuring a robust yet simple design, the Level Lift System can control up to four lift points at one time without complicated electronics or sensors at each lift point.
18th June 2015

Enerpac Provides Custom Built Cylinders for Pioneering Spirit Lifting Beams

Enerpac Provides Custom Built Cylinders for Pioneering Spirit Lifting Beams
Enerpac has supplied high-pressure, hydraulic cylinder technology for the topsides lift system beams on Allseas ‘Pioneering Spirit’ vessel. The cylinders are an integral part of the vessel’s lift system, enabling the installation and decommissioning of complete topsides weighing up to 48,000 metric tons.
18th June 2015

Enerpac Takes the Load for Lamprell Jack-Up Rig

Enerpac Takes the Load for Lamprell Jack-Up Rig
Enerpac, with its official distributor Al Masaood Trading has supplied Lamprell with an EVO-Series Synchronous Lifting System to weigh a newly completed jack-up rig. 
12th May 2015

Enerpac UltraSlim Torque Wrenches Provide Durable, Long-Lasting Solution for Narrow Access Bolting

Enerpac UltraSlim Torque Wrenches Provide Durable, Long-Lasting Solution for Narrow Access Bolting
Enerpac introduces its UltraSlim torque wrenches, designed to provide a robust, high-performance bolting solution in tight spaces that may not accommodate standard tools. Featuring a lean, stepped width design, UltraSlim torque wrenches can easily be mounted over bolts in narrow access applications. In addition to a compact size, UltraSlim wrenches provide superior accuracy with plus or minus three percent across the full stroke.
26th February 2015


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex