WEG UK Appoints Industry Manager to Expand Growth in Key Market Sectors (17/05/2012 12:20:50)

WEG UK's growth continues apace, with the appointment of Philip Hall, a highly skilled, senior professional in business development, to its sales team. Phil has over 30- years experience in the electric motor and drives markets, working with major companies such as Siemens, Rockwell, Reliance, Teco-Westinghouse and Parker Hannifin. He was most recently employed as Business Development Manager for Brook Crompton.

Emerson Process Management Deliver Keynote Address at ISA Marketing and Sales Summit (17/05/2012 12:16:45)

Jane Lansing, Emerson Process Management's vice president of marketing, will deliver a keynote address at the ISA Marketing and Sales Summit, 15–17 August 2012, at the Driskill Hotel in Austin, Texas, USA. Lansing will share her insights during a keynote presentation on Thursday, 16 August, at 8:30 a.m.

New high-performance lubricant improves service life of roller and conveyor chains (17/05/2012 12:07:15)

iwis has developed a new lubricant for roller and conveyor chains. Sold under the Elidur brand, the high-performance lubricant was developed especially for Elite chains to replace the current initial lubrication of all standard roller chains up to 32B or ANSI160. Manufacturer's tests have shown that the optimised blend of wear additives improves the service life of Elite roller and conveyor chains by up to 250 percent.

Neopost USA and Bell and Howell Team Up on Folding and Inserting Technology Distribution (17/05/2012 12:03:45)

Neopost USA and Bell and Howell announced a new partnership. Under the terms of the agreement, Bell and Howell will distribute and provide services and support for Neopost's folding and inserting technologies.

Armacell Insulation Protects WWT Plant From Weather Extremes (17/05/2012 11:55:09)

When Inverness based mechanical and electrical engineers Commissioning Solutions Scotland were appointed to replace failed process pumps for the local waste water treatment facility, careful consideration had to be given to the insulation material used to protect the equipment and process flows from freezing.

The TMC429 is a miniaturised low cost, high performance, stepper motor controller for up to three motors (17/05/2012 11:46:06)

The TMC429 integrates all real time critical tasks in reliable, dedicated hardware incorporating an integrated motion ramp profile generator as well as an adaptable microstep sequencer with microstep RAM table. Advanced stop- and reference switch handling allows for precise and fast referencing as well as on-the-fly position checking. Automatic motor current control gives high motor dynamics while saving energy and the interrupt output can generate precise position pulses.

Meggitt Sensing Systems facility renews AS9100 certification (17/05/2012 11:40:36)

Meggitt has upgraded the Germantown facility's AS9100 Aerospace Standard for Quality Systems certification. To maintain the AS9100 certification initially obtained in 2009, Meggitt Sensing Systems underwent a thorough audit of the Germantown, Maryland facility to ensure that quality management goals are measureable and achievable.

FTDI Chip Signs Global Distribution Agreement with Arrow Electronics (17/05/2012 11:36:41)

Future Technology Devices International (FTDI Chip) has signed a global distribution agreement with Arrow Electronics, Inc. Under the agreement, Arrow will distribute FTDI's complete portfolio to customers in the Americas, EMEA and Asia Pacific regions.

Jet Edge Introduces ECO-JET Direct Drive Water Jet Pump (17/05/2012 11:32:37)

Water jet manufacturer Jet Edge, Inc. introduces the ECO-JET Waterjet Pump. Eco-friendly and budget-friendly, the 55KSI 30hp ECO-JET features an efficient direct drive pump design that consumes up to 40% less electricity than a 50hp pump, but produces the same output.

Motorized Microscope Stage is Driven by High-Accuracy Ceramic Linear Motors (17/05/2012 11:27:19)

PI's new M-687 motorized microscope XY stage system for inverted microscopes is more compact and stable than traditional computer controllable microscope stages, due to its fully integrated, miniaturized ceramic linear drives. The M-687 is delivered as a complete system including a controller, joystick and software.

Curtains up for modernized stage drives (16/05/2012 09:54:13)

The works of Beckett and Brecht, Mozart and Wagner, and of course Goethe and Shakespeare are all performed on the stage of Theater Duisburg. After decades or even centuries, these plays, concerts and operas continue to fascinate the audience. The drive technology for the stage, however, had seen better days and therefore, the theater had new electrical equipment for backstage technology installed during the 2010/2011 season.

New Elesa GN822.1 Mini Indexing Plungers (16/05/2012 09:50:12)

Mini indexing plungers are a vital part of many machines as they offer a quick, tool-free and positive positioning system in a very small package, consistent with standard engineering practices and suitable for fitment to even thin gauge sheet metal down to 3.5mm.

Dietz 103B vane operated switch makes airflow detection simple (16/05/2012 09:35:53)

When all that is needed is a simple method of airflow detection, the Dietz 103B - available from Variohm EuroSensor, offers the perfect solution.

New Sandvik Coromant CoroDrill 862 provides outstanding micro-drilling performance (16/05/2012 09:30:45)

The new Sandvik Coromant micro-geometry drills are demonstrating outstanding performance for holes up to 2.95 mm diameter. One of the differentiating factors of the CoroDrill 862 range is its, effective coating that helps retain cutting edge geometry and provide a smooth surface for chip evacuation. Furthermore, help prolong tool life in workpiece materials that include steel, stainless steel, cast iron and aluminium.

Elscint Vibratory Counting & Dispensing System for Screws (16/05/2012 09:09:56)

Elscint Automation manufactures a vibratory counting and dispensing system for small screws. A major problem faced by a lot of automobile manufacturers is that a particular number of screws need to be fixed on an engine / automobile.

Bell and Howell to Showcase Criterion APEX Sorting System at Drupa 2012 (15/05/2012 10:05:41)

Bell and Howell will showcase its Criterion APEX sorting system at drupa 2012. The Criterion APEX is one of the fastest sorters in the mailing industry, and has already a loyal European customer base. Bell and Howell will be exhibiting in Hall 4, Booth A24, May 3-16 in Dusseldorf, Germany.

Britannia Welding Endorses Murex Gas Inspection Recertification Courses (15/05/2012 10:01:21)

One of the latest organisations to attend a Gas Equipment Inspectors Recertification Course organised by Murex Welding Products is Britannia Welding Supplies. The Aldershot based company saw participation in the course as the ideal opportunity to ensure that key staff were recertified to stay at the leading edge of gas inspection procedures. This allows them to continue to conduct full safety checks on individual oxy-fuel gas welding systems.

Dark Engineers See The Light With Vero Software High speed imaging meeting draws international audience (15/05/2012 09:52:58)

The choice of two types of software has been a vital aspect in helping engineers develop a production engineering subcontractor's thriving business during the two years it has been trading in these harsh economic times. While Dark Sheet Metal Products' engineers run their entire CAD/CAM operation through the world's most powerful sheet metal CAD/CAM software Radan, the overall administration of the company is monitored through the multi-purpose management system e2i.

Right-first-time tube bending technology to be highlighted at Farnborough (15/05/2012 09:45:18)

The benefits of all-electric tube bending machines for precision aerospace manufacturing applications will be highlighted by Unison at the 2012 Farnborough International Airshow. Unison machines feature a bending system based on precision digitally controlled servomotors. This all-electric architecture provides significant performance benefits in terms of rapid and repeatable software-based set-up, and lower energy consumption and noise, compared with traditional hydraulically powered machinery.

Rotary Stages With Automated Material Handling For Precision Laser Machining Of Many Materials (15/05/2012 09:38:48)

A new series of rotary stages from Aerotech features integral pneumatic collet chucks for automated material handling. The CCS series (U.S. patent pending) supports precision laser machining and micromachining of tubular products in plastics, metals and many other materials. It is particularly suited for cylindrical tube laser machining of medical products including stents and fine tubes.

Thames Water uses Jerome analysers supplied by ABLE to meet stringent environmental standards (15/05/2012 09:31:16)

Mogden Sewage Treatment Works is one of five in the London area being upgraded by Thames Water, to ensure the stricter treatment standards to be introduced by its regulator, the Environment Agency, in 2013 are met. As Mogden is situated in a densely populated area and part of the upgrade project includes modifying the digesters, Thames Water has added new odour monitors around this area, which all use industry-leading Jerome hydrogen sulphide analysers and are linked to the SCADA network.

Advances In The Machining Of Sructural And Engine Parts (15/05/2012 09:24:56)

Staff from NCMT, the UK agent for Makino machine tools, will be present on the Japanese manufacturer's stand throughout the show to promote three distinct areas of production in the aerospace industry. One is milling of aircraft structural parts in titanium alloys using Makino's T2, T2.5 and T4 horizontal machining centres. Another is machining of aluminium aerostructures on the latest Makino 5-axis MAG platform and the new -nx series machining centres, all of which are horizontal-spindle models. Thirdly, production of larger nickel alloy engine components using the VIPER grinding process will be highlighted.

Rittal’s Hygienic Design (HD) Enclosures (15/05/2012 09:21:01)

Where there is an emphasis on stringent hygiene requirements and ease of cleaning, Rittal's Hygienic Design (HD) enclosures, with a protection category of IP69K, provide a key element in the design of open processes in the food industry and clean rooms.

UK industry to save 16.5 million kWh of energy in 2012 using Atlas Copco VSD compressors (15/05/2012 09:15:49)

Research carried out by compressed air equipment manufacturer Atlas Copco, has revealed that UK Industry will save over 16.5 million kWh of energy in 2012 as a result of using the company's energy efficient Variable Speed Drive (VSD) compressors. The amount of energy saved is the equivalent to that needed to make a massive 663 million large cups of tea, or a reduction in CO2 emissions of just under 9 million kg.

Bell and Howell Demonstrates Automated Document Factory Software at Drupa 2012: Integrated Software Suite for Mailers of All Sizes (15/05/2012 09:07:50)

At drupa 2012 Bell and Howell will introduce and demonstrate its IQ Software Suite to visitors of their booth. The suite is a tightly integrated and scalable set of best-in-class technologies for helping customers increase the impact and relevancy of every messaging item, drive costs out of their operations, maximize productivity and efficiency, satisfy postal regulations, and adhere to the strictest corporate and regulatory integrity guidelines. The IQ Software Suite will be featured in Bell and Howell's booth A24 in Hall 4, May 3 – 16 in Dusseldorf, Germany.

Bell and Howell Sets New Benchmarks for Efficiency and Throughput at Drupa 2012: Forerunner 13 with Navigator and Harmonix (14/05/2012 10:47:36)

Bell and Howell today has introduced to the international marketplace one of the most cost-effective and productive inserting systems Bell and Howell has ever built – the Forerunner 13. Bell and Howell is exhibiting at Drupa 2012, Hall 4, Booth A24, May 3 – 16 in Dusseldorf, Germany.

Long Life and High Reliability EP Steel Saves €38,400 Annually for Operator (14/05/2012 10:27:36)

NSK's Extra Long Life and High Reliability EP steel is saving the operator of a Sendzimir Mill in the steel industry €38,400 annually, by overcoming a problem of inner ring wear on mill bearings that was resulting in reduced bearing life of between 1,500 and 3,000 hours of operation

Torque of a Motor Revolution (14/05/2012 10:22:33)

Oxford YASA Motors is finding that a TorqSense non-contact speed and torque sensor from Sensor Technology is an invaluable aid in the refinement of its world-leading motor designs. Used in a test rig to evaluate prototype motors, the sensor provides accurate and dependable real time information in a readily accessible format.

TTP Labtech Launches Impressive Number of Products Following Company Growth (14/05/2012 10:19:45)

TTP Labtech, has strengthened its in-house team and commitment to product development following a successful 2011, which saw revenue increase by 5%. Having invested heavily in R&D in 2011, with 100% of resources focused solely on product development, TTP Labtech has launched an impressive number of products this year alone, with more launches planned for later in 2012.

Automotive supplier Hetal-Werke tests Arnold ATP studs (14/05/2012 10:11:41)

The automotive division of Hetal-Werke is intensively looking for alternatives to conventional joint technologies. In the future, ATP TriPress fasteners from Arnold Umformtechnik are expected to be used in place of conventional weld-on studs. These press-in studs match the requirements profile of the company, which specialises in the full scope of kinematic subassemblies and hinges in the passenger car seating area.

PRT enters a new dimension - New powerful R2000 laser scanner (14/05/2012 10:06:51)

Not all time-of-flight measurements are the same. On the basis of pulse ranging technology (PRT) developed by Pepperl+Fuchs, a new, innovative laser scanner has been produced that impressively demonstrates the advantages of this technology. To this end, further highly interesting innovations have been incorporated in the development of this device in addition to the use of PRT.

Foremost introduce Snap-in IP67 connectors offering the “perfect balance” of price and performance (14/05/2012 10:00:28)

Foremost Electronics announces the availability of two new compact and lightweight families of waterproof snap-in connectors from Binder. The 720 series of miniature connectors and the 620 sub-miniature series offer the same key features to designers.

New jobs created at Stone specialist oil firm (14/05/2012 09:54:52)

Global Heat Transfer has created five vacancies at its Cold Meece Estate headquarters in Stone. The increased demand for personnel follows a prosperous period of growth and the company plans to double in size over the next 12 months.

Precision Extrusion Dies supplied to leading R & D group (14/05/2012 09:46:59)

Aptifirst Ltd has supplied specially designed extrusion dies to a major polymer research and development organisation to allow precise measurements of the flow properties of polymeric melts to be made using a capillary extrusion rheometer. Both dies were made to very tight toelrances from tungsten carbide by electron discharge machining (EDM), and were designed to fit the customer's Kayeness capillary extrusion rheometer, although Aptifirst can also supply benchtop, floor-standing or special-purpose remote control rheometers, and accessories for them too.

Hurco Took 18 Orders Valued At £1.4 Million (11/05/2012 12:34:59)

A record number of people visited Hurco's 250 square metre stand at MACH 2012, the company's largest to date. Contacts were logged from 549 companies, an increase of 24 per cent over MACH 2010. It continues a trend of visitor growth of more than 20 per cent per show since 2002 and is in line with Hurco's growth in turnover and customer base over the past decade.

Italian Pharmaceutical Company Enjoys Fast Payback On GEM Steam Traps (11/05/2012 12:30:12)

A leading global healthcare company has revealed that it has achieved a 12-month payback on Thermal Energy International's GEM venturi orifice steam traps installed at its manufacturing facility in Italy. Thermal Energy International has installed a total of 92 steam traps throughout the facility's process plant, which has removed the problems of mechanical steam trap failure and high maintenance costs.

Altair’s HyperWorks Partner Alliance Extends Its Reach Into Composites Further With ESAComp (11/05/2012 12:26:13)

Altair today announced the addition of Finnish based company Componeering Inc. to the HyperWorks Partner Alliance (HWPA). Componeering Inc.'s software ESAComp is a composite modeling tool that aids engineers in the design and structural analysis of composites. HyperWorks customers can access ESAComp through the HWPA, a suite of third-party applications from HyperWorks partners that can be employed with the same units used to invoke HyperWorks software. The flexibility of these HyperWorks Units allow users to access the largest and most complete suite of CAE applications available at no incremental cost and with no long-term commitment.

The Sigma-5 Powerlink from Yaskawa provides a communication profile that meets timing demands for high-performance automation and motion applications (11/05/2012 10:17:30)

The Powerlink is an add-on board, compatible with Sigma-5 series command option attachable type amplifiers type SGDV which offers a wide range of functions. Powerlink is an open real-time Ethernet network supported by the Ethernet Powerlink Standardisation Group. The Powerlink network module offers a wide range of functions based on the EPSG DS 301 and the CiA 402 drive profile standards.

5 Years & 15 Million Tonnes Of Granite Later... (11/05/2012 10:07:43)

The ongoing benefits to production and reliability of a well specified and designed wear protection system are being demonstrated at Lafarge's super quarry at Mountsorrel in Quorn, Leicestershire. Five years ago, Kingfisher Industrial provided the combination of its K-BAS, cast basalt, and K-ALOX ceramic linings to the sides and discharge sections of a number of storage bins at the quarry. The installation was recently inspected as part of Kingfisher's ten-year warranty, and was found to have negligible levels of wear, despite having handled over 15-million tonnes of the hardest type of granite over the previous 5-year period.

Consistent HMI from compact to complex (11/05/2012 09:48:52)

Beijer Electronics now launches several new operator panel models in three integrated families, completing their offering of panels for every application in terms of performance and display size. From basic to complex applications, customers can now choose a consistent panel design and easily scale HMI projects between them. The new operator panels are optimized for the upgraded HMI software iX 2.0.

Functional Self-Adhesive Labels for the Food and Beverage Market (11/05/2012 09:40:54)

In food and beverage retailing, a self-adhesive label can create a multi-functional solution that will both simplify accurate workflow and product throughput and provide an invaluable additional level of product authentication. In the light of much of the media coverage of adulteration/falsification of drinks – baby milk and other beverages (including wine) and foods, – the responsible brand owner today can choose to use one simple path to success, across all his required functionalities: a self-adhesive label.

Edbro Expansion Into Middle East Market Provides Support Network for Infrastructure Development (11/05/2012 09:36:09)

Edbro is underlining its position as the leading manufacturer of hydraulic truck tipping hoists and waste management equipment in the world with major expansion into the Middle East market. Activity includes establishing key service partners in Saudi Arabia, Qatar and Oman and a combined warehouse stock and service facility in Dubai that serves the whole Gulf region.

Monoflange ball valve provides compact isolation solution for pipe-to-instrument interfacing (11/05/2012 09:30:37)

A new monoflange-style ball valve for interfacing instruments to process piping has been launched by the instrumentation products division of Parker Hannifin - the global leader in motion and control technologies. The bidirectional valve range - designated Monoball - is available in four sizes with bores of 10, 15, 20 or 25 mm and offers a full cold working pressure rating of 6,000 PSI (414 bar) with 100% bubble-tight shut-off.

Edevice Announces The HealthGO Monitor, Built On Freescale's Home Health Hub Reference Platform (11/05/2012 09:18:16)

eDevice introduces HealthGO, a complete technology platform for Remote Patient Monitoring based on Freescale Semiconductor's Home Health Hub (HHH) reference platform. HealthGO is a Remote Patient Monitoring technology platform designed for medical device and healthcare monitoring companies seeking to quickly roll out an end to end innovative, customized and reliable solution.

AGY Expands S-2 Glass Manufacturing Capacity by Twenty Percent (10/05/2012 10:21:00)

AGY announced today that it has increased production output of its S-2 Glass fiber reinforcements by twenty percent with the capability to further increase its output as market demands dictate. This expansion enables AGY to meet growth in both the aerospace and industrial markets for high-performance glass fibers used for composite reinforcement.

New Development Kit from Teseq Helps Build Personalised Pulse Networks (10/05/2012 10:16:59)

Teseq now offers a development kit that allows automotive technicians and engineers to design their own pulse networks. By using the FLX 5510 in conjunction with Teseq's NSG 5500, automotive EMC laboratories can easily design their own pulses as well as meet unique and custom specifications including pulse impedance, peak voltage, pulse width and pulse width under load.

New electric cylinders feature IP65 rating (10/05/2012 10:09:35)

Festo has launched a range of electric piston-rod cylinders featuring enhanced ingress protection, including models with a high IP65 rating, for applications involving exposure to aggressive media. The new enhanced IP versions of DNCE cylinders offer machine builders and OEMs a wide choice of configuration options, enabling the performance and level of protection to be optimally matched to the application.

Thermal Imaging Helps Improve Safety in Space (10/05/2012 10:02:25)

An applications report is available from FLIR Systems that describes how its infrared camera systems were selected and have been used by NASA Langley Research Center for its shuttle and International Space Station programs.

AUTOMATED HANDLING IN THE PHARMACEUTICALS INDUSTRY (10/05/2012 09:54:28)

To reduce handling costs at a leading UK manufacturer of pharmaceutical products, two industry-standard forklift trucks have been supplied in modified form so that they can travel between the warehouse and factory without the need for drivers. The work was carried out by E&K Automation, a company specialising in the manufacture and implementation of AGV (automated guided vehicle) systems.

Danfoss Power Electronics Earns Silver Award for Excellence in Workflow (10/05/2012 09:44:44)

Danfoss Power Electronics announced today that the company has been named the Silver Winner for the 2011 Global Awards for Excellence in Business Process Management (BPM) and Workflow. This prestigious award has been granted to industrial organizations since 1996, in recognition of their ground-breaking solutions leading to significant business benefits. The Awards Program is managed by Future Strategies Inc. and sponsored by BPM.com, Object Management Group and Workflow Management Coalition.

Giant 5-axis machining centre uses 27 per cent less power (10/05/2012 09:40:55)

An energy-efficient, 200-tonne, travelling column machining centre, called PowerForce 8, has been introduced by the German manufacturer, SHW Werkzeugmaschinen, for producing components within a large working volume defined by the user. X-axis travel is modular in one-metre increments from 10 to 50 metres, while the vertical Y-axis can be 7,100 mm or 8,100 mm and the cross Z-axis travel is 2,000 mm. Sole sales and service agent in the UK and Ireland is Geo Kingsbury Machine Tools.

LTA/LTB Submersible Level Transducers (10/05/2012 09:34:12)

Measurement Specialties, Inc. has just released its new LTA/LTB submersible level transducers for production that are specifically designed to meet the rigorous environments encountered in liquid level measurement and control.

Miniature goniometer stage completes ceramic motor driven micropositioning range (10/05/2012 09:27:16)

Complementing and completing Nanomotion's range of ceramic motor driven miniature positioning stages, the new FBG series goniometer is available in four stack sizes that combine to provide a common pivoting point for a two-axis tip/tilt angular motion set-up with a positioning resolution as low as 1 arc second. Available from Heason Technology, the low profile stages provide pivot axis radii of 71, 96, 102 and 137 mm.

Endress+Hauser and Rockwell Automation Open a New Process Training Unit in Philadelphia, PA (08/05/2012 11:29:19)

Endress+Hauser and Rockwell Automation announce the opening of a new Process Training Unit (PTU) in Philadelphia, PA. The Process Training Unit features Endress+Hauser instruments and the Rockwell Automation PlantPAx process automation system designed for the purpose of educating field technicians, engineers, and sales personnel. The PTU provides a unique learning experience through hands-on activities. Participants learn the application, installation, operation and diagnostic procedures related to many types of process instrumentation and control processes. Various communication protocols are also demonstrated including: EtherNet/IP, HART, PROFIBUS PA, and FOUNDATION Fieldbus.

Costs under control with optional internal and external modules (08/05/2012 11:21:35)

Distributed automation applications place wide-ranging demands on drive systems. Optimal solutions will, by necessity, be those that fulfil the functional and cost needs for a specific application. Available in a wide range of performance grades and with many upgrade options, SK 200E series frequency inverters from NORD DRIVESYSTEMS allow users to select customized solutions with features and costs that are tailored to their specific requirements.

Top Quality Horizontal Machining Centre Grows With The User (08/05/2012 11:02:14)

Tried and tested designs and components used by leading global machine tool manufacturers have been selected by Averex Automation, Taichung, to produce the Akari HS-450i horizontal-spindle machining centre (HMC). By choosing only the best constituents and coupling them with a lower cost manufacturing base in Taiwan, the company is able to build a very high precision machine at a competitive price.

Pipe clamp probe for surface temperature measurement (08/05/2012 10:31:57)

A new pipe clamp probe, designed as a quick and convenient method of measuring the surface pipe temperatures in industrial process control and boiler control applications is available from Variohm EuroSensor.

MicroCare to Launch Benchtop Cleaning Station at SMT Nuremburg Stand 9-304R (08/05/2012 10:23:52)

MicroCare Corporation is to launch the industry's premier ready-to-use circuit board Benchtop Cleaning Station at SMT Nuremburg, May 8-10th Stand 9-304R. Long acknowledged as the world leader in high-performance benchtop cleaning, MicroCare believes this new cleaning station will allow companies to upgrade to new levels of performance and cost-savings.

Creaform Introduces New C-Link for Faster and Easier Inspection of Complex Parts (08/05/2012 10:18:20)

Creaform is proud to introduce the latest improvement to its inspection systems: the C-Link functionality. Through C-Link, it is possible to network up to 4 C-Tracks and operate them simultaneously with a HandyPROBE portable CMM or a MetraSCAN 3D optical CMM scanner.

Mobile electron beam welding provides the solution for fabricating large structures (08/05/2012 10:09:00)

Continuous developments in out-of-vacuum-chamber EB technology are pushing away at techno-economic barriers previously preventing the uptake of single pass, thick-section, low distortion electron beam (EB) welding of large pressure vessels and structural fabrications. The ability to use EB technology outside a vacuum chamber, coupled with the introduction of new sliding seal vacuum technology means that the welding process is given greater mobility enabling an increasing number of technical applications and commercial opportunities across a range of industries.

CoaXPress Products Come To STEMMER IMAGING (08/05/2012 09:59:37)

STEMMER IMAGING has introduced a selection of cameras and framegrabbers that make use of the new CoaXPress data transmission standard. CoaXPress can send high speed video, communication, control and power over long distances using a single standard coaxial cable. With data rates of up to 6.25 Gbps per cable for video, images and data are achievable over distances up to 40m and data transmission over distances greater than 100m are possible at 3.125 Gbps.

WWEM 2012 workshop programme announced (08/05/2012 09:55:51)

The organisers of WWEM 2012, the Water Wastewater & Environmental Monitoring event, have published the titles for many of the Workshops that will take place in Telford (UK) on the 7th and 8th of November.

Advanced automotive motor drivers from Melexis bring LIN-ready single chip solution to BLDC motors & actuators (08/05/2012 09:43:08)

Melexis announces its next generation IC family for sensor-less and sensor based BLDC motor control in automotive applications. The new IC family consists of 4 base members; the MLX81205, MLX81207, MLX81210 and MLX81215. Each is available with a variety of memory configurations and in different package options.

Gasmet’s latest monitors on display at Achema (04/05/2012 10:46:49)

Leading gas analyser manufacturer Gasmet Technologies Oy (Finland), has announced its participation in the Achema 2012 exhibition (Frankfurt, 18 – 22 June). The latest gas monitoring technology will be on display at stand C49 in hall 11.1 (Instrumentation, Control and Automation Techniques) including the new Gasmet DX 4040 – a unique portable FTIR analyser that enables the measurement of almost any gas or vapour.

Twiflex Disc Brakes Meet the needs of Overland Coal Conveyors (04/05/2012 10:29:23)

When coal processing plants are an appreciable distance from the mine, how best to transport the coal from one to the other is a key consideration. It is not unusual for the processing plant to be tens of miles away, which might at first glance suggest delivery by truck. But overland conveyors can often provide a far more economical solution, providing cost reductions in the order of 20-40% or more.

Microfluidics Specialist Dolomite joins forces with LioniX B.V. (04/05/2012 10:20:49)

Microfluidics expert Dolomite is pleased to announce its collaboration with LioniX B.V. Dolomite and LioniX B.V. join forces in the areas of designing, developing and fabricating microfluidic devices and systems which enable them to expand the range of leading-edge customised solutions to their clients.

Tanks A Lot (04/05/2012 10:13:09)

To complement Axium Process' stainless steel tank and vessel fabrications, the company has extended its range of hygienic stainless steel fittings and process components to include a comprehensive range of tank ancillaries including 304/316 stainless steel tank manways, sprayballs, level gauges, clamp blank sightglasses and tank ferrules.

Dryers Provide -40ºC Dewpoint At Point-Of-Use For Maximum Economy (04/05/2012 10:05:51)

The HPD range of 'point of use dryers' from Hi-line Industries are compact and cost effective and feature a 'minimum downtime' cartridge change. They are ideally suited for remote installations, or wherever there may be only limited access available.

New Retrofit Service Takes Off In Europe (04/05/2012 10:02:21)

ESAB Cutting Systems has extended its refurbishment, retrofit and second hand cutting machine services in Europe. A new facility based at the company's Headquarters in Karben, Germany is designed to offer customers in mainland Europe, cost effective alternatives to investment in new cutting machines.

Sandvik Coromant introduces next-generation in deep hole drills – CoroDrill 861 (04/05/2012 09:57:23)

Sandvik Coromant introduces the CoroDrill 861, a brand new range of solid carbide drills for deep hole drilling applications. Featuring Advanced Chip Management (ACM) flute geometry, the new drills are able to generate small, manageable chips. This, combined with specially designed point geometry to reduce thrust forces and patented double-offset margin geometry, helps provide the high stability necessary for drilling deep holes in the most expedient and efficient manner.

First UK sale of jointly developed DMG / MORI SEIKI machine (04/05/2012 09:50:55)

At MACH 2012, Dr Masahiko Mori, president of Mori Seiki Co Ltd, welcomed Liam Eley, managing director of Premier Mould Services, as the first UK company to order a MILLTAP 700.

Libelium unveils the top 50 Internet of Things Applications (04/05/2012 09:38:37)

The exponentially growing number of objects connected to the Internet is completely changing our world. What new business models will appear? Which processes can be optimized? How many vertical markets will benefit? Libelium, a wireless sensor networks platform provider, has released the document "50 Sensor Applications for a Smarter World. Get Inspired!" covering the most disruptive sensor and Internet of Things applications.

2012 IS A RECORD YEAR FOR SCARBOROUGH-BASED MACHINE MANUFACTURER (04/05/2012 09:19:45)

2012 is set to be a groundbreaking year for the Scarborough-based builder of tube bending machines, Unison. In the first quarter alone, the company has tripled the size of its order book and the rate it is building machines compared to the same period last year.

shentongroup Appointed Exclusive UK Distributor for Allmand Bros, Inc (03/05/2012 10:34:05)

Specialist supplier of power generation and energy systems, shentongroup, has been selected as the exclusive UK distributor for USA based Allmand Bros Inc., a leading worldwide manufacturer of portable site support products and the inventor of the first Portable Light Tower. Bison, a new shentongroup division established to provide robust, quality and innovative products to the rental sector, will market the Allmand products.

Split Bearing Design & Enhanced Sealing Against Sludge Set To Radically Reduce Maintenance Costs For Treatment Plant (03/05/2012 10:27:04)

The split-to-the-shaft design and advanced sealing of Revolvo's SRB bearings has resulted in their application on aerators at Wessex Water, Water Treatment Plant. The SRB split bearings allow easy maintenance, without having to remove the shafts of long horizontal rotors that agitate sewage and introduce oxygen to the treatment process. Previously a crane was required to completely remove the solid support bearings, at a cost running to thousands of pounds per day. In addition, the sealed SRB bearings are designed to withstand full submersion in sewage sludge, which can occur due to raised levels in the aerator tanks during periods of heavy rainfall.

Weldability-SIF Foundation Charity Continues To Help Welder Training (03/05/2012 10:22:07)

UK based one stop welding products supplier, Weldability-Sif, has held the official opening of a new Foundation Level Welder training facility at Tresham College of Further and Higher Education in Corby, Northamptonshire, one of 50 colleges that will provide new welder training facilities funded by the Weldability-Sif Foundation Charity during the period 2012 to 2017.

Free Energy Management System Webinar from InduSoft (03/05/2012 10:06:27)

InduSoft announces a free webinar on how to create energy management systems on May 9, 2012. Joining the seminar will be a speaker from Noble Conservation Solutions to offer real world experience on how to best implement energy management systems (EMS). Noble is an engineering and consulting firm that provides products and services to reduce energy consumption and optimize processes in sustainable and environmentally responsible ways that deliver bottom-line savings.

Lightweight VICTREX Pipes Qualified by PFW Aerospace for Cargo Drainage System on Airbus A350 XWB (03/05/2012 09:55:51)

Aircraft manufacturers are driven by the need to design the most lightweight and fuel-efficient aircraft possible while reducing overall manufacturing costs. PFW Aerospace AG and Victrex developed and qualified a novel VICTREX PEEK polymer-based pipe system for the cargo drainage system on the Airbus A350 XWB.

Patent-pending vertical arresting system for Macron belt driven actuators (03/05/2012 09:50:41)

Macron Dynamics Inc. has introduced a patent-pending arresting system designed to promote safer use of belt driven actuators in vertical automation applications. Macron's cam lock arresting wedge system, or CLAWS, is a U.S. patent-pending arresting system that prevents cart freefall in the event of belt breakage.

Expanded Plastic Tubing & Hose Buying Guide from NewAge Industries Now Available (03/05/2012 09:47:13)

NewAge Industries announces an update to its tubing and hose buying guide. The guide now provides twenty tips on choosing plastic and rubber tubing and reinforced hose to help avoid application and purchasing errors.

New Rotary Unit - Greater Positioning Accuracy, Higher Loads (03/05/2012 09:27:31)

The new IEF Werner MDV 80/100 manual rotary unit from R. A. Rodriguez is the ideal solution for applications that require precision rotary adjustment. It features a high specification worm gearbox to keep reversing backlash to a minimum, and spindle support bearing to absorb high torque capacity.

Compact pneumatic swivel module makes light work of heavy loads (03/05/2012 09:15:46)

Today, Festo launches a guided pneumatic swivel module for manufacturing automation that provides a versatile rotating drive solution for larger and difficult loads. The new DSM-HD swivel module combines a high performance semi-rotary vane drive with a precision heavy duty bearing to rotate larger loads through adjustable angles up to 270 degrees - accurately and without any need for additional bearings or guidance systems.

UK Designed and Manufactured RF Connectors Lead the Way on Quality and Delivery (03/05/2012 08:59:15)

Intelliconnect (Europe) Ltd, offers one of the widest ranges of connectors available to designers. Standard connectors include; N,C,TNC, 7/16, SMA, SMB, MCX, Triax, 3.5mm, 2.92mm, 2.4mm, 1.85mm millimetre-wave ("mmwave") products and Triax and Quadrax types. Intelliconnect can also provide waterproof versions, to IP68 when connectors are unmated, of all of their products if required and fast turnaround custom designs.

Seaward tester tastes success at UK coffee machine producer (02/05/2012 10:17:32)

The UK's only manufacturer of cappuccino and espresso coffee machines is using the advanced multi-function ClareHAL 104 from Seaward to improve product testing at its West Midlands engineering and manufacturing site. Fracino is a brand leading manufacturer of stylish and innovative commercial coffee machines for coffee shops, boutique hotels, gastro bars and restaurants. It supplies products to markets around the world and was the first company of its type to achieve the ISO 9001 quality standard.

Back Manufacturing, But That Is Only Half The Story (02/05/2012 10:12:00)

Manufacturing is re-emerging as a leading economic growth engine after a rather quiet summer. However this sector alone is not big enough to pull the whole of the UK back into good times. So says Mark Ingham, sales manager at Sensor Technology Ltd in Banbury, one of the innovating yet commercially aware companies identified by politicians as vital for 'rebalancing the economy'. "It is clear that we need to rebuild the national base of manufacturing, engineering, science and technology companies. These create wealth, rather than just redistributing it. However, this is not an overnight project; it will take literally decades.

CGTech to showcase VERICUT Programming and Simulation at Farnborough International 2012 (02/05/2012 10:05:08)

CGTech will be exhibiting at Farnborough International 2012 on stand D100 in Hall 1 on July 9th – 13th 2012. The stand will feature the latest versions of CGTech's VERICUT software products for both Machine Tool Simulation and Automated Fibre Placement (AFP) programming and simulation. In addition CGTech will present a new product for programming and simulation of Automated Drilling and Fastening machines used for airframe assembly.

“Axium Process’ Filters are eggcellent” states Bumble Hole Foods (02/05/2012 10:01:40)

Worcestershire based Bumble Hole Foods recently contacted Axium Process, the filtration specialists, to provide a solution to its existing mesh filter media which was collapsing under pressure after the company's pasteurising operations.

Resounding Success For AWD Welding World Village At MACH 2012 (02/05/2012 09:53:07)

The AWD (Association of Welding Distribution) Welding World Village was a resounding success and brought another dimension to MACH 2012. With 27 welding and cutting equipment, consumables, safety and gas suppliers in one area, visitors found it very easy to find the products and companies they were seeking.

Nitrogen generator global supply agreement for LC/MS. (02/05/2012 09:46:23)

Parker Hannifin's Filtration & Separation Group, the leader in gas generation for LC/MS and GC applications, has entered into a worldwide supply agreement with the Waters Corporation. Under the agreement, Waters will resell Parker Balston nitrogen generators as part of their LC/MS package

New graphene-based material could revolutionise electronics industry (02/05/2012 09:40:42)

The most transparent, lightweight and flexible material ever for conducting electricity has been invented by a team from the University of Exeter. Called GraphExeter, the material could revolutionise the creation of wearable electronic devices, such as clothing containing computers, phones and MP3 players.

NSK Super-TF Steel Saves €16,300 Annually For Cold Rolling Mill (02/05/2012 09:31:49)

NSK's asset improvement programme is saving the operator of a Cold Rolling Mill €16,300 annually as a result of solving a problem of bearing failure that was occurring three/four times per year, resulting in unplanned shutdowns and serious loss of production at the mill. The mill operator was being forced to change bearings up to four times a year due to the harsh working environment in which the bearings operated. The bearings were failing prematurely due to contamination; ingress from dirt, debris and liquids that were affecting the bearing lubricant and shortening bearing life.

