Motors & Drives

Displaying 931 - 940 of 1116

New 24 Volt DC Gear Motor

New 24 Volt DC Gear Motor
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP-TM57-24V GP52-195.. Accepting any 24 Volt DC source, including battery power, this robust Gear Motor measures just 2.24” in Diameter, by 7.75” long, and has a keyed output shaft of 12mm diameter by 25mm long. Easy mounting is accomplished with 4 “face mount” M5 threaded holes, equally spaced on a 40mm Dia. B.C. The output of this reversible gearmotor is rated for 214 Lb. In. continuous torque, at 23 RPM, and 443 Lb. In. Peak. Despite its compact size, and weight of approximately 4 pounds, it’s an efficient design, requiring just 3.6 Amps at 24 Volts DC to generate its Full Load Torque. That translates into long life battery charge, very low noise operation, and lower costs for related drive electronics. Motor windings for 12, 28, 36, 48, 60 & 90 Volts are available. This unique design is rated at an “IP 54” protection level for operation in harsh environments. V
15th June 2010

Piezo controller with digital linearization PI improves the positioning accuracy for low-cost piezo systems

Piezo controller with digital linearization PI improves the positioning accuracy for low-cost piezo systems
In contrast to conventional analog piezo controllers, the E-609 single- channel piezo controller from Physik Instrumente (PI) has a digital controller which can be optimized using software and USB service interface. Additional linearization methods improve the accuracy of the piezo system in comparison to completely analog devices by a factor of 10 from around 0.2% to 0.02%.
11th June 2010

ULTRA-VERSATILE SERVO DRIVES ARE COMPATIBLE WITH MULTIPLE ETHERNET STANDARDS

Baldor is announcing even greater flexibility for one of the most versatile servomotor drive ranges in the world. The e100 drive family has been re-engineered to become compatible with no less than three industrial Ethernet standards - EtherNet/IP, Modbus TCP and Powerlink - as well as standard TCP/IP networks and Baldor's own highly popular Mint system building environment. The drives offer system builders a choice of servomotor, closed-loop vector or V/Hz motor control modes, combined with an array of features and configuration options that provide exceptional versatility of use.
11th June 2010


Coupling for pharmaceutical applications

Coupling for pharmaceutical applications
The Schmidt-Kupplung from SCHMIDT-KUPPLUNG is a compact, torsionally stiff performance shaft coupling for a large, variable radial shaft offset. The well-balanced system transmits torque without adding side loads to the drive.
11th June 2010

Unrivalled power density from new Parker compact electro-hydraulic actuator

Unrivalled power density from new Parker compact electro-hydraulic actuator
Parker Hannifin, has launched an innovative new Compact Electro-Hydraulic Actuator (EHA) that provides a complete, free standing actuation system for space critical, portable and remote applications. Offering unrivalled power, speed and durability, Parker's Compact EHA is a fully self-contained, double-acting actuator offering an exceptionally high power density at operating speeds of over 100mm/sec. This makes the new Compact EHA ideal for use as an alternative to conventional linear movement technologies such as electromechanical and pneumatic drives, in applications ranging from military and aerospace, to marine, construction and general industrial use.
11th June 2010

Industrial Ethernet allows technical support on a distance

Industrial Ethernet allows technical support on a distance
Vinterteknik is a Swedish company developing snow cannon and irrigation systems. They use Emotron variable speed drives for controlling the pumps included in their solutions, in order to offer smooth operation and reduced energy costs. In this case, the long distance and the difficult terrain between the control station and pumping station offered a challenge. The solution was remote control of the variable speed drives over the Internet.
10th June 2010

WEG’S NEW WQuattro SUPER PREMIUM EFFICIENCY MOTOR EXCEEDS THE REQUIREMENTS OF IMPENDING IE4 CLASSIFICATION

WEG’S NEW WQuattro SUPER PREMIUM EFFICIENCY MOTOR EXCEEDS THE REQUIREMENTS OF IMPENDING IE4 CLASSIFICATION
WEG’s new WQuattro line of super premium efficiency motors employs a hybrid design to achieve the highest efficiency in the market, exceeding the requirements of the impending IE4 Super Premium Efficiency classification across its entire output range.
10th June 2010

Video of the Week – TwisterBand

Video of the Week – TwisterBand
In order to guide power, data and other media safely through rotary motions in small spaces, complicated and expensive solutions are usually required. With the compact igus® TwisterBand, rotations can now be guided and managed in very confined spaces, in a cost-effective way and with very little wear.
10th June 2010

NEW SLIP RINGS OFFER RELIABLE & COST EFFECTIVE SOLUTION TO TRANSMITTING ELECTRICAL SIGNALS THROUGH ROTATING ASSEMBLIES

NEW SLIP RINGS OFFER RELIABLE & COST EFFECTIVE SOLUTION TO TRANSMITTING ELECTRICAL SIGNALS THROUGH ROTATING ASSEMBLIES
Inmoco’s new SRH 80180 and SRH 90195 series slip rings are designed for use in any system requiring the transmission of electrical and/or power signals to an intermittently or continuously rotating shaft. Typically this includes equipment such as video systems, robots and downhole inspection equipment, manufacturing and process control equipment, filling machines, medical equipment and packaging machines.
10th June 2010

Catalog Data Solutions Configurator and CAD Downloads Selected by White Drive Products

White Drive Products provides a complete range of products for mobile hydraulic drive applications. Products include a full range of low-speed high-torque motors, integrated motor brake combinations, stand alone spring-applied pressure release brakes, flow dividers, brake release hand pumps, and closed-loop hydrostatic drive piston pumps. “We want to enable our customers to easily configure a model number and download CAD models to simplify their design process,” said Fred Granson, Marketing Manager, White Drive Products Inc. “We have evaluated several suppliers and ultimately selected CDS because they offered the full package – we prefer not to collaborate with software companies that involve any third parties, CDS will build the downloadable models allowing us to direct our resources to other vital areas. We will own the IP and be able to utilize our current product modeling software without relying on a proprietary format that could affect our long term strategy. With all the offe
10th June 2010


Motors & Drives documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex