Loss-Free condensate discharge with Hi-Line ZLD drains

Contaminants contained in the airline condensate (including oil, water, rust and other accumulated debris) can be highly detrimental to production processes, including in-line equipment as well as production batches. Condensate drains are designed to remove this damaging material from pressurised air systems at minimum expense and in the safest manner. The ZLD series zero-loss products incorporate a large cross-section diaphragm valve to flush out the condensate under the fault-free operation of the valve. At the same time, the condensate is prevented from forming an emulsion which would incur expensive condensate treatment. A volt-free alarm contact is also incorporated in the ZLD products to monitor the condensate drainage process.

Four models are available in the range, suitable for operation with airline pressures up to 16 bar, within a temperature range of 1 - 60°C. They are designed typically for operation with compressor aftercoolers, refrigeration dryers and airline filter units, covering throughput capacities from 180m3/h up to 95000m3/h.

Built-in features and advantages of the range include:

•Wear-free magnetic core which is utilised for level control and achieves optimised and loss-free discharge of condensate.
•Integrated dirt-screen between level measurement and drain valve to protect the diaphragm valve with alarm monitoring.
•Diaphragm valve with large cross section and condensate pilot control.
•Volt-free alarm contact.