WAS - The Load Cells with the Hole in the Middle (02/05/2012 09:13:21)

The WAS range of load cells from LCM Systems has been designed specifically for engineers who need the force application component to pass through the centre of the load cell. Examples where they are used include bolt tension monitoring, press tool force measurement, forklift truck overload protection and failsafe cable tension monitoring.

Bellows couplings for solar manufacturing equipment (02/05/2012 09:10:03)

Bellows couplings from Ruland Manufacturing offer a high degree of accuracy and repeatability for renewable solar energy applications including test and measurement, wafer handling, panel processing, and vision systems for PV and CPV cell, panel, and thin-film production equipment.

MAPAL’s new drill triples productivity (02/05/2012 09:00:09)

Designed specifically for efficient and cost-effective machining of steel and cast iron, the new MEGA-Speed-Drill from MAPAL enables users to achieve up to three times the productivity of conventional drills without any significant increase in tool costs.

Modular Battery Charger For Flexible, Programmable Energy Efficiency (01/05/2012 17:02:20)

The new Hawker LifeSpeedIQ intelligent high-frequency modular battery charger from EnerSys is designed to support flexibility and efficiency in the deployment and utilisation of a wide range of battery types. Its innovative modular design, fully-programmable performance and lower charging factor allows battery installations to be optimised for operational and energy efficiency with lower power consumption and reduced carbon footprint for improved sustainability.

Edbro to Host its Biggest Ever Stand at Tip-Ex 2012 – 25th-27th May (01/05/2012 15:40:39)

Hydraulic tipping gear specialist, Edbro, will be displaying its industry leading products on two stands at this year's Tip-Ex. As in previous years, visitors to the show will be able to speak to Edbro's expert sales team and see demonstrations of Edbro equipment inside Hall A, stand 5-6. However, the main event will be Edbro's largest external stand to date. Spanning from stand OS8 to stand OS14, Edbro will be hosting its traditional BBQ surrounded by 14 trucks, each fitted with Edbro cylinders.

Intertronics Quick And Simple Adhesive Solution For Ford Components (01/05/2012 15:34:06)

A quick and simple solution was required to provide added security for one of Ford Components Manufacturing Ltd's laminated metal shim pack products. Known as edgepeel, the pack provides a number of shims, to specific customer requirements, that can be quickly and easily selected at the point of assembly thus speeding up production.

Online viscometers with integral temperature sensor (01/05/2012 15:31:07)

The versatile field-proven XL7 series of online process viscometers from Hydramotion now feature the option of an integral temperature sensor, facilitating the simultaneous monitoring of fluid temperature and calculation of temperature-corrected viscosity without the need for a separate thermowell.

New 5-Axis Machining Centre With Turning Capability (01/05/2012 15:10:43)

DMG has introduced the DMU 60 eVo FD with integral turning capability for efficient manufacture of complex workpieces, particularly in the aerospace, medical and motorsport industries.

48 Volt DC Planetary Gearmotor (01/05/2012 10:45:50)

Midwest Motion Products is pleased to announce the release of a new DC Gear-Motor, Model #: MMP-D33-455D-48V GP81-03.7 - Accepting any 48 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 8.4" long and has a keyed output shaft of 19mm diameter by 40mm long.

Five New Image Capture Cards Added To STEMMER IMAGING Range (30/04/2012 10:08:32)

STEMMER IMAGING has boosted its range of image capture cards with the addition of five new models from Datapath. All of these new cards are four lane PCI-X capture cards with video bandwidth of 650 MBytes/second.

Hydrogen monitoring improves Syngas efficiency (30/04/2012 09:59:50)

Syngas (synthesis gas) is manufactured from feedstocks containing carbon, such as coal, heavy oil, natural gas or biomass, to produce a mixture of hydrogen and carbon monoxide. The production process involves a number of phases that start with gasification of the feedstock, and efficiency is greatly improved when hydrogen levels are monitored using a new sensor technology that is able to measure continuously without interference from other gases.

Deeter Sensors Now ATEX & IECEx Approved (30/04/2012 09:54:08)

The Deeter Group have attained ATEX and IECEx approval on a wide range of sensor products enabling them to be used in hazardous environments. ATEX Directive 94/9/EC is the mandatory requirement for all equipment intended for use in a potentially explosive atmosphere to conform to specific safety standards.

New SM100 Sampling Pump Module Simplifies Gas Monitoring in Remote Areas (30/04/2012 09:48:08)

The new SM100 Sampling Pump Module from General Monitors draws combustible or toxic gases at 0.05 to 1 LPM from monitored areas to a gas detector, making it easier and cost effective to measure potentially hazardous gases in areas that are too remote, inaccessible, or too cold, hot, or wet for direct sensor monitoring.

Calculations of Bearing Defects made easy (30/04/2012 09:44:18)

Bearing related failures are one of the most common faults encountered in plant equipment. For years, vibration analysts and reliability professionals have been challenged with obtaining the required information to accurately determine bearing fault frequencies.

Lightweight, high-performance, washproof: New open or closed washdown versions of NORD's helical bevel gear units (30/04/2012 09:39:13)

The new two-stage helical bevel gear units from NORD DRIVESYSTEMS are designed as washdown versions that can be cleaned very easily – cleaning liquids wash off in all installation positions. Designed to withstand frequent intense and aggressive cleaning processes, they are equally suitable for use with acids and alkaline solutions. The gear unit housings, which are manufactured from die-cast aluminum, resist corrosion considerably better than steel models.

Enhanced Seal Performance For Freeze-Drying Applications (30/04/2012 09:31:41)

Freeze-drying processes can involve cycling temperatures in the range of -20°C to +130°C, together with solvents and/or water under medium/high pressures. This combination of aggressive working conditions is conducive to the development of thermal stresses in the seals utilised for the freezer operation. These thermal stresses can also result in associated mechanical stresses leading to premature sealing failures due to cracking and blistering of the seal materials. Dupont Kalrez 6230 perfluoroelastomer (FFKM) parts have been developed to meet such challenging sealing requirements, offering excellent steam cycling resistance up to 260°C.

Mini Web Based Warehouse Management System Enables Unused Space To Be Sold To 3rd Parties (30/04/2012 09:24:15)

IDC's scaleable, wireless and web based warehouse management system is enabling operators of large distribution centres to become more efficient and profitable – especially during the current downturn – by allowing them to sell space they are not currently using to third parties.

Long-Lasting APTIV Film-Based Labels Provide Hospitals With Improved Tracking And Safety Benefits (30/04/2012 09:16:51)

Hospitals and medical facilities have been seeking a solution to the issue of peeling, cracked and missing labeling of their most critical instruments. Permanent identification of medical instruments, for instance, endoscopes and forceps, is difficult due to sterilization and upstream washing processes. Conventional labels, such as those produced by laser engraving, are degrading over time, resulting in mis-indentification and the inability to track and monitor equipment.

World Machinery Takes A Laserblade To Prestwood Panels Ltd. (30/04/2012 09:07:59)

Prestwood Panels is benefiting from faster work rates, improved throughput and reduced costs, since purchasing a refurbished Laserblade laser cutting machine and state of the art Lantek programming system from industrial laser specialist, World Machinery. The flexibility of the Laserblade machine to cut complex profiles quickly and at low cost is also enabling Prestwood to expand its business into new markets, such as automotive and point of sale.

Next Generation Of Insulation Contractors Under Training (27/04/2012 09:58:34)

Elastomeric and polyethylene foam manufacturer Armacell is helping the next generation of thermal insulation contractors by providing ongoing application training support to City & Guild apprentices.

Ultraviolet (UV) Imaging Lens for Forensic Investigation (27/04/2012 09:55:35)

The Model 228 lens from Resolve Optics Ltd. provides high performance in both the UV and visible wavebands, enabling forensic scientists and crime scene investigators to identify and focus on a target in the visible and then quickly slide the UV filter across to take images in the UV without having to refocus.

New Pfaudler valves find right outlet (27/04/2012 09:49:52)

Pfaudler can now provide a range of bottom outlet valves that provide superior product control through highly accurate temperature measurement - and also meet the increasing demands for environmental protection.

New boiler probe has integrated connector (27/04/2012 09:47:31)

Variohm EuroSensor has launched a new NTC boiler temperature probe with an integrated 2.5 mm industry standard connector for fast and convenient installation in boiler systems and industrial process control applications.

Hydratight Expands Global Team (27/04/2012 09:44:37)

In its continuous efforts to improve service, joint integrity specialist Hydratight announces the appointment of a global operations and supply chain leader. Vincent Parmentier has direct responsibility for all three global regions, and work closely with the regional business leaders. His role will be to oversee and create global standards, key performance indicators, and evaluate system to deliver one global standard.

FDB - Get The Ferry Locked Up In A Hurry! (27/04/2012 09:40:50)

For the marine contractor tasked with fitting out a Bahamas based ferry there was the little problem of a glitch in the supply chain - with a need for a complete fit of special cabinet locks for the personal storage areas – and the locks had to be on board in two days.

ABSSAC May Editorial - Unique Aeration coupling (27/04/2012 09:36:28)

The Challenge was to develop a flexible shaft coupling that could be used in the drive assembly of a "Aerator" used in the oxygenation of water in fish spawning ponds and small lakes. Aeration is especially required in times of hot weather where the oxygen concentration within the water can fall and have a detrimental effect on spawning.

Teseq UK Calibration Service Covers All EMC Test Products and Antennas (27/04/2012 09:31:18)

Teseq has UKAS accreditation for on-site calibration of all EFT, PQT, Surge, pulse generators, Harmonic & Flickers analysers and offers "no down time" antenna calibration in its new purpose built chamber, avoiding delays caused by weather on open-field test sites.

IGT Industries Control and Signage Solutions for Aircraft Interiors (27/04/2012 09:25:33)

These typically custom designed solutions include Passenger Control units (PCU) for control of seat position, entertainment systems and galley control panels. Control systems may incorporate capacitive touch screens which may be specified with IGT's innovative Thin Film Backlighting Technology.

Deeter to Exhibit at Singapore International Water Week 2012 (26/04/2012 10:03:41)

The Deeter Group will be exhibiting at this year's Singapore International Water Week. The Singapore International Water Week (SIWW) is the global platform for water solutions. It brings policymakers, industry leaders, experts and practitioners together to address challenges, showcase technologies, discover opportunities and celebrate achievements in the water world.

Haydon Kerk Motion Solutions Introduces DCM4826X Stepper Motor Drive System (26/04/2012 09:59:30)

Haydon Kerk Motion Solutions announces the release of the DCM4826X stepper motor drive module. The DCM4826X is a bipolar 2 phase chopper drive package rated for a 12-48VDC input voltage and a continuous output current rating of 2.6A rms (3.68A peak) per phase. The drive can be used with rotary stepper motors or stepper motor-based linear actuators and can be configured for full step, half step, or microstep (1/4, 1/8, 1/16, 1/32, 1/64 step size).

CILS Most Solvent Resistant Durable Labels – Straight from your Desktop Printer! (26/04/2012 09:52:34)

CILS have launched the ultimate high-performance solvent resistant durable label range.

24 V DC Motor Develops 25 Oz In. Torque at 2800+ RPM (26/04/2012 09:46:54)

Midwest Motion Products, Inc. is pleased to announce the release of a new DC Motor, with integral Analog Tachometer, the Model No. MMP D22-376F-24V T-03-C. Accepting any 24 Volt DC source, this compact Motor measures just 2.24" in Diameter, by 5.4" long, including the 3.0V/Krpm analog tach. The output shaft is 0.3150" diameter by 1.18 Inches long. Easy mounting is accomplished with 4 through holes, measuring 0.19", equally spaced on a 3.15" Dia. B.C. on an aluminum flange measuring 2.56" Square.

ISaGRAF releases ISaGRAF version 6.1 with new Workbench and C5 Firmware (26/04/2012 09:42:00)

ISaGRAF has released ISaGRAF version 6.1. ISaGRAF is the industry-leading IEC 61131-3 and IEC 61499 compliant firmware and workbench for building industrial automation products. ISaGRAF 6.1 is a major release, consisting of a new workbench, and the new version 5.3 of the C5 firmware. Now based on the powerful Microsoft Visual Studio 2010, it offers improved speed, a new and improved user interface, and enhanced windows docking and package management.

Heason 's latest miniature rotary motor has all the advantages of Nanomotion's ceramic motor technology (26/04/2012 09:36:59)

Heason Technology has launched a new 15 mm diameter miniature precision rotary servo motor from Nanomotion as a direct-drive solution that features the unique operating characteristics of the ceramic motor specialists technology - providing inherent braking and the ability to eliminate servo dither when in a static position – even under power-off conditions.

NORD DRIVESYSTEMS has redefined surface protection! (26/04/2012 09:31:21)

NORD DRIVESYSTEMS new NSD tupH sealed surface conversion system provides a versatile, cost effective and weight saving alternative to stainless steel gear case units for harsh environment and high hygiene drive applications. The ultra-robust finish employs a catalytic process that permanently bonds a base layer to the aluminium substrate. With no application of paint or other material, aluminium gear case surfaces are transformed with a durable protective finish that has a 6- to 7-fold increase in surface hardness.

Cutting-edge sensor technology to be showcased (26/04/2012 09:26:48)

Scientists developing cutting-edge sensor technology for the subsea, renewable, marine and fishery industries will showcase their research at an event next month. Academics from the University of Aberdeen and Robert Gordon University working together as part of the Scottish Sensor Systems Centre (S3C)*, will host an Open Laboratory Day for Subsea Sensor Technologies on Tuesday May 22.

Hillhead 2012 - Preview Information from Brevini Power Transmission (26/04/2012 09:23:20)

Brevini Power Transmission is displaying at Hillhead 2012 on stand E22. With a wide product range and extensive UK technical support available, Brevini is able to offer tailored solutions to most applications.

NSK Shows Bearing Products That Deliver Improved Life And Reduced Maintenance At Hillhead 2012 (26/04/2012 09:11:00)

NSK is showing a full range of production- improver bearing products at Hillhead 2102, for use on all areas of quarrying and extraction equipment, including conveyors, screens, crushers, cranes and mobile gantries.

Hylec-APL Supplies Quick Weatherproof Connection for Some of the World’s Largest Aquaria (25/04/2012 10:03:14)

One of the world's leading design and manufacturers of large aquaria was recently looking for simple electrical connection systems to provide secure, waterproof protection. Traditional industrial connectors are extremely bulky which is compromising to a tank's aesthetics and time consuming to install. Fortunately Hylec-APL, a leading UK electrical component manufacturer and supply specialist, was able to offer a discreet, simple IP68 plug and socket solution which fitted their requirements perfectly.

Subminiature LVDTs for Multipoint High Reliability Measurements (25/04/2012 09:58:31)

Measurement Specialties, Inc. has recently designed and brought to production a high temperature version of their subminiature LVDT (Linear Variable Differential Transformer), the highly reliable Model XS-B. This small position sensor has a mere 3/16 inch [4.8mm] diameter with custom design capability to diameters of 1/8 inch [3.1mm].

Torque test ensures reliability of steerable drills (25/04/2012 09:53:32)

Hydrocarbon drilling accuracy has been increased tenfold by using adapted advanced aerospace guidance systems. And an equally innovative torque sensor ensures efficiency during the equipment's regular programmed maintenance.

Be lean and green with Sandvik Coromant (25/04/2012 09:46:04)

For many years Sandvik Coromant has been an advocate of environmental sustainability in the manufacturing industry. The company's Carbide Recycling Concept (CRC) was implemented way back in 1996 as an initiative to minimize waste and offset the effects of consuming natural resource materials.

ESAB Precision Hole technology Integrates The Plasma Process For Optimum Quality Holes (25/04/2012 09:38:53)

With its new Precision Hole Technology concept, ESAB Cutting Systems has extended the capabilities of its CNC plasma cutting machines through the integration of plasma cutting, software and control systems to improve hole cutting cylindricity and to deliver the highest possible cut edge quality.

New motion control and automation brochure includes challenge-to-solutions examples for test, measurement and inspection (25/04/2012 09:31:17)

Aerotech's latest brochure, Motion and Automation for Test, Measurement and Inspection, presents its capability to deliver high-throughput micropositioning solutions for manufacturing production, quality control, R&D, vacuum and cleanroom environments through a series of test related application areas that include sensor testing, surface profiling, nondestructive test, semiconductor inspection and metrology, cleanroom and high-vacuum systems, and integrated automation and data acquisition.

SERAPID Produces Triple Telescopic Mast Station (25/04/2012 09:28:36)

Serapid, Inc. has produced an innovative triple mast station for an engineering and scientific services firm engaged in providing support and services to the US Department of Defense.

XYZ Nano-Positioning Stage for 3D Laser Lithography System (25/04/2012 09:21:12)

Piezo nano-positioning systems specialist PI (Physik Instrumente) provides a 3-axis nano-positioning stage that is employed in a novel laser lithography system by Nanoscribe GmbH. The lithography system can produce complex 3-dimensional structures, fully automatic and repeatable with a precision and flexibility previously unavailable. Sub-micron structures with sizes of up to 1 mm and widths to 150 nm are feasible.

TEKA CENTRAL SUCTION AND FILTER UNIT FROM FLEXTRACTION (25/04/2012 09:10:12)

The TEKA FILTERCUBE 2N/2H and FILTERCUBE 4N/4H are a series of BGIA-certified DIN EN ISO 15012-1 stationary central suction and filter units that are available from Flextraction Ltd. They are designed for large fabrication shops requiring multi suction from a number of extraction points within the workshop and are ideal for companies welding and working with non-alloyed metal, precious metals, galvanised materials and aluminium.

E-T-A introduces a low-cost CAN-bus controlled decentralised electrical power distribution system (25/04/2012 08:54:13)

E-T-A Circuit Breakers has introduced a new, simplified, low-cost, decentralised electrical power distribution system, each module offering up to 10 outputs rated up to 8A/10A per channel. E-T-A PowerPlex Compact provides localised monitoring, control and reliable protection of safety-critical electrical circuits, at the same time offering reduced cabling costs and build time. Communication with the PowerPlex modules is via CAN-bus using SAE J1939 based protocols.

Model 4807A High Resolution Accelerometer (24/04/2012 10:06:19)

Measurement Specialties, Inc. has just released to production its ultra low noise Model 4807A Accelerometer. This DC response accelerometer features micro-g resolution and offers an industry-first, remote auto zero function. The 4807A provides an amplified, signal conditioned output in ranges from ±2g to ±200g with a dynamic range of 98dB. This sensor incorporates a gas damped silicon MEMS sensing element with integral mechanical overload stops for shock protection up to 5,000g as well as a wide bandwidth from DC to 1500Hz.

Laser Design Unveils New Automated System: SURVEYOR Auto Gage 3D (24/04/2012 10:02:37)

Laser Design Inc. announced the unveiling of its newest and most automated inspection-grade 3D scanning system, the SURVEYOR Auto Gage 3D. Laser Design President, C. Martin Schuster commented, "The SURVEYOR Auto Gage 3D Scanning System was developed to provide a totally automated, extremely easy to use 3D inspection-grade system for either shop floor or office environments with accuracy to 25 microns (0.001")."

TDK-Lambda’s Vega modular power supplies meet latest medical approvals (24/04/2012 09:57:02)

TDK Corporation announces that the TDK-Lambda Vega is now approved to IEC/EN 60601-1, ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No 60601-1-08 3rd Edition medical safety standards – this is in addition to the current approval to the 2nd Edition, ensuring full safety approval for medical equipment is maintained during the transition period from 2nd to 3rd Editions. Typical applications for the Vega range include medical, industrial control, computing, automation, security, network servers and routers, broadcast, communications, lifesciences/laboratory, instrumentation and ATE.

NVision Launches New Project Portal for Clients (24/04/2012 09:53:55)

NVision, Inc. announced that it has launched a new project portal for its clients. The new portal, which utilizes TeamPlatform, provides NVision's clients with full, speedy access to customized data exchange Web pages related to their projects.

Southco Launches A Unique Complete Rotary Latch System For Increased Security & Safety within The Off-Highway Industry (24/04/2012 09:42:44)

Southco has developed a 'complete' rotary latch system solution - from actuation to latching - to meet the growing demands of the off-highway sector for increased security of machinery and construction equipment and enhanced safety of operators. The growing importance of driver safety and comfort and the overall security of construction vehicles are the most common areas of concern for off-highway equipment operators and constant areas for improvement for equipment manufacturers. From a security perspective, the theft of off-highway and construction vehicles is rising constantly and it is estimated that it is costing the UK construction industry alone close to £1 billion each year in addition to raising insurance premiums. As a result of today's tough global economic conditions, a shrinking market places further pressure on the off-highway industry.

Powerstax Launch New 500W High Voltage “Brick” at NEW 2012 (24/04/2012 09:32:38)

Powerstax has chosen the National Electronics Week as the venue to launch its latest power converter. The F501-385 500W output full brick high voltage DC-DC converter complements the Powerstax line- up of patented power converters allowing customers to configure compact, high power density, base plate cooled AC-DC power systems suitable for rugged environments. The wide range of field proven power converters manufactured by Powerstax offers customers a low NRE, rapid time to market power system development route.

Starter Kits Make CC-Link Adoption a Simple Step (24/04/2012 09:29:00)

Engineers considering developing CC-Link Open Network enabled versions of their own products can now use starter kits developed by the CC-Link Partner Association (CLPA), designed to make the process simple.

Tsubaki Launches New Selection Guide for its Corrosion Resistant Chain and Sprocket Range (24/04/2012 09:27:30)

Tsubaki Europe has introduced a new selection guide to accompany its extended range of corrosion resistant chain and sprockets for drives and small conveyors. Tsubaki now offers four versions of its well proven chain for use in corrosive environments. The selection guide helps customers to specify the chain type that is best suited to their application.

Ashtead Technology invites you to ‘dash for a Wii’ (24/04/2012 09:16:14)

Instrumentation specialist Ashtead Technology will be giving away a Nintendo Wii every day at both Sustainabilitylive! and the Safety & Health Expo during May 2012. However, in order to win the Wii, visitors will have to return to the company's stand within 60 seconds of being texted and tweeted.

Low cost robotic joint for humanoid robots (24/04/2012 09:09:41)

Robot developers and laboratories can now enjoy a lightweight, maintenance and corrosion free range of connection joints for humanoid systems; Robolink is suitable for use in areas of general lightweight construction, handling, automation, camera applications, etc.

Psolid innovates plastics processing (23/04/2012 10:05:37)

The high optical clarity needed on products, especially for plastic injection moulding, requires using highly polished surfaces. Brush finishes are needed for plastics processing as well. It is a very time-consuming process with high costs to produce high gloss polished or brushed finished surfaces, so cost savings are absolutely essential.

EnerSys Delivers Plug-And-Play Power-On-Demand With New Hawker XFC 2V Batteries (23/04/2012 09:55:18)

The new range of Hawker XFC batteries with 2V cells from EnerSys provides materials handling equipment manufacturers and operators with greater flexibility to specify plug-and-play power sources that can be charged for as long and as often as required to support total operational autonomy. The batteries combine advanced performance and high efficiency with low overall cost of ownership and are suitable for a range of materials handling applications including counterbalance trucks, reach trucks, pallet trucks, order pickers and AGVs. Minimum gassing ensures they can be used in retail areas, public spaces and sensitive manufacturing locations. The battery is totally maintenance free and no water topping-up is necessary.

USB Multifunction Data Acquisition Modules for High-Speed Simultaneous Operation of Multiple Channels (23/04/2012 09:51:56)

Data Translation announces the release of a series of USB multifunction data acquisition modules for simultaneously measuring different signals on multiple channels. The instruments feature a dedicated 16-bit A/D converter for each analog input. Even with the highest sampling rates – between 800 kHz and 10 MHz per channel, depending on the model – the multifunction modules effectively eliminate external influences that can affect measurement accuracy and are inherent, for example, in multiplexed systems or high-ohmic sensors.

Hydratight devises clever solution for Statoil (23/04/2012 09:48:10)

Hydratight found an innovative solution to a tricky repair for Statoil, by using a MORGRIP connector to repair a 6in super duplex pipe located within the constrained space of a subsea manifold, 340m under the surface of the North Sea.

One Size Fits All….Latest IP68 Junction box from Hylec-APL (23/04/2012 09:43:57)

Hylec-APL has expanded its range of weatherproof products to include the latest 'one-size-fits-all' Paguro junction box. The small sized junction box, utilizes an innovative adaptor which allows it to accommodate a wide range of cable diameters whilst still maintaining good cable retention. The junction box comes ready packaged with a silicone sealing gel to ensure that it offers IP68 protection.

Olmec-UK Integrates Code Reading Systems At Healthcare Supplier (23/04/2012 09:38:34)

The new code reading systems were introduced to improve efficiency in production by checking labels to eliminate those with partial print, missing print or smudged print before they are applied to the product. In order to accommodate the widely differing lot code demands and requirements worldwide together with numerous background label colours, Olmec developed a system based on an Omron SC2M 2 Megapixel colour camera connected to an Omron FZ-9 vision controller which enables the use of multi threading for high speed processing.

Intelliconnect extend range of Weatherproof Triaxial Connectors (23/04/2012 09:35:24)

Intelliconnect (Europe) Ltd has extended its market leading range of high-reliability Triaxial connectors. Two new families of Triax connectors are now available; the TRB series bayonet connectors and the TRT series featuring a threaded coupling.

Extended Travel Materials Testing Machine Announced By Lloyd Instruments (23/04/2012 09:31:59)

The new LS2.5 materials testing machine completes the family of single column instruments from Lloyd Instruments which also includes the LS1 and recently launched LS5 materials testing machines. The LS2.5 features 1400 mm crosshead travel and high speed range of 0.01 - 2032 mm/min, making it ideally suited for testing plastic, rubber and other high elongation materials. From stand-alone operation via the convenient, integral control console to PC-control using Lloyd Instruments' well-respected NEXYGENPlus materials testing software, the LS2.5 is an affordable, easy to use system.

Ethernet-based smart automation for drives and systems (23/04/2012 09:28:38)

Drives manufacturer Sprint Electric introduced at the latest SPS/IPC/Drives show in Nuremberg, Germany, a new version of drive.web, an Ethernet-based distributed control system for their wide range of DC drives. The system was demonstrated at the show through an interactive iPad demo. The drive experts from Sprint Electric were controlling a DC motor 6000 miles away using an iPad and watching it live via webcam. Using drive.web, they were able to stop, start, and change the speed and direction of the DC motor and see the changes happen instantly.

Introducing igus PRT-03 slew ring bearings (23/04/2012 09:22:13)

The new PRT type 03 slewing ring bearing from igus has been specifically designed to help reduce the cost of a slewing ring without compromising performance. Even though this bearing is very economic, it can run without any lubrication or maintenance, and is also a space saving design.

Ashtead Technology’s stand will be the focal point for all environmental instrumentation (20/04/2012 10:10:00)

A visit to the Ashtead Technology stand at Sustainabilitylive! (Birmingham NEC, 22-24th May, 2012) will be a primary objective for anyone involved with environmental testing and monitoring. This is because many of the sector's latest technologies will be on display and visitors will be actively encouraged to try out new instruments for a wide range of applications including gas detection, noise, dust and vibration monitoring, water testing, thermography and remote visual inspection.

HYDRATIGHT LAUNCHES ENHANCED LOAD CALCULATION SOFTWARE (20/04/2012 10:08:13)

Hydratight responds to the increasing world pressure for higher jointing standards with an enhanced version of its market leading load calculation software, Informate, and a powerful, highly-flexible new joint management system, iDMS.

igus helps enhance the movie and gaming experience (20/04/2012 09:48:51)

On looking to replace expensive PTFE-lined metal bearings in its home theatre, gaming and cinema seats, D-BOX Technologies approached plastic bearing specialist igus. The seats use three types of intelligent movement – subtle pitch, roll and heave – to move the occupant gently forwards and backwards, from side to side, and up and down. That, combined with encoded vibrations, meant the bearings had to be robust, yet cost-effective.

Harland Simon helps protect vessels from pirates (20/04/2012 09:44:56)

Applied Satellite Engineering (ASE) came to Harland Simon over 12 months ago as they needed a solution to support their Citadel Safe-Room Iridium/UPS Communications system to protect vessels against piracy.

IM-6500 Series (20/04/2012 09:39:29)

The IM-6500 Series from Keyence is a new type of measurement device. It is a completely new concept to rival established measuring equipment such as profile projectors, measuring microscopes or automatic CNC measuring machines. The dimensional measurement concept of the IM-6500 series utilises state of the art imaging technology, thus enabling any user to perform reliable measurements in a minimum of time and with an increased accuracy. You simply place a part on a measurement stage, push the button and up to 99 dimensions are measured in a few seconds with accuracies down to 0.7 micron. No tiresome positioning, nor risks of measurement variance or deviation between individual operators. The simplicity of use results in the IM-6500 series emerging as a massive cost saving alternative to traditional time consuming measurement processes.

Debris Shields Offer Protection of High Power Laser Optics (20/04/2012 09:34:25)

Debris Shields from Optical Surfaces Ltd. are specifically designed to protect target-facing optics located in high-power laser facilities. The use of debris shields to protect typically expensive final reflective or refractive focusing high power optics is a well-established technique of extending their lifetime.

Gassonic Observer-H Ultrasonic Gas Leak Detector Features HART Communications Protocol (20/04/2012 09:30:28)

The Gassonic Observer-H Ultrasonic Gas Leak Detector from General Monitors is ideal for gas leak detection in pressurized systems. The new Gassonic Observer-H features HART communications, Modbus with single and block transfer modes, Emerson AMS Intelligent Device Manager support, and event logging. The Observer-H is ATEX, IECEx, FM and CSA hazardous area certified and SIL 3 suitable.

Eliminate noise with igus P4.32 rol-e-chain (20/04/2012 09:26:00)

P4.32 is a cable carrier system designed to self-support on long travels and can even be used without additional guide troughs. Providing a cheaper option to standard e-chains, P4.32 rol-e-chain is suitable for a wide range of applications and industries including cranes, material handling, gantry robots and warehousing.

Microfluidic expert Dolomite launches novel surface coating agent for improved droplet microfluidics (20/04/2012 09:19:09)

After the successful launch of Pico-Surf surfactants earlier this year, Dolomite has announced the release of Pico-Glide, a novel surface coating agent facilitating advances in droplet microfluidics.

24-Page Food Texture Analysis Brochure Published By Lloyd Instruments (20/04/2012 09:07:20)

A new 24-page brochure detailing Lloyd Instruments' full range of food texture analysis solutions is now available for download from the company's website. The new colour brochure covers all aspects of texture analysis, including its benefits, specific food applications and the range of available instruments, grips and test fixtures.

Thermal Imaging Helps Monitor City Wide Heating Network (19/04/2012 10:19:36)

FLIR Advanced Thermal Solutions (ATS) has announced a new applications report that describes how Linköping, Sweden, based company Termisk Systemteknik has developed an aircraft based system using a FLIR SC7600 thermal imaging camera to effectively monitor and maintain local district heating networks.

New breed of PLC from Mitsubishi Electric is small on size, large on performance (19/04/2012 10:15:59)

Meeting the needs of OEMs, the new L series PLC from Mitsubishi Electric has been designed to provide all the performance, functions and capabilities necessary for today's demanding machine automation requirements in a compact, modular, rack-free package. Bridging the gap between the FX compact PLC and the iQ platform high performance PAC, the new modular controller combines much of the power of a Q series CPU, with the ease of expansion and user-centric design inspired by the FX. This greatly increases the range of functionality traditionally associated with mid-range PLCs.

HIGH PERFORMANCE VICTREX PEEK NOW AVAILABLE AS RELEASE FILM FOR AEROSPACE COMPOSITE PART PRODUCTION (19/04/2012 10:10:24)

Victrex Polymer Solutions recently announced a strategic marketing partnership with Umeco to market release films made from its industry leading APTIV film based on high performance VICTREX PEEK. The APTIV film-based release films will be marketed by Umeco under the VAC-PAK brand name. APTIV film is ideal for higher temperature composite processing due to its inherent release properties, excellent strength and toughness, purity and high temperature performance. As a result of Umeco Process materials market leadership, knowledge and experience in composite processing, APTIV film will now be the first high performance PEEK film currently available as a release film.

Hylec-APL introduces quick mounting control stations (19/04/2012 10:06:43)

Hylec-APL has launched a new series of control stations to complement its existing range of connectors, terminal blocks and junction boxes. Manufactured and assembled by Hylec-APL company DE Controls, the new registered design control stations combine tough IP67 enclosures with hard wearing push button and selector switches. Most items in the large range can be fitted with the unique snap-on brackets for quick and easy wall, chassis and DIN rail mounting.

Molex Receives Third Party Environmental Claim Validation for Industry’s First Bioplastic Resin-Based Connector (19/04/2012 09:59:50)

Molex Incorporated announces the Stac64-e connector for automotive applications has received third party Environmental Claims Validation (ECV). The UL Environment ECV certification confirms that the Stac64-e connector contains 71 percent bio-based content in accordance with ASTM D6866-11. Constructed of resin derived from renewable plant-based castor oil, the Stac64-e harness connector provides an alternative to traditional petroleum-based connectors while offering equivalent performance and quality characteristics.

Motion29 introduces new radio remote controls for explosive atmospheres (19/04/2012 09:52:26)

Motion29 Ltd, is now stocking JAY Electronique's new XD Series - a line of radio remote controls designed for use in Zones 1, 2, 21 and 22 explosive atmospheres. Explosions in the workplace cause on average 6 deaths per year and leave 387 workers with permanent disabilities. Operating machinery remotely in hazardous industrial areas enhances safety, allowing for precise manoeuvres, increased productivity and freedom of movement.

TSYS01 Digital Temperature Sensor (19/04/2012 09:43:26)

Measurement Specialties, Inc. Model TSYS01 digital temperature sensor encapsulates a temperature sensing chip and a 24-bit ADC in a QFN16 package. This new technology provides on-board factory calibration coefficients that provide highly accurate temperature information accompanied by high measurement resolution. For improved performance specific to the application, custom calibration is available upon request. Integration with microcontrollers is achieved through an I2C or SPI interface.

REGEN DRIVE TURNS LAUNDRY GREEN (19/04/2012 09:38:50)

High performance torque measurement is helping to improve the energy efficiency of domestic washing machines, enabling consumers to make greener purchase decisions. The Eco Rating stickers that provide potential buyers with a clear assessment of white goods' environmental performance now play a major role in retail sales. Manufactures want to achieve the best classification possible, so are redesigning their machines to reduce power consumption.

1000 miles per hour – TWI plays its part in the World Land Speed Record attempt (19/04/2012 09:35:43)

Cambridge based technology engineering company TWI is working with the Bloodhound SuperSonic Car design team to provide expertise in adhesive bonding. TWI's role is to identify and test the perfect materials joining technique for the lower chassis structure of the car designed to inspire the next generation of scientist, engineers and mathematicians and set the new 1000 mph World Land Speed Record.

Parker introduces high performance value-engineered pneumatic ISO compact cylinderSeries (19/04/2012 08:58:07)

Parker Hannifin has launched a new range of value engineered pneumatic ISO compact cylinders for use in a wide variety of industrial applications. The P1P series is a complete range of ISO21287 pneumatic compact cylinders developed to meet the highest requirements in terms of quality and performance at a cost effective price. Optimised to deliver first class function and service life, the P1P series represents everything customers' have come to expect from the global leader in motion and fluid control technologies.

igus shows next-generation plastic bearings, energy chains and chainflex cables at MACH 2012 (18/04/2012 15:14:03)

igus UK will demonstrate and showcase its latest additions to its industry-leading energy chains and chainflex continuous-flex cables, as well as its maintenance-free range of plain, spherical and linear bearings at this year's MACH Exhibition – the UK's premier manufacturing technologies event.

Rags away as Landia’s pumps minimise downtime (18/04/2012 15:05:53)

Submersible chopper pumps from Landia are successfully handling a tough, heavy ragging process at a sewage treatment works (STW) that takes in wastewater from numerous sites in the North West.

Cliff Electronics Adds Conductive Control Knobs to Growing Product Range (18/04/2012 14:59:05)

CLIFF Electronics announce the introduction of a range of electrically conductive rotary and slider knobs for use with motorised faders and controls now widely featured on audio and lighting desks. These innovative conductive control knobs are, as yet, not widely available and Cliff is happy to respond to growing customer demands. Made in Cliff's UK factory these conductive slider and rotary control knobs are competitively priced and on short lead-times, available in black and chrome plated finishes with a wide range of styles and fittings for most standard shafts.

Laser Evolved Etch Process (LEEP) takes complexity in its stride (18/04/2012 14:43:25)

"10,200 complex components; incorporating 61200 sprung arms, each attached to a circular platform with a precision pierced 0.1mm diameter hole in the centre; for delivery in 48 hours." This was a challenge asked of Precision Micro, the Birmingham based precision components manufacturer.

Efficient environmental processing of waste is made possible with Revolvo’s innovative sealing solution (18/04/2012 14:39:15)

SRB split roller bearings are proving ideal for the latest water treatment process thanks to Revolvo's innovative bearing sealing solution. The bearings have been specified by a leading UK manufacturer of Rotating Biological Contactors (RBC) after other bearings were shown to fail under the harsh conditions, sometimes after a matter of months. Revolvo sealed SRBs are designed to withstand full submersion in sludge, needing only routine re-greasing to last many years.

