Portescap

Address:
110 Westtown Road
West Chester
PA 19382
United States of America

Phone: +1 610-235-5499

Web: www.portescap.com


Portescap articles

Displaying 1 - 17 of 17

Ultra EC brushless motor provides high torque in a compact package

Ultra EC brushless motor provides high torque in a compact package
Portescap has announced the expansion of the Ultra EC range of brushless DC slotless motors with the introduction of the new 30ECT motor. This 4 pole motor offers ultra-high torque and power (up to 245W, max continuous) without compromising on the smooth operation and long life you expect from Portescap´s brushless slotless motors.
18th May 2018

Autoclavable BLDC motor controller improves performance

Autoclavable BLDC motor controller improves performance
A new autoclavable brushless DC motor controller has been introduced by Portescap, the CNT1530, for driving large bone orthopedic handpiece motors. The controller leverages Portescap´s autoclavable design capability and surgical application expertise to provide a reliable, customisable solution to the orthopedic market.
16th March 2018

EC brushless motor delivers the right balance of speed and torque

EC brushless motor delivers the right balance of speed and torque
The new Ultra EC range of Brushless motors from Portescap has been expanded with the 22ECP35 two pole brushless DC motor. As part of the Ultra EC platform of brushless slotless mini motion solutions, these cost-optimised motors offer 30% more continuous torque and 100% more power over similar comparative motors without compromising the smooth operation and long life required from a brushless DC motor.
14th December 2017


High torque mini motor comes in a compact package

High torque mini motor comes in a compact package
The new 16DCT motor has been introduced by Portescap to its high torque DCT range of Athlonix motors. The 16DCT motor can deliver continuous torque up to 5.24mNm at a length of only 26mm. The 16DCT utilises powerful Neodymium magnets and Portescap's proven energy efficient coreless design.
16th October 2017

Compact linear motion with high linear force

Compact linear motion with high linear force
The Portescap’s new 20DBM series is now available from Mclennan, and can stack linear actuators, combines a hollow-shaft 48-step ´tin-can´ stepper motor and a precision leadscrew with an axially preloaded nut. With proven applications in medical equipment, valve control and miniature positioning stages, the 20DBM is a convincing solution for cost-effective and compact linear positioning.
18th September 2017

High torque mini motor comes in compact package

High torque mini motor comes in compact package
A new 22mm diameter motor has been added to Portescap’s DCT line of Athlonix Brush DC motors. The new 22DCT motor features proven energy efficient coreless design with an optimised self-supporting coil and magnetic circuit, the 22DCT delivers higher performance in a compact package.
3rd July 2017

DC miniature motors feature torque density

DC miniature motors feature torque density
Portescap’sAthlonix 24DCT series of high-torque coreless brushed DC motors, has support from Mclennan and features torque density, as well as up to 90% efficiency, perfectly suiting miniature power transmission applications where energy consumption needs to be minimised or where high torque output is required in small installation envelopes.
7th November 2016

Can stack linear actuator provides the performance

Can stack linear actuator provides the performance
  A range of high power density can stack linear actuators, the 20DBM, has been introduced by Portescap. These 20mm linear stepper motors offer an optimised design suitable for applications demanding high linear force.
17th October 2016

Higher torque for miniature motors

Higher torque for miniature motors
Portescap’s new Athlonix 16 mm diameter brushed DC motors combine the substantial power density and cost effective characteristics of its DCP line for demanding miniature power transmission applications where high torque, high efficiency and exacting speed regulation are critical factors. 
21st June 2016

New High Torque 24DCT Coreless Brush DC Motor

New High Torque 24DCT Coreless Brush DC Motor
Portescap introduces the new DCT range of Athlonix Brush DC motors. The 24DCT miniature motor features Portescap´s proven energy efficient coreless design with an optimized self-supporting coil and magnetic circuit which ensures higher performance is delivered, all in a compact 24mm diameter size.With torque carrying capabilities reaching up to 14.96 mNm, the 24DCT provides high performance with efficiency reaching up to 90% while maintaining a long lifetime. Due to the inherent design of the 24DCT motor, it can deliver higher torque per ampere which leads to better battery life. This makes it ideal for battery driven applications such as medical and industrial pumps, drug delivery systems, robotic systems (bionic fingers), miniature industrial power tools, tattoo machines, mesotherapy guns, dental tools, watch winders and more. Other applications such as lab automation, security and access and humanoid robots can also excel using the 24DCT Athlonix motor. 
4th May 2016

