ATC Semitec Limited news from Engineering

Competitive Disc Thermostats

ATC Semitec’s latest franchise Asahi Keiki offers an extensive range of disc thermostats with Japanese level quality at very competitive pricing. As well as regular auto and manual-reset thermostats (from 0~200°C), there are low-profile versions, one-shot fuses, waterproof types and hermetically-sealed variants.

5th July 2012

Frost Thermostat Protection of Water Pipes

As winters in the UK become more extreme, the freezing of water and boiler condensate pipes becomes a major problem. Just when you most need it, the boiler stops working due to the boiler condensate freezing in the outlet pipe. Also water pipes (especially in insulated loft-spaces or garages) can freeze causing untold damage if the pipes spilt. These issues can be permanently solved using a suitable trace heater assembly fitted with an integral and very reliable “MQT” frost thermostat.

11th November 2011

Off-The-Shelf Thermal Cut-Outs

PEPI’s FCP series thermal cut-outs offer a neat solution to thermal and current overload problems. Despite the small size, the model FCP is capable of switching upto 8A/250VAC (12A/24VDC) thus enabling it to be used across a wide range of transformers or electric motors. It is also ideal for monitoring heat-sink or component temperatures in power electronic applications.

7th October 2010

Lighting Controls Protection

ATC Semitec now offers the widest range of protection devices for lighting circuit protection. PTC thermistors suitable for over-current, time-delay and SMD versions for cost-effective over-temperature applications. CRDs offer a constant current source for LED circuits.

9th July 2010

Multi-Purpose Temperature Sensors

ATC Semitec’s AT-11 series temperature sensor offers the best accuracy/cost/quality ratio available in the industry. Precise to ±0.3deg.K at 25deg.C and with a fast-response tip (only 6 x 5 x 15mm long), the AT-11 accurately controls the air or water temperature in your application up to 105deg.C.

10th June 2010

One-Shot Bimetal Thermal Fuses

In applications where a very reliable one-shot thermal fuse option is required, ATC Semitec now offers the PEPI H series.

13th May 2010

Long-Life Thermostats for CCTV Applications

In CCTV applications where the product location makes them difficult and costly to maintain, you want to ensure any components used are completely reliable. They must give a consistent and accurate performance over a long life-time.

29th June 2009

Motor Protection PTC Thermistors

ATC Semitec is now stocking a range of motor protection PTCs to compliment their existing range of re-settable thermal cut-outs. The new SPMP PTCs are available with trip temperatures ranging from 60oC to 190oC and comply with the DIN 44081 industry standard.

18th May 2009