Customized Linear Motion from Haydon Kerk Motion Solutions (18/04/2012 14:27:44)

Haydon Kerk Motion Solutions excels at the ability to customize linear motion systems for just about any application. The perfect example of Haydon Kerk's customization capabilities in meeting its customer's unique engineering requirements is a precision linear rail system developed for an application requiring very high stiffness, accuracy, and repeatability.

EUROPEAN LAUNCH OF HIGH POWER WATER JET CUTTING SYSTEM (18/04/2012 14:19:20)

Reduced running costs and easier servicing are claimed for a new, high pressure water jet cutting system to be launched in Europe by KMT at MACH 2012. Manufactured in the USA, the Streamline PRO2 received its world premiere at the IMTS show in Chicago last September. Replacing the PRO1 and identically priced, the new model has the same industry-leading specification based on a hydraulic intensifier pump rated at either 45 or 93 kW. Both variants generate 6,200 bar (90,000 psi) of water pressure at the cutting head inlet for efficient processing of virtually any material.

Ruggedised USB Isolators from B&B Electronics Stand Up to Tough Industrial Environments (18/04/2012 14:12:21)

B&B Electronics Ltd. has expanded its family of USB isolators. Designed to isolate and protect connected equipment from surges, spikes and electrostatic discharges carried on USB cable, the new one-port Ulinx UHR401 and two-port Ulinx UHR402 USB isolators also protect themselves by virtue of their rugged construction. Unlike consumer-grade USB hubs, Ulinx hubs are built to withstand industrial networking hazards like shock, drop, vibration, electromagnetic interference (EMI) and temperature extremes.

NSK increases capital stake in NSK-ABC Bearings Limited (18/04/2012 14:03:16)

NSK INCREASES CAPITAL STAKE IN NSK-ABD BEARINGS LIMITED TO FURTHER EXPAND ITS BEARING BUSINESS IN INDIA NSK. Ltd. announced that one of its subsidiaries has become a specified subsidiary.

Triflex RSP for multi-axis robot applications (18/04/2012 13:47:28)

The new RSP (Retraction System Pneumatic) adjustable retraction system from igus is for multi-axis robot applications. Adjustable retraction system for safe and consistent cable and hose guidance.

Advanex Europe Enjoy European Successes Through Leading Edge Products & Developing The World’s Smallest Spring (28/02/2012 13:56:13)

Previously it was thought that a micro spring of 30 µm wire diameter and a 90 µm inside diameter was the worlds' smallest spring. Through their ongoing research and development, Advanex have been able to produce a working spring with a wire diameter of 15 µm and an inside diameter of 45 µm. Further work is now underway to produce a micro spring with a 9 µm diameter wire and an inside diameter of 30 µm.

Chainflex beats Corkscrews (23/02/2012 15:37:20)

One of the most common problems that can occur when cables used in energy chain applications are stressed beyond their limits is corkscrewing. What is it? Why does it happen? How can you avoid?

Endress+Hauser Introduces Installed Base Audit Program (23/02/2012 15:32:09)

Endress+Hauser experts will survey a plant, document all installed instruments and analyzers, recommend maintenance and calibration procedures, and provide the plant with a complete instrumentation support package.

CILS Computer Printable High-Temperature Resistant Durable Labels (23/02/2012 15:27:27)

Perfect for all electrical and electronic applications, CILS-9900 high-performance Computer Printable Labels feature permanent high-strength adhesion during extreme temperatures up to +388°C, providing the ultimate heat-resistant product identification solution - fully conforms to environmental legislation (RoHS, REACH, WEE etc).

Teseq Holding AG Acquires MILMEGA to Expand RF Power Amplifier Capabilities (23/02/2012 15:19:39)

Combined technologies enhance development of innovative instrumentation platforms

Complete Range of HONGFA Relays Available from Transonics - 160 series of relays - 40,000 different versions available (23/02/2012 13:20:54)

Transonics plc. the London based leading supplier of electronic components and logistics solutions, can now supply their customers with a very wide range of relays from leading the Chinese manufacturer HONGFA.

MEDIMOD 120W Medical Switcher from UNIPOWER can be quickly configured to meet exact output specification (21/02/2012 09:10:47)

UNIPOWER just announced a key addition to its MEDIMOD range of medically approved power platforms. The MEDIMOD AM-120UM is a 120W switch mode power supply with single to quad output voltages that can be quickly configured to suit customers' exact requirements. With a universal AC input that meets EN61000-3-2, MEDIMOD AM-120UM power supplies are available in a comprehensive range of single to quad output configurations from 1.5 to 48VDC and deliver 120W of highly regulated output power.

knitter-switch - LED Illuminated Panel Mount Pushbutton Switch (20/02/2012 07:25:39)

One of Europe's leading switch manufacturers, knitter-switch, announces a panel mounted pushbutton switch that will interest those designing office automation equipment, measuring instruments as well as systems that require an illuminated switch easy to mount.

UNIPOWER-High Density Hot Swap Front-Ends Provide Up To 650W (14/02/2012 17:25:09)

UNIPOWER LLC announced the SGH 3000 Series of 650W, 12V Front-Ends designed to satisfy the latest networking and datacom applications that demand smaller size, lower energy consumption and a significantly reduced cost of ownership.

V-Lock: Plug-retention safeguard for power cords (02/02/2012 15:20:49)

The V-Lock system from SCHURTER prevents unintentional unplugging of power cords on equipment. A variety of power sockets, Power Entry Modules (PEMs) and numerous country-specific power cords can be supplied as part of this system, and now also in white. Also available are power cords with V-Lock that conform to the "American Hospital Grade".

HOSPITAL LAUNDRY’S ENERGY AND WATER COSTS TUMBLE AND CO2 EMISSIONS FALL AFTER FITTING GEM STEAM TRAPS (31/01/2012 12:51:16)

Dedicated to taking an active role in reducing its carbon emissions as well as saving costs, MTW Linen Services, a subsidiary of Maidstone & Tunbridge Wells NHS, has reduced its CO2 emissions by 12.5% following the installation of Thermal Energy International's GEM venturi orifice steam traps. In addition, the laundry has reduced its energy consumption by 12% and its water usage by a substantial 30%.

ROCFAST LOCK ASSEMBLY SERVICE FROM FDB PANEL FITTINGS (31/01/2012 10:38:17)

FDBs Rocfast program is a new service which is expected to save time, money and mistakes by offering quality locks assembled and delivered direct from the Panel Fittings experts at FDB - including all major market leading industry brands. The FDB Rocfast lock assembly service is designed to take the hard work out of an order process that often requires specification of individual lock components and time consuming self-assembly prior to installation. The FDB expert team rapidly identify the optimum specification of components then order, assemble and deliver to site, to workshop or to metal former/subcontractor in line with their theme of providing "Panel Fittings for every Enclosure".

IGT Industries Custom Control Panel Solutions (31/01/2012 08:55:39)

IGT Industries, one of the UK's longest established Human Machine Interface (HMI) Solutions providers, offers its customers a time and cost saving single source for complete in house control panel design and manufacture. IGT-Industries HMI products are suitable for use in Marine, Aviation, Railway, Medical, MIL, Industrial, Fire, Security, Telecom and most other electronics applications.

GMB Series Rechargeable Lithium Polymer Cells From Powersolve (25/01/2012 20:38:39)

Powersolve has announced its GMB Series of rechargeable Lithium Polymer batteries which are ideal for applications such as hand held computers or PDA devices, mobile communication equipment such as cellular phones or radios and hand held bar code readers. • 120mAH to 10,000mAH • Very low profile • Standard and custom packages

DRC Series High Voltage DC Power Supply from UNIPOWER (25/01/2012 20:31:23)

UNIPOWER LLC has announced a high voltage DC power supply designed to provide 4kW to 240kW across a very wide of range applications. Models in the general purpose DRC Series feature low ripple, fast transient response and a stable output across a wide variety of line voltages and load impedances. Tolerance of repetitive arcing for both process stability and power supply protection is also a key feature. • 4kW to 240kW with parallel operation • High power density • Ripple down to 0.1% of rated voltage • Output voltages from 500V to 450kV

shentongroup SUPPLIES GENERATOR SYSTEM TO HERRCO COSMETICS FOR PEAK LOAD MANAGEMENT (17/01/2012 14:31:50)

When Herrco Cosmetics decided to increase production time from 12 to 24-hours a day at its factory in Halesworth, Suffolk, it was faced with the problem of how to manage its peak electrical loads. Confronted with a potential bill in excess of £50,000 for an onsite substation, Herrco turned to shentongroup, a specialist supplier of power generation and energy systems, to provide it with a bespoke generator to automatically manage its electrical peak loading

Motion29 introduces new HUMMEL Exios Cable Glands for Hazardous Areas (17/01/2012 14:21:12)

Industrial connectivity experts, Motion29, have collaborated with superior German manufacturer, HUMMEL, to introduce their new 'Exios' range of cable glands especially suited for hazardous areas including environments involving explosive gases, large amounts of dust and extreme temperatures.

NEW FRENCH DISTRIBUTOR FOR FLEXTRACTION FUME AND DUST EXTRACTION PRODUCTS (17/01/2012 14:17:53)

Flextraction Ltd, suppliers and manufacturers of Local Exhaust Ventilation (LEV) products has appointed Wattohm Equipement based in Charnay les Macon as their distributor of HPD fume and dust extraction products within France.

LNB supply and control voltage regulator ICs - single and dual devices for satellite receiver applications - (17/01/2012 14:13:20)

The A8295, A8297 and A8298 from Allegro MicroSystems Europe are the latest generation of devices in a family of single and dual low-noise block (LNB) supply and control voltage regulator ICs designed for use in satellite receivers in set-top boxes and LCD television sets.

STEMMER IMAGING extends CVC GigE camera range (17/01/2012 13:58:14)

Following on from the highly successful launch of its CVC GigE camera range STEMMER IMAGING has now released new HD models for a wide variety of applications and markets. The CVC cameras combine advanced consumer camcorder technology with an industry standard interface in a compact, feature rich package.

NEW RANGE OF FLEXTRACTION VEHICLE EXHAUST EXTRACTION SYSTEMS LAUNCHED (16/01/2012 16:49:08)

Flextraction Ltd, suppliers and manufacturers of Local Exhaust Ventilation (LEV) products is launching a new range of Flextraction vehicle exhaust extraction systems designed providing environmental protection to operatives in garage repair and vehicle body shops working on motorbikes, cars and commercial vehicles.

Tiny Tactile Pushbutton Switch From knitter-switch Features Horizontal Stem (07/01/2012 18:25:15)

Knitter-switch announced a very small, tactile, pushbutton switch that now completes its popular TS/TSS 4500 series. Unlike other models in the 4500 series, the TS 4533 – RA pushbutton switch has a horizontal stem making it ideal for a variety of applications that demand a very small and very robust momentary action pushbutton.

knitter-switch open new Sales, Quality and Logistics Facility in Hong Kong (29/12/2011 11:45:40)

knitter-switch, one of Europe's leading switch manufacturers, has moved its Hong Kong office to a larger facility which, in addition to offering increased sales services, also provides extended quality management services for all products manufactured in Asia.

New low cost linear actuator range is adaptable and flexible (21/12/2011 11:39:16)

Heason Technology's new H series linear actuators are aimed at OEM positioning applications in automated manufacturing and test equipment where competitive cost vs. performance and maximum flexibility is required.

Jet Edge Adding Waterjet Training Workshops at Shanghai, China Office in 2012 (21/12/2011 11:35:20)

Waterjet systems manufacturer Jet Edge, Inc., is now offering waterjet training and demonstration workshops at its local Shanghai office and showroom. Workshops are scheduled from 9 a.m.-5 p.m. Feb. 22-24 and 9 a.m.-5 p.m. June 18-20.

Haydon Kerk Motion Solutions and Pittman Motors Join Forces (21/12/2011 11:30:20)

- Haydon Kerk Motion Solutions and Pittman Motors, both units of AMETEK Precision Motion Control, have come together to provide product engineers access to the broadest range of linear and rotary motion solutions available from a single source.

Eaton Launches Free Catalogue App for Smartphones and Tablets (21/12/2011 11:25:43)

Eaton has launched a new App for Apple smartphone and tablet users to provide easy and fast, on-the-move access to its catalogues

ENGINEERS TORQUE TECHNOLOGY TO MEDICS (21/12/2011 11:20:22)

Medical experts and sports scientists are becoming increasingly reliant on engineers as their disciplines become more and more technical. Mark Ingham looks at some of the projects his company, Sensor Technology, has helped behind the scenes.

REVOLVO CLAIMS MARKET LEADERSHIP IN SOUTH AFRICA FOR SPLIT ROLLER BEARINGS, THROUGH PARTNERSHIP WITH OE BEARINGS (21/12/2011 11:17:20)

Revolvo, the UK largest bearing manufacturer, has established itself as the market leader for split bearings in South Africa, as a result of the activities of its long standing sole distributor, OE Bearings, and from the fact that Revolvo is the only manufacturer of non ISO- sized SN SD split plummer block bearings to the South African market

ELMO DC Whistle is one of smallest & most powerful digital servos drives available (21/12/2011 11:14:23)

ULTRA COMPACT ELMO DC WHISTLE IS ONE OF SMALLEST & MOST POWERFUL OEM PANEL-MOUNTED DIGITAL SERVO DRIVES AVAILABLE

New TESEQ USB Controlled Power Meter Operates Over 9 kHz to 3 GHz (21/12/2011 11:12:16)

Teseq, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, has introduced the new model PMU 6003 to its power meter product range.

Powerful CAE software solution is driving productivity gains (21/12/2011 11:04:38)

Computer-aided engineering (CAE) software is the designer´s best friend, a tool proven to enhance the user´s productivity

NEW ABRASIVE DEBURRING TOOLS FOR MORE AGGRESSIVE MACHINING (21/12/2011 11:00:19)

A new range of high-precision, abrasive deburring brushes made from heavy duty aluminium oxide (alumina) fibres has been introduced for use on static platforms such as machining centres, mills, drilling machines and special-purpose machine tools, but are equally suitable for mounting on industrial robots. Versions are also available for hand-held power tools.

NEW RANGE OF TIMING BELT RING SLIDES, PULLEYS AND BELTS (21/12/2011 10:57:10)

HepcoMotion® has the ability to build ring tracks and continuous motion circuits of limitless size and variation.

Creaform: 3D Optical Measurement Technologies Specialist Achieved ISO 9001 : 2008 Certification (21/12/2011 10:55:05)

Creaform, leader in 3D portable optical measurement technologies and 3D engineering services, is proud to report that following a successful audit by Intertek, its Canada-based head office – that houses the departments of R&D, Production, Technical Support, etc. – has reached the ISO 9001 : 2008 certification as of November 2011.

Top Boxes for Scotland's Premier Water Project (21/12/2011 10:52:17)

Engineers working on a flagship project for Scottish Water have installed over 400 top of the range electrical enclosures and junction boxes from Hensel.

LineRunner 300: 3D measurement with the laser light sensor from Pepperl+Fuchs (21/12/2011 10:47:37)

Whether path correction, edge or gap measurement, volume measurement or tolerance verification, the tasks and requirements of modern vision solutions are varied. Pepperl+Fuchs has developed a powerful and reliable laser light sensor in the form of the LineRunner 300 (LR300) to overcome these challenges.

Maintec chosen for the launch of new products (21/12/2011 10:43:37)

Given that predictive maintenance and condition monitoring are core applications for FLIR Systems thermal imaging cameras, the company will be making another big splash at Maintec.

Extending the Temperature Measurement Range of IR Cameras (21/12/2011 10:30:04)

A technical article* from FLIR Advanced Thermal Solutions discusses the technique of 'superframing' and how it can be used to extend the temperature measurement range of IR cameras

Edbro CX15 proves its “fit & forget” reputation is well earned (21/12/2011 10:22:31)

Fitted & Quite Literally Forgotten; Edbro CX15 proves its "fit & forget" reputation is well earned

Industry must do more to boost engineering education (21/12/2011 10:19:45)

Industry should be taking the initiative to educate pupils, teachers and parents on the benefits and careers available in the engineering and manufacturing sector, EAL has said.

Short Spelsberg lead time helps EOS Energy deliver on 7 week deadline (21/12/2011 10:16:57)

Spelsberg has just supplied 180 outdoor electrical enclosures in four days to help EOS Energy build a 1.15MW solar farm in less than 7 weeks; the fastest British installation of its size.

Winemaker blends timeless tradition with high tech comms (21/12/2011 10:13:42)

A Ukrainian winemaker is using CC-Link to help automate and expand the production of its world class wines and spirits. With domestic consumption booming, and export markets opening up, the Shabo vineyard in the Odessa region is combining high technology with the delicate art of fine wine production.

VICTREX® PEEK™ POLYMER REPLACES METAL COMPONENTSTO PROVIDE A LIGHTWEIGHT, LONGER-LASTING HARVESTING TOOL FOR PRODUCE (21/12/2011 10:09:24)

When Saroplast, a specialist in product design and molding based in Treviso, Italy, was tasked with designing higher performing components for an olive and fruit harvesting tool, it chose VICTREX® PEEK™ polymer in order to obtain superior wear and temperature resistance versus metal parts that had previously been failing.

Bauer targets global growth with German engineering quality and Altra’s worldwide support and distribution network (21/12/2011 10:06:24)

Following the company's integration as a new and strategic part of the worldwide Altra Group of companies Bauer is going for global growth with its market- leading range of highly efficient geared motors. Supported by leading edge manufacturing facilities, in Germany and Slovakia, Bauer is set to leverage the synergies of existing Altra brands in the international power transmission market, and the facilities of Altra's vast worldwide engineering support and distribution network in over 70 countries globally.

Allfabs Invests for Expansion with Purchase of Mitsubishi Laser (21/12/2011 10:02:28)

Having only launched Mitsubishi's high power laser processing machines to the UK market in early summer, Mitsubishi's UK agent, World Machinery, is already celebrating a sale of one of the near- £400,000 machines, to Allfabs Ltd, a specialist in architectural fabrications, based in Stourbridge in the West Midlands.

UKIVA And EMVA Recognise Don Braggins’ Contribution To The Vision Industry (21/12/2011 09:58:30)

The UKIVA (UK Industrial Vision Association) and EMVA (European Machine Vision Association) have jointly recognised the contribution made to the vision industry by the late Don Braggins. They chose the occasion of the recent VISION Show in Stuttgart to present Don's widow, Anne, with a gift for her garden. The timing was particularly appropriate as Don had attended every VISION show up to and including 2009 and had been a regular member of the jury for the VISION Award.

New Brad HarshIO Ethernet I/O Modules from Molex Integrate QuickConnect and Fast Start-up Technology (21/12/2011 09:55:16)

Molex Incorporated introduces the new Brad® HarshIO Ethernet I/O Modules with QuickConnect and Fast Start-up technology to provide a reliable solution for connecting industrial controllers to I/O devices in harsh environments where liquids or vibrations may be present.

KFU8-VCR-1: Multifunctional transmitter power supply with converter functions (21/12/2011 09:49:48)

Many process automation applications require versatile devices. The new signal conditioner KFU8-VCR-1 from Pepperl+Fuchs combines a universal power supply for 2- and 3-wire transmitters with signal converter functionality. Multiple outputs offer active and passive current sources and one voltage output, allowing a flexible adaptation of the field signal to the control system.

EQUIBLOC AIR (21/12/2011 09:45:24)

The EQUIBLOC AIR range of pneumatic load balancers for loads of from 70 to 350 kg offers an even wider range of load hoisting and handling solutions for industry.

BALDOR EXPANDS ITS ADVANCED RANGE OF PERMANENT MAGNET AC MOTORS (21/12/2011 09:39:59)

Baldor has expanded its RPM AC range of super-high-efficiency, permanent magnet based motors, to power output levels of 900 kW (1200 HP).

Motion 29’s new launch signals tower of strength for harsh work environments (21/12/2011 09:36:32)

Suppliers of industrial controls solutions, Motion 29, announce their newest product offering: the Patlite explosion-safe signal tower

IP66-rated LED AC-DC power supplies from TDK-Lambda – AL range 60W, 80W and 100W modules target higher power LED lighting applications (21/12/2011 09:32:48)

TDK-Lambda UK, a group company of the TDK Corporation, has added three new power levels to its AL range of LED AC-DC power supplies, which is targeted towards next generation LED lighting and signage applications requiring high power and high reliability

NEW FIXED SHADE AUTO DARKENING WELDING HELMETS FROM WELDABILITY-SIF (21/12/2011 09:26:38)

Weldability-SIF, UK based "one stop source" for all welding products has launched SIFecoLITE, a brand new auto darkening welding helmet under its Sifbronze brand, which is available for a short period at a special 'Winter Introductory' offer price of £34.75 each

New radio standard with longer-range wireless connection (21/12/2011 09:21:45)

The steute business field »Wireless« is continuing to expand the number of possible industrial applications for its innovative »energy harvesting« radio technology.

ALL AMERICAN SEMICONDUCTOR® OFFERS S-FORCE FAN (21/12/2011 09:19:21)

All American Semiconductor®, a leading distributor of electronic components, is distributing the S-Force series of compact fans from ebm-papst Inc., the world's leading manufacturer of fans and motors

Daily Telegraph Lists Powerstax as one of Britain's Brightest Businesses (21/12/2011 09:13:02)

Powerstax, one of Europe's leading value-added power solutions manufacturers, features in the Daily Telegraph's just published list of 1000 of Britain's Brightest Businesses. According to the newspaper "The list is a celebration of the 1,000 mid-sized companies which have weathered the economic storm and are set to be the foundation of the UK's recovery".

AVT boosts machinery certification capability with new appointment (21/12/2011 09:10:31)

Engineering consultancy, AVT Technology, (AVT), has strengthened its machinery certification capability with the appointment of a new Compliance Engineer.

New Programmable Digital Output, Immersion Style Temperature Probe (21/12/2011 08:59:05)

Precise digital temperature measurement from -40°F to +302°F (-40°C to +150°C) in the most extreme environments, the new 225-10-010 Series incorporates our proprietary technology with innovative temperature sensing to provide you with a fully programmable device capable of multi-node network integration and multi-mode temperature monitoring (°F & °C) in direct fluid and/or gas media streams.

Erosion reduced with Pfaudler’s new Abrasion-Resistant Glass (21/12/2011 08:56:06)

After extensive laboratory tests and field experiments, Pfaudler has unveiled a new Abrasion Resistant Glass (ARG) that for reactors, agitators and outlet valves, can provide a massive 20% reduction in erosion when compared to conventional chemical glass qualities.

Senor Ruggedised Industrial Touch Screen Computers Now Available from Seiki Systems (21/12/2011 08:53:01)

Seiki Systems Ltd has extended its industrial hardware solution offering with the addition of the Senor touch screen computer.

An international design award for Kemppi’s new welding product family (21/12/2011 08:45:25)

Kemppi has won the esteemed international iF Product Design Award 2012 in the industrial product design category with its new Kempact RA product family –a product representing a completely new kind of idiom of form and practical usability.

UK’S FASTENER AND ADHESIVES SHOW HEADS NORTH FOR FIRST TIME (21/12/2011 08:42:42)

Never mind the Spa – for the North of the UK the most refreshing thing about Harrogate next year will be the FAST & IASE Exhibitions!

Reference flats for measuring surface accuracy or transmitted wavefront (21/12/2011 08:39:42)

Working with high-stability materials such as glass, Zerodur and silica, Optical Surfaces Ltd. is today recognised as a premier supplier of high precision reference flats by many leading research establishments and national standards laboratories.

USB 3.0 offers new perspectives in machine vision (21/12/2011 08:37:19)

IDS presents first multi-camera system with eight USB 3.0 industrial cameras

Molex Ruggedised SC/APC Connector and Cable Assemblies Optimise Signal Transmission in Harsh Environments (21/12/2011 08:34:00)

Ultra-bend, insensitive fibre standard contact (SC) / angled physical contact (APC) indoor- and outdoor-rated cable solutions are six times more flexible than conventional optical cable

High Performance Materials Testing At PlastIndia 2012 (21/12/2011 08:29:26)

ROLLER CHAIN UNDERGOES A DARWINIAN EVOLUTION (21/12/2011 08:25:38)

Robert Young of Tsubaki UK describes how adaptation over time has resulted in increasing specialisation for roller chain.

IDC wireless solution ideal for tracking of Beer and Spirits dispensing (21/12/2011 08:21:52)

IDC's ZigBee WIRELESS- ENABLED CHIP PROVIDES IDEAL SOLUTION TO TRACK DISPENSING OF BEER & SPIRITS IN HOSPITALITY INDUSTRY.

ELESA LEVER HANDLES SIMPLE LEVERAGE FOR EVERYDAY CLAMPING (21/12/2011 08:19:13)

eSilicon Recognizes Magma with 2011 Supplier of The Year Award (21/12/2011 08:15:32)

Magma® Design Automation Inc., a provider of chip design software, announced today that it has received the eSilicon Corporation 2011 Supplier of the Year Award. Magma, an eSilicon technology and business partner since 2003, beat out a crowded field this past year by providing technology leadership, product quality, lowest total cost of ownership and excellent customer service.

VERLINDE hoist for helicopter dummy (21/12/2011 08:11:30)

Danish Crane Building A/S, DCB, has supplied a crane equipped with a VERLINDE EUROBLOC VT3 hoist for a helicopter dummy, which the Martec training centre has currently installed in the indoor swimming pool in Sæby, Denmark

AGD ‘stops traffic’ with Bulgin Component’s industry leading connectors (21/12/2011 08:07:25)

Bulgin Components' Buccaneer connectors feature in almost 70% of AGD's traffic detection and control products

TDK-Lambda introduces next generation digitally controlled medical power supplies – the CFE400M range (21/12/2011 08:04:32)

400W, 94% efficient and Type BF medical rated with 5 year warranty

Crocus Partners With Starchip To Develop System-On-Chip Solutions Based on Magnetic-Logic-Unit™ (MLU) Technology (21/12/2011 08:02:13)

Crocus and Starchip will work together to embed MLU memory and logic functionality into next generation secure processor-based architectures

StressCheck, the Newest HyperWorks Partner Alliance Application, Expands Altair’s FEA Capabilities (21/12/2011 07:59:49)

HyperWorks customers can access StressCheck by ESRD through the flexible and cost-effective HyperWorks licensing model

Meggitt Sensing Systems releases Wilcoxon Research triaxial vibration accelerometer with removable cable (21/12/2011 07:52:47)

Meggitt, a leading supplier of quality vibration sensors and hardware, introduces a new triaxial vibration sensor with removable cable. The 993B-7-M12 boasts improved in-band signal fidelity and a 50% increase in dynamic range.

Free video opens gateway to success in China (16/12/2011 13:33:31)

The CC-Link Partner Association (CLPA) has just released a new "Gateway to China" (G2C) programme video; based on the recent webinar of the same subject, it should be of great interest to any company selling into China or planning to approach the market.

Bearings in large sizes up to 1.5m now available on short lead times (16/12/2011 13:29:51)

UK bearing manufacturer Revolvo Ltd is bucking the current trend of limited availability in large bearing sizes and offering both standard and bespoke bearings on very competitive lead times. The new service offering is already helping to extend the operational life of older plant & equipment and reduce downtime with shorter maintenance periods for other items of strategic, production critical machines.

Hygienic Processing and Production (16/12/2011 13:20:55)

Food safety is an ongoing concern and Rittal has invested significant engineering resources to ensure their enclosures will meet the stringent hygiene requirements in all sectors of the food and processing industry.

GEM PROVIDES FAST PAYBACK FOR ITALCABLES (16/12/2011 13:10:02)

Metered tests carried out on Thermal Energy International's GEM steam traps by Italcables, Italy's largest producer of wire strands for pre-stressed concrete and post-tensioned structures, have shown steam savings of up to 30% compared to mechanical traps

shentongroup LAUNCHES NEW CELTAIRE AIR-CONDITIONING CONTRACT (16/12/2011 13:07:26)

Dedicated to continually improving its customer support, power solutions and air conditioning company, shentongroup, has introduced a new nationwide service contract for its air- conditioning customers. Coolcare24 is an all-inclusive service package supported & delivered through shentongroup's Celtaire air-conditioning brand.

Industry Forum gives boost to a ‘smarter’ electric vehicle future (16/12/2011 13:05:35)

With some estimates suggesting 60% of all miles driven in the UK will need to be electric to meet 2050 environment targets, it is critical that the advances we make today facilitate the growing electric vehicle (EV) market in the future.

Low-cost robotics made simple with igus robolink (16/12/2011 13:01:50)

Complete joint module system now ready for action

Molex Brad Automation Solutions at SPS/IPC/DRIVES 2011 (16/12/2011 12:57:56)

Upgrades reinforce company's commitment to its customers with products that deliver convenience, flexibility and cost savings

NEW LIGHT WEIGHT MICRO MANIPULATOR SYSTEM (16/12/2011 12:54:24)

Steinmeyer, Inc. announced a new high precision, light weight, micro manipulator stage MT 105-50-LM. This stage is an excellent choice for applications in the semiconductor metrology, biomedical, miniature robotics and laser industry.

X-Rite launches NetProfiler 3.0 software to maintain accuracy and consistency of spectrophotometers across workflows, from design through product realization (16/12/2011 12:50:09)

Company introduces next generation of popular software for customers using handheld spectrophotometers in industrial and graphic arts markets

MIXING EPOXY WITHOUT INCLUDING AIR IMPROVES PERFORMANCE (16/12/2011 12:43:26)

It has been found that traditional hand mixing of 2-part epoxies – especially in cases of extreme viscosity difference – can result in the inclusion of substantial quantities of air bubbles, as well as much mess and waste.

GLOBAL ELECTRONIC ACCESS AND ENVIRONMENTAL MONITORING FOR COLOCATION DATA CENTRES (16/12/2011 12:35:57)

Our data focussed age has highlighted even quite recently the need for security on an ever broadening scale and colocation data centres are at the very heart of this need

David Parry joins Cadac Organice from McLaren Software (16/12/2011 12:33:28)

Former CTO and co-founder of McLaren Software sees Cadac Organice in the best position to be the major player in Engineering Document Management and Collaboration

5-AXIS MACHINING OF SPACE OBSERVATION INSTRUMENTS (13/12/2011 17:10:26)

Parts for instrumentation used in space observation, both terrestrial and satellite-based, are machined to tight tolerances on two Hurco vertical machining centres (VMCs) at Rutherford Appleton Laboratory (RAL), near Didcot.

MULTIPHYSICS SIMULATION TOOL ACCELERATES ELECTROMAGNETIC DESIGN PROJECTS (13/12/2011 17:08:49)

A powerful new version of the Opera electromagnetics simulator for design engineers has been released by Cobham Technical Services. The latest software adds three-dimensional mechanical stress analysis, extending the tool's multiphysics capability to provide a single-step solution to complex design problems. By capturing mechanical deformation in conjunction with electromagnetic and thermal modelling, the integrated software can greatly reduce design complexity and timescales.

Automotive 3-phase sensorless brushless DC motor controller IC (13/12/2011 17:04:15)

The A4960 from Allegro MicroSystems Europe is a new 3-phase sensorless brushless DC motor controller IC that incorporates extensive diagnostic and protection features. Designed for use with external N-channel power MOSFETs, the new device is ideally suited to the control of pumps, blowers and cooling fans in automotive applications.

Eaton Stops a Nuisance and Saves Money For HG Timber! (13/12/2011 16:57:18)

Nuisance tripping of its main incoming circuit breaker, a major problem for HG Timber, one of the UK's leading manufacturers of timber pallets and warehouse decking, has been completely eliminated following a free on-site power factor correction survey carried out by Eaton's Electrical Sector. The actions taken as a result of the survey have also made it possible for HG Timber to cut its energy bills by 20%, with a corresponding reduction in its carbon footprint of 62 tons of CO2.

Linear product for innovative packaging machinery (13/12/2011 16:49:10)

Effective automation is an important element in minimising unit costs and assuring quality but there are many applications in the packaging sector where an off-the-shelf solution is not an option. To build the bespoke system the designer needs the supply of reliable components, sub-assemblies and even complete turnkey solutions and this is where linear motion specialist, HepcoMotion®, has considerable strength.

WEG LAUNCHES NEW ENERGY EFFICIENT W22X FLAMEPROOF MOTORS FOR DEMANDING HAZARDOUS AREA APPLICATIONS (13/12/2011 16:40:39)

WEG is providing the highest levels of energy efficiency and protection in hazardous environments, following the launch of the W22X range of flameproof electric motors, which were shown as part of WEG's extensive automation portfolio at the SPS/IPC/Drives 2011 exhibition at Nuremberg.

VW up! featuring steering column EPAS and bearings produced by NSK (13/12/2011 16:13:17)

Good steering assistance, perfect handling and the utmost energy efficiency: drivers expect all these things not only from mid-range cars but also from compact models. Volkswagen had to measure up to these expectations when defining the specifications for the up! steering system and chose electric power-assisted steering (EPAS) produced by NSK Steering Systems.

Diaphragm pump performance boosted by new motor (13/12/2011 15:54:59)

Increased torque and performance at pressure, longer life and significantly enhanced EMC characteristics are innovations provided by a new range of 230VAC motors introduced by Becktech for Aquatec 3-chamber diaphragm pump heads.

Altair Announces Successful 5th European HyperWorks Technology Conference (12/12/2011 22:17:07)

Altair Engineering, Inc., announced that the 5th European HTC, held from November 7th – 9th, attracted more than 500 engineers, managers and simulation experts from 25 countries. Among the broad scope of topics, this year's conference covered lightweight design, composites, optimization, CFD, NVH, crash, and more. The first conference day started with the academic user day and three technology workshops on CFD, NVH, and composites. Following the workshops, attendees had the opportunity to visit the technology showcase with customers' exhibits and partner booths to gain insight into innovative client projects and partner solutions.

Arcolectric smart maintenance indicators help PestWest customers to see the light (12/12/2011 22:13:18)

Arcolectric, an Elektron Technology brand, has customised one of its components for PestWest Electronics Ltd's electronic fly killer. The smart indicator design was integral to the fly killer's ability to let users of the device know when essential maintenance was needed.

Loading bays are Like F1 Cars; Getting Faster and Safer in 2011 (12/12/2011 22:08:02)

Ed Wilks, Operations Manager at loading bay equipment specialist, sara LBS, looks back over sara's developments in 2011 and discusses what is next for the industry. Two new additions to our popular sara LBS Sprint range of high-speed internal and external doors have seen sales grow considerably in the food processing and clean room sectors; offsetting the general slowdown in the construction of new warehouses that require complete new loading bay solutions including doors, scissor lifts, dock levellers and loading bay sealing pods. Retrofit and upgrade work on both internal and external access systems has also remained strong. The company specialises in hard wearing, but technically advanced solutions that improve safety, and reduce energy use, both of which are key issues for the industry going forwards.

Excelsys Xlite - Most Compact 750W Output Configurable Power Supply in Its Class (12/12/2011 21:52:55)

The Xlite series of user configurable modular power supplies is part of the Excelsys Technologies class-leading Xgen range and provides up to 750W output power in a slim-line 1U, 40.4 x 260 x 89mm package. Offering users up to 8 isolated outputs the Xlite family is the most compact and flexible power supply in its class and brings affordable configurable power to the 200-750W market. The complete Xgen series is now available with conformal coating for protection against harsh environments making them suitable for MIL-COTS applications.

Video of the Week – Take a ride with igus energy chains (12/12/2011 21:41:32)

Cable carrier specialist igus UK supplies and manufactures plastic energy chains and energy chain systems for moving cables that are durable, low cost and, above all, maintenance free. When commissioned to design the iconic theme park ride 'Star Flyer' – an extreme vertical Chair-O-Plane – in Vienna, ride designer Funtime Industries faced the mammoth task of specifying a reliable moving system to supply power up to the top of the 117 metre tower.

Low Noise, High Resolution Triaxial Accelerometer for Structural Monitoring (12/12/2011 21:35:43)

Measurement Specialties, Inc. has just released to production the Model 4332 triaxial accelerometer. This COTS sensor features damped MEMS sensing technology, an amplified output and is packaged in a rugged aluminum housing with integral cable assembly. It is offered in ranges from ±2 and ±5g with a low-pass filter set at 50Hz. This temperature compensated device has an operating temperature range of -40°C to +85°C and complies with IP68 requirements for submersion in water to a ten meter depth.

NVision Helps Reverse Engineer Optical Retailer's Store Display, Enabling Millions in Annual Sales (12/12/2011 21:28:32)

A national marketing services provider recently used NVision Inc.'s Engineering Service Division to reverse engineer an essential part in a store display for one of the nation's largest optical retailers. NVision was able to quickly scan the part and provide the CAD files necessary to mass-produce it for the display in the retailer's stores nationwide, enabling millions in annual sales.

Molex Impact 100-Ohm Orthogonal Direct Connector Architecture (12/12/2011 21:23:42)

Molex Incorporated launches the Impact 100-Ohm orthogonal direct connector system designed for a direct connection of printed circuit boards using the same daughtercard. Featuring options of 3-through 6-pair, the Impact orthogonal direct technology supports high-speed 25 Gbps data rates and substantially eliminates airflow, cross-talk, and capacitance constraints in high-speed channels that can be introduced through current backplane / midplane laminates.