New 22ECP Miniature Motor Provides Perfect Balance

New 22ECP Miniature Motor Provides Perfect Balance
Portescap introduces the new 22ECP two-pole motors which balance speed and torque capabilities, bringing premium performance to the most commonly specified brushless motor working points. Part of Ultra EC™ platform of brushless slotless mini motion solutions, these cost-optimized motors can provide 30 percent more continuous torque and 100 percent more power over similar comparative motors without compromising on the smooth operation and long life OEMs expect from Portescap’s brushless slotless motors. 
26th April 2016

New Ultra High Torque 22ECT Brushless Slotless Motor

New Ultra High Torque 22ECT Brushless Slotless Motor
Portescap introduces the newest addition to our Ultra ECTM mini motor platform, the 22ECT brushless motor, designed specifically to deliver ultra high torque in a compact size.   With the unique coil technology and a patent pending multipolar rotor design, the 22ECT has been developed to be one of the most advanced and highest performing brushless slotless motors in its class. The 22ECT is specifically optimized for high continuous torque at low to medium speeds, maximizing power between 10 K and 20 K rpm. These motors are capable of delivering 2 times higher continuous torque than comparable BLDC motors of same size over the entire low speed range when used with gears.The 22ECT is constructed with an enhanced high efficiency magnetic circuit that significantly reduces both iron and joule losses, the primary causes for motor stator heating. The result is the new 22ECT stays cooler and offers greater power density than equivalent models within its target operating zone. With maximum continuous torque up to 98.5 mNm and higher stall torque, 22ECT motors are ideally suited for use in applications such as Industrial automation, power tools & robotics.
24th November 2015

New Athlonix high power density brushed DC motors are available from McLennan

New Athlonix high power density brushed DC motors are available from McLennan
Portescap’s newly announced Athlonix 22DCP high-power mini-motors with Alnico magnets are available from Mclennan. The 22mm brushed DC motor series, available with a choice of graphite or precious metal commutation, offers a compelling specification and cost-effective price/performance for high torque and high reliability miniature power transmission applications - from medical and industrial pumps to clinical and commercial hand-operated power tools, home and laboratory automation, and more. 
12th November 2015

Athlonix 22DCP Brush DC Motors deliver speed-to-torque performance in a cost-efficient package

Athlonix 22DCP Brush DC Motors deliver speed-to-torque performance in a cost-efficient package
Portescap introduces the next generation of Athlonix high power density brush DC motors. Athlonix DCP motors offer an optimized price-to-performance solution ideal for a broad spectrum of applications. Available in a 22mm diameter, the new 22DCP motor will feature an energy efficient coreless design with an optimized self-supporting coil and magnetic circuit, which delivers maximized power density and sustained endurance over the life of the motor.
3rd November 2015

Athlonix 22DCP Brush DC Motors deliver speed-to-torque performance for a broad spectrum of applications

Athlonix 22DCP Brush DC Motors deliver speed-to-torque performance for a broad spectrum of applications
Portescap introduces the next generation of Athlonix high power density brush DC motors. Athlonix DCP motors offer an optimized price-to-performance solution ideal for a broad spectrum of applications. Available in a 22mm diameter, the new 22DCP motor will feature an energy efficient coreless design with an optimized self-supporting coil and magnetic circuit, which ensures optimum price to performance ratio is delivered.
28th September 2015

Portescap introduces new high performance 16 mm ECH brushless slotless motor

Portescap introduces new high performance 16 mm ECH brushless slotless motor
Portescap introduces the newest addition to our Ultra EC mini motor platform - the 16 ECH brushless motor, designed specifically to provide an economic motor solution for high performance applications. The 16ECH has been developed to be one of the most advanced and highest performing brushless slotless motors in its class, specifically optimized for high continuous torque at low to medium speeds, maximizing power between 40 K and 55 K rpm, and rated speed at approximately 60 K rpm.  
7th April 2015

Portescap introduces the next model of innovation with a new high performance 16 mm ECH Brushless Slotless Motor

Portescap introduces the next model of innovation with a new  high performance 16 mm ECH Brushless Slotless Motor
Portescap introduces the newest addition to our Ultra EC mini motor platform - the 16 ECH brushless motor, designed specifically to provide an economic motor solution for high performance applications. The 16ECH has been developed to be one of the most advanced and highest performing brushless slotless motors in its class, specifically optimized for high continuous torque at low to medium speeds, maximizing power between 40 K and 55 K rpm, and rated speed at approximately 60 K rpm.
3rd October 2014


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Autonomous Mobile Robot Conference 2020
26th October 2020
United Kingdom Virtual Event
AI & Smart Automation Conference 2020
28th October 2020
United Kingdom Virtual Event
Advanced Engineering 2020
4th November 2020
United Kingdom NEC, Birmingham
MCMA Technical Conference 2020
9th November 2020
United Kingdom Virtual Event