TDK-Lambda introduces next generation digitally controlled medical power supplies – the CFE400M range (12/12/2011 21:17:27)

TDK-Lambda UK, a group company of the TDK Corporation, introduces its next generation of digitally controlled, AC-DC medical power supplies – the single output CFE400M, which is available in convection and fan cooled versions. Combining a 4kVac reinforced input-to-output isolation with dual fusing and an output-to-ground isolation of 1500Vac, the CFE400M meets IEN/EN/UL/CSA 60601-1 Ed 2 & 3 safety approvals for medical equipment, suitable for BF (body floating) type medical applications.

UV video pole from Ultrafine enables fast inspection of long shafts (09/12/2011 22:47:12)

Long, hollow shafts can be rapidly inspected internally using the new UV Video Inspection System from Ultrafine Technology. The standard system uses a 22.2 mm diameter pole up to 3 m long with a video camera integrated into its far end to provide a high resolution view of any defects.

Dates announced for WWEM 2012 (09/12/2011 22:42:28)

WWEM 2012, the 5th in a series of highly successful environmental monitoring events, will return to the Telford International Centre on 7th and 8th November 2012.

New Deeter Low Volume Liquid Dispenser offers automated control and monitoring (09/12/2011 22:31:40)

The Deeter Group announce the introduction of their new Low Volume Liquid Dispenser. Intended for accurate, repeatable dosing of small volumes of chemicals, colours or flavourings, the Low Volume Liquid Dispenser may be used to control any liquid being dispensed in a laboratory or manufacturing process.

New rugged run-back timers for OEMs (08/12/2011 11:26:55)

Abbeychart has introduced a range of mechanical and electronic run-back timers designed for rugged use and long term reliability

A Parts Services appointed Edbro agents of skip and hook lift equipment for the West Midlands and Mid-Wales (08/12/2011 10:00:37)

A Parts Services, parts supply and maintenance specialists for commercial vehicles, has been appointed as the main distributor of Edbro's range of hydraulic skiploader and hooklift systems to the West Midlands and Mid-Wales. The company will deliver top-level dealership servicing, maintenance and technical support for the Edbro range, reducing costs and lead times for local customers.

NSK EXHIBITS AT 42ND TOKYO MOTOR SHOW (08/12/2011 09:53:39)

NSK Contributes to the Future of Auto mobility and to the Global Environment through Four Technological Advantages: Compact/Lightweight, Low Friction Loss, Ultra High Speed Rotation and Development of Mechatronic Products In recent years, environmental awareness has increased in both developed and emerging economies. Population increases and motorisation have led to the need for higher fuel economy and lower CO2 emissions for automobiles. This has resulted in a variety of technical challenges. In response to the need for improved fuel economy, the focus has been on electrification, as represented by the advent of hybrid cars. As such, the prospect for the early realisation of a futuristic world of electric vehicles does not seem so far away. For the time being, however, internal combustion engines are still in the majority. This being the case, the need for improved efficiency is driving the development for Eco technologies for internal combustion engine applications.

40 Percent Faster Runtime and Enhanced High-Performance Core Design Capabilities Drive Adoption of Magma's Latest Talus 1.2 IC Implementation Platform (08/12/2011 09:51:25)

Magma Design Automation Inc. announced that recent improvements to the Talus 1.2 integrated circuit (IC) implementation platform have triggered a significant increase in customer adoption. Since its initial release 12 months ago, Magma has continued to refine the system, improving runtime by 40 percent and enhancing high-performance core design capabilities. The result is a robust and silicon-proven solution that accelerates development and reduces the cost of advanced-node systems on chip (SoCs).

Christopher Associates Introduces New Edge Coating System for LED Panels (05/12/2011 15:19:35)

Christopher Associates Inc., introduces Shoda Techtron's UVP-630A Edge Coating System for LED substrates. The UVP-630A is a unique solution for LED substrate manufacturers in which a formulated UV curable coating is applied to the edges of the substrate to prevent chemical attack during panel processing.

Mercado Machinery Distributing Jet Edge Waterjets in Mexico (05/12/2011 11:30:28)

Jet Edge is pleased to announce that Mercado Machinery is now distributing Jet Edge precision water jet cutting systems in Mexico. The machine tool distributor has sales offices in Mexico City, Monterrey and Guadalajara.

Techno CNC Routers Introduces New HD Series CNC Router (05/12/2011 11:27:19)

Techno, Inc. CNC Routers is proud to introduce the new HD Series CNC Router, a new precision cutting system. Developed by a team of engineers using global state-of-the-art manufacturing techniques, this all-steel constructed machine utilizes superior quality components such as precision THK rails and bearings, precision rack-n-pinion drives on the X- and Y-axes, and a ballscrew-driven Z-axis.

LAIDLER and TÜV SÜD SUPPORT NEW BARA AUTOMATING MANUFACTURING PROGRAMME (05/12/2011 11:19:35)

Laidler Associates, part of the machinery division of TÜV SÜD Product Service, has announced that it is lending its support to the new Automating Manufacturing Programme, managed by the British Automation and Robot Association (BARA), a PPMA Group Association. The programme, which has recently been awarded £600,000 by the government to fund its activities, has commenced with immediate effect until 31st March 2013 and aims to encourage the uptake of automation among UK manufacturers.

Revolvo insulated bearing technology gains market share (05/12/2011 11:13:25)

"Revolvo's improved bearing insulation technique, combined with short lead times is making an impact on the world market for traction motor bearings" The move away from traditional DC traction motors to AC traction motors on locomotives and multiple unit trains, combined with the widespread use of high power AC frequency inverters to control large rotating machines, has resulted in substantially increased worldwide demand for electrically insulated bearings. Specialist UK bearing manufacturer Revolvo is currently satisfying this growing market through new business from both the premium brand volume bearing suppliers, and OEM manufacturers of railway rolling stock, electric motors and other large rotating machinery.

High Resolution Imaging With No Compromise On Speed (05/12/2011 10:47:53)

STEMMER IMAGING can now offer the new Prosilica GX3300 camera from AVT. The GX3300 combines 8 Mpixel resolution with high speed (240MB/s) data transfer and a frame rate of 17 fps at full resolution, meaning that it is no longer necessary to compromise resolution for speed. Supplied complete with a rich set of smart features, the GX3300 is ideally suited to a range of machine vision applications.

New Product - DRM4000L Dead Reckoning Unit (02/12/2011 15:45:41)

ETLG Ltd (Inertial Aerosystems) announces a new product to our Magnetics range, with an upgrade to the current Dead Reckoning Module. The Honeywell DRM4000L offers the perfect solution for personnel on foot to provide continuous, gap-free, position location, with or without an external GPS, to provide the user's position relative to an initialization point.

Flowform screws (02/12/2011 15:12:37)

Arnold Umformtechnik developed Flowform screws in response to the increasingly complex requirements for sheet metal joining. These trilobal (triangular) screws utilise the technology of flow-hole forming in the fabrication process. Flowform is a cost optimised solution that offers higher process reliability for threaded fastener joints and considerable advantages over alternative sheet metal joining methods: ease of loosening, accessibility, positioning, reassembly with threaded fasteners, freedom from fabrication residues.

Molex Demonstrates World’s First 100 Gbps Integrated Optical Transceiver Products (02/12/2011 15:10:51)

Molex Incorporated has successfully demonstrated the industry's first single chip CMOS photonics-based 100 Gbps optical interconnect to support next-generation cloud computing, data centre and high performance computing connectivity. In a collaborative partnership with Luxtera, the new Molex silicon photonics-based active optical devices comprise four 28 Gbps transmit and receive channels powered from a single laser for an aggregate data rate of more than 100 Gbps. Molex CMOS photonics-based connectivity solutions are an outcome of ongoing development and collaboration structured during the Molex acquisition of Luxtera's Active Optical Cable product line.

OK Labs Drives into Automotive Systems with Embedded Virtualization for In-Vehicle Infotainment (02/12/2011 15:04:03)

Open Kernel Labs (OK Labs) has announced availability of OKL4 for In-Vehicle Infotainment (IVI). OKL4 embedded virtualization enables automotive suppliers to meet requirements of both consumer and automotive applications. OKL4 lowers costs by eliminating separate physical processors for each domain and provides an integration platform to align the lifecycles of consumer-facingwireless technology with safety-critical in-car capabilities.

New Deeter Low Volume Liquid Dispenser offers automated control and monitoring (02/12/2011 14:53:15)

The Deeter Group announce the introduction of their new Low Volume Liquid Dispenser. Intended for accurate, repeatable dosing of small volumes of chemicals, colours or flavourings, the Low Volume Liquid Dispenser may be used to control any liquid being dispensed in a laboratory or manufacturing process.

Weg Announces Creation Of Joint Venture With M. Torres Olvega Industrial (Mtoi) To Manufacture Wind Energy Generators (30/11/2011 15:02:32)

WEG S.A. has announced the signing of a memorandum of understanding and the concluding of a technology transfer agreement with M. Torres Olvega Industrial (MTOI) of Spain. The memorandum of understanding and the technology transfer agreement will result in the creation of a joint venture between WEG and MTOI, with equal participation, for manufacturing, assembling, installing and marketing of wind turbine generators, as well as operation and maintenance services.

Amplicon launch new division – Engineering Services (30/11/2011 14:10:54)

Amplicon has announced the introduction of a new division, Engineering Services. This new venture, as well as creating new employment opportunities, is to provide the market place with a trusted partner who can be viewed as an extension of the customers own team creating value that can be delivered straight to the bottom line.

Steadmans composite panel production is one step ahead with waterjet cutting solution (30/11/2011 13:48:38)

Steadmans has improved the quality of its range of insulated panels through investment in a waterjet cutting process with Wightman Stewart. An in-line waterjet cutting solution has given AS 35 insulated panels a superior finished product quality, offering major customer benefits.

Burkert's Mobile Clinics Provide On-site Solutions for Hygienic Processing Issues (30/11/2011 13:40:14)

Burkert UK is extending the scope of its recent free Hygienic Processing Training courses, with a series of mobile clinics that are dedicated to customer specific issues in Hygienic Processing. Similar to seminars, but customised to whatever issues the customer wants to discuss, the clinics are provided onsite at customers' premises - at a time that suits them - by technical experts in Hygienic Processing in 30-minute rolling presentations.

ESAB Poster Lists Recommended Welding Consumables (30/11/2011 13:35:15)

ESAB is offering a free full-colour poster, entitled Recommended welding consumables, for use in design offices, fabrication shops, quality assurance departments, training facilities and educational establishments.

New Eaton SmartWire-DT Business Partners: Hilscher and Wöhner Sign Cooperation Agreement at SPS/IPC/DRIVES 2011 (30/11/2011 12:06:02)

Eaton's Electrical Sector presented two new SmartWire-DT business partners at SPS/IPC/DRIVES 2011 in Nuremberg last week. Hilscher, a system automation company in Hattersheim and a leader in industrial communications systems, and Wöhner, a specialist in bus bar system technology, both signed cooperation agreements at the trade event and declared their intention to integrate Eaton's SmartWire-DT interconnection and communication system in their products.

Stopfreeze Protection From Intertronics (30/11/2011 11:59:20)

The winters, they tell us, are getting colder and trace heating systems for vulnerable water pipes are finding greater demand. As part of their development process STOPFREEZE were looking for a superior way of protecting their in-line thermostat from water ingress and physical damage in its outdoor situation. Their solution came in the shape of a polyurethane potting compound from Intertronics, together with appropriate metering and mixing equipment for production filling of the thermostat housing.

“Cosaf provide their low carbon cooling system to Siemens Server Room” (30/11/2011 11:40:11)

DATA Centres and Server Rooms are one of the most challenging environments to control given the business critical consequences of a system failure due to unpredictable temperature hot spots and overheating of the vital equipment housed within these increasingly integral environments. For any company, network downtime is not an option, therefore investment into enhanced CRAC units has seen a significant increase and focus on climate control within data centres over recent years. Not only this, but the impetuous placed upon environmental awareness has also raised a challenge to businesses who are looking for a low carbon, low energy cooling solution that maintains performance without compromising system integrity. Up until very recently this approach has not been possible, as the technology required was not developed for commercial applications.

Electrolube Announces New Roles (30/11/2011 11:35:44)

Electrolube has announced two new key appointments; a European Brand Director and a European Technical Support Specialist. These new roles reflect the company's commitment to building and maintaining a strong and dynamic management team. Robert Crosby-Clarke will take up the position of European Brand Director and brings an extensive knowledge of the company and its products to the role, having worked for Electrolube during the past 16 years. He initially commenced working for Electrolube in the Research & Development Department and then progressed through various sales roles, culminating in his being appointed UK Sales Manager three years ago.

sara LBS Customer Service Earns Repeat Business with Leading UK Supermarkets (30/11/2011 11:07:20)

sara LBS has been specified to install a number of products from its range of loading bay equipment and industrial doors into a leading chain's supermarkets across the UK. Having previously worked with sara, the company was confident that the loading bay specialists would deliver high quality products that had been designed around their particular specifications.

Burglar resistant CS outdoor enclosures from Rittal (29/11/2011 17:32:49)

Developed especially for high MTBF applications requiring protection against vandalism, a new double-walled WK 4 outdoor enclosure is now available from Rittal. Giving optimum protection against unauthorised access to DIN EN V 1630:1999-04, the new CS outdoor stainless steel enclosure meets the requirements of burglar resistance class WK 4.

New, Indexable-Insert Chamfering Tools Include Universal Model (29/11/2011 17:28:21)

When the Japanese tooling manufacturer, BIG Daishowa, first introduced its purpose-designed C-Cutters for high precision plunge-chamfering of holes, it used a standard chamfer angle of 45 degrees. Now the company has introduced two additional fixed-angle cutters for chamfering at 30 and 60 degrees respectively, as well as a universal type on which the angle can be set anywhere between five and 85 degrees.

Pay As You Sense (29/11/2011 17:09:48)

Equipment rentals are increasingly helping companies overcome the hurdle of finding investment capital to fund development and verification projects. The current phase of the economic cycle, recovery from a slowdown, is always difficult and frustrating, as Mark Ingham of Sensor Technology identifies: "Companies are seeing their markets improve, but don't have the reserves to finance all the activities that will kickstart their sales. What money there is has to be used carefully, which usually means funding some projects but not others. As a result opportunities have to be missed."

Real Savings – the Results of Running a CX14 Cylinder for One Year (29/11/2011 16:41:52)

It has been a little over one year since Edbro launched the latest cylinder from its CX range, the CX14. Designed as a compact combined tank and cylinder unit, the CX Series provides weight saving benefits to rigid truck applications from 15 to 32 tonnes GVW. Lafarge Aggregates & Concrete UK opted to run the new cylinder as part of a weight saving initiative; it is now one year on and thanks to positive results, the company has opted to specify the CX14 exclusively on all rigid tipper fleet acquisitions.

Thermal Energy International Raises The Bar On Thermal Efficiency On Stand C8 At Maintec 2012 (29/11/2011 12:16:26)

Thermal Energy International Inc. (TEI) will be exhibiting its range of awarding winning energy efficiency products at standon stand C8 at the NEC Birmingham from 28th February to the 1st March. TEI's products include its GEM venturi orifice steam traps and its flue gas condensing heat recovery economisers or economisers.

Sherborne Sensors expands product range with Gravity-Referenced Tri-Axial Inclinometer (29/11/2011 12:12:41)

Sherborne Sensors announces the T835 Series, a high precision, gravity referenced, tri-axial inclinometer, designed for application in physically challenging and space constrained environments. Available in angular ranges ±14.5° to ±60° and measuring just 25.4mm in diameter, the T835 is manufactured from aerospace quality stainless steel making it extremely robust and ideal for measurement in confined areas such as borehole applications and seismic studies. The inclinometer can also survive and operate in extremes of temperature, ranging from -4 to 158 degrees Fahrenheit.

FLIR Thermal Imaging Camera Pinpoints Carbon Monoxide Emissions (29/11/2011 12:10:50)

FLIR Advanced Thermal Solutions (ATS) has announced the new FLIR GF346 Thermal Imaging Camera. Able to remotely scan large areas rapidly, and pinpoint gas leaks in real time, the FLIR GF346 is ideal for safely monitoring plants where it is difficult to reach components with contact measurement tools such as gas sniffers.

The Ubiquitous Wing Nut – An Elesa Favourite (29/11/2011 12:07:08)

Whether used for clamping, adjustment, assembly or positioning, the combination of a machine screw with a wing nut has been around for "ever" and consequently has been addressed by Elesa in their role as market leading standard component suppliers. The Elesa range of wing nuts, wing screws and matching wing knobs – machine screws with wings – run from reinforced technopolymer to stainless steel.

Electronics Packaging Hardware Makes It Quick And Easy From FDB Panel Fittings (29/11/2011 11:05:23)

It has come to the attention of the engineers at FDB Panel Fittings that assembly of cabinets for electronic equipment can be a significant bottleneck in the production process with consequent downstream effects on productivity. Normally the idea of reducing time might also involve reducing quality in some way, but the solution was found in D-SNAP and SNAPLINE technology which actually offers very high quality outcomes with assembly time reduction in the order of 90%.

Automotive grade high-current LED driver ICs (28/11/2011 16:44:33)

The A6265, A6266 and A6267 from Allegro MicroSystems Europe are a new family of automotive-grade, high-current LED driver ICs with extensive diagnostics and protection features. The new devices, which are fully qualified to the AEC-Q100 Grade 0 Automotive Specification, are DC-DC converter controllers, with the A6265/A6267 configurable as either boost or buck-boost converters and the A6266 as a boost converter only.

Electrolube Confirm Productronica 2011 as the Best Yet (28/11/2011 16:17:53)

Electrolube has hailed electronic exhibition Productronica as their busiest yet! Over 38,500 visitors attended the exhibition in Munich, Germany from 80 different countries and this increase in footfall from previous years has been reflected in Electrolube's enquiry list. Ron Jakeman, Electrolube's Group Managing Director said: "Productronica 2011 was a really positive show. The decision-making status of visitors at the exhibition was matched by the impressive list of enquiries that we obtained over the four day exhibition.

Transdev adds Esband and Werner GRAF endless flat belts (28/11/2011 14:22:08)

Transmission Developments has signed a UK distribution agreement with the endless flat belt specialist Max Schlatterer GmbH, bringing the premier Esband and Werner GRAF brands to its comprehensive range of belting products. These drive and conveyor belts are manufactured using a genuinely endless woven technique in a wide range of carcass materials and finished with special coatings that are matched to the friction coefficient, durability, speed and accuracy requirements for high precision/high performance power transmission and conveying.

Leading UK precision engineering company invests over £2million in new machine tools and factory expansion (28/11/2011 14:07:42)

Micro Precision Gear Technology of Hemel Hempstead is bucking the current trend of a flat market for UK manufacturing and increasing capacity both for its precision gear component business and its high-precision assembly service, both driven by orders from motorsport teams and subcontract work for civil aerospace and military related hardware.

SOUTHERN MANUFACTURING 2012, 15th & 16th February, Farnborough (28/11/2011 12:11:25)

In previous years at Southern Manufacturing, TRUMPF has focused on its leadership in laser technology for product marking. The 2012 event will be no exception but in addition the company will also demonstrate its prowess in precision bending with one of its outstandingly productive TruBend machines.

Welding Innovation Can Keep Australian Mining On Track (28/11/2011 12:03:52)

Enhanced rail repairs could significantly improve the safety, productivity and reliability of Australia's hundred billion dollar mining industry, according to research by ESAB, the world leading welding equipment company.. It is vital for those responsible for rail networks to look in depth at productive and safe ways to repair of this crucial piece of economic infrastructure and ESAB's study offers the insight they need, says Tamas Sandor, Head of Global Rail and Repair & Joining Manager at ESAB.

JBC Tools Announces Success at Productronica International Trade Fair (28/11/2011 11:46:00)

JBC Tools announces that Productronica 2011 (the International Trade Fair for Innovative Electronics Production), which took place in Munich, Germany was a great success for JBC Soldering. JBC Tools displayed several new world-class products including the "JBC Touch," which drew a great deal of interest because of the features the unit incorporates and the ease of use of its touch screen display. Apart from the high-resolution screen and fantastic menu interface, the unit received much attention due to its connectability because it can be linked to an Ethernet network and connected to a microscope for viewing on the soldering station's 3.5 screen.

Reducing time and costs for automation system design (25/11/2011 16:48:47)

As automation systems get more sophisticated, so the development and maintenance of the disparate components and production lines becomes more complex. Now Mitsubishi Electric has addressed the problem, with an alternative approach to automation system design that reduces engineering time, effort and costs, and helps to bring down total cost of ownership.

Parking and access control applications provide challenges for Rotalink (25/11/2011 16:19:34)

Rotalink takes a practical and unique approach to application solutions for miniature motors, mechatronics transmissions and controls which is exemplified in its design and manufacturing capabilities for customised assemblies used in parking and access control equipment. Like many miniature power transmission and actuator applications, motion component design for parking meter locking mechanisms, ticket transports, coin, cash and card handing systems, coin escrow units, and ticket guillotines are often characterised by the need for space efficiency, uncompromised reliability and competitive pricing.

125 Million Pixel Camera Now Available From STEMMER IMAGING (25/11/2011 16:11:20)

STEMMER IMAGING can now provide system developers with specialized monochrome and colour cameras which can provide ultra-high resolution yet use standard lens technology. Measuring just 55 x 55 x 84.5 mm, the CVC Ultra 125MP CL monochrome and CVC Ultra 45MP CL colour cameras offer a resolution of up to 125 and 45 million pixels respectively using pixel shift technology. Applications that benefit from this exceptional performance include all types of surface analysis, the inspection of printed circuit boards, documentation tasks and many scientific applications.

Expansion For ESAB Mexico (25/11/2011 15:58:36)

With over 100 years of experience, a presence in over 80 countries and more than 8,000 employees worldwide, ESAB is the world's most recognised brand in welding and cutting and the company is proud to report expansion of its activities in Mexico with three main areas of growth. Supply Chain – In the last three years ESAB has improved its distribution structure in the country, going from nine poorly sited regional warehouses to four large distribution centers in Mexico City, Guadalajara, Monterrey and Mexicali. This has allowed the company to improve its service performance, reduce errors and still maintain a competitive geographical coverage of the Mexican market. A fifth distribution center is being considered for opening in 2012.

Energy efficient enclosure climate control (25/11/2011 15:46:19)

Rittal continue to improve the energy efficiency of enclosure climate control solutions by incorporating ever more innovative technologies into their cooling products. The Eco-mode control system from Rittal employs an intelligent strategy to effectively target the use of energy by disabling the internal fan when the temperature inside the enclosure falls to 10° K below the setpoint temperature. The fan is then enabled for a period of 30 seconds every 10 minutes to ensure the accuracy of the sensed temperature. When the temperature rises above 10° K below the setpoint, the fan is permanently enabled.

New TESEQ Common Mode Absorption Device ensures reproducible emissions measurement meets CISPR 16-1-4 and CISPR 16-2-3 over frequency range 30 MHz to 200 MHz (25/11/2011 15:37:43)

Teseq has introduced a new line termination clamp as required by CISPR test methods. Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions. The key parameter is the asymmetrical impedance (common-mode impedance) which can be seen as the common-mode impedance to the reference ground.

New Energy Display Association Will Make Consumer Savings A Reality (25/11/2011 15:32:47)

Energy displays have proven highly successful in helping consumers to reduce electricity consumption and will play a significant role in the context of the UK's national Smart Meter programme. The recently published Empower Demand report from VaasaETT, Global Energy Think Tank compared the results of trials around the world and found average annual electricity savings of 8.68% for customers supplied with IHD's.

Aerotech's A3200 MotionPAC combines an IEC61131-3 PLC and advanced motion in one single control solution (25/11/2011 15:09:16)

Aerotech's new A3200 MotionPAC brings together sophisticated machine control and advanced multi-axis motion control in a single development environment that can include IEC61131-3, PLCopen, .NET, AeroBasic™, G-code and many other programming languages. With easy to use diagnostics, debugging and I/O mapping tools plus automatic memory management and offline program simulation, MotionPAC also allows common tags and variables across languages with its unique Global Tag Database – for advanced motion and automation systems these features combine for greatly simplified commissioning and reduce machine development timescales by as much as 30% to 50%.

Safe Real-time Detection of Carbon Monoxide (25/11/2011 14:54:03)

FLIR Advanced Thermal Solutions (ATS) has announced the new FLIR GF346 Thermal Imaging Camera. Able to remotely scan large areas rapidly, and pinpoint gas leaks in real time, the FLIR GF346 is ideal for safely monitoring plants where it is difficult to reach components with contact measurement tools such as gas sniffers.

Queen's Honour For Welding Expert (25/11/2011 14:50:38)

Dr Bob John, the former Chief Executive of TWI, was awarded an OBE for services to industry in the 2011 Queen's Birthday Honours list. Dr John is a graduate metallurgist of the University of Wales (Swansea) where he first became involved with welding through a PhD on the weldability of 5% nickel steel.

Nihon Superior Highlights Copper Erosion Differences between Low-Ag and No-Ag Lead-Free Solders (25/11/2011 14:35:35)

Nihon Superior Co., Ltd has highlighted the greater effectiveness of the nickel addition in its unique SN100C lead-free solder in limiting copper erosion during soldering processes. Nihon Superior has been prompted to draw attention to this fact by the claims and counterclaims that have been made for various low- and no-silver lead-free solders currently offered in the market.

Molex and TMG Collaborate to Provide Customised Industrial Communication Solutions (25/11/2011 14:32:41)

Molex Incorporated and TMG Technologie und Engineering GmbH have announced a strategic cooperation focusing on industrial communication technologies and service activities for protocol stack integration. Together Molex and TMG will promote and provide customer dedicated solutions based on industrial communication technologies, such as Ethernet/IP and PROFINET, to device and system manufacturers as well as machine builders.

DTM-C Range of Medical AC-DC External Power Supplies from TDK-Lambda (25/11/2011 14:23:08)

TDK-Lambda UK has introduced the DTM-C series of medically-certified AC-DC external power supplies – the DTM65-C model with output power ratings from 40 to 65W and the DTM110-C rated at 90 to 110W. Offered with a choice of output voltages from 12 to 48Vdc, the DTM-C series operates from a universal AC input of 90 to 264Vac (47-63 Hz). With average efficiency greater than 87% and offload power consumption of less than 0.5W, all models in the DTM-C series comply with ErP (Energy Related Products), EISA (Energy Independence and Security Act of 2007), CEC (Californian Energy Commission) and Global Efficiency Level V regulations.

Exar Selects Magma’s Tekton and QCP to Accelerate Sign-Off of 40-nm SoCs (25/11/2011 14:20:54)

Magma Design Automation announced Exar Corporation has adopted the Tekton static timing analysis and QCP extraction software to accelerate sign-off and engineering change order (ECO) flows for 40-nanometer systems on a chip (SoCs). Exar selected the Magma solution after an extensive evaluation in which Tekton and QCP were shown to efficiently perform multi-mode multi-corner analysis and extraction, to deliver 5X faster runtime than traditional tools, and to provide sign-off quality results. Exar is now leveraging the Magma solution to shorten development cycles and accelerate shipment of next-generation devices to customers to meet dynamic market requirements

Powerlink for JVL integrated servo motors (25/11/2011 13:17:01)

JVL has for many years been one of the leading companies in the field of integrated servo- and stepper motors. JVL has set the goal of being the world leader in industrial Ethernet for integrated motors with the widest range of Industrial Ethernet communications for the range of JVL Integrated Servo and Stepper motors. In recent years, JVL has gained a high level of know-how and technological expertise and can now present a very smart way of using several Ethernet communications with only one expansion module.

Fastener & Adhesives Show Heads North (25/11/2011 11:19:15)

April in Harrogate is expected to be an interesting month for design and production engineers based in the north of the country, especially those with a remit covering fasteners and adhesives. The FAST & IASE exhibitions, which have found success in the Midlands, London and the Southwest, are now to visit Harrogate on April 26th 2012. FAST showcases everything good in mechanical fastening and IASE (Industrial Adhesives, Sealants & Encapsulants) does likewise in the arena of industrial and engineering bonding.

Analytical Technology Continues Water Monitoring Success by Securing Prestigious Framework Agreement with Wessex Water (25/11/2011 11:07:43)

Specialist electrochemical sensor manufacturer Analytical Technology Inc. today announces that it has been awarded a framework agreement to supply dissolved ammonia monitoring systems to Wessex Water. Following a detailed decision-making process in which Wessex Water evaluated a range of monitors against stringent criteria, Analytical Technology was awarded an AMP 5 framework agreement for its Q45N dissolved ammonia monitor.

Haydon Kerk Motion Solutions Introduces IDEA Size 23 Programmable Linear Actuator (25/11/2011 11:01:28)

Haydon Kerk Motion Solutions has introduced the Haydon RoHS compliant IDEA Size 23 Non-captive Linear Actuator. The IDEA Size 23 linear actuator combines high-output force, rotary to linear motion, stepper drive and programmable control in a single integrated package. Linear travel per step ranges from 0.000125" (0.0031mm) to 0.005" (0.127mm) and output force up to 200 lbf (890N).

Magma’s Titan Adopted by Fujitsu Semiconductor Limited to Improve Analog Design Productivity (25/11/2011 10:36:11)

Magma's Titan Adopted by Fujitsu Semiconductor Limited to Improve Analog Design Productivity Extensive evaluation proved Titan ADX's ability to increase designer productivity, accelerate turnaround time on SoCs and to reduce the cost of analog design and reuse.

Quality must be maintained, EAL advises after Government announce £250m vocational training boost (24/11/2011 16:25:48)

Quality must be maintained, EAL advises after Government announce £250m vocational training boost The Government's £250 million plan to boost vocational training programmes has been welcomed by EAL, which advises businesses to work with an industry awarding organisation to ensure quality of development and delivery.

Atlas Copco Compressors appoints Paul Clark as Industrial Air Business Line Manager (24/11/2011 16:14:42)

Atlas Copco Compressors has announced the appointment of Paul Clark as Business Line Manager of its Industrial Air division in Great Britain. Commenting on his new position in the company, Paul Clark said: "It is a challenging role. I see my task as ensuring that the company continues to be represented by professional, trained, motivated and experienced people, backed by world-leading products."

Electric actuators replace fluid power alternatives for off-highway vehicles (24/11/2011 16:09:57)

As an authorised distributor for Thomson, Heason Technology is increasingly specifying and supplying the linear drive and guidance systems manufacturer's Electrak Pro range of high performance electric actuators to replace traditional hydraulic and pneumatic cylinders used in off-highway construction, agricultural and recreational machinery.

Analog Bits Accelerates Analog IP Verification Using Magma’s FineSim SPICE (24/11/2011 16:08:02)

Magma Design Automation Inc. has announced that Analog Bits, Inc., the integrated clocking and interface IP leader, accelerates analog IP verification for its precision clocking macros, programmable interconnect solutions and specialized memories using FineSim™ SPICE multi-CPU circuit simulation technology. Using the FineSim SPICE multi-CPU simulation technology, Analog Bits has significantly shortened simulation runtimes, increasing simulation coverage without sacrificing accuracy.

Membrane filtration for the treatment of effluent is providing manufacturers with significant cost savings (24/11/2011 16:04:33)

Axium Process' membrane filtration systems are providing manufacturers with significant cost savings by reducing effluent volumes and disposal costs as well as recovering up to 95% pure water that can be reused in the process itself or for general cleaning duties depending upon the application.

Eriez Magnetics Welcome Three New Apprentices (24/11/2011 15:56:41)

Eriez Magnetics Europe Ltd has given three young men from the local community mechanical and electrical apprenticeships. The fantastic opportunity will not only enable the new starters to gain a new set of skills and experience working life, but will also help develop a new generation at Eriez.

Video of the Week – igus c-chain for continuous movement (24/11/2011 15:51:36)

Energy chain innovator igus UK has developed the new c-chain energy chain system, which allows machine signal and media to be carried in continuous motion. The intelligent c-chain design concept originated from a solution igus developed to eliminate the empty runs that conventional pick and place applications suffer from due to linear motion. The new system moves in a continuous circular motion, smoothly and without vibration at a continual speed of between 2 and 3 m/s – creating an increase in productivity of up to 30%.

ESAB On Show In China (24/11/2011 15:47:06)

The 16th Beijing Essen Welding & Cutting Fair was held earlier this year at New International Expo Center in Shanghai. Ranking in the top two welding and cutting shows in the world, Beijing Essen Welding & Cutting Fair is a yearly event, alternately held in Beijing and Shanghai.This year there were 918 exhibitors from 29 countries and the exhibition attracted nearly 30,000 visitors from more than 70 countries.

Molex Offers Internal Mobile TV Standard Antenna for CMMB Enabled Devices (24/11/2011 15:42:46)

Molex Incorporated has announced the release of an internal Mobile TV Standard Antenna compliant with China's Multimedia Mobile Broadcasting (CMMB) standard for AV encoding. The economical, passive plug-and-play Mobile TV Standard Antenna can be integrated internally into any CMMB enabled mobile device.

AGY To Exit Lot Glass Business Due To Decline In Demand (24/11/2011 15:40:01)

AGY has announced plans to exit the Lot Glass business. AGY's glass fiber Lot Glass yarn is used as reinforcement for high silica fabrics in both aerospace and military applications where traceability is of key importance. The determining factor, explained Drew Walker, AGY Vice President of Sales and Marketing, was the significant decline in demand for Lot Glass G150 during the past year. With the termination of the space shuttle program, AGY has no expectation of improvement in coming years. "With limited forecast volume expected from key users," he explained, "AGY has made the decision to exit the Lot Glass business."

British Manufacturing Forging Ahead, Despite The Uncertainty (24/11/2011 15:34:07)

The in-house exhibition held by Star GB at its Melbourne technical centre from 8th to 10th November 2011 generated eight sliding-head lathe orders valued at almost £1.3 million, the majority for delivery before the end of the year. A total of 150 visitors from 91 companies were welcomed by managing director Bob Hunt and his team, a significant increase compared with last year's show. The eight companies placing orders were all contract manufacturers, two of which were new to Star GB. The mill-turn centres spanned the capacity range from 16 mm through 20 mm to 32 mm, of which four units were sold.

Dekker Holding benefits from Cadac Organice and Microsoft SharePoint (24/11/2011 15:23:52)

Cadac Organice, a Microsoft Gold ISV Partner, has implemented its SharePoint-based solution for Engineering Document Management at Dekker Holding. The solution improves the decisiveness of employees and increases project insight. Dekker Holding Krabbendam is an innovative and leading construction company with three divisions: construction company K. Dekker, construction company De Bie & Seignette, and construction company Dekker Bouw Bergen. Among others Dekker Holding is a specialist in concrete works, both above and below water level. Recent projects include concrete works and foundations for wind turbines on land and in the water. In addition they offer a unique combination of building & construction expertise and civil engineering expertise within one and the same company, which is often an advantage in project tenders.

ESAB’S Caddy Mig Portable Mig/mag Welders Aid Maintenance At Noble Foods (24/11/2011 15:19:01)

Caddy Mig portable welders are proving their worth at the maintenance depots of Noble Foods, one of the UK's leading egg producers. The portability of the units and their ease of use make them ideal machines for maintenance and repair work. Noble Foods is the leading supplier of fresh eggs to the major retailers. In addition, its Egg Products Division is now the market leader in the UK offering a range of products to meet the needs of the food manufacturing and foodservice sectors. Operating from five manufacturing sites Noble Foods' Milling Division supplies poultry and pig feed to livestock producers throughout the UK. Noble Foods also processes hens, chickens and broiler breeders

High Quality Apprentices At ESAB Shipweld Final (24/11/2011 15:14:11)

The UK's best shipyard welding apprentices were put through their paces at the yard currently building Britain's biggest ever ships. Babcock in Rosyth won the team crown at the ESAB ShipWeld 2011 final on home soil, overlooked by the yard where the new Queen Elizabeth Class aircraft carriers will be assembled. It is the second time Babcock took the "Best Yard" ShipWeld title, having won in 2009 at BAE Barrow.

Borri's Power Solutions To Light Up Data Centre Show (24/11/2011 15:11:47)

Data Centre World Conference & Expo, 29th February - 1st March 2012, The Olympia National Hall, London, Stand Number A75. Borri Ltd, will be making its UK exhibition debut at the 2012 Data Centre World Conference & Expo, showcasing a wide selection of its high efficiency UPS solutions. The show is the perfect platform for Borri to demonstrate how it can deliver efficiency without compromise and help data centres explore and understand the true cost of power. The UPS products on its stand can offer businesses affordable solutions that take into account power output, day-to-day energy consumption and environmental impact.

New WIN-911 V7.10 Integrates Archestra Alarms, 2-Way SMS Messaging and Group Email Notification (24/11/2011 15:03:32)

The power, functionality and flexibility of Products 4 Automation's (P4A) WIN-911 alarm notification software have been greatly increased with the addition, on new Version V7.10, of Wonderware Archestra Direct Connect, plus a new 2-way SMS feature, and a new group Email function providing notification on a single alarm event.

Advanced Utility Systems and HiQube Partner to Deliver CIS Analytics Solution (24/11/2011 14:55:32)

HiQube, a division of Altair Engineering, Inc., and Advanced Utility Systems (Advanced), a division of N. Harris Computer Corporation, today announced a multi-year, non-exclusive agreement to develop and market a business analytics solution for Advanced's CIS Infinity® utility customers. Branded as Infinity.BI, the stand-alone customer information systems (CIS) analytics solution will provide powerful new business analytics capabilities for Advanced's CIS Infinity utility customers.

MAPAL replaceable head tools combine precision with economy (24/11/2011 13:09:54)

The new high-precision CFS connection system from MAPAL, a world leader in precision machining solutions, now enables machine tool users to enjoy the substantial cost savings associated with replaceable-head tools without sacrificing accuracy or convenience. This development is particularly important in the light of the continually rising price of carbide cutting materials. Designed from the outset with ease of use in mind, the new MAPAL CFS connection guarantees a radial run-out accuracy of 5 µm or better. This means that tool holders incorporating the CFS connection can be used as the primary system for drilling and milling, as well as for reaming. In addition, replaceable head tools using the new connection achieve the same service life as monolithic tools and so significantly reduce process costs.

ESAB Demobus At Czech Welding Conference (24/11/2011 13:06:03)

With over 100 years of experience, a presence in over 80 countries and more than 8,000 employees worlrdwide, ESAB is the most recognised brand in welding and cutting. The internationally famous Vamberk Welding Conference recently took place in the Czech Republic and ESAB took centre stage with the company's all new Demobus. The company's experts were available to demonstrate what is new in welding and cutting.

Revolvo helps keep wind turbines turning (24/11/2011 13:01:32)

While there is still debate about the future for energy resources in the UK and around the rest of the world, one thing is for sure; wind turbines are becoming increasingly popular and are now a common site around the British Isles. For wind farms to have a chance of operating efficiently and meeting EU targets for renewable energy generation, it is vital that refurbishment services are available that keep wind turbines working in the harsh weather conditions they are subjected to. Thanks to its recently updated production facilities, Revolvo is able to manufacture large diameter replacement bearings to very short deadlines; reducing refurbishment lead times while increasing refurbisher's productivity. The issue of wind turbine refurbishment is a relatively new one; the first turbines were installed in significant numbers about ten years ago so components are only recently beginning to fail and require refurbishment. The refurbishment process usually involves gearbox rebuilds and the

Vero announce the launch of Machining STRATEGIST V13.0 (24/11/2011 12:59:52)

Vero Software are pleased to announce the release of Machining STRATEGIST V13. A powerful multi-axis CAM solution that generates optimum HSM roughing and finishing CNC toolpaths for both the office and shop-floor environment. Machining STRATEGIST is a CAD independent solution and can work with data from all major 3D modelling systems. Within the latest release, support for VISI 19 has been included and the CAD interfaces have been aligned to Parasolid v24, SolidEdge ST4 and Catia v5 r21.

WEG establishes joint venture with CESTARI Industrial and enters power transmission business (24/11/2011 12:58:32)

WEG S.A. and CESTARI Industrial e Comercial S.A. have established a joint venture for the development, manufacturing and distribution of gearboxes and gear motors. Upon this transaction, WEG will acquire 50%-plus-one-share of the joint venture company based on CESTARI's assets related to the manufacturing of gearboxes and gear motors, with expectation to achieve revenues of approximately R$ 70 million in 2011. Present in the market for over one hundred years, CESTARI is one of the largest players in the Brazilian gearboxes and gear motors market and it is headquartered in Monte Alto, State of São Paulo, with vertically integrated production capabilities including iron, bronze and aluminum casting facilities and state-of-the-art machining centers.

4-Axis Cnc Sharpener Restores Drill Bits Inexpensively (18/11/2011 17:08:54)

The US manufacturer, Darex, has introduced a new, 4-axis CNC drill sharpener, designated XPS-16, capable of restoring high-performance drills in a simple, one-touch operation. Distributed in the UK by 1st MTA, Salisbury, the heavy duty unit costs the equivalent of 100 radial split point carbide drills, yet even unskilled operators can sharpen more than 400 of them in a day. Return on investment is typically under eight months.

Valve Components Cleaned Efficiently and Cost Effectively (18/11/2011 12:41:36)

At the Poole factory of Thompson Valves Ltd has been replaced by a batch cleaning machine that is proving much more versatile in operation. Called Elba, the aqueous machine is supplied in the UK by Turbex. The superseded washing, rinsing and drying line, which was also water-based, processed components on a continuous belt and did not have the ability to rotate the parts. As a result, there was a risk of water being retained within the valve bodies and other components, causing staining and also oxidation while they were in storage. Other problems of the older system were its large footprint and difficulty in obtaining spares.

Transonics new warehouse and logistics centre doubles component distribution capacity - 100M components in stock across 13,000 product lines (17/11/2011 16:31:49)

Transonics plc. the London based leading supplier of electronic components and logistics solutions, have been distributing electronic components for over 35 years. Providing value added services including customised design solutions, dedicated buffer stocks, consignment stocking, Kanban, order scheduling, device programming, laser oblation and technical support Transonics offers its customers far more than the conventional broad line distributors".

Safe Hydrocarbon Gas Detector for Oil & Gas Companies (17/11/2011 14:55:59)

Available from FLIR Advanced Thermal Solutions - the FLIR GF320 is an optical gas imaging camera designed to help the oil and gas industry better control hydrocarbon emissions thereby preserving the environment, improving operational safety and minimising revenue loss.

Altair Appoints Miles Mahoney as President of Its HiQube Business Intelligence Software Division (17/11/2011 14:53:06)

Altair Engineering has announced the appointment of Miles Mahoney as president of its HiQube business intelligence software division. Mahoney, whose nearly 20 years of experience includes officer-level positions with Crystal Decisions, Business Objects and SAS, will be responsible for setting the vision and strategy to grow HiQube's business globally, with an emphasis on alliances with system integrators, OEM partners and value-added resellers.

New Product/Design Engineering/OEM Manufacturing (17/11/2011 14:50:33)

Steinmeyer, Inc. offers custom motion systems for the life sciences market. Typical applications include cell inspection, resonance scanners, computer tomography and precision dispensing systems. These high precision systems are specifically designed to fit customer requirements for accuracy, repeatability, environment, load capacity and space constraints. By offering cost effective custom solutions, Steinmeyer is able to provide exactly what customers require and desire versus something close that may be in a catalog.

WEG Acquires the European Company Watt Drive (17/11/2011 14:38:07)

Watt Drive acquisition enhances product portfolio and reinforces WEG's presence in power transmition WEG announced on 8th November 2011 the acquisition of Watt Drive Antriebstechnik GmbH ("Watt Drive"), an Austrian corporation that designs and manufactures gearboxes, gear motors, drives and control systems.

Enclosures DNV approved for marine and offshore applications (17/11/2011 14:35:26)

Enclosures aboard ships or mounted in offshore installations can face extreme environmental conditions including high temperature, high humidity, shock, vibration, and exposure to corrosive seawater. CEE Norm announces an extension to the Hensel range of Enycase enclosures, with DK cable junction boxes now DNV approved for marine and offshore applications.

Hydraulic Tipping Cylinders Will Last the Life of the Vehicle, if Properly Maintained…. says Peter Smith of Edbro PLC (17/11/2011 14:32:05)

Hydraulic tipping cylinders are fundamental components to the safe and reliable operation of rigid trucks and trailers. Properly maintained, they will last the life of the vehicle. Unfortunately, maintenance is all too often overlooked, and cylinders suffer abuse in key areas, which can affect both their safety in operation and also their reliability. The core problem seems to be one of time constraints: pressurised schedules that prevent operators taking vehicles out of service even for a few hours, to perform routine maintenance. One can understand this reticence, with a truck inoperative for a day costing around £400. However, on the other side of the equation, there is the fact that, if a truck is taken out of service for preventative maintenance, then the maintenance is scheduled; the operator is in control and can determine the most opportune time for the work to be performed. The alternative could be a breakdown at much higher cost.

Magma’s New SystemNav Speeds Board-Level Failure Analysis by Enabling Signal Trace between Chips, Stacked Dies, PCBs and MCMs (17/11/2011 14:28:38)

Magma Design Automation has announced SystemNav, a next-generation tool that extends CAD navigation and circuit debug from integrated circuits (ICs) to stacked die, printed circuit boards (PCBs) and multichip modules (MCMs). SystemNav is the only commercially available tool that integrates multiple, interactive IC and PCB online trace and circuit debugging with CAD navigation. SystemNav allows rapid signal traces on chips, stacked dies and MCMs and PCBs. With SystemNav, fab teams can trace signals from chip to board, back to chip and then quickly navigate failure analysis tools to X, Y locations to determine the root cause of the fault.

Highly Versatile Positioning & Measuring Indicator For Linear And Rotary Applications (17/11/2011 14:21:12)

The new Linear Measuring Indicator from HepcoMotion is more than just a precise length measuring system. This easy-to-install, compact product can also be adapted for rotary applications where angular measurement is required. Highly versatile and therefore economical, LMI offers repeatable, precise measurement to improve productivity and reduce rejects in many industrial applications.

Membrane Dryers Set Highest Standards For Compressed Air Systems (17/11/2011 14:17:24)

The new range of Hi-DRI compressed air membrane dryers from Hi-line Industries have been re-engineered to be technologically superior products, achieving new standards for reliability, performance and energy efficiency. They feature a patented arrangement of structurally packed, permeable hollow fibres spirally wound on a support core. This creates an optimised design combining efficient air flow with high contact areas to maximise the drying performance within a compact unit size. These products are ideal for in-line installation to ensure the delivery of dry compressed air at the point of use. This ensures maximum effectiveness with virtually any dewpoint or degree of drying being achievable.

NSK Achieves Ten-Times Bearing Life & Annual Savings On Bearing Costs Of €2,970 For Major Quarry/mining Operator. (17/11/2011 14:10:24)

NSK's Asset Improvement Programme (AIP) has achieved 10- times bearing life and saved €2,970 annually on downtime and maintenance costs for a major company in the Quarrying & Mining industry that was experiencing frequent reliability problems with casting units assembled into a vibrating drum. The reliability problems were resulting in bearing failures every 2-months, or 440 hours of operation. They were caused by the severe environment in which the casting unit support bearings operated. The environment was wet and mechanically demanding. Worse still, the bearings were often exposed to large amounts of sand, which often covered them completely resulting in harsh abrasive ingress, and subsequent premature failure.

Having delivery problems getting linear guides? – Contact us for 1 to 2 weeks lead-time! (17/11/2011 14:08:20)

You might find your current supplier is taking up to 6 months to supply, or even longer. The Thomson 400 series profile rail linear guides from Micromech can in some cases be supplied in as little as 1 to 2 weeks. The 400 Series is a cost effective, transport grade Profile Rail solution for cost-sensitive applications and is designed as a drop-in replacement with industry-standard envelope and hole patterns.

Low Cost & All-in Functionality of Movicon 11 SCADA Proving a Hit with UK Systems Integrators (17/11/2011 14:03:26)

The people who really know about SCADA systems, the Systems Integrators who develop and install them, are warmly welcoming the launch of Progea Movicon 11 SCADA onto the UK market. "We already have a number of top system integrators using Movicon SCADA, after only a few months of offering the package in the UK," commented Paul Hurst, MD of P4A, the UK agent for package. "The positive comments that we are receiving centre overwhelming on the comprehensive nature of the package, with all major functionality built in – and no expensive cost add-ons. System Integrators are finding that the Movicon 11 package is costing on average 30% to 50% less than equivalent systems from competitive suppliers, with no sacrifice in functionality. The fact that there are no development fees with Movicon is also winning business for SI in what is a very competitive market."

Manufacturers may be missing out on Austempering and Martempering (14/11/2011 16:07:04)

Commonly defined as the controlled heating and cooling of metals to change their microstructure and mechanical characteristics, such as hardness, ductility, tensile strength and impact resistance, heat treatment is a core phase in many manufacturing processes. It enables engineers to vary the properties of a given material to optimise its design performance and ensure consistent, reliable results. In this country, the top heat treatment technologies tend to be standard hardening, tempering, carburising, induction hardening and annealing processes, whereas in the States, where the industry is valued in excess of $20 billion, isothermal treatments like Austempering and, to a lesser extent, Martempering are much higher on the agenda. So are British design engineers and manufacturers losing out by not embracing these technologies?

Mentor Graphics Announces Further Capital Tool Expansion with New Product that Cuts Wire Harness Manufacturing Costs (14/11/2011 15:10:37)

Mentor Graphics Corporation announced availability of Capital Harness MPMa software application that helps wire harness manufacturers cut production costs. Addressing manufacturing process management, Capital Harness MPM systematically models harness designs against production capabilities to create structured bill-of-materials data. This data is typically used to drive enterprise resource management (ERP) systems. Capital Harness MPM is part of the Capital® tool suite, a powerful electrical system and wire harness design environment for the automotive, aerospace and defense industries. The new tool delivers important additional production engineering capability to Capital's Define-Design-Build-Service flow.

Count On Tools Inc. Improves Revolutionary StripFeeder Trays (14/11/2011 14:23:31)

Count On Tools announces improvements to its revolutionary StripFeeder Trays for loading tape-and-reel components onto compact modules for prototyping and high-mix low-volume applications. The newly redesigned StripFeeder Trays now feature reusable adhesive layers on the tracks to securely hold down tape-and-reel during the assembly process. This prevents components from being disturbed by the pick-and-place action of the equipment and provides a nonviolent system for fragile components or loose packaging. In-house testing proved that the adhesive is effective even after hundreds of installations with the tape-and-reel components. Also, the adhesive can be removed and replaced after it is worn out.

Thermal Energy International’S Gem Traps Provide 9.4% Energy Savings At Servizi Ospedalieri, Italy (14/11/2011 14:16:16)

Servizi Ospedalieri, is fulfilling its environmental pledge of reducing energy usage by installing the award winning GEM venturi orifice traps from Thermal Energy International. Trialled through Thermal Energy International's Italian agent, Nuova Folati, at Servizi Ospedalieri's plant in Porto Garibaldi, the laundry's independent, technical assessors, IMAT S.r.l. of Rome, was able to verify that GEM steam traps have provided close to a 10% saving in energy consumption compared to newly installed mechanical traps.

shentongroup’s GENERATORS FOR ‘LIFE SAFE’ APPLICATIONS (14/11/2011 14:10:39)

Power support company, shentongroup, has launched a range of standby diesel generators and associated control systems that meets the life safety requirements of BS EN8519: 2010. Called PhoenixPower, generators are available in sizes from 20kVA to 800kVA and have been specifically developed to provide secondary power for 'Life Safety' and fire-fighting systems.

FDB Addresses Plan Filing Systems (14/11/2011 13:54:26)

Despite the overarching presence of computer storage there is still a powerful need for hard copy plan drawings. As recognised by the people at FDB Panel Fittings, storage and easy visibility of flat plans in A2, A1 and A0 sizes can be a significant problem - a problem however readily addressed by the new offerings from FDB of the PRO Plan Filing System single end mounted pockets and the ECO system double end mounted units.

Electrox Opens US Applications and Demonstration Center and Makes Senior Appointment (14/11/2011 11:11:36)

Electrox has opened a new applications and demonstration center and made a senior appointment in the US reinforcing its commitment to its customer base and strengthening its market position in the country. The company has opened its new applications and demonstration center in Burlington, Massachusetts and has appointed Owen Jones as regional manager for the north eastern region.

Haydon Kerk Motion Solutions Introduces PCM7539X IDEA Drive Stepper Motor Controller (14/11/2011 11:04:03)

Haydon Kerk Motion Solutions has introduced the Haydon™ RoHS compliant PCM7539X IDEA programmable stepper motor drive capable of a 75VDC input voltage and a max output current of 3.85A RMS. This unit is designed to control the larger-size stepper motor linear actuators offered by Haydon Kerk and has the same functionality and programmability as the lower- power IDEA drives. The introduction of the PCM7539X completes the power range for the platform and allows the popular IDEA system to be used with any stepper motor product currently offered by Haydon Kerk Motion Solutions. The PCM7539X in particular is designed to control the larger size 23 and size 34 stepper motor units.

New 3-Axis Machining Centre For Mouldmakers (14/11/2011 10:57:17)

A new, 3-axis, vertical-spindle machining centre has been introduced by Okuma for tool and mould makers that require repeatable accuracy down to microns. Availability in the UK is through sole agent, NCMT. Having a compact footprint (2.281 x 2.736 m), the 7-tonne MP-46 V supports workpieces on a 760 mm x 460 mm table and has linear travels of X 660 mm, Y 460 mm and Z 360 mm, with 24 m/min rapid traverse in each.

Landia’s digester mixing system advances biogas production at Bakenhus (14/11/2011 10:53:31)

Landia's digester mixing system, which combines sludge recirculation with gas injection, has helped a thriving business in northern Germany increase its biogas methane content by 6%. Heinz Bakenhus' biogas plant in Grossenkneten utilises Landia's equipment for its primary and secondary tanks to mix and accelerate the gas production of a feedstock that combines maize, grass silage, chicken manure, grain and pig slurry.

Electrolube Distributes Knowledge at a European Conference (14/11/2011 10:46:22)

Distributors from across Europe converged at Electrolube's headquarters in the UK to get a roadmap on the forthcoming year and learn about innovative new products launching for the first time at Productronica this month. Leading global electro-chemical manufacturer, Electrolube welcomed 29 delegates from countries including Ukraine, Spain, Italy, Finland, Germany and France to find out about the exciting developments the company has in the pipeline and learn more about the products through technical discussions and presentations.

Heavy Duty Turn-Mill Centre For Components Up To Three Metres Long (14/11/2011 10:39:41)

A large turn-mill centre has been introduced by DMG for machining components up to three metres in length and 700 mm in diameter. Built by Gildemeister Drehmaschinen GmbH, the CTX gamma 3000 TC is equipped with a powerful ± 120 degree B-axis for flexible turning operations and milling in up to five axes simultaneously.

Pump-motor system gives a smooth delivery and extended life (11/11/2011 16:26:04)

Smoothly handling fluids in the most demanding applications with operational flexibility and long life, Fluid-o-Tech MGFR Series pump-motor units from Becktech combine 24V brushless DC drive motors in a rotor-less configuration with high precision mag drive external MG series gear pumps to provide a high-end system with special benefits in a wide range of uses.

Establish a link to China with CC-Link at the SPS/IPC/DRIVES fair and take home an iPad (11/11/2011 16:22:08)

Potential suppliers wanting efficient access to the accelerating Chinese automation market may also win themselves an iPad ahead of Christmas, by visiting the CLPA (CC-Link Partner Association) in Booth 6-136 at SPS/IPC/DRIVES. This fair is Europe's leading exhibition for industrial automation and runs in Nuremberg 22 - 24 November 2011.

Frost Thermostat Protection of Water Pipes (11/11/2011 16:10:21)

As winters in the UK become more extreme, the freezing of water and boiler condensate pipes becomes a major problem. Just when you most need it, the boiler stops working due to the boiler condensate freezing in the outlet pipe. Also water pipes (especially in insulated loft-spaces or garages) can freeze causing untold damage if the pipes spilt. These issues can be permanently solved using a suitable trace heater assembly fitted with an integral and very reliable "MQT" frost thermostat.

Video of the Week – igus QuickPin 2.0 makes Cable Design Simple (11/11/2011 15:10:55)

Cable and energy chain specialist igus UK has teamed up with ePLAN, the total engineering solutions software provider, to develop QuickPin 2.0, an easy online configuration tool. Using the intelligent ePLAN P8 platform, QuickPin 2.0 makes the selection of chainflex cable and connectors very quick and easy.

Eland Cables are happy to announce the addition of Firecel Fire Performance Cables to their electrical cable range. (11/11/2011 15:07:36)

Firecel SR 114H Standard Cable, and Firecel SR 114E Enhanced Cable are suitable for use in fire detection systems, alarms, and emergency lighting circuits. Firecel 114H Standard is tested to comply with BS EN 50200, and to retain circuit integrity for 30 mins (PH30) and 60 mins (PH60) for 1.5mm² and larger. Firecel 114H is also tested to pass BS EN 50200 Annex E for 30 mins. Firecel 114E Enhanced is constructed in order to survive over 120 minutes (PH120) as well as meeting the requirements for BS. Both Firecel 114H and 114E conform to BS 7629-1:2008 and BS 5839-1:2002, and are LPCB Approved.

Lots of Latches Spring From EMKA (11/11/2011 15:04:27)

The humble and ubiquitous toggle latch comes today from EMKA in a multitude of variations under their 6000 program which includes many types in stainless steel. Toggle latches with their associated catch plates find application in situations where rapid fixing and release are required. This is often called for on packing cases, storage boxes, transit cases, access panels, cabinet doors, vehicle onboard storage compartments and similar.

Cambridge Wireless creates a focal point for wireless companies at NEW:UK 2012 (11/11/2011 15:01:42)

Cambridge Wireless has joined forces with National Electronics Week in order to promote wireless technology at the NEC Birmingham 18-19 April 2012. Cambridge Wireless, a vibrant membership organisation with over 300 members, is working with the event organisers of NEW to create a wireless showcase at the 2012 show. The aim is to collaborate with companies from across the sector to establish a focal point for visitors interested in wireless technology.

Molex First-to-Market with Sealed Mizu-P25 Miniature Waterproof Connector (11/11/2011 12:49:28)

Molex Incorporated recently announced the availability of Mizu-P25 Miniature Waterproof Connectors. The space-saving 2.50mm (.098") pitch Mizu-P25 connector is the first and only sealed wire-to-wire system of its size in the market certified to the IP67 standard to help ensure the highest levels of protection. Mizu-P25 connectors are available in a low-voltage version rated up to 125 volts and a high-voltage version rated up to 250 volts.

IDC’S Low Cost Wireless Bar Code Solution For Conveyor Control Cuts Maintenance Costs & Boosts Operating Flexibility (11/11/2011 10:46:36)

IDC's low power ZigBee wireless technology is providing a simple, low cost solution for reducing maintenance costs and improving operating flexibility in plants with large conveyor control schemes, where a central PLC controls a line of several conveyors in sequence. With these multiple systems it is often a problem to run a single conveyor drive motor independently for maintenance purposes, such as tensioning the conveyor belt. However, with IDC's new ZB111 bar code reader, with integrated keypad and screen, independent running of individual conveyors can be achieved simply and quickly with high levels of safety compliance.

Tsubaki Leads the Lube-Free Market with Lambda Chain (11/11/2011 10:31:20)

For many years conventional oil based lubricants have been an issue when externally applied to chain drives in a wide range of industries and application environments. With demands for increased cleanliness spreading to industries such as paper, packaging and electronics, chains that require no additional lubrication are becoming ever more popular. Tsubaki Lambda drive chain uses internal lubrication to reduce the likelihood of wear in key components without risking contamination to the conveyed product or surrounding machinery area.

Healthcare Carton Code Inspection System From Olmec-UK (10/11/2011 16:20:54)

Olmec-UK, has successfully implemented a custom designed high speed in-line code reading system to meet the track and trace code reading requirements for CIP13, now mandatory in France. The system, fully integrated into the control system at a leading healthcare manufacturer, provides 100% reading and verification of codes on cartons and is capable of read rates up to 1200 cartons/min.

Intertronics Achieves Accolade As Dymax Top European Distributor (10/11/2011 16:14:18)

Intertronics have again scooped the prestigious DYMAX award for top European Distributor at a ceremony earlier this week. The award took into account overall sales revenues for DYMAX UV/light curable adhesives, coatings and sealants and UV light curing equipment – marketed widely to manufacturing industries including the specialist electronics and medical sectors.

Edbro Continues Polish Growth with the Opening of New Warehouse (10/11/2011 16:05:43)

Edbro Poland has continued to grow its presence in the market with the opening of a new warehouse located in the centre of the country. Following on from the successful launch last year of a national service centre network, this is the next step for the company in developing its delivery and service capabilities in country and throughout Eastern Europe.

Fluke offers free IR/contact thermometer with a 3-phase power logger (10/11/2011 15:58:20)

Fluke is offering a new 1735-IR Kit in the UK. The kit contains a rugged Fluke 1735 three-phase portable Power Logger, designed for commercial electricians and industrial maintenance engineers, plus a Fluke 561 Infrared (IR) Thermometer which can be used to check for overheating cable connections at a safe distance. The power logger can be installed in seconds and is easily downloadable in the field. The kit is priced such that the Fluke 561 is effectively free.

New high power field controller from Sprint Electric (10/11/2011 15:55:22)

Sprint Electric has added 3 phase field controllers to the product range of DC drives for control of high current excitation fields on DC motors. The new product with the brand name QLX will be introduced in November at SPS/IPC/Drives, the international trade fair for electric automation, systems and components, in Nuremberg, Germany.

New Portable Welding Fume And Dust Extraction Unit From Weldability-Sif (10/11/2011 15:52:08)

Weldability-SIF, has launched the 'ProtectoVac' – a modern, lightweight and stylish portable fume extraction unit to extract and filter welding fumes and metallic particles at up to 230m3/hr with a 99.9% filter efficiency.

Fire-Lite Alarms Simplifies Fire Alarm Programming, Maintenance (10/11/2011 15:39:41)

Fire-Lite Alarms by Honeywell announces an upgraded time-saving software tool designed to simplify fire alarm system installs and service while building a database of information on each installation. The PS-TOOLS program assists users in system configuration, including component selection and panel programming in addition to helping with remote diagnostics. It can be used with nearly every Fire-Lite Alarms' addressable and conventional control panel on the market today. The software and user instructions can be downloaded free-of-charge from www.firelite.com. Users can also register online to receive software update notices via email.

Eco-Pen 450 Extends The Capability Of Volumetric Dispensing (10/11/2011 13:14:22)

Intertronics' introduction of the preeflow eco-PEN 450 from ViscoTec not only offers a greater capacity for high accuracy and highly repeatable volumetric dispensing – it also addresses the needs of a wide range of low to medium viscosity applications. These include oils and fats, colour mixes, silicones, sealing compounds, adhesives and even abrasive media, which can be easily handled by the innovative precision rotor-stator mechanism referred to as an "endless piston" by manufacturers ViscoTec.

New Range Of Fume Extraction Cabinets From Flextraction (10/11/2011 13:11:15)

Flextraction Ltd has launched a brand new range of Fume Extraction Cabinets (FEC) for use by companies, where operatives are exposed to low dust emissions and small quantities of solvents, paints and chemicals used in their product manufacturing processes. They can also be used to perform weighing operations.

Detecting metal particles in lubricating oils (10/11/2011 13:06:59)

The AMOT Metal Particle Detector (MPD) alerts operators to perform oil condition checks to determine machinery health status. It is an on-line continuous wear debris monitor that signals the presence of metal particles in lubricating oils. Timely detection of metal particles ensures reliable machine conditions and maximises asset availability by avoiding unnecessary downtime.

Wear Protection Delivers Maximum Roi For Coal Bulk Handling Vessels, Extending Discharge Plant Life & Increasing Throughput (10/11/2011 12:49:28)

Despite the reduction in its use in western countries, coal is still a major fuel worldwide, accounting, together with iron ore, for the majority of ocean-going bulk freight. This global trade poses a major challenge to shippers in handling the various sizes, types and blends of coal, and also in coping with the abrasive characteristics of the fossil fuel. The problem is that coal is high in silica, a mineral that causes erosion and wear, in the plant and equipment used to process it. In the pressurised world of bulk carriers, where coal is handled in quantities of millions- of- tonnes per year, the ramifications of this problem can be very serious, resulting in extended ship layovers if not addressed. Consequently, it makes economic sense to take appropriate measures to protect against the sliding friction and impacts that cause wear.

New Emergency Device For Safe Load Lowering In The Event Of Mains Power Loss (10/11/2011 12:40:50)

As part of an ongoing safety evaluation for all their products, J D Neuhaus have introduced an emergency lowering device for their EH range of air operated monorail hoists. With this feature JDN complies with the leading standards like NORSOK, specifying an emergency device for the safe lowering of loads in the event of a cut in the main power supply. This new device supplements an existing fail-safe disc brake, which is activated in the immediate event of a mains power failure, ensuring that suspended loads are held safely and securely at their above-floor level until mains power is again made available.

Nsk’S Free Pocket- Sized Publication Is Perfect Designers Guide To Best In Linear Motion Equipment (10/11/2011 12:22:22)

NSK has published a free, pocket- sized guide detailing its market-leading range of linear motion equipment, which is one the most comprehensive and innovative in the world, encompassing everything from linear guides to high technology, Megatorque motors for precision direct drive applications. Divided into six easy- to- read sections, and extending to 85 pages, the pocket guide provides the most concise and comprehensive guide to NSK's linear motion products. Ideal for use by design engineers, the pocket guide is a mine of useful information, providing general data on equipment types, and easy- to- assimilate graphics that enable engineers to assess the benefits of, for example, groove configurations on linear guides for load carrying capacity and impact loads.

Tektronix Communications RAN Performance Optimization Solution Available on Industry-Leading GeoProbe System (10/11/2011 12:20:17)

Tektronix Communications has announced the availability of an integrated solution for the industry-leading GeoProbe system. OptiMon for GeoProbe allows customers to leverage their investment with the fully scalable, 24/7 real-time network-wide monitoring platform based on GeoProbe with a state-of-the-art 3G RAN performance optimization solution provided by OptiMon. This combined integrated solution allows service providers to improve subscriber accessibility, retainability and performance of their mobile networks.

Fisker Automotive Eco-Luxury Car Maker Achieves Electric Success With Dassault Systèmes PLM Solutions (10/11/2011 11:46:27)

Dassault Systèmes has announced that premium green automobile manufacturer Fisker Automotive has relied upon CATIA for virtual design and ENOVIA for product data management and collaboration in the development of its Karma and Surf models. Recognized as the leading automotive industry design solution, the integrated capabilities of CATIA enabled Fisker to work from a single architecture for everything from wire harness design through Class A surfacing, while ENOVIA managed the design data across multiple global locations. Fisker also employs Dassault Systèmes' 3DVIA and SIMULIA solutions in its product development processes.

Ethernet-Based Akd Servo Drives Deliver Highest Performance Across Widest Power Range, With Gui & Plug & Play Flexibility (10/11/2011 11:38:34)

Inmoco, is extending its range of motion control products by offering Kollmorgen's newly released Ethernet-based AKD digital servo drive. The AKD offers industry-leading flexibility –including plug-and-play motor set-up, scalability, communications and power range to meet the unique performance requirements of almost any application; from basic torque and velocity applications, to indexing, to multi-axis programmable motion. This enables machine builders to standardise on a single drive family with a common Graphical User Interface (GUI) across a wide power range (0.5 kW to 64kW), minimising engineering time and set-up and installation costs.

Corrosion Resistant Fork Rod Ends From Elesa (10/11/2011 11:24:18)

Fork rod ends from the Elesa FJT series are a proven method of transmitting linear control or actuation, such as pneumatic cylinders, and in the case of the FJT they are resistant to continuous washing cycles with solvents and detergents, so they are suited for example, to applications in food and pharmaceutical processing equipment.

CAS Selects Lantronix’ MatchPort b/g to Enable Wireless Connectivity for Scales and Weighing Equipment (09/11/2011 11:30:09)

Lantronix has announced that CAS Corporation has selected MatchPort b/g for its CL5000 series product. A secure, embedded 802.11 b/g networking module, MatchPort b/g is a reliable networking solution for data sensitive, regulatory and IT-driven applications.

Ensure Compliance With PPG26 Pollution Prevention Guidelines (07/11/2011 14:58:52)

Fentex Ltd have consolidated their spill trays and absorption materials providing a range of products to achieve compliance with the national Pollution Prevention Guidelines (PPG26). Spill trays can be supplied for use with single or multiple primary containers of 1, 5, 20 and 25 litres capacity together with drums up to 205 litres. These provide the necessary secondary containment facilities during the storage or decanting of liquids, ensuring that drips, leaks and accidental spills can be successfully contained.

Laser-Sintered Titanium Parts Boost Race Car's Performance (07/11/2011 14:03:40)

A novel, active suspension system helped Coventry University's Phoenix Racing team to win the Shell-sponsored award for most fuel-efficient car in the premier class of this year's Formula Student championship. Key components of the system, which were both compact and lightweight, were produced layer-by-layer from titanium alloy powder (Ti64) in EOS laser-sintering machines.

Robust Actuators Designed For Optimal Performance In Entry Door Applications (07/11/2011 13:59:34)

The Southco AC-30 and AC-40 actuators are the first actuators from Southco suitable for entry door solutions and harsh environments. Constructed of corrosion-resistant materials, the actuators are designed for applications in the off-highway, marine and transportation industries.

Excellent Drainage Properties of SN100C Confirmed in “Icicle” Test (07/11/2011 13:43:38)

Nihon Superior is proposing that its "Icicle Test" is one of the criteria electronics manufacturers should consider using as they struggle to find a basis for choosing between the various lead-free solders being offered for wave soldering.

Advanced New Smart Camera For Industrial Inspection Applications (07/11/2011 12:40:20)

STEMMER IMAGING can now offer the BOA Pro smart camera from Teledyne DALSA. This new camera combines the robustness of the BOA hardware with the flexibility of the Sherlock inspection software to provide an extraordinarily versatile industrial vision solution for a host of applications. Key to the BOA Pro performance is the versatility of the Sherlock software, which offers machine vision system professionals extensive tools and capabilities for design, development, debugging, and user administration. Sherlock's extensive library of instructions, preprocessors and advanced algorithms can be combined in a variety of ways to solve simple or very demanding tasks. Maximum design flexibility is provided to allow users to customize algorithms, construct scripts and develop operator interfaces that best suit their factory environment.

New Sliding Head Lathe With B-Axis (07/11/2011 12:14:26)

Traub, launched a new version of its 20 mm capacity sliding/fixed-headstock TNL18 lathe, with the addition of a 100-degree pivoting B-axis on the upper turret. The machine is available in the UK through sole agent, Geo Kingsbury Machine Tools. The machine is intended for the production of highly complex parts, particularly those needing angular milling and drilling operations, which no longer require the use of expensive and often inaccurate angled driven toolholders.

LPRS announces two key appointments to support continued sales growth (07/11/2011 12:10:24)

LPRS announces the appointment of Sandie Sharples to the board of directors to take on the role of Client Services Director. This new position reflects the great importance LPRS puts on customer service, from design to delivery and beyond. Sandie comments: "Our customer surveys show that it is our service that really sets us apart from our competitors. We can assist our customers with design, implementation and manufacturing and like to be full partners in every project we undertake." Sandie will manage key accounts and oversee the recruitment of additional distributors worldwide to further grow sales of their UK designed and manufactured market leading eRA wireless communication modules.

iQ Works provides universal tool for system development (07/11/2011 12:05:30)

Mitsubishi Electric has launched the MELSOFT iQ Works integrated engineering suite to provide a unified engineering environment for all automation system development and maintenance. iQ Works provides a universal tool for PLC, HMI, drives, servo, motion, robotics and CNC programming, providing an application focus where users can develop and maintain complete production lines from a single location.

Trio ARMS new Motion Coordinator (07/11/2011 12:01:43)

Trio Motion has expanded its Motion Coordinator range with two new motion and machine controllers based on the latest 533MHz ARM11 processor - flexibly and economically providing new levels of multi-tasking servo or stepper control for high performance automation. The MC403 will control two servo axes with a master encoder input, or three stepper axes; whilst the MC405 has a choice of four servos plus a master encoder or five step and direction axes. The 6MHz servo encoder ports are selectable for incremental linear or rotary feedback or may be configured for SSI, Tamagawa and EnDat absolute types. The maximum stepper output frequency is 2MHz. Any combination of servo and stepper axes is possible.

Irish Manufacturer Expands High-speed Machining With 5-axis Acquisitions (07/11/2011 11:51:41)

As far back as 1998, Smithstown Light Engineering in Shannon, Co Clare, was in the vanguard of high-speed metalcutting, having installed the 12th machining centre ever built by the German firm, Roeders. The 3-axis, vertical-spindle machine has been in continual operation ever since and its 44,000 rpm spindle is still the fastest in the Irish manufacturer's factory.

Material Optimisation In Production Sawing (07/11/2011 11:49:07)

German sawing machine manufacturer, Kasto, has introduced a new optimisation capability in the CNC systems controlling its bandsaws, circular saws and automated storage systems. The software automatically minimises the number and length of bar remnants after a production run, even when both straight and mitre cuts are involved.

Wastewater treatment down-time 'not acceptable' (07/11/2011 11:45:30)

Reliable 24/7 monitoring and control of a pharmaceutical company's wastewater facility is fundamentally important to the successful operation of the entire business. This is because failures or down-time in the wastewater treatment process would quickly result in waste stream back up. It follows therefore that monitoring equipment should be extremely reliable and this is why Shasun Pharma Solutions employs HACH LANGE monitoring equipment at many locations around their manufacturing facility just north of Newcastle upon Tyne.

Rohde & Schwarz UK supplies vector network analysers for revolutionary breast cancer screening research (03/11/2011 17:16:03)

Rohde & Schwarz has supplied high speed vector network analysers to Bristol University spin-out Micrima for the clinical trials of their revolutionary breast cancer screening technique. MARIA (Multistatic Array processing for Radiowave Image Acquisition) is an ultra wideband radio system that can be used to detect tumours by generating high-resolution 3D images of the human breast. The technique which avoids exposing women to X-ray radiation, is fast and inexpensive. It is also expected to be better at identifying breast cancer in younger women.

Laidler And TÜV SÜD Sponsor Demonstration Zone At Health & Safety Ireland (03/11/2011 16:47:31)

Laidler Associate will be sponsoring the Demonstration Zone at the inaugural Health and Safety Ireland event which takes place at The National Show Centre, Dublin on the 16-17 November 2011. Laidler, who specialises in machinery safety legislation and risk assessments, will also deliver a presentation at Health and Safety Ireland on Practical Machinery Safety, including Guarding Issues. Using its virtual reality system to re-create a typical working environment, Laidler is able to bring to life the problems that are present and demonstrate how to provide safe solutions in this area. Focusing on the practical nature of the zone, Laidler will demonstrate how to carry out machinery risk assessments in line with relevant legislation.

Chains for agricultural machinery from iwis (03/11/2011 16:22:05)

iwis presents its comprehensive range of chains for agricultural machinery at this year's Agritechnica in Hannover, Germany. Iwis' agricultural chain range includes intake chains and grain elevator chains for combine harvesters, cutting chains with attachments for corn and maize headers as well as a broad range of attachments for a wide variety of applications. iwis also offers chain sprockets, belt pulleys, roller and flyer chains as well as complete kits for agricultural machinery. iwis agricultural chains are exceptionally reliable under extreme environmental conditions, while flexible production and stock-keeping strategies ensure rapid spares delivery during critical production and maintenance periods throughout the harvest season.

Molex to Demonstrate Convergence of Power and Signals at SPS/IPC/DRIVES 2011 (03/11/2011 15:57:11)

When the industrial control and automation market get together in Nuremberg at this year's SPS/IPC/DRIVES exhibition, Molex Incorporated (Hall 10, Stand 110) will showcase its latest advancements towards convergence of power and signals.

Atlas Copco compressor helps Celotex save energy, improve air quality and achieve ISO 14001 accreditation (03/11/2011 15:45:49)

In a bid to meet production demands for improvements in energy efficiency and air quality, insulation board manufacturer Celotex has replaced its existing compressor installation with an Atlas Copco full-feature, variable speed drive, oil-free compressor together with a heat regenerative IMD dryer. The result is reduced energy consumption and improved air supply quality within the manufacturing plant. The positive environmental impact of the new installation has also been a contributory factor in gaining the company its ISO 14001 accreditation.

TDK-Lambda introduces the Z+ Series Programmable DC Power Supplies (03/11/2011 15:42:13)

TDK-Lambda UK introduces the Z+ Series of programmable DC power supplies. Offering high efficiency, flexibility and reliability, these high-density, 2U format benchtop and rack mounted power supplies are designed to meet the demands of a wide variety of ATE and OEM applications, such as Test & Measurement, Semiconductor Burn-in, Component Test, Laser Diode, Heater Supplies, RF Amplifiers and Electromagnets.

Kemppi Supersnakes Weld Their Way Through Aircraft Carrier's Flight Deck (03/11/2011 15:32:27)

Established in 1824, Cammell Laird Shiprepairers and Shipbuilders Ltd, Birkenhead, has a long and proud history on the banks of the River Mersey including the building of RMS Mauretania in 1938 and HMS Ark Royal in 1936, an aircraft carrier of World War Two fame. As one walks through the gates to-day, the yard and shipbuilding has changed considerably but you still get a feel for its history and a huge abundance of new enthusiasm and pride from the top to the bottom. The yard specialises in commercial repair, conversion, heavy fabrication and military refit projects, then in 2010 shipbuilding returned, when Cammell Laird received a £44m contract to build two 12m. high sections of the middle and aft flight deck for HMS Queen Elizabeth, the new 65,000 tonnes aircraft carrier being built by the Aircraft Carrier Alliance for the Royal Navy.

High Accuracy Pressure Calibrators With Intrinsically Safe Rating And LCD Backlighting (03/11/2011 12:51:49)

Two intrinsically safe pressure calibrators for use in hazardous oil, gas, petrochemical and many other applications have been introduced by AMETEK Test & Calibration Instruments. The dual-sensor JOFRA HPC552 Ex handles two pressure ranges in a single unit to reduce cost and simplify use. Both the dual-sensor and the single-sensor Model HPC550 Ex include LCD backlighting for enhanced visibility in difficult operating conditions.

Analytical Technology is Awarded Prestigious Framework Agreement with Yorkshire Water (03/11/2011 12:45:53)

Specialist electrochemical sensor manufacturer Analytical Technology Inc. has announced that it has been awarded a framework agreement to supply and install bufferless chlorine monitoring systems to Yorkshire Water. An in-depth technical evaluation was carried out by Yorkshire Water, in which Analytical Technology's products were compared with a competitor's against benchmark buffered units. Following this extensive process, Analytical Technology secured the agreement and commenced an asset replacement scheme for over 450 chlorine monitors.

High Performance UV Curing Adhesives From Intertronics Aids Efficiency (03/11/2011 12:35:41)

Increasing production throughput of bonded plastic assemblies is high on the list of priorities these days for both design and production engineers judging from the experience of the adhesive specialists at Intertronics. In these situations Intertronics are delighted to offer the DYMAX Ultra Light-Weld® 3069 which is a UV/Visible light-curable adhesive designed for rapid bonding and laminating of a variety of plastic substrates. This high performance, solvent-free adhesive cures in seconds to enable faster processing, increased output and lower processing costs. It is specifically designed to bond to a variety of both rigid and flexible plastics including PVC, polycarbonate, polyurethane, PET, and PETG. An excellent choice for bonding dissimilar materials, DYMAX 3069 offers manufacturers significant flexibility advantages over other fastening methods such as welding, mechanical fasteners and traditional adhesives. Typical applications include flexible lamination, plastic housing assemb

New Marketing Manager Sees Bright Future (03/11/2011 12:19:38)

Amaechi Oduah has joined Mitsubishi Electric Automation Systems Division to head up its marketing and communications activities. He has over a decade's experience in the telecommunications, electrical and electronic manufacturing sector and gained his education at the University of Greenwich. He explains that moving into automation was a strategic decision, as manufacturing is set to be one of the best growth sectors in the medium and long term.

Let Spelsberg Thermostat solutions protect your pipes this winter… (03/11/2011 12:14:53)

Spelsberg thermostats can help to protect from frozen pipes during the heavy winter that has been predicted. In the last couple of weeks leading long range weather forecasters have warned that, once again, the UK is heading into a heavy winter. It is predicted that we will be subjected to sub-zero temperatures throughout November, December and January,in a winter that could prove even colder than the previous two. So while you're wrapping up warm remember to think of your critical pipes on site, which can easily become damaged due to freezing.

TRUMPower Medically Approved ATX PC Power Supply Leads with its High Output of 700W (03/11/2011 11:51:26)

Tumbler Technologies + TRUMPower introduces the TMPC-700, which is the first medically approved 700W ATX PC power supply available in its industry. The TMPC-700 is a unique higher DC power source that is an addition to the line-up of medical grade power supplies which the company has had on the market.

New machine filters out the problems (03/11/2011 11:48:26)

More success stories from the most diverse applications which partners Micromech Systems and Parker has been supporting for food processing equipment and packaging machinery manufacturers. Form, fill and seal machine for coffee pads. The strong demand for coffee pads required increased product output as these single portion sachets represent a convenient alternative to conventional filter coffee that have become very popular. As a result of this high demand from the market, coffee producers were on the lookout for even better machines with a much higher throughput. The production process is technically demanding, as the pads must be formed from a strip of fabric, precisely filled, sealed and punched out.

9 New 2-Finger Parallel Grippers from Techno-Omil Feature Heavy-Duty T-Slot Design (03/11/2011 11:42:09)

A new series of 2-finger parallel grippers from Techno-Omil feature heavy-duty T-slot design. Identified as the OPP2-.... Series, these 9 grippers feature a stroke range of from 12 mm to 72 mm and a gripping force of from 420 N to 8410 N. Their range of operating pressure is from 2 to 8 bar. The housings are made of high tensile hard-coated aluminum alloy, hard anodized, and are completely maintenance-free for the first 1.5 million cycles.

New portable FTIR Gas Analyser detects almost any gas (03/11/2011 11:28:57)

Instrumentation specialist Quantitech has launched a new version of the Gasmet portable multiparameter FTIR gas analyser which has brought laboratory grade gas analysis into the field. The new instrument, the DX4040, is lighter, easier to use and more flexible than its predecessor. However, Quantitech's Dr Andrew Hobson says: The most important development lies in the ability of the device to identify unknown gases in the field (at the touch of one button) when using a new version of the unit's Calcmet™ software on a Windows tablet pc.

Kitagawa's New Rotary Table Has Low Energy Consumption (03/11/2011 11:20:14)

A major advance in rotary table design was announced by Kitagawa at the recent EMO 2011 machine tool exhibition in Hannover. The Japanese manufacturer launched the first of a new generation of compact, low energy units that incorporate a high efficiency direct drive motor to achieve increased torque at lower power consumption.

Adaptable Compression Latches Suit Deep Doors - From EMKA (03/11/2011 11:16:13)

EMKA's 1000 Program of IP65 compression latches now encompasses a full range of lockable T handle, Wingknob, Square key and L handle variants, with shaft extensions to suit unusually deep door frames up to 95mm. They are expected to be especially useful in acoustic cabinets, genset installations, refrigeration, HVAC and on-board vehicle situations. This extensible shaft variant provides additional depth capability and also permits manual clamping adjustment by means of a threaded feature at the inner end. This enables the compression action to be fine tuned by adjusting the shaft mounted lock nut.

ESAB Publishes New Catalogue Of Ppe And Welding Accessories (03/11/2011 11:09:43)

ESAB has published a new catalogue, PPE and Welding Accessories, covering personal protective equipment (PPE), welding tools and accessories, and special process equipment. The 96-page, full-colour A4 brochure is available free of charge on request.

Wide Range of Waterproof Multi-Pin Circular Connectors from Intelliconnect (03/11/2011 11:01:13)

Intelliconnect (Europe) Ltd the UK based manufacturer of RF connectors announces the availability of a wide range of waterproof multi-pin circular connectors predominantly housed in traditional coaxial style casings including N Type, Nim-Camac, SMA, TNC and C Type.

Excelsys Xgen Configurable Power Supplies meet latest Medical Approvals (03/11/2011 10:54:32)

Excelsys Technologies has successfully had its Xgen range of configurable power supplies approved to IEC 60601-1:2005 3rd Edition. This is in addition to the existing approval to the 2nd Edition and ensures full medical approval is maintained during the transition period from 2nd to 3rd editions. Two 1U Excelsys Xgen platforms are available with the latest medical approvals. The Xmite offers output power over the range 200-750W and the Xvite provides 400-1450W output. Common specifications include leakage current <300uA, 4KV Isolation and efficiency up to 90%.

Nanometric Measuring Technology Finds New Applications (03/11/2011 10:21:31)

Surfaces that are nearly flat or spherical may be measured to nanometric accuracy using a device known as a swing-arm profilometer (SAP). There are only a handful of such machines worldwide, most of them in universities in the USA. There is only one in Britain, built in a collaboration between UK National Physical Laboratory and University College London, and adopted for further development by Leicestershire firm, Zeeko.

New Stronger Kwik Clean Grate Magnets from Eriez (03/11/2011 10:17:25)

Developments in magnet technology over the past decade have resulted in significantly stronger Magnetic Tubes providing levels of iron separation previously impossible. Eriez Magnetics Europe Ltd manufactures and utilises these Magnetic Tubes in powerful Grate configurations including the new Kwik Clean design. The Eriez Magnetic Grate is designed to specifically protect against fine and tramp iron contamination found in dry and free-flowing substances.

Increasing the efficiency of an IPM-based drive design with Vincotech’s new flowIPM-1B module (03/11/2011 10:04:01)

The ubiquitous Intelligent Power Module, aka IPM, has been a mainstay in motor speed control designs. And with good reason: Such designs are relatively easy and cheap to implement. With onboard gate drivers, protection, and a six pack IGBT array integrated, it takes very little engineering effort to quickly come up with an effective design. Utilizing a stamped lead frame, plastic package, and high-volume components, and given an automated production line, the IPM has all the ingredients necessary to manufacture a low-cost component solution.

Aerotech's new MPS75SL miniature positioning stage is ideal for research and development - delivering accuracy, repeatability, and ultra-fine positioning resolution in a small footprint (02/11/2011 16:58:08)

Aerotech's new MPS75SL series miniature linear positioning stages are just 75 mm wide and available in four travel ranges from 25 mm to 100 mm. Aimed at applications in university labs, or R&D centres that require precision alignment, or for assembly, test and measurement in industrial production environments, the small footprint and low-profile stage design is optimised in the use of the latest generation of miniature 1 mm pitch precision ballscrews, high resolution encoders and anti-creep crossed roller bearings for ultra smooth velocity and reduced error motion.

New TESEQ ESD Simulator Features Built-In Discharge Relay (02/11/2011 16:53:55)

Teseq has introduced the NSG 438A a new ESD simulator that includes an integrated discharge relay circuit to dissipate residual voltage in conventional ESD testing and ungrounded equipment under test (EUT) applications.

Libelium announces Vehicle Traffic Monitoring Platform offering Bluetooth Sensors communicating over ZigBee (02/11/2011 16:28:32)

Libelium announces the launch of the new Vehicle Traffic Monitoring Platform as part of its Smart Cities solution. The platform is capable of sensing the flow of Bluetooth devices in a given street, roadway or passageway while differentiating hands-free car kits from pedestrian phones. Sensor data is then transferred by a multi-hop ZigBee radio, via an internet gateway, to a server. The traffic measurements can then be analysed to address congestion of either vehicle or pedestrian traffic.

Choosing the Right Flowmeter from the Dozens of Types Available is Difficult...Paul Trevitt of Burkert UK provides a few insights. (02/11/2011 16:08:59)

There are so many different flow measurement solutions on the market today that discussing all the possible options is an impossible task. However, as with all technologies, some designs of flowmeter are more widely used than others. In this article we look at five of the most popular units, discuss their advantages and disadvantages and highlight their major areas of application.

Eplan Fluid: more than 1000 hydraulic macros (02/11/2011 16:06:03)

A new, comprehensive master data package for hydraulics now bridges the gap between fluid and mechanical design. More than 1000 new hydraulic macros in Eplan Fluid speeds up and simplify interdisciplinary documentation.

Beijer Electronics opens subsidiary in São Paulo, Brazil (02/11/2011 16:02:15)

As a part of its strategy to drive organic growth through geographical expansion and to offer customers local support, globally, Beijer Electronics now opens a subsidiary in São Paulo, Brazil. The new subsidiary will sell and market the complete range of Beijer Electronics products including operator panels, industrial PCs as well as industrial networking products. Furthermore, the subsidiary which opens today will take full responsibility for the Brazilian market handling sales and customer support locally.

New Industry-Specific Brochures Highlight Cost Saving & Productivity Benefits Of Employing Wear Protection Of Plant (02/11/2011 15:57:22)

Kingfisher Industrial is helping process companies across all industry sectors to get more life from their plants, reduce maintenance and improve productivity. The company has published a series of industry- specific brochures that highlight the benefits of employing wear protection to new or existing plant, giving users 10- year or even 20- year life from their installations.

Primary Welsh role for Börger’s de-sludging pumps (02/11/2011 15:52:55)

Rotary lobe pumps made by Börger have been introduced at Ystradgynlais WWTW in Powys to handle a demanding de-sludging application for Dwr Cymru Welsh Water. The Maintenance–In-Place 7.5kW Börger pumps have replaced failing units at Ystradgynlais, which is close to important salmon fishing stretches along the River Tawe on the edge of the Brecon Beacons National Park.

Back Manufacturing, But That Is Only Half The Story (02/11/2011 15:50:31)

Manufacturing is re-emerging as a leading economic growth engine after a rather quiet summer. However this sector alone is not big enough to pull the whole of the UK back into good times. So says Mark Ingham, sales manager at Sensor Technology Ltd in Banbury, one of the innovating yet commercially aware companies identified by politicians as vital for 'rebalancing the economy'.

Powerstax convection cooled miniature PSU increases reliability and reduces noise (02/11/2011 15:35:27)

Powerstax announces the availability of a convection cooling option for its N-03751-PFC Series of ultra-compact AC-DC switching power supplies. The N-03751-PFC Series is designed for outdoor and semi-sealed industrial applications and low noise office environments and its low profile will suit 1U rack mounted systems.

Dustproof steppers added to Astrosyn motor range (02/11/2011 15:29:39)

Designed to operate in dusty environments, the new MY34HYS range of hybrid stepper motors from Astrosyn International Technology produce very high holding torques of up to 8 Nm. The motors offer IP65 environmental protection thanks to their oil sealed front bearing and rubber sealed end bell and terminal block at the rear.

Fluke offers free telephoto or wide angle lens with a P3 Series thermal imager (02/11/2011 15:22:51)

Fluke is offering a free telephoto or wide angle lens worth over £1,000 to customers purchasing any of its high-performance P3 Series Thermal Imaging cameras. The Fluke P3 Series includes the Ti27, Ti29 and Ti32 models for troubleshooting and preventive maintenance of electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and more, and the TiR27, TiR29 and TiR32 models for building envelope, energy audit, restoration and remediation, inspection and roofing professionals.

Satellite Demonstrates Stunning High Resolution Imagery (02/11/2011 14:10:35)

The first high resolution satellite imagery has been released from NigeriaSat-2 - a 300kg class earth observation satellite manufactured by Surrey Satellite Technology Ltd for the Nigerian space agency. Benefiting from a high performance Camera with optical components manufactured by Optical Surfaces Ltd (Kenley, UK) - the satellite has been able to capture stunning 2.5m resolution images enabling detailed analysis of ground structures, aircraft and vehicles.

Sensortechnics’ Flow Sensors Offer Very High Resolution and Accuracy over the Complete Measuring Range (02/11/2011 11:12:24)

Sensortechnics develops highly sensitive thermal mass flow sensors for air and gases with measuring ranges up to 500 l/min. For the demanding requirements of medical ventilators Sensortechnics offers custom solutions with two sensing elements featuring excellent resolution and accuracy over the complete measuring range. One sensor chip is located in the middle of the main stream for the measurement of very small flows around the zero flow point. A second chip is arranged in a bypass configuration and measures higher flows up to full scale. The flow sensors utilise a microcontroller for digital signal processing and can continuously switch between the two sensing elements. Sensortechnics' mass flow sensors achieve very fast response times below 10 ms and offer a linear analog output signal and a digital I²C or SPI bus interface at the same time.

Eaton’s Innovation and Electrical Excellence Win Prestigious Industry Awards (02/11/2011 10:57:56)

Eaton is delighted to announce that it was awarded Innovative Residential/Domestic Product of the Year at this year's Electrical Industry Awards. Eaton's Trading Standards and Policy Manager, Kevin Harris, also won the award for Outstanding Contribution to Electrical Excellence. Additionally, Eaton was highly commended in the Innovative Power Product of the Year category. The awards were presented at a ceremony held in London on 20th October, which coincidentally, was also the eve of Eaton Corporation's 100 year anniversary.

Miniature micropositioning rotary stage features ceramic motor drive (02/11/2011 10:52:35)

Nanomotion's new FBR60 piezo-electric miniature rotary stage is now from available from Heason Technology. Providing an exceptionally compact footprint and low profile for precision motorised rotary positioning, the stage has a 60 mm diameter rotating element and overall height of just 35 mm and features a high-stiffness cross roller bearing construction, twin piezo-electric motors that provide zero backlash direct-drive, and an integral non-contact optical encoder with micropositioning resolution options of 5 or 0.5 arc-sec.

Bonded Nut Plate Stand-Offs Made With Victrex Peek Polymer Provide Support For Cargo Doors In New Generation Commercial Aircraft (01/11/2011 16:55:44)

When Click Bond wanted to develop a bonded nut plate stand-off for the cargo doors of a major manufacturer's new generation of commercial aircraft it chose VICTREX PEEK polymer for the composite part. The stand-offs, which consists of a nut plate attached to a stand-off bracket, are used to provide support for the cargo doors as attachment points for the cargo door liner.

Airknives help clean-down times and increase production levels for specialist flavourings/ingredients manufacturer (01/11/2011 16:44:47)

TasteTech Ltd., specialist manufacturer of 'controlled release' flavourings and ingredients for applications in bakery, confectionery and chewing gum products has recently increased production and cut machine clean-down times by employing airknives in a novel way.

NVision Saves Toilet Manufacturer $20,000 and Four Weeks in Developing New Model (01/11/2011 16:26:56)

Aircraft Technologies saved $20,000 and four weeks in reduced tooling costs/time for a new model by utilizing NVision's laser scanning and engineering services. "By scanning an existing upper and lower bowl assembly and modifying the resulting CAD models to fit parts that we already had tooling for, we substantially reduced the tooling cost and got the product to market faster," said Mark Riebesehl, Owner and Vice President of Operations for Aircraft Technologies.

Miniature couplings for medical applications (01/11/2011 16:01:57)

Ruland offers miniature rigid couplings for a wide variety of medical devices. Common applications include test and measurement systems, imaging, patient positioning, and liquid handling such as chromatography.

Molex UL2237-Compliant Brad Power Solutions (01/11/2011 15:51:52)

Molex Incorporated offers machine builders a complete line of Brad modular power solutions featuring rugged, moulded trunk cables for feeder circuits up to 30A, 600V AC/DC and moulded drop cables for branch power distribution circuits up to 15A, 600V AC-DC. Designed in compliance with the National Fire Protection Association's NFPA-79 Electrical Standard for Industrial Machinery, Brad power components from Molex are UL2237 (PVVA) listed for use in motor branch circuits.

Continued improvement and additions throughout their standard rotary solenoid range has prompted Geeplus to produce a new guide to the revised specifications and increased applications of their products. (01/11/2011 15:48:22)

The most important of the new characteristics are the extended angle of rotation up to 95°, a starting torque of up to 13Nm (gross starting torque at 20°C), an extended life time of up to >50 million cycles and extremely fast response time with switching times of < 5ms possible (depending on size and load)

Engineering Firm Aims To Improve The Image Of The Humble Clamp (01/11/2011 15:41:18)

Toggle clamps are already well know as an essential part of the manufacturing industry, yet are generally thought of as being useful, but not terribly exciting. Engineer Dawn Tebbett is aiming to change that, demonstrating their potential in ways beyond engineering...even protecting the environment.

Fluke offers entry level thermal imager at reduced price Limited period offer plus 'Try & Buy' (01/11/2011 15:01:49)

Fluke is offering its entry-level Fluke Ti9 Thermal Imager, targeted at electricians and industrial maintenance technicians, at a reduced price for orders placed before 31st December 2011 - £2090 instead of £2490. During the same period, Fluke is offering a no obligation 'Try & Buy' promotion, an on-site 2 day trial of the Ti9 for professionals who have no, or limited, experience of using thermal imagers to inspect, repair and verify electrical infrastructure and electromechanical equipment. Rated to IP54, the rugged Fluke Ti9 is optimised for work in harsh environments.

Haydon Kerk Motion Solutions Introduces Folded-Over Motorized Linear Rail System (01/11/2011 14:54:54)

The Kerk RGS/RGW linear rail platform by Haydon Kerk Motion Solutions now includes a 180o folded-over motorized design. This design allows for a small footprint linear actuator system perfect for precision motion applications where space is at a premium.

Kemppi Launches New Range Of Minarc Evo Lightweight Inverter Welders For Quality Welding, Wherever Work Takes You. (01/11/2011 14:50:12)

Kemppi has announced the launch of the Minarc Evo range of lightweight inverter welders carrying on from the international success of the award winning, Minarc range, first launched in 2001. The new Minarc Evo product range offers a choice of MMA, MIG/MAG and DC TIG welding equipment which are easy to use and light to carry. All the machines in the Minarc Evo range include Power Factor Correction (PFC) technology for ultimate energy efficiency, delivering their maximum output current at 35 % duty cycle from any single phase 230V, 16A industrial power network and are fully compliant with the latest European EMC Harmonics Directive, IEC6000-3-12.

Fluke offers free kit with a Fluke 120 Series ScopeMeter (01/11/2011 14:29:21)

Until 31st December, Fluke is offering purchasers of a compact Fluke 120 Series ScopeMeter® a free Fluke SCC 120 Kit (with the purchase of either the Fluke 123, 124 or 125 ScopeMeter). The SCC kit, usual list price £330, comprises a hard carry case, a USB optical interface cable and FlukeView ScopeMeter software, which enables the user to document, store and analyse readings. The handheld ScopeMeters are the rugged solution for industrial troubleshooting and installation applications, combining a powerful oscilloscope, a true-rms multimeter and 'paperless' recorder in one affordable, easy-to-use instrument.

Type tested, modular junction boxes and distribution boards key to reliable, cost-effective solar power installation (01/11/2011 14:21:49)

A furniture business in Germany is reaping the financial benefits of 266kW of solar power following the installation of 7200m2 of solar panels. Key to the success of the installation are Hensel ENYSUN type-tested distribution boards and modular, pre-wired photovoltaic junction boxes – products distributed exclusively in the UK by Telford-based electrical specialist CEE Norm.

Eriez Launch New Auto Kwik Clean Grate (01/11/2011 13:52:37)

Eriez Magnetics Europe Limited wishes to announce the introduction of a new Magnetic Separator into their ProGrade range. The ProGrade Auto Kwik Clean (AKC) Grate captures problematic ferrous metals, with the added advantage of automated cleaning. This preserves product purity whilst eliminating downtime of machinery and saving costs.

MicroCare Introduces its Newest Cost-Saving Products at Productronica Hall A4 Stand 521 (01/11/2011 13:25:24)

With the Productronica taking place next month, MicroCare is preparing to introduce its newest innovative range of chemistries and cost-saving production aids to the market. The full spectrum of MicroCare products will be exhibited in Hall A4 Stand 521 at the show in Munich, but perhaps of most note is the newest generation Trigger Grip System. The Trigger Grip works in partnership with the MicroCare portfolio of aerosol cleaners to clean circuit boards, mechanical parts and stencils. It can be adopted to suit the operator's needs by way of interchangeable spray-thru brushes or dispensing needles.

Wigan Infirmary Expected To Save Over £48,000 A Year Following Installation Of Gem Steam Traps (01/11/2011 11:40:41)

The Royal Albert Edward Infirmary in Wigan, better known as Wigan Infirmary, anticipatesexpects that it will avoid spending £48,847 per annum in fuel and maintenance costs following the installation of Thermal Energy International's GEM venturi orifice steam traps. A total of 157 GEM steam traps have been installed throughout Wigan Infirmary's site providing the hospital with a projected payback in just under two years on steam savings, increased efficiency, failed traps, maintenance and Carbon Offset Value costs.

Oakland Care Group Reduce Risks From Power Cuts With ‘Powercall Power Within The Hour’ (01/11/2011 11:34:11)

Dedicated to providing high quality care and for the residents at its care homes on the South Coast, Oakland Care Group has contracted with shentongroup's Powercall generator callout service to ensure it has standby power during a power outage. Now, thanks to the unique Powercall service, residents and staff have peace of mind knowing that when a powercut occurs they will have a standby generator in situ and connected up within an hour.

AVT Gets On Board With Cutty Sark (01/11/2011 11:29:57)

AV Technology has successfully assisted with the critical lifting stage of an essential upgrade project for the world famous clipper ship, Cutty Sark. The consultancy was contracted by SH Structures Ltd, who were responsible for the design, manufacture and installation of all the steel work on the project. The work has been crucial to the conservation project, which includes raising the ship by three metres to build a permanent visitors centre underneath. This historic clipper is based in Greenwich and is due to be reopened next Spring.

For high performance in a tight integrated motion application, the KBM frameless brushless motor is the answer (01/11/2011 11:28:25)

Introduced by Micromech is the Kollmorgen new family of frameless, brushless motors derived from the proven and extensive portfolio of Kollmorgen designs. They are available in fourteen sizes for low or high voltage operation delivering torque, power and speed, within a cost-effective package and have a compact footprint. They give the system designer high flexibility in specifying a motor that fits the specific performance and dimensional requirements of the application but without incurring expensive engineering or other capital fees. Their advanced electromagnetic designs deliver maximum torque density which minimises required motor space envelope. They have extremely smooth rotation with minimal cogging, low total harmonic distortion (THD) and a broad operating speed range with rapid acceleration.

New Product: Heavy Duty Architectural Hinges from FDB Panel Fittings (01/11/2011 11:26:40)

Designed for strength and attractive physical appearance the Phoenix range of heavy duty architectural hinges now available from FDB Panel Fittings demonstrates a high degree of performance with EN1935 test performance from grades 1 to 14 and with CERTIFIRE approvals. They are suitable for applications such as department stores, schools, bank doors, offices and residential installations. These situations of course include external doors (circa 160kg), fire doors, internal doors and lightweight furniture/cupboards/wardrobes etc.

Teseq’s New Power Amplifier Delivers Reliability and Consistency (01/11/2011 11:18:10)

Teseq has expanded its broadband amplifier line to include a new Class A model that operates from 10 kHz to 400 MHz with a saturated power level of 110 W. The CBA 400M-110 uses gallium arsenide (GaAs) integrated circuit technology to provide markedly better compression characteristics and increased efficiency than comparable silicon-based power amplifiers.

New High-Power LED Light Source (01/11/2011 11:07:44)

STEMMER IMAGING has announced the availability of a new, economical and compact lighting system from Volpi. The IntraLED 3 is characterised by its excellent light intensity, very good homogeneity values and long service life.

Robots arise to lead manufacturing investment (01/11/2011 10:25:50)

A newly announced scheme to provide government funding for the automation of industrial processes needs to be carefully managed so that a nationwide strategy of continuous reinvestment develops. This is essential if the UK is to rebuild its manufacturing sector into a cornerstone of the economy. So says Barry Weller, a specialist robot engineer with Mitsubishi Electric, who thinks there is already evidence of a positive trend.

Additional Capabilities for M³ PLASMA (01/11/2011 10:09:29)

ESAB Cutting Systems m³ plasma system is now available with a new water injection cutting capability designed to significantly reduce the cost of cutting stainless steel and aluminum, while improving edge quality and dross content. Water injection cutting offers cutting speeds up to 100% faster than shield-gas systems.

Nihon Superior to Introduce the Newest Addition to the SN100C Lead-Free Solder Series at SMTAI 2011 (01/11/2011 10:04:16)

Nihon Superior Co. Ltd., a supplier of advanced soldering materials to the global market, will introduce the newest addition to its SN100C lead-free solder series in Booth #310 at the upcoming SMTA International Conference & Exhibition, scheduled to take place October 18-19, 2011 at the Fort Worth Convention Center in Fort Worth, TX.

Efficient drive solutions from NORD complement IE2 and IE3 motors (01/11/2011 09:55:54)

It is reckoned that more than two thirds of the total energy spend for industrial automation is consumed by electric drive technology and that an individual electric motor's energy consumption makes up about 98% of its total cost of ownership over its average life. From these factors it is clear that investment in efficient drive technology is essential. The IEC60034-30 standard, making the IE2 energy efficiency class mandatory throughout Europe for a large number of electric motors from June this year, will begin to ensure reduced energy consumption on a global scale.

Most Powerful Air Hoist Lifts 125 Tonnes (01/11/2011 09:46:02)

What is believed to be the world's first air operated hoist with a lift capacity of 125 tonnes has been manufactured by materials handling and lifting specialists J D Neuhaus. This is the most powerful unit in their EH range of handling equipment.

Emo 2011 DMG and MORI SEIKI Collaboration Nearing Fruition (31/10/2011 16:53:51)

An entire hall was booked jointly by DMG and MORI SEIKI at this year's EMO machine tool exhibition in Hannover, underlining the increasingly close co-operation between the respectively German and Japanese machine tool builders. In the 7,600 m² area of hall 2, believed to be the largest stand ever booked at the biennial European show, no less than 97 high-technology machines were showcased under power, of which 25 made their world premieres.

Elesa's Smart New GN315 Push Button Snap Locks (31/10/2011 16:42:42)

These new GN315 push button snap locks from Elesa are ideal for small doors and panels where a slam closure is required with quick opening. This is achieved with a radial spring loaded slide which snaps into place when the door is closed – opening is by simple push button to disengage the slide. They are ideal for inspection cover panels or doors, or for quick location of frequently removed equipment where manual release is appropriate.

Fluid Properties Sensor for Oil in Water Content (31/10/2011 16:29:49)

Measurement Specialties has just released its new fluid property sensor (HTM2500B3C4OIL) for measuring dissolved water in oil. This is critical data for oil system management as water consumes oil additives that can result in severe mechanical damages due to degradation of lubricant properties. This rugged device is specifically designed for OEM applications where cost-effectiveness, accuracy and reliability are critical.

Water Jet Systems Manufacturer Jet Edge Exhibiting at 2011 China Aerospace and Aviation Technology Show (31/10/2011 16:21:01)

Jet Edge will exhibit at the 2011 China Aerospace and Aviation Technology Show, Nov. 1-5 in Shanghai. Look for Jet Edge in the AMT Group Pavilion – Booths A09-A18, A39-A56, Hall N5, Shanghai New International Expo Center. Jet Edge technical experts will be available to answer questions about Jet Edge's precision water jet cutting and surface preparation equipment and its many applications in the aerospace industry. Interested participants can register to attend an upcoming free X-Stream waterjet application and operation training and demonstration workshop at Jet Edge's local Shanghai office and showroom.

NewAge Industries Extends Its Excellent Product Quality Rating to Seven Straight Years (31/10/2011 16:07:07)

NewAge Industries is pleased to announce the successful continuation of its product quality program. The company, which manufactures plastic and rubber tubing for industries such as pharmaceutical, alternative energy, medical, food and beverage, industrial, chemical, appliance, robotics, and semiconductor, has been keeping a close watch on its quality assurance processes for decades. It now boasts a track record of seven straight years with an overall product quality rating of 99.7% or better.

Grinding Wheel With Carbon Fibre Core Weighs 80 Per Cent Less (31/10/2011 15:44:28)

New superabrasive product minimises vibration, consumes less energy and is easier to handle For external cylindrical grinding of automotive components such as camshafts, crankshafts and gear shafts in large volumes, Tyrolit has launched a range of vitrified CBN (cubic boron nitride) wheels that have a reinforced carbon fibre core. The new product, called GENIS CF, weighs one fifth of a conventional steel-cored grinding wheel.

Vertical Lathe Has Machining Centre Capabilities (31/10/2011 15:32:02)

Manufacturers of large, heavy components are increasingly demanding the capability to machine them in a single set-up to achieve short lead times, improve accuracy and reduce work-in-progress. Aimed at these users is the new Okuma VTM-1200YB from UK agent, NCMT. The 30-tonne, double column machine has been designed as a cross between a heavy duty vertical turning and boring facility and a fully-featured, 5-axis machining centre. Structurally it is configured as a bed-type machining centre but instead of a conventional table, it has a 30 kW / 500 rpm / 6,000 Nm torque turning spindle with 360,000-increment C-axis positioning.

YASKAWA and MOTOMAN have merged under the name 'YASKAWA Europe (25/10/2011 16:11:50)

The merger of the two YASKAWA subsidiaries, specialists for the production of servo and inverter drives and robots respectively, is in line with the company's new marketing strategy for the world of automation. The step allows a more integrated customer service, generating further synergies and uniting the offering under one single brand name. In future, the new business units 'Robotics' and 'Drives and Motion' will operate under the roof of YASKAWA Europe, offering customers of both segments integrated solutions. Only very few competitors in the global market will be able to match the scope of YASKAWA's one-stop product portfolio of electric drives and industrial robots.

Deeter add Modbus Gateway Integration to Wireless Sensor System (25/10/2011 16:07:33)

The Deeter Group, market leaders in the design, development and manufacture of electronic sensors and control systems, has added a Wireless Modbus Gateway to its range of Wireless Sensor Network products.

CVB 2011 CameraSuite MultiOS For Different Operating Systems (25/10/2011 16:04:25)

CVB 2011 CameraSuite MultiOS, the latest version of STEMMER IMAGING's high-performance and easy-to-install development environment for GigE Vision cameras, can now be used with a variety of operating systems. In addition to the 32-bit versions of Windows (XP, Vista, 7), the new CVB2011 CameraSuite MultiOS now also supports 64-bit Windows 7 and 64-bit Linux (Ubuntu, Kubuntu, Mint).

COAX to PCB Connector System Handles 67GHz (25/10/2011 11:52:54)

The MMPX snap-on connector system from connectivity specialist HUBER+SUHNER provides true 67GHz/80Gbps coaxial to PCB transition. Designed to offer industry leading electrical performance from the smallest mechanical format, the MMPX series consists of cable connectors and assemblies together with PCB connectors and adaptors.

Automotive low-side MOSFET pre-driver IC (25/10/2011 10:55:55)

The new A3944 from Allegro MicroSystems Europe is a low-side MOSFET pre-driver IC targeted at the automotive market.

NEW MERCURY II 6000 ENCODER SETS BENCHMARKS FOR PRECISE NANOMETER POSITIONING & AFFORDABILITY IN VACUUM ENVIRONMENTS (25/10/2011 10:39:50)

Inmoco has launched a new version of its new Mercury II™ 6000 series of micro encoders from MicroE Systems, for use in vacuum environments. The new encoder is rated to 10-8 torr vacuum, and bake out at 150 degrees C for 48 hours. In common with other encoders in the Mercury II™ 6000 series, it enables OEMs and users to reduce both system size and cost. The encoder's sensor height is half the size of competitive encoders, making it easier to fit into system designs. This reduction can also cut motion system weight and cost by allowing the use of smaller motors and stages.

PB Swiss Tools Introduces PC Repair Toolkit (25/10/2011 10:34:53)

Count On Tools Inc., a leading provider of precision components and SMT spare parts, debuting the PB Computer Repair Toolkit from PB Swiss Tools. The new toolkit is designed for repair technicians and field service personnel to install, maintain and troubleshoot PCs, workstations and more.

Video of the Week – Guide trough assembly made simple with igus (25/10/2011 10:29:00)

Guide troughs are used to enable energy chain to glide smoothly and securely over travel lengths stretching from 5 metres and upwards, depending on the type of chain used.

New generation SKF Microlog Inspector provides Windows Mobile compatibility (25/10/2011 10:25:27)

SKF, the knowledge engineering company, has launched SKF Microlog Inspector, the next generation SKF MARLIN inspection system, providing the ability to manage workflow and data collection effectively, within and between different plant disciplines through one easy-to-use, handheld device. The system is compatible with most Windows Mobile portable devices, enabling existing handhelds to be used, if required, when performing process and quality inspections essential for operational efficiency across a range of manufacturing industries.

IT ALL HINGES ON EMKA! (25/10/2011 10:20:08)

So ubiquitous are hinges in our everyday life as access solutions that if "the hinge" did not exist it would be a really urgent matter to invent it – and EMKA would be right up there at the front of the development program! EMKA's hinge program covers a welter of approaches to providing that simple axis point in engineering space where door and cabinet, panel and machine can come together, with a degree of freedom that enables the mechanism to operate

UK SUCCESS STORY, HJ WEIR, EXPANDS INTO USA, SUPPORTED BY WEG AND ERIKS SUPPLY PARTNERSHIP (25/10/2011 10:14:35)

When David Cameron talked about manufacturing becoming the engine of future growth for the UK economy, the type of company he had in mind was probably H J Weir Engineering Co Ltd, one of the world's largest manufacturers of flatwork finishing equipment. H J Weir has been providing separating, feeding, folding and stacking solutions for the global laundry industry for over 50- years. Now the company is expanding into the USA, and is taking its long standing and highly successful supply partnership, with ERIKS and WEG motors, along with it.

Precision Waterjet Concepts Installs Second Jet Edge Waterjet Cutting System (25/10/2011 10:10:53)

Jet Edge Inc. is pleased to announce that Precision Waterjet Concepts Inc. has installed a Jet Edge Mid Rail Gantry waterjet cutting system at its full-service 5-axis and 2-axis waterjet cutting facility in Northern Minnesota. The Mid Rail Gantry is the company's second Jet Edge system. They also have two 5-axis waterjets.

LARGE 5-AXIS MACHINING CENTRE HAS TURNING CAPABILITY AT ANY TABLE ANGLE (25/10/2011 10:01:53)

To reduce production costs and increase accuracy when producing complex parts requiring rotational as well as prismatic machining, Hermle introduced at EMO 2011 an 'MT' version of its largest 5-axis machining centre, the C 60 U, capable of turning components in the same clamping. Availability in the UK is through sole agent, Geo Kingsbury Machine Tools.

Lightweight Rotary Latch Delivers Reliable Electromechanical Latching In A Compact Package (24/10/2011 16:00:20)

The Southco R4-EM Light Duty Electronic Rotary Latch provides a simple, versatile electromechanical latch solution for a variety of applications. Constructed of engineered composite plastic material, the Light Duty R4-EM provides a 65% weight saving over the standard steel housing version. It features push-to-close electronic release, a versatile rotary mechanism and concealed latching.

Aluminum paddle actuator delivers durability to outdoor applications (24/10/2011 15:52:20)

The Southco AC-75 Single Point Paddle Actuator expands on the proven performance of the all-plastic AC-70 with a robust new construction. The aluminum AC-75 features a powder coat for strength, durability and usability in a wide range of temperatures. It meets off-highway industry requirements and is also ideal for transportation and industrial machinery applications.

Arcolectric partners with BioCote Ltd to develop (24/10/2011 12:16:45)

Elektron Technology plc, owner of the Arcolectric brand, has signed a partnership agreement with BioCoteLtd to develop what are believed to be the world's first antimicrobial equipment switches. BioCote's silver ion technology will be incorporated into Arcolectric's switch products at the time of manufacture to provide proven, built-in antimicrobial protection against a wide range of microorganisms, including bacteria, mould, and viruses for the expected lifetime of the product. Initially Arcolectric will focus on incorporating the technology into five of its most popular switches and switch covers, with the potential to expand usage across its full product range and other Elektron Technology plc branded products going forward.

Hydraulic Adapter Manufacturer Generates 17,000 ‘Sales Ready’ Leads from CAD Downloads (24/10/2011 12:13:49)

Catalog Data Solutions (CDS), has published a case study (download it from www.catalogdatasolutions.com) that explains how Tompkins Industries identified their challenges, chose and implemented a thoroughly up-to-date solution and achieved amazing results, including generating over 17,000 "sales ready" leads in the last year.

SHERBORNE SENSORS SELECTS TRIKTEK SOLUTIONS AS MANUFACTURER'S REPRESENTATIVE (24/10/2011 12:09:50)

Sherborne Sensors, has announced its selection of Tritek Solutions, and its subsidiaries, to represent the Company on both the US West Coast, and in the New England region. Tritek Solutions will be responsible for providing total sales support for the entire line of Sherborne Sensors' products and services, including inclinometers, accelerometers, force transducers, displays, power supplies, and accessories.

Magma brings Silicon One Seminar Series to Europe (24/10/2011 12:06:31)

Magma Design Automation brings its Silicon One Seminar Series to Europe next month, with one-day seminars to be held in the UK and France. The European dates are part of a global roadshow which includes events in the US, Korea, China, Taiwan, Japan and Israel. Magma will host the France seminar on Tuesday 8th November at Sophia Antipolis, and on Thursday 10th November in London.

New From Intertronics – Flexible Led-uv Curing – Flood Or Spot (24/10/2011 12:00:36)

The new DYMAX BlueWave LED DX-1000 is a unique and flexible 385 nm LED curing system that can be configured to operate as either a small-area flood or spot-cure system. In flood mode, up to 1 W/cm2 can be delivered over a 1" x 1" (2.5cm x 2.5cm) area. In spot mode, a single or multi-pole lightguide can be installed into an optional adapter to deliver up to 15 W/cm2 in a high-intensity spot.

Why the UK PV industry will continue to grow despite the FiT cuts… (24/10/2011 11:59:08)

On the 9th of June it was announced that, as part of the outcome of the first comprehensive review of the Feed-in-Tariffs (FiT) scheme, there will be reductions in benefits for PV installations that are larger than 50 kW – and for all stand alone PV installations. While many in the industry see this as a blow to an emerging market, Spelsberg UK, a leading manufacturer of PV enclosures, believes that the UK PV market will continue to grow in relation to other European countries.

Deeter Announce Free Wireless Sensor System Site Survey Service (24/10/2011 11:55:09)

The Deeter Group announce the introduction of a free site survey service for customers considering the implementation of a Deeter or any other wireless sensor network operating in the 2.4GHz ISM band. Deeter's own wireless sensor networks may be used to remotely monitor temperature, pressure, flow, humidity, liquid level, float or proximity switches or any sensor connected to a 4-20mA control loop.

New TwinPower Acuation Technology Reduces Size of Miniature Solenoid Valves by up to 54% & Energy Consumption by 75% (24/10/2011 11:55:02)

Bürkert's new TwinPower actuation technology has solved the problem of making solenoid valves considerably more compact, while retaining the same power output. Compact, powerful, and energy-efficient, TwinPower actuation technology increases power density in solenoid valves by means of two coils. This innovative design is being used for the first time in Burkert's newly launched types 6624 and 6626 media-separated, miniature solenoid valves.

Junction boxes assure functional integrity in the event of fire (24/10/2011 11:51:58)

For applications where maintaining functional integrity in the event of fire is vital, CEE Norm now offers an expanded range Hensel DK cable junction boxes. In addition to the existing sheet steel, power coated junction boxes, the range now includes Duraplastic enclosures. All models feature connecting terminals made from ceramic to offer resistance to high temperatures, with versions providing from 30 minutes up to 90 minutes of fire protection.

Rigel 288 passes the test at Irish healthcare specialists (24/10/2011 11:48:23)

One of Ireland's leading suppliers of healthcare products has turned to the Rigel Medical 288 analyser to improve the electrical safety testing of products provided to customers.

“IP-54” Sealed, Low Current, 24 Vdc Gearmotor Develops 29 Lb. In. Torque at 230 RPM (24/10/2011 10:42:27)

Midwest Motion Products is pleased to announce the release of a new DC Gear Motor, with integral failsafe brake, the Model No. MMP D22-376D-24V GRA60-032 BR-005. Accepting any 24 Volt DC source, including solar or battery power, this robust Gear Motor measures just 2.24" in Diameter, by 7.2" long, including the brake, and has a keyed output shaft of 14mm diameter by 25mm long. Easy mounting is accomplished with 4 "face mount" M5.5 threaded holes, equally spaced on a 52mm Dia. B.C.

Cobham Technical Services Supplies Electromagnetic Design Software To Siemens Wind Power, To Help Optimise Generator Designs (24/10/2011 10:40:10)

Cobham Technical Services has been awarded a contract for its powerful Opera electromagnetic design tool by Siemens Wind Power, a leading supplier of wind turbines for onshore, offshore and coastal sites. Fast and accurate electromagnetic simulation helps wind turbine suppliers to make breakthroughs in wind turbine design. The Siemens design team employs the Opera electromagnetic simulator from the Vector Fields Software product line of Cobham Technical Services to help it develop new generator concepts, and often runs thousands of simulations within a few hours to discover the best design solution for applications.

Horizontal flow wrapping machine (24/10/2011 10:38:36)

The flow wrapping machine market is very competitive and as a result a machine manufacturer was facing falling profit margins. At the same time, the request for more flexible machines forced him to develop even more elaborate concepts, increasing design times and costs.

Catalog Data Solutions Catalog Solution Selected by Amphenol Industrial Operations (24/10/2011 10:35:57)

Catalog Data Solutions has announced that Amphenol Industrial Operations (AIO) has selected to use its online parts catalog and CAD download solution. "Industrial product selection and procurement has changed with the internet. Existing and potential customers now often research and select products online even before talking to any supplier. The right product for the customer's current search must be intuitively easy to find and select online, then incorporate into their CAD design," said Chris Van Soest, Director of Marketing, Amphenol Industrial Operations. "We selected the CDS SaaS solution for our 'Amphenol Design Online' system because it meets the needs of our engineering customers with a simple and intuitive user interface, industrial parametric search capability and excellent value for money. We look forward to our revised website going live with this SaaS solution later this year."

Wireless Connectivity Applied To More Flir Thermal Imaging Cameras (24/10/2011 10:30:28)

For some time FLIR Systems' customers have been able to extend the scope and depth of thermal imaging inspection with features based on wireless technology. Users have confirmed efficiency gains, error reduction and savings on reporting time through WiFi compatibility and Meterlink technology. Now FLIR Systems is applying these features to even more of its cameras.

ISaGRAF releases ISaGRAF version 6.0.3 (24/10/2011 10:27:41)

ISaGRAFhas released ISaGRAF version 6.0.3. ISaGRAF is the industry-leading IEC 61131-3 and IEC 61499 compliant firmware and workbench for building industrial automation products. ISaGRAF 6.0.3 includes several new plug-ins including a Sequential Function Chart (SFC) editor, and useful tools such as Device View, Description Windows and a Document Generator.

8D (38999 Series III) with Clinch nut (24/10/2011 10:25:16)

The Souriau 8D connector with integrated clinch nut allows easy fitting of aluminum sockets to electronic control boxes. It speeds up Series III connector fitting times, whilst at the same time reducing the number of fixing accessories (bolts, washers etc.) needed. It is particularly suited to boxes with difficult access and requiring maintenance, in an aeronautical or military environment.

Taking The Guesswork Out Of Solar Panel Fault Finding (24/10/2011 10:20:32)

Thermal imaging, the technology that is now widely used for a broad variety of preventative maintenance applications is proving ideal for solar panel installers. Tony Hargan of South Survey in Clitheroe sells the FLIR range of thermal imaging cameras and he confirms the falling price of the technology is proving a powerful driver. "Cost is no longer a barrier to installers using this technology. Although the advanced thermal imaging cameras offer more sophisticated functions and the ability to see faults at greater distances, an entry level model can still do the job," Tony Hargan explains. "Thermal imaging provides a quick, easy and efficient method of pinpointing a problem cell."

Electrox Raptor Is A Winner For GPR Motorsport (24/10/2011 10:17:33)

For suspension specialists GPR Motorsport, speed and accuracy isn't just important to the BTCC (British Touring Car Championship) teams they supply, but to its entire manufacturing process. The Buckinghamshire-based company has invested in an Electrox Raptor EF Technology laser with D-Box Workstation to ensure that its marking system is fast and efficient and remains legible even in the most testing conditions.

Zeeko Named Midlands Region Winner for International Trade Awards (24/10/2011 10:14:55)

Ultra-precision polishing machine and measuring equipment manufacturer, Zeeko, has won the Midlands regional heat of the 2010/11 International Trade Awards, sponsored by Santander Corporate Banking in association with law firm, Eversheds. The prestigious awards recognise UK importers and exporters that have excelled over the past year, despite the challenges of the current global economic climate.

Measuring Gas Cylinder Temperature During Filling with PyroCouple and PyroBus Infrared Temperature Sensors (24/10/2011 10:03:09)

Infrared temperature sensors from Calex Electronics have been used with success for over 7 years by a provider of packaged gas for measuring the temperature of gas cylinders as they are filled. When a gas cylinder is filled and the pressure increases, the cylinder will warm up. The temperature of the surface is monitored for several reasons:

Dawson Shanahan new manufacturing facilities open day (21/10/2011 15:19:52)

Dawson Shanahan, the European precision cold forming and engineering firm, will be showcasing new production and plant equipment with a factory open day at its manufacturing facility in Potters Bar, Hertfordshire on Thursday 13th October. The factory tour is to be attended by local MP James Clappison, Mayor for Hertsmere Peter Knell, and members of the press to demonstrate how this new manufacturing investment is benefiting key markets, such as medical, power generation and aerospace.

Sherborne Sensors Launches LSW Gravity–Referenced Servo Inclinometer Ideal for precision angular measurements in all-weather environments (21/10/2011 15:15:05)

Sherborne Sensors, a global leader in the design and manufacture of sensors for military, aerospace and industrial applications, announces the LSW series, a family of rugged, high&#8208;precision inclinometers, designed for use in demanding all&#8208;weather applications.

ALL-ELECTRIC TUBE BENDING MACHINES SET TO HELP SPECIALIST FABRICATOR ACCELERATE PRODUCTION OF HIGH ACCURACY PARTS (21/10/2011 15:01:15)

Unison has supplied two all-electric tube bending machines to tube fabrication specialist Iracroft, to help meet the company's expanding production needs for high accuracy parts. The machines – 30 mm and 40 mm models from Unison's Breeze range – have just been commissioned at Iracroft's facilities in Blandford, UK.

merger of Vero Software and Planit Holdings (21/10/2011 14:56:28)

Vero Software, a leading provider of CAD/CAM/CAE solutions for the tooling industry, is pleased to announce the merger of Vero Software and Planit Holdings, a leading developer of CAD/CAM software for the production engineering, sheet metal, metal fabrication and woodworking sector.

Ultra High Precision Etalons (21/10/2011 11:18:29)

Operating in a uniquely stable manufacturing environment - Optical Surfaces Ltd has established itself as a leading international supplier of Fabry-Perot etalons in a range of shapes and sizes up to 150mm in diameter with matching accuracies to lambda /300.

GAS INSPECTORS CERTIFICATION COURSE GETS GLOWING ENDORSEMENT (21/10/2011 11:15:37)

Murex Welding Products City & Guilds Accredited Gas Equipment Inspectors Certification and Recertification Courses are designed for all those responsible for the safety aspects of oxy-fuel gas systems. One of the latest attendees is Peter Davy, Health & Safety Coordinator, Boston College, Lincolnshire. He found that the course gave him the knowledge and competency to ensure the safety of all the learners and staff involved in the many training courses, which use gas equipment at the college.

Sudlows demonstrate commitment to regional development with Metro Networks win (20/10/2011 09:51:55)

Sudlows, has successfully secured a contract to design and install a new data centre facility on the site of the old Belle Vue Filling Station in Manchester for hosting company Metro Networks.

NEW AQUEOUS, NMP FREE COATING DESIGNED BY LORD CORPORATION (20/10/2011 09:46:06)

LORD Corporation's Autoseal® 3500F is designed for use on dense EPDM glass run channel applications where abrasion and chemical resistance are required. The Autoseal 3500F coating offers low coefficient of friction, excellent glass drag properties and non-stick features to glass. Further, LORD Autoseal 3500F reduces squeak and itch noise that often results from automobile vibration and is problematic in many vehicles.

SharePoint-based Engineering Document Management and Control in the Food Process Industry (20/10/2011 09:40:31)

Cadac Organice BV, a Microsoft Gold ISV Partner and developer of engineering solutions on SharePoint, has published a reference case about SharePoint-based engineering document management and control in the food process industry.

SNAP-IN LOW PROFILE SWINGHANDLE FROM FDB (20/10/2011 09:36:30)

The market for most products is truly global these days – so it is that this SNAP-LINE flat swinghandle originally designed for a US requirement is now brought to us by the good folks at FDB Panel Fittings who have spotted its advantages for UK specialist panel builders. This small, low profile swinghandle is ideal for enclosures and control panels where its "no-tools" snap-in fitment and resistance to vibration will be appreciated.

Singapore Office Opened (20/10/2011 09:34:15)

Precision positioning systems specialist PI (Physik Instrumente) expands further into Asian markets with the opening of a direct office in Singapore, in June of this year.

Cliff Electronics Expands Audio Connector Range (20/10/2011 09:28:54)

CLIFF Electronics is expanding their range of internationally renowned audio jack sockets and plugs. In addition to well-established ¼ inch ranges new families of 3.5mm plugs and sockets for professional audio, industrial, consumer and mobile phone applications are now available.

Uprated conversational control cuts cycle times by a third (20/10/2011 09:22:52)

Two Hurco VMX30t vertical machining centres (VMCs) have been added to the subcontract machine shop of Schivo Group in Waterford, on the south coast of Ireland. Compared with a VMX42 installed in 2004, the latest machines are 50 per cent more productive, due entirely to the increased functionality of Hurco's conversational programming software, WinMax, incorporated into the control systems.

WEG CELEBRATES ITS 50th ANNIVERSARY AS A GLOBAL MAJOR IN POWER SUPPLY, DISTRIBUTION, TRANSMISSION, CONTROL & AUTOMATION (20/10/2011 09:18:05)

WEG celebrated its 50th birthday on 16th September 2011. In just five- decades the company has grown from modest beginnings, as a LV motor manufacturer in Jaragua do Sul, Brazil, to a global giant with earnings exceeding US $3 billion. Along the way WEG has evolved from a proprietary supplier of electric motors to become a major global solutions provider of power supply, power distribution, power transmission and turnkey automation systems. This evolution continues apace, underpinned by state of the art manufacturing plants in Brazil, Argentina, China, India, Mexico and Portugal, and sales offices and distributors across 5 continents.

New APR series rotary stages provide high precision, low tilt motion errors and large load capacity (20/10/2011 09:11:20)

Aerotech continues to improve and innovate its direct-drive rotary stage capability with the new APR mechanical bearing series which offers positional accuracy to 1.5 arc-sec and axial load capacity up to 450 kg. Aimed at high precision rotary positioning for applications such as precision component testing, optical calibration systems, laser micromachining and sub-micron metrology, the APR's brushless direct-drive technology easily outperforms traditional worm/wheel stages, delivering considerably smoother and higher speeds, much improved angular precision, with zero backlash and a far superior throughput potential. The range covers seven models in three frame sizes with nominal square footprint mounting dimensions of 150, 200 and 260 mm, offering a clear through-aperture of 50, 75, or 100 mm respectively for electrical or other services such as slip ring assemblies, laser feed or air supplies.

WEAR PROTECTION CAN DELIVER PRODUCTIVITY IMPROVEMENTS SAFEGUARD QUALITY STANDARDS & CUT COSTS FOR FOOD PRODUCERS (20/10/2011 08:57:21)

The food and beverage industry is under constant pressure to increase productivity and maintain standards of manufacture; at the same time as achieving compliance with increasingly stringent legislation. In order to achieve demanding targets, producers are investing in proven technologies that increase production output by eliminating the reactive costs associated with plant repair and downtime.

FLIR thermal imaging cameras help detect material failures in bikes (20/10/2011 08:53:31)

Modern bike frames are made of carbon fibre-reinforced plastics, which is exceptionally light and strong. But the way these frames behave in case of failure is fundamentally different from the old metal frames. Instead of bending, carbon fibre-reinforced plastics break. This exposes riders to dangerous situations; failures can lead to injury or even death.

NEW HIGH PRECISION VOLUMETRIC DOSING RANGE FROM INTERTRONICS (20/10/2011 08:47:48)

Following the recent announcement of their exclusive UK distribution deal for the preeflow dosing brand from ViscoTec, the engineers at Intertronics are delighted to introduce the preeflow eco-PEN series dispensing equipment and matching controllers. These all-electronic systems are ideal for continuous highly accurate dispensing of adhesives, solder pastes, encapsulants, oils, catalysts, etc. in industries such as optics, fibre optics, medical devices, electronics, displays, LEDs and academic laboratories where highly accurate dots, beads or continuous flow are required.

Baldor Motion's e100 Ethernet enhancements benefit Heason Technology system integration (19/10/2011 20:20:05)

As a preferred systems integrator for Baldor Motion, Heason Technology's in-house design and assembly capability benefits from the global motion control leader's versatile e100 intelligent servomotor drive and controller range which continues to expand with additional communication and application development features.

Sudlows powers through for Medway Tunnel (19/10/2011 20:16:45)

Sudlows, has completed a high dependency electrical job for England's first immersed tube passageway, Medway Tunnel. First built in 1996, the Medway Tunnel links the town of Strood with Chatham in Kent and provides vital connecting access to over 40,000 vehicles a day.

WILCOX COMMERCIAL VEHICLES IMPROVES CUSTOMER COMPETITIVENESS WITH NEW LIGHTWEIGHT TRAILER BODIES + EDBRO CX14 TIPPING GEAR (19/10/2011 20:08:42)

Wilcox Commercial Vehicles Ltd, one of the UK's premier aluminium commercial vehicle body builders, is growing its business by offering its customers more, in terms of improved payload, faster tipping, reduced weight and increased reliability, thanks to the adoption of EDBRO's new CX14 tipping cylinder on the company's current generation of lightweight rigid bodies.

Endress+Hauser Announces Instrumentation Package for Wastewater Aeration Control (19/10/2011 20:03:17)

Endress+Hauser announces the Instrumentation for Aeration Control package geared specifically toward advanced aeration control strategies. Instruments available measure dissolved oxygen, nitrate, ammonium, pH, suspended solids, temperature, air flow rates, air pressures and water levels in aeration basins to provide enhanced and reliable control of a process. Direct measurement of these parameters can drastically reduce energy costs associated with operating aeration basins.

Eye Spyraflo, a look at bearing applications... (19/10/2011 19:55:50)

A manufacturer produces a unique, portable reel dispenser that offers a simple and convenient solution to what has traditionally been a tedious and unwieldy task of getting an electric power cord to unwind and rewind in tight and restrictive work areas.

igus takes step towards green bearings (19/10/2011 13:58:03)

Polymer researcher and bearings specialist igus UK has developed a plain bearing material that is based on 54 percent sustainable and natural raw materials. The basic polymer of the new iglidur N54 plain bearing is mainly made of castor oil, rather than finite crude oil. The company's mechanically and tribologically optimised biopolymer is suitable for universal use in the low-load range.

Leading Diesel Engine Manufacturer Perkins Selects solidThinking Inspired for Industrial Engine Structural Optimisation (19/10/2011 13:50:02)

Altair Engineering, Inc.,announced that Global engine manufacturer Perkins has deployed solidThinking Inspired to optimise the design of industrial engine components.

SCHOLARLY RESEARCH LEADS TO JET TOWEL (19/10/2011 13:43:22)

Mitsubishi Jet Towel hand dryers are helping a progressive independent girls' school maintain its commitment to bettering the environment wherever possible.

The latest STABILUS gas springs from SKF give designers flexibility in on- and off-highway applications (19/10/2011 13:40:42)

The latest range of STABILUS gas springs and dampers from SKF, the knowledge engineering company, has been developed to give engineers a wide range of options for designing safe, reliable and cost effective systems for lifting bonnets, hatches, windows and seats. STABILUS gas springs and dampers are constructed for use in the most demanding applications, making them ideal for use in construction, agricultural and forestry machines; are available in a wide choice of configurations, and incorporate a number of innovative features to improve vehicle function and operation.

Landia’s pumps and aerators enhance waste-to-energy plant (19/10/2011 13:38:35)

AirJet aerators and MPTK-I Chopper Pumps made by Landia are helping a major recycling plant in north western Germany maintain and increase the amount of electricity it sells to the national energy grid.

New spring indexing plungers from Elesa with safety rest and security key (19/10/2011 13:28:46)

The humble indexing plunger from standard component specialists Elesa has acquired a new safety rest feature in their GN816 series and has gone further with the addition of a security key. Thus Elesa have ensured that the plunger cannot be inadvertently released when set to the rest position – so protecting the integrity of associated machinery. In addition the GN816B series provide the further security of a separate key needed to extend or release the plunger so that only approved operators may re-set the index.

New digital output sensor option for Gems RotorFlow series (19/10/2011 13:21:34)

Gems Sensors & Controls, a market leader in custom made fluid sensing and control solutions, has introduced the new RotorFlow Output for its RotorFlow Series of fluid flow sensors. The RotorFlow's unique highly visible paddlewheel rotors and solid-state electronics provide accurate flow rate output with visual confirmation when monitoring dynamic fluid flow within fluid lines. This additional output function is compatible with most digital logic units for a range of commercial and industrial machinery and systems.

Catalog Data Solutions BIM Content Management Solution Selected by Taco (19/10/2011 13:16:28)

Catalog Data Solutions (CDS), announced that Taco, Inc. has selected the CDS CAD and BIM Content Management Solution, including its Revit BIM and multiple formats of CAD models. This solution will bring additional capabilities and reach to Taco's management of its growing library of detailed product information.

Thermo Fisher Scientific Launches New Total Nitrogen and Sulfur Analyzer for Precise and Accurate Analysis of Petroleum Products Using a Single Introduction Module (19/10/2011 13:10:33)

Thermo Fisher Scientific Inc., announces the launch of a new Total Nitrogen and Total Sulfur (TN/TS) analyzer, which features an innovative direct injection design providing the capacity to analyze both heavy and light hydrocarbons without changing introduction modules. As a result of the versatility, precision and accuracy offered by the Thermo Scientific iPRO 5000 series analyzer, scientists in petrochemical and commercial testing laboratories, oil refineries, R&D centers and chemical plants, will benefit from significant time savings and productivity advantages, in addition to total ASTM compliance.

UNIVERSALLY ADAPTABLE CONTROL HEADS FOR HYGIENIC PROCESS VALVES IN DECENTRALISED AUTOMATION SYSTEMS (19/10/2011 13:03:16)

Burkert's new 8681 control head has been developed specially for use with pneumatically controlled hygienic process valves in decentralised automation applications. The Type 8681 compliments Bürkert's clean line ELEMENT series of control heads, digital positioners and process controllers, for diaphragm, angle seat, globe, ball and butterfly valves, effectively expanding Burkert's extensive hygienic processing range for the food/beverage and pharmaceutical industries.

Consider your options to prevent burgeoning copper prices eating into profits (19/10/2011 10:29:59)

Metal component manufacturers are bracing themselves amid much speculation of a further dramatic rise in raw material costs. Driven by growing optimism about the global economy and increased worldwide demand for metals, the consensus is that metal prices will continue to soar through 2011, with copper, in particular, expected to reach new highs of close to $11,000 per tonne in the second half of the year.

NetLight SMART ENERGY STREET LIGHT CONTROLLERS PROVIDE FLEXIBILITY FOR ENERGY SAVING DOWN TO INDIVIDUAL STREET LAMPS (17/10/2011 17:22:13)

IDC's new NetLight system of wireless integrated lighting controllers makes street lighting far more energy efficient, flexible, and interactive. The system combines the latest intelligent lighting controls with wireless connectivity, and a remote web browser, to delivery substantial savings in all aspects of street lighting, from initial design to installation, commissioning, energy usage and ongoing maintenance.

Video of the Week – Why you need an igus energy chain (17/10/2011 17:18:53)

Energy chain expert igus UK has specialised in plastic energy chains since 1971 and, through material and technological advancements, is the market leader in this field.

Microfluidic expert launches versatile pump solution offering increased user flexibility (17/10/2011 17:09:53)

Dolomite, a world leader in microfluidic design and manufacture, has introduced the Mitos P-Pump Remote offering a versatile solution for microfluidics, allowing users a seamless way to control their experimental environment. Operating over a wide pressure range of up to 10bar, the Mitos P-Pump Remote is the

Entry deadline approaches for budding entrepreneurs to pitch to leading industry investors (17/10/2011 16:57:49)

Ambitious new tech start-ups, inventors and budding entrepreneurs only have one month left to enter the Cambridge Wireless Discovering Start-Ups 2011 competition and get the chance to pitch to leading venture capitalists, angels and industry investors. Representatives from Microsoft, RIM, Nokia, Vodafone Ventures, Qualcomm Ventures, Innovacom, Broadcom, Orange and ARM are among those lining up to pick the winners and provide expert advice.

IVC expands certified camera line to provide high quality video from hazardous areas at reduced bandwidth. (17/10/2011 16:51:14)

Industrial Video and Control (IVC) expanded their hazardous area product line with the introduction of H.264 cameras designed and certified for use in hazardous areas. IVC now offers Class I Division 1 and Class I Division 2 PTZ dome and ATEX PTZ cameras that support H.264 encoding.

NEW VERSION OF PRACTICAL MACHINERY SAFETY DIRECTIVE GUIDE AVAILABLE FOR FREE DOWNLOAD (17/10/2011 16:48:33)

The latest edition of 'A practical guide to machinery safety', sponsored by Laidler Associates, part of the machinery division of TÜV SÜD Product Service, is now available for free download from the Laidler website.

New multi-turn rotary sensor will provide viable, and enviable, non contacting alternative to wirewound devices (17/10/2011 16:43:21)

Representing a breakthrough in non-contacting and multi-turn rotary position sensing, Novotechnik's new RSM2800 series provides an absolute position output for up to 16 turns (5760 electrical degrees) - and is a true non-volatile device that retains position in an unpowered state.

Cyberhawk shortlisted for Energy Award (17/10/2011 16:40:36)

Cyberhawk Innovations has been shortlisted for the Energy North Awards 2011* (www.energynorth.co.uk ). The nomination in the "Best Service Supply" category has been made by Cyberhawk customer, Scottish & Southern Energy plc (SSE).

HARDWARE ACCESSORIES FOR COMMERCIAL VEHICLES – FROM EMKA (17/10/2011 16:36:32)

A large range of new hardware accessories especially for commercial vehicles has been launched by EMKA in the form of a new "Commercial-Vehicles" brochure which details locks, latches, handles, hinges and gasketing now available for vehicles from horse boxes to railway rolling stock.

Innovative BlockTop Closure System (17/10/2011 16:29:12)

Always at the forefront of innovative packaging solutions Chronos BTH has recently introduced the new BlockTop bag closing system.

Seiki Manufacturing Execution Systems at AeroEngineering 2011 (17/10/2011 15:49:49)

Seiki Systems Ltd will be exhibiting its full range of modular manufacturing execution software (MES) for the first time at AeroEngineering 2011.

New TESEQ CDNE Coupling/Decoupling Network for Emission Testing (17/10/2011 15:44:25)

Tighter specification CDNE for measurement of radio disturbance characteristics meets more of the latest requirements of EN 55015

knitter-switch - Micro-Miniature Pushbutton Switches Are Just 1.48mm High (12/10/2011 21:08:32)

One of Europe's leading switch manufacturers, knitter-switch, just introduced a very small, tactile, pushbutton switch that will find many applications in all types of handheld devices including PDA's and those designed for medical and industrial use.

Low Cost USB Data Acquisition Modules…...Now With Sampling Rates Up To 100 kHz (30/09/2011 15:39:18)

Data Translation announces the release of three new 12-bit USB data acquisition modules for their ECONseries. Multifunctional, economical and easy-to-use, the new DT 9812A, DT 9813A and DT 9814A instruments are twice as fast as existing popular models and boast a sampling rate increase from 50 kHz to 100 kHz. Key features include 8, 16 or 24 analog inputs, two analog outputs (12-bit) with 75 kHz per channel, and up to 16 digital I/O channels depending on the model. A counter/timer allows frequency measurement and continuous pulse output operations. For easy portability, the modules are USB powered.

RITTALS Commitment to Improvement - ISO (30/09/2011 15:36:05)

Rittal's philosophy of quality stands for perfect and efficient manufacturing, professional sales, reliable service and dependable delivery.

Uprated conversational control cuts cycle times by a third (28/09/2011 14:34:12)

Two Hurco VMX30t vertical machining centres (VMCs) have been added to the subcontract machine shop of Schivo Group in Waterford, on the south coast of Ireland. Compared with a VMX42 installed in 2004, the latest machines are 50 per cent more productive, due entirely to the increased functionality of Hurco's conversational programming software, WinMax, incorporated into the control systems.

New APR series rotary stages provide high precision, low tilt motion errors and large load capacity (28/09/2011 14:31:01)

Aerotech continues to improve and innovate its direct-drive rotary stage capability with the new APR mechanical bearing series which offers positional accuracy to 1.5 arc-sec and axial load capacity up to 450 kg. Aimed at high precision rotary positioning for applications such as precision component testing, optical calibration systems, laser micromachining and sub-micron metrology, the APR's brushless direct-drive technology easily outperforms traditional worm/wheel stages, delivering considerably smoother and higher speeds, much improved angular precision, with zero backlash and a far superior throughput potential.

FLIR thermal imaging cameras help detect material failures in bikes (28/09/2011 14:28:58)

Modern bike frames are made of carbon fibre-reinforced plastics, which is exceptionally light and strong. But the way these frames behave in case of failure is fundamentally different from the old metal frames. Instead of bending, carbon fibre-reinforced plastics break. This exposes riders to dangerous situations; failures can lead to injury or even death

New high precision volumetric dosing range from Intertronics (28/09/2011 14:26:40)

Following the recent announcement of their exclusive UK distribution deal for the preeflow dosing brand from ViscoTec, the engineers at Intertronics are delighted to introduce the preeflow eco-PEN series dispensing equipment and matching controllers. These all-electronic systems are ideal for continuous highly accurate dispensing of adhesives, solder pastes, encapsulants, oils, catalysts, etc. in industries such as optics, fibre optics, medical devices, electronics, displays, LEDs and academic laboratories where highly accurate dots, beads or continuous flow are required.

Baldor Motion's e100 Ethernet enhancements benefit Heason Technology system integration (28/09/2011 14:24:27)

As a preferred systems integrator for Baldor Motion, Heason Technology's in-house design and assembly capability benefits from the global motion control leader's versatile e100 intelligent servomotor drive and controller range which continues to expand with additional communication and application development features.

Sudlows powers through for Medway Tunnel (28/09/2011 14:17:55)

Sudlows, has completed a high dependency electrical job for England's first immersed tube passageway, Medway Tunnel. First built in 1996, the Medway Tunnel links the town of Strood with Chatham in Kent and provides vital connecting access to over 40,000 vehicles a day.

Endress+Hauser Announces Instrumentation Package for Wastewater Aeration Control (28/09/2011 14:12:43)

Endress+Hauser announces the Instrumentation for Aeration Control package geared specifically toward advanced aeration control strategies. Instruments available measure dissolved oxygen, nitrate, ammonium, pH, suspended solids, temperature, air flow rates, air pressures and water levels in aeration basins to provide enhanced and reliable control of a process. Direct measurement of these parameters can drastically reduce energy costs associated with operating aeration basins.

igus takes step towards green bearings (28/09/2011 14:10:12)

Polymer researcher and bearings specialist igus UK has developed a plain bearing material that is based on 54 percent sustainable and natural raw materials. The basic polymer of the new iglidur N54 plain bearing is mainly made of castor oil, rather than finite crude oil. The company's mechanically and tribologically optimised biopolymer is suitable for universal use in the low-load range.

Leading Diesel Engine Manufacturer Perkins Selects solidThinking Inspired for Industrial Engine Structural Optimisation (28/09/2011 14:08:33)

Altair Engineering, Inc., a leading global provider of technology and services that empower client innovation and decision-making, announced today that Global engine manufacturer Perkins has deployed solidThinking Inspired to optimise the design of industrial engine components.

Scholarly research leads to jet towel (28/09/2011 14:06:25)

Mitsubishi Jet Towel hand dryers are helping a progressive independent girls' school maintain its commitment to bettering the environment wherever possible. Queenswood School has occupied the same site, Brookmans Park, Hatfield, Hertfordshire, for almost 100 years. Its beauty and tranquillity is believed contributes to the positive energy of the school, the happiness and rounded development of its 400 girls.

Microfluidic expert launches versatile pump solution offering increased user flexibility (28/09/2011 14:03:01)

Dolomite, has introduced the Mitos P-Pump Remote offering a versatile solution for microfluidics, allowing users a seamless way to control their experimental environment.

Landia’s pumps and aerators enhance waste-to-energy plant (28/09/2011 14:01:29)

AirJet aerators and MPTK-I Chopper Pumps made by Landia are helping a major recycling plant in north western Germany maintain and increase the amount of electricity it sells to the national energy grid.

Fast, automated health check for multi-axis machine tools (28/09/2011 14:00:30)

Renishaw's AxiSet Check-Up is a cost-effective solution for checking the alignment and positioning performance of rotary axes. In just a few minutes, users of five-axis machining centres and multi-tasking mill-turn machines can identify and report on poor machine alignments and geometry that can cause extended process setting times, as well as non-conforming parts. The latest release is now available, offering significant new benefits to users.

New digital output sensor option for Gems RotorFlow series (28/09/2011 13:59:10)

Gems Sensors & Controls, a market leader in custom made fluid sensing and control solutions, has introduced the new RotorFlow Output for its RotorFlow Series of fluid flow sensors. The RotorFlow's unique highly visible paddlewheel rotors and solid-state electronics provide accurate flow rate output with visual confirmation when monitoring dynamic fluid flow within fluid lines. This additional output function is compatible with most digital logic units for a range of commercial and industrial machinery and systems.

Catalog Data Solutions BIM Content Management Solution Selected by Taco (28/09/2011 13:57:12)

Catalog Data Solutions (CDS), has announced that Taco, Inc. has selected the CDS CAD and BIM Content Management Solution, including its Revit BIM and multiple formats of CAD models. This solution will bring additional capabilities and reach to Taco's management of its growing library of detailed product information.

New Universally Adaptable Control Heads are Designed for Hygienic Process Valves in Decentralised Automation Systems (28/09/2011 13:55:10)

Burkert's new 8681 control head has been developed specially for use with pneumatically controlled hygienic process valves in decentralised automation applications. The Type 8681 compliments Bürkert's clean line ELEMENT series of control heads, digital positioners and process controllers, for diaphragm, angle seat, globe, ball and butterfly valves, effectively expanding Burkert's extensive hygienic processing range for the food/beverage and pharmaceutical industries.

3-phase DIN-Rail Power Supplies from Powersolve can be ATEX Certified (22/09/2011 08:48:23)

Leading power supply specialist Powersolve just announced a new family of 24VDC output DIN-Rail power supplies designed for 3-phase applications with input voltage ranges from 330 - 440VAC and 410 - 550VAC. Output power is from 240 to 960W.

MicroCare Ensures Clean Operations at Offshore Europe (21/09/2011 16:02:22)

Having introduced some of the best down-hole logging tool cleaning products to the market at Offshore Europe, MicroCare has confirmed that the exhibition was a great success with a number of mining and extraction companies interested in high performance cleaning fluids.

Lightweight Flexible Nylon Foam Unveiled (21/09/2011 15:42:59)

Zotefoams has unveiled a new, lightweight polyamide co-polymer, flexible thermoplastic foam material, ZOTEK NA30, that it claims is suitable for a wide array of automotive applications such as undershields and bonnet liners, engine insulation, air ducting and a variety of die cut and thermoformed spacers.

Unison supports world motorcycle land speed record attempt (21/09/2011 15:41:31)

Unison is helping the Angelic Bulldog Project – an attempt on the world motorcycle land speed record – by creating the roll cage for the streamliner bike. Unison's work included the manufacture of custom tooling to accommodate the unique shape of the bike, together with the bending of various tube sections on a precision all-electric bending machine.

UK Made Custom RF Connectors Delivered in 7 Weeks (21/09/2011 15:39:43)

Intelliconnect (Europe) Ltd the UK based manufacturer of RF connectors offers one of the widest ranges of standard Coaxial, Triaxial and Waterproof connectors available worldwide. In addition, their extensive design experience and UK sourced components allows Intelliconnect to offer an unrivalled custom connector design service.

Two new stroboscopes from SKF offer enhanced features to enable safe machinery inspection in a flash (21/09/2011 15:37:41)

SKF has introduced two new portable, compact, easy-to-use, multi-function Stroboscopes, allowing rotating or reciprocating machinery to be inspected safely and efficiently while in operation. The Stroboscope TKRS 10 and TKRS are high quality instruments, that as well as being ergonomically designed, incorporate unique functions such as the phase shift mode facility, allowing the object of interest to be rotated to the correct position for viewing. As an essential instrument for maintenance technicians, both stroboscopes are useful for operator driven reliability (ODR) programmes.

NVision Helps Orthodontic Company Recalibrate CT Scanner (21/09/2011 15:32:24)

NVision, Inc. recently provided an orthodontic company with the information it needed to recalibrate its CT scanner. The company, an orthodontic supplier, utilized NVision's Engineering Service Division to scan a human skull as part of the verification/inspection process for its in-house CT machine. The scanning results provided by NVision contained all the measurement data necessary for the orthodontic company to recalibrate its CT machine to the highest possible level of accuracy.

ESAB's new fire resistant clothing range (21/09/2011 15:30:35)

ESAB's new FR range of clothing, designed for welders, is now available. From the FR Economy black overall, right up to the Phoenix FR / Leather jacket and trousers: each and every item has been designed and made with the needs of the welding operative to the fore – they have been developed by welders for welders.

New Parker Viking Lite directional control valve is smaller, faster with twice the operating life (21/09/2011 15:28:59)

Parker Hannifin has launched an advanced new range of Viking Lite directional pneumatic control valves that combine high flow rates and fast response in compact, lightweight and robust bodies. The new Viking Lite also features a specially developed valve spool wear compensating system. This minimises friction, to reduce both breakaway forces and actuation pressures, and enables operating life to be dramatically increased by up to 250%, depending on application.

New level switches from Gems is ideal for high volume OEM applications (21/09/2011 15:27:15)

Gems Sensors and Controls has launched the latest version of its proven LS-3 level switches. These small, lightweight and robust devices are ideal for a wide range of OEM and end user applications including small tanks, areas with limited access and fluid systems where low cost, high volume switches are required.

Laidler runs new UCPD courses on Machinery Safety (21/09/2011 15:24:20)

Laidler Associates will be running their University Certificate in Professional Development (UCPD) courses on European Machinery Safety, Electrical Safety and the newer Functional Safety Standards this Autumn. The first one is due to take place on the 17th October 2011 at the Ramada Hotel, Solihull.

Cranes for Flexible Manufacturing Selected by Siemens (21/09/2011 15:22:59)

To optimise material flow at their new Leeds manufacturing site, the Mechanical Drives division of Siemens Industry Automation and Drive Technologies turned to Street Crane Company for crane systems to meet their complex handling needs.

Altair Releases Student Edition of Its Popular HyperWorks Computer-Aided Engineering Software Suite (21/09/2011 15:20:43)

Altair Engineering, Inc. has announced the release of the HyperWorks 11.0 Student Edition, a personal academic version of the popular suite of computer-aided engineering (CAE) software used by manufacturers around the world.

NUM at EMO - The World of Metalworking, Hannover 19-24 September 2011, Stand C25 (21/09/2011 15:18:58)

NUM is currently celebrating 50 years of technical innovation. Its technology underpins many of the world's most successful specialist machine builders, and today the company views continued innovation and customisation of CNC as crucial to the maintenance of a healthy machine tool sector.

Cosaf expand HVAC offering with new London office (21/09/2011 15:17:24)

In a decision to provide a more comprehensive approach for clients, Cosaf have expanded their service offering to include a Central London office based at 81 Oxford St.

Cortus closes new round of investment to fund three year development plan (21/09/2011 15:16:15)

Cortus S.A. announces the closure of a funding round. The investment from financial partners Credit Agricole Entreprises and Banque Dupuy de Parseval and institutional partners OSEO and the Region of Languedoc-Roussillon focus on international expansion and development.

NEW LABORATORY FUME EXTRACTION SYSTEM FROM FLEXTRACTION (20/09/2011 17:31:11)

The new Fumex ME extraction system for either ceiling with a reach up to 2000mm or table mounting from Flextraction Ltd, supplier and manufacturer of Local Exhaust Ventilation (LEV) products and the UK and Ireland representative for the Swedish based local fume extraction equipment manufacturer Fumex AB, is designed for use in laboratories, education facilities, electronics industry and similar environments.

SPLIT CABLE ENTRY FRAMES (20/09/2011 17:26:49)

The versatile icotek cable entry system available from M Buttkereit Ltd has been extended to include the new KEL 183 series. This product features a split black Polyamide frame assembly for ease of both initial cable assemblies as well as simple accommodation of additional cabling and general retro fitting applications.

Analytical Technology Secures New Framework Agreement with Thames Water Continuing to Lead the Way in Supplying Monitoring Systems to the UK’s Major Utility Companies (20/09/2011 17:20:41)

Specialist electrochemical sensor manufacturer Analytical Technology Inc. announces that it has been awarded the framework agreement to supply and install triple validated chlorine monitoring systems to Thames Water. The new chlorine monitoring systems will replace Thames' existing instrumentation, improving process control and enabling considerable operational and maintenance savings in line with current company strategy. The new framework agreement reinforces Analytical Technology's position as a leading provider of water monitoring instrumentation to many of the UK's largest utility companies.

Minuteman Launches PRO-LCD UPS As Latest In Popular PRO Series (20/09/2011 17:11:32)

Para Systems, Inc., announces the release of the Minuteman PRO-LCD series, a new line of uninterruptible power supplies (UPS) designed to provide fail-safe protection from all power anomalies for small to medium-sized telephone, security and server systems.

High load ratings combined with small bore sizes (20/09/2011 17:08:58)

The new angular-contact ball bearings from the TAC-SHR series were specially developed for use in ball screws. Although they have smaller bore sizes than the existing TAC-HR series, they boast the same load carrying capacity. This means they permit machine manufacturers to produce more compact constructions.

New Chatillon Model DFX II, DFE II and DFS II force gauges are fully backward compatible (20/09/2011 17:05:15)

Bluetooth communication and full-colour displays are among the features of the new series of Chatillon DFX II, DFE II and DFS II digital force gauges introduced by AMETEK Test & Calibration Instruments. The new models span the full range of handheld and stand-mounted force gauge applications from the simplest "Go-No Go" to the most sophisticated quality control. This allows users to purchase the specific force measurement capabilities they need to meet any quality assurance and regulatory requirements.

New Calibrator for Temperature Flow & Pressure (19/09/2011 15:59:01)

Quantitech has launched a new hand-held calibrator; the TCR Tecora Flowcal, which has been developed to enable the fast, accurate calibration of high volume air samplers.

Magma Congratulates Winners of the MUSIC India 2011 “Best Paper” Awards (19/09/2011 15:56:37)

Magma Design Automation Inc. has announced the "Best Paper" winners for MUSIC – Magma Users Summit on Integrated Circuits held here on September 7. Over 200 Magma users attended the annual event that featured 11 papers, a keynote by Balajee Sowrirajan, director of IC Engineering in the OMAP Business Unit at Texas Instruments, and a presentation given by Magma CEO Rajeev Madhavan.

Intertronics new exclusive UK distributor for preeflow dispensing equipment (19/09/2011 15:54:55)

High precision accuracy and repeatability in dispensing is becoming ever more important across the industrial world. Consequently a new exclusive UK agreement for those clever people at Intertronics to distribute preeflow volumetric dispensing/dosing equipment from ViscoTec was greeted with great enthusiasm all round.

PoE+ PSE Single Port Magnetic Jack from Molex (19/09/2011 15:51:28)

Molex Incorporated has developed the first single port PoE+ Power Source Equipment (PSE), single port magnetic jack in accordance to the IEEE802.3at standard. Based on the RJ45 jack and backwards compatible with the previous PoE IEEE802.3af standard, the PoE+ PSE single port magnetic jack, series 85759, is a complete, plug-and-play module that provides engineers with a simplified design process and easy migration path from using standard power supplies to fully integrated PoE+ capability.

ISA Announces Installation, Operations and Maintenance Track at ISA Automation Week 2011 (19/09/2011 15:46:47)

The International Society of Automation (ISA) announced today the sessions of its Installation, Operations and Maintenance Track at ISA Automation Week 2011: Technology and Solutions Event. The conference will take place in Mobile, Alabama, USA, 17-20 October 2011, at the Arthur R. Outlaw Convention Center.

Simufact Opens Training Center in China to Support the Integration of Simulation in Manufacturing Processes (19/09/2011 15:44:15)

Simufact Engineering GmbH has signed an agreement with the Shenyang Ligong University under which the two signing parts will open a training center at the university's facilities in China.

RITTALS Commitment to Improvement - ISO (19/09/2011 15:38:42)

Rittal's philosophy of quality stands for perfect and efficient manufacturing, professional sales, reliable service and dependable delivery.

TÜV Certifies Mechatrolink Network Safety Protocol (19/09/2011 15:37:06)

The Mechatrolink Members Association (MMA) announced that its Mechatrolink motion control network meets industry safety standards. Certification was received after an independent third party, TÜV Rheinland, confirmed that these specifications satisfied the requirements of IEC61508 safety integrity level SIL3

Fluke introduces the 750 Series Documenting Process Calibrators (19/09/2011 15:30:55)

Fluke has introduced the Fluke 750 Series Documenting Process Calibrators. Process professionals have long relied on the Fluke 743/744 Documenting Process Calibrators for advanced instrument calibration, especially in rugged environments. Operating the new 750 Series is similar enough to the 743/744 that existing users will be able to immediately start using the 750 Series – no training required to get substantially increased performance from the new models.

Electrolube Gets under the Bonnet of the Motor Manufacturing Industry (19/09/2011 15:27:55)

With benefits like the car scrapping incentives haven taken place car sales have seen an increase globally; this move has resulted in an increased demand for products from Electrolube, a leading electro-chemical company.

Global Steel Company Saves Energy, Replacement Steam Traps And Maintenance With Thermal Energy International's GEM Steam Traps (19/09/2011 13:43:39)

A major global steel company, based in India, is saving on energy, replacement steam traps and maintenance after replacing its thermodynamic traps with Thermal Energy International's GEM venturi orifice design. Following successful bucket tests on drip legs, Thermal Energy International's Indian agent, Hyderabad based Zenith Marketing & Consultants, has installed 400 GEM traps throughout the plant.

DB9 USB to Digital Modules Introduced by FTDI (16/09/2011 15:59:10)

Future Technology Devices International Limited (FTDI) has added a series of USB to digital level interface modules, in DB9 form factors, to its product portfolio. The new DB9-USB-D3-F (3.3 V output female connector), DB9-USB-D3-M (3.3 V output male connector), DB9-USB-D5-F (5 V output female connector) and DB9-USB-D5-M (5 V output male connector) enable implementation of USB interconnection into legacy equipment without the need for alteration of the enclosure or for any noticeable increase in the overall bill of materials.

Altair Engineering Expands solidThinking Subsidiary Leadership Team in Europe (16/09/2011 15:57:52)

Altair Engineering, Inc., announced that it has appointed Cosimo Panetta to European Managing Director of its wholly owned subsidiary, solidThinking, Inc. In this newly created role, Cosimo Panetta will oversee the EMEA market strategy and channel development of its conceptual design and styling software product offerings, solidThinking and solidThinking Inspired.

Swarf Vaccuum unit benefits mass-production sawing of bearing races (16/09/2011 15:54:40)

German sawing machine builder, Kasto, recently delivered a turnkey production process to a bearing manufacturer for cutting off short lengths of stock from thick-walled, 100Cr6 steel tube of 677 N/mm² tensile strength to produce bearing race blanks. It was a particularly exacting circular sawing application, as Kasto's UK subsidiary in Milton Keynes describes below.

Gems introduces new tough metal electro-optic liquid level sensor (16/09/2011 15:53:23)

Gems Sensors & Controls has introduced a new compact, durable, and low cost Electro Optic Level Sensor (ELS) for liquid level sensor applications. The ELS 950M expands on the existing ELS 950 Series and will benefit OEMs and end users in a wide range of industries and environments.

Two Axis, Linear Motion nanopostiioner provides 1NM resolution with up to 160 x 160 MM travel (16/09/2011 15:51:17)

A series of linear dual-axis stages offering nanometer-level performance in travels up to 160 x 160 mm has been introduced by Aerotech. The new ANT130-XY stages allow travel in two dimensions with an exceptionally low profile of 85 mm. With high resolution (1 nm), repeatability (75 nm) and accuracy (250 nm) per axis, the stages support all applications that require nanopositioning performance with extreme in-position stability and smooth motion.

Creaform Launches the MaxSHOT 3D Optical Coordinate Measuring System (16/09/2011 15:49:39)

Creaform, is very proud to introduce the latest addition to the wide range of technologies it develops and manufactures, the MaxSHOT 3D optical coordinate measuring system

TDK-Lambda extends its digitally-controlled EFE series power supplies warranty to 5 years (16/09/2011 15:45:48)

TDK-Lambda UK, has extended the warranty period for all its digitally-controlled 300-400W EFE-M and EFE series power supplies, which comply with medical and/or industrial safety specifications, from 3 to 5 years.

University invites businesses to the future of manufacturing (16/09/2011 15:44:39)

Launches on Friday 16 September, CALM (Centre for Additive Layer Manufacturing) enables businesses, entrepreneurs and researchers to harness the potential of '3D printing'. The centre is offering heavily subsidised rates to SMEs in Devon, Dorset, Wiltshire and Cornwall, giving smaller businesses access to world-class facilities at affordable prices.

VICTREX launches a new online resource focused on pipe and tubing extruded from VICTREX PEEK polymer (16/09/2011 15:41:57)

As an extension of the recent launch of its VICTREX Pipes product family, Victrex Polymer Solutions the world's leading manufacturer of high performance polyaryletherketones (PAEK), has announced its new microsite, www.victrexpipes.com. As pipe applications are required to perform in increasingly demanding conditions engineers are challenged to develop solutions that offer enhanced performance. To do so, they are searching for new online resources that offer innovative material solutions and quick access to experts that can solve their pipe application development needs.

Rising metal prices need not mean increased costs (16/09/2011 15:40:40)

In recent weeks the headlines have been awash with reports of a decline in the price of copper following the catastrophic earthquake and tsunami in Japan in early March. The economic impact of the natural disaster has been made worse by the current crisis in the Middle East and North Africa, as well as Japan's nuclear leaks, causing instability in international markets as traders find it unrealistic to keep pressing at the ever higher prices that we have seen so far this year.

Parker Filtration launches industry’s first condition monitoring iPhone App (16/09/2011 15:36:34)

The Filtration Division of Parker Hannifin has released the industry's first condition monitoring app as a free download from the iTunes appstore. Parker Hannifin Hydraulic Filter Division Europe's ConMon app features two unique programs that will enable users to measure the degree of filtration required for their systems, and the frequency at which fluids should be tested, via their iPhone, iPad or iTouch. The app offers a new, swift and convenient way to ensure that hydraulic oil and fuel systems are safe from contamination, reducing the costly delays caused by equipment failure and downtime.

SKF DryLube Bearings bring benefits to a wide range of high temperature applications (16/09/2011 15:34:22)

SKF has announced the availability of the SKF DryLube Bearing, a new bearing solution that contains a specially engineered graphite mixture, eliminating the need for grease re-lubrication; delivering reliable, improved performance and allowing significant cost savings to be made in reduced maintenance and downtime. The SKF Drylube Bearings will benefit equipment, such as rollers, which are repeatedly subjected to extremely high temperatures in applications such as bakeries, food processing, mills, foundries, or other heavy industries.

Jodrell Bank gets the star treatment from Sudlows (16/09/2011 15:32:37)

MANCHESTER and London based business infrastructure specialist, Sudlows, has installed a new integrated network system for the world famous Jodrell Bank Observatory.

Cortus Awarded Siemens France 2011 Grand Prix for Innovation, in the Category Town of Tomorrow (16/09/2011 13:04:37)

Cortus has been awarded the Siemens France 2011 Grand Prix for Innovation in the Category Town of Tomorrow for their innovative, low power, high performance APS3 processor for the embedded systems of today and tomorrow. For the next year Cortus will benefit from the sponsorship and mentoring of Siemens France.

Guide to Selecting an IR Camera for R&D Applications (16/09/2011 13:02:59)

Drawing upon over 50 years experience of designing and supplying thermal imaging cameras for Research and Development applications - FLIR Advanced Thermal Solutions have developed an informative new guide entitled '7 Things to Know When Selecting an IR Camera for Research & Development'.

KINGFISHER ACHIEVES BOTH IN-HOUSE & ON-SITE COMPLIANCE FOR ITS WEAR PROTECTION OPERATIONS AT ANNUAL IMS AUDIT (15/09/2011 16:19:25)

Kingfisher Industrial, has just passed its annual integrated management system (IMS) audit with flying colours, maintaining its registration to three key management standards: ISO 9001:2008, ISO14001:2004 and OHSAS18001:2007 that underpin the company's quality and environmental commitments to customers.

New Series of 1 mm Pitch Timing Belt Pulleys from SDP Suited for Miniature Applications (15/09/2011 16:13:38)

A new series of 1 mm pitch timing belt pulleys from Stock Drive Products (SDP) (ISO 9001:2000 Registered Manufacturer) are designed for miniature applications. The metric pulleys, identified as the A 6A18M... Series are stocked in 17 different sizes ranging from 18 to 75 grooves. These are the smallest standardized pitch timing pulleys available anywhere, an important option to consider when trying to miniaturize your product design for prototype or production application.

MicroCare Corp. Introduced the Latest Benchtop Cleaning Products (15/09/2011 16:12:24)

With innovative chemistries and production aids engineered for manual cleaning of circuit boards, MicroCare Corporation introduced its new additions to the Asian Market at Nepcon South China.

Bearings for Use in Ball Screws (15/09/2011 16:10:47)

Angular-contact ball bearings of BSBD Series as a compact single unit Ball screws are responsible for precise positioning in modern machine tools. The moving components need highly exact ball bearings to achieve this. Multiple-row angular-contact ball bearings have proved invaluable here. As one of the world's leading manufacturers of both ball screws and bearings, NSK has the systems expertise to continuously optimise the performance and precision of these drives.

IDAC’s Free Simulation Open Day (15/09/2011 16:08:51)

IDAC is opening its doors to the engineering community free of charge on 26th April 2012. This is an opportunity for you meet IDAC's computer aided engineering (CAE) simulation experts and ask questions about your specialist fields.

Gems Sensors and Controls launches precision magnetostrictive level sensors (15/09/2011 16:05:36)

Gems Sensors and Controls, has launched an innovative range of magnetostrictive level sensors. The new XT-1000 sensors have been designed for use in a wide range of OEM and end user applications, providing continuous operation with extremely high levels of precision and reliability.

FMC Technologies first to use SharePoint-based Engineering Document Management and Control in the Cloud (15/09/2011 14:49:24)

Cadac Organice Cloud Solution allowed FMC Technologies to implement a flexible platform in a timely manner that fully met their requirements

Visit Edbro on stand 3070D at this year’s RWM Exhibition (15/09/2011 14:46:41)

Hydraulic tipping gear specialists, Edbro, will be on hand at this year's RWM exhibition to discuss its products and services. Since developing the world's first hydraulic tipping cylinder in 1916, Edbro has led the market in increasing payloads, reducing tipping times and improving safety. Having produced over 1,000,000 cylinders, the company is able to provide support for almost any tipping application.

Extensive Range of MIL Spec Power Modules available from Powerstax (15/09/2011 14:42:41)

Powerstax, one of Europe's leading application-rich power solutions specialists, announces the availability of its PX range of competitively priced, high reliability MIL standard DC:DC converters and pre-regulator, filter and hold-up modules. Tim Worley, CEO of Powerstax comments; " Our PX range of power modules offers designers one stop shop for complete board level power solutions."

Ground Crewws Talk Sense On Generator Maintenance (15/09/2011 14:29:44)

Aircraft servicing times are being reduced, enabling more flying hours, thanks to a new fully automatic generator testing station developed by MEL Aviation in Sudbury, Suffolk.

ISA Announces Analyzers Track at ISA Automation Week 2011 (14/09/2011 12:12:27)

The International Society of Automation (ISA) announced today the offerings of its Analyzers Track at ISA Automation Week 2011: Technology and Solutions Event, which will take place in Mobile, Alabama, USA, 17-20 October 2011, at the Arthur R. Outlaw Convention Center. The Analyzers Track provides up-to-date information on the use of process analyzers for both environmental and process monitoring and control.

TDK-Lambda adds 24V input DC-DC module to its CN-A family (14/09/2011 12:09:12)

TDK-Lambda UK has added a 24Vdc input series to its CN-A family of railway DC-DC power modules. A robust, quarter-brick 100W power module, the CN100A24 is compliant with the applicable railway standards, and its high-reliability design affords a long warranty period of 5 years.

Meggitt Sensing Systems releases Wilcoxon Research side exit accelerometer with built in temperature sensor (14/09/2011 12:08:02)

Meggitt introduces a new side exit, low profile, dual output accelerometer with a built-in temperature sensor. The 787T is the side exit version of Wilcoxon Research's extremely popular 786T top exit, combined output, temperature and vibration general purpose sensor.

All American Semiconductor offers S-Force fan from EBM-PAPST (14/09/2011 12:06:13)

All American Semiconductor is distributing the S-Force series of compact fans from ebm-papst Inc., the world's leading manufacturer of fans and motors.

Boker’s Now Offers Standard Washers in Numerous Sizes, Materials and Quantities (14/09/2011 12:05:12)

Boker's, Inc announces their comprehensive washer offering includes standard washers in multiple sizes and materials, providing ideal solutions for versatile fastener industry applications. With the company's extensive manufacturing capabilities and increased washer capacity, Boker's offers standard flat washers in short, medium and long runs, with outside diameters ranging from 0.081 inches to 5.000 inches, plus numerous inside diameter and thickness options.

ESAB increases investment in hybrid laser arc welding (14/09/2011 12:02:24)

ESAB has completed the purchase of the Master Process Controller (MPC) from Applied Thermal Sciences Inc (ATS) for use in its Hybrid Laser Arc Welding (HLAW) process

New Felten OEE-Lite Enables Companies on Limited Budgets to Monitor & Analyse Production Performance Without Full MES (14/09/2011 12:01:03)

Products4Automation's new PILOT OEE-Lite, from production intelligence specialist, FELTEN is a small, low cost, highly functional OEE module that enables organisations on limited budgets to monitor their production performance without having to spend excessive amounts on full MES solutions.

MAPAL optimises machining for large parts (14/09/2011 11:58:47)

In response to the rapidly increasing demand for accurate and dependable machining of large parts, precision cutting tool expert MAPAL has developed two new approaches to tool design. The first uses welded construction to reduce tool weight, while the second relies on the use of carbon fibre reinforced polymer (CRFP) tool extensions not only to reduce weight but also to enhance machining accuracy.

Creaform Reveals New HandyPROBE Arm-Free Optical CMM (14/09/2011 11:57:38)

Creaform, unveiled its new HandyPROBE arm-free and portable optical CMM system.

Accustream boosts CML alloys waterjet capability (14/09/2011 11:54:45)

Wightman Stewart has supplied a turnkey waterjet system to CML Alloys that includes an Accustream AS Series intensifier and diamond cutting heads, a WARDJet waterjet cutting table and twin screen CNC controller.

Cadac Organice first to introduce SharePoint-based Engineering Document Management in the Cloud (14/09/2011 11:53:20)

Cadac Organice BV, is first to introduce SharePoint-based Engineering Document Management and Control in the Cloud. With the new Cadac Organice Cloud Solution, companies benefit from full Engineering Document Management and Control functionality on a hosted SharePoint environment.

Versatile Tension/Compression Load Cell is Best Seller for LCM Systems (14/09/2011 11:51:02)

The DCE load cell from LCM Systems provides design engineers with a small and versatile product for measurement of tensile and compressive forces. Applications include product testing for tensile strength, tension measurement and general force applications.

Haydon Kerk Motion Solutions Introduces the IDEA™ Stepper Motor Drive Module with RS-485 Communication Protocol (14/09/2011 11:46:40)

The IDEA stepper motor drive platform now has the capability of communication using an RS-485 data protocol. The RS-485 protocol overcomes the limitations of other drive communication methods making the RS-485 IDEA drive module perfect for industrial applications.

igus drylin SLW Stop-and-Go (14/09/2011 11:45:33)

The SLW range from linear expert igus UK comprises a standard drylin W slide which is adjustable via a leadscrew for precise movements. The latest addition to this range is the SLW Stop-and-Go.

Supply and install success for Börger Pumps at Flag Fen (14/09/2011 11:42:05)

Börger has completed the supply and installation of its PL300 Rotary Lobe Pumps to handle a demanding sludge application at the 5.6 hectares Flag Fen WWTW in Peterborough.

Plugs and sockets meet military application requirements (13/09/2011 15:17:12)

CEE Norm has expanded its range of plugs and sockets with a full suite of products designed for military applications. The products are offered in military style 'green' (RAL 6031-FP), and cover currents from 16A to 125A in a variety of voltages. Standard earth pin positions prevent the possibility of connecting items of different voltages or frequencies by mistake.

NEW HIGH-SPEED BALL SCREWS RUN EXTREMELY QUIETLY (13/09/2011 14:49:44)

The machine tool industry is placing ever-increasing demands on linear drive systems in regards to traverse rates, precision, and quiet running. NSK is responding to this trend – with the new HMS series of ball screws, which will be presented at the EMO trade fair.

Improved production processes ensure interchangeability (13/09/2011 14:47:30)

High precision despite combinable carriages and rails: this is the key advantage of a new series of linear guides. This innovation is made possible by optimised production processes for the guide rails. NSK will be showcasing the PH series – which provides highly precise linear movements in machine tools – at the EMO trade fair.

Sofraser expands its MIVI viscometer capabilities (13/09/2011 14:46:21)

With new, high-pressure capabilities working up to 500 bar, Sofraser continues to broaden the application field of its MIVI viscometer, which technology is a rod vibrating at resonance frequency.

Record-breaking year for STEMMER IMAGING (13/09/2011 14:44:41)

STEMMER IMAGING has announced a massive increase in turnover for the financial year ending 30th June 2011. Total turnover for the four STEMMER IMAGING companies, headquartered in Germany, exceeded 55 million Euros - a rise of more than 50% on the previous year. In the UK, turnover showed an impressive rise of nearly 40% compared to 2010.

Safety Stats Point To Benefits Of Cranes (13/09/2011 14:41:44)

The latest statistics from the HSE, for the year ending April 2010, expose yet again the need to avoid manual handling and give more credence to calls for wider use of vehicle mounted cranes and other load handling devices. The figures show that across all industries thirty one percent of all fatal, serious and over-three-day injuries during the last reporting year were related to manual handling. This represents 37000 people whose lives have been directly affected.

INDUSTRY LEADER WELCOMES APPRENTICESHIP REFORMS (13/09/2011 14:40:52)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), welcomes the Government's plans to make it easier for firms to engage in apprenticeship training.

AEROSPACE SUBCONTRACTOR STRENGTHENS 5-AXIS MACHINING CAPABILITY (13/09/2011 14:38:32)

In 2005, Midland Aerospace installed its first 5-axis machining centre from DMG, a DMU 70 eVo. The Sutton-in-Ashfield subcontractor now operates six machines from the same supplier for fully interpolative, 5-axis prismatic metalcutting, as well as a CNC lathe.

KMT to promote ultra-high pressure waterjet cutting at EMO (13/09/2011 14:35:00)

KMT will demonstrate its new STREAMLINE PRO 6,200 bar (90,000 psi) water jet technology on its stand at EMO, emphasising the significant increase in piercing and cutting efficiency compared with using 4,100 bar, which until recently was the industry maximum.

Seaward cooks up safety test success at leading catering manufacturer (13/09/2011 14:30:54)

The standard of electrical safety testing at one of the world's leading producers of commercial catering equipment has been improved thanks to the advanced ClareHAL 104 from Seaward.

Industrial solutions company reports record growth of over 100% (13/09/2011 14:28:49)

Despite setting up in business on the verge of recession, Motion29, an industrial safety and connectively solutions company, based in Wales, has announced that it has more than doubled its turnover in the last four years; a refreshing change from the usual doom and gloom concerning British commerce.

Brevini Power Transmissions at Offshore Europe 2011 Stand 1D38 (13/09/2011 14:20:36)

Brevini Power Transmissions, is displaying at the 2011 Offshore Europe exhibition on stand 1D38. Its dedicated sales team will be on hand to provide advice and information on its wide product range designed for the offshore industry.

Mini videoscope from Ultrafine monitors confined spaces (13/09/2011 14:18:33)

The new Ultracam mini videoscope from Ultrafine Technology is a miniature video camera for the inspection of difficult to access areas.

Premium Product Packing (13/09/2011 14:17:32)

A Chronos BTH high accuracy Bottom-Up Filling system has been selected to pack whey permeate powder at a new facility in Devon.

Toroidal Mirrors Provide Pinpoint Focusing (13/09/2011 14:15:43)

Benefiting from considerable expertise in manufacturing high performance parabolic reflectors, Optical Surfaces Ltd. has established itself as a leading supplier of top quality plano-convex and plano-concave toroidal mirrors for spectroscopic and imaging applications.

ESAB Sponsors DVS Congress 2011, Hamburg (13/09/2011 14:12:40)

ESAB, is sponsoring the DVS Congress 2011, which takes place in Hamburg, Germany, from 27-29 September 2011. Alongside the annual Congress will be the DVS Expo exhibition, which is a new innovation for 2011.

Powerstax appoints new Director of Sales for EMEA (13/09/2011 14:09:39)

Powerstax, announces the appointment of a new Director of Sales, EMEA. Rob Hill is returning to the UK from the USA, where for the last six years he has held a number of senior posts in the power industry, to take up this new role.

Landia’s energy efficient mixers tilt towards success (13/09/2011 14:06:59)

Landia have completed a major mixer and pump installation for the first of two new 40m diameter, 6m deep tanks at Hedensted Central Waste Water Treatment Plant in Denmark.

Model # MMP TM57-12V GP52-124, a newly released 12V DC Planetary Gearmotor. (13/09/2011 13:58:47)

The fully reversible Gearmotor is totally enclosed, creating an "IP-54" Sealed Assembly, suitable for use in many harsh environments.

Atlas Copco compressors form integral part of world’s first liquid air energy storage plant (13/09/2011 13:49:51)

Energy-efficient Atlas Copco compressors are a vital part of an innovative cryogenic process developed by Highview Power Storage to store off-peak electric energy by liquefying air.

Six German Machine Tool Manufacturers To Be Promoted On One Stand (12/09/2011 14:41:42)

The very best in 3- to 5-axis machining centres, advanced mill-turning lathes and industrial cleaning machines will be promoted on the Geo Kingsbury Machine Tools stand at Aero Engineering 2011.

Glittering Engineering Careers Begin in Yorkshire (12/09/2011 14:39:02)

For the third year running, Scarborough's leading precision engineering companies are organising a fun event aimed at teenage students considering careers in engineering. Scarborough Engineering Week 2011 takes place at The Scarborough Spa from the 10th to 12th of October. Exhibits include innovative engineering from the past and present - and hopefully the future as well. For instance, there will be a wooden 1920s coach - rebuilt by apprentices - a modern Formula 1 racing car and speedy JCB Fastrac off-road vehicles, plus a preview of the 'Angelic Bulldog' motorcycle that's being built to try and break the world land speed record.

Extended servomotor lead times are not a problem for Kollmorgen (12/09/2011 14:14:56)

Deliveries of the AKM Synchronous servomotors from Kollmorgen are now down to only four weeks lead time due to capacity being increased by one third. In spite of considerable growth of the AKM range, the factory has reduced its lead times and thus is able to help its customers to realise additional competitive benefits. Machine builders can now deliver faster, and machine users will benefit from shorter service times.

True Color Sensor BFS 33M: When things get really colorful (12/09/2011 14:10:43)

With their new BFS 33M color sensor Balluff introduces a true-color sensor of the highest class. No matter what kind of objects you show the sensor, it can discriminate them all with unerring accuracy. Even the slightest shades, smallest gray level differences or minimal changes to the surface properties are detected without effort.

Engineers find leaky pipes with Artificial Intelligence (12/09/2011 14:09:18)

University of Exeter engineers have pioneered new methods for detecting leaky pipes and identifying flood risks with technologies normally used for computer game graphics and Artificial Intelligence. These techniques could help to identify water supply and flooding problems more quickly than ever before, potentially saving people from the traumatic experience of flooding or not having water on tap.

ISA Announces Automation and Control System Design Track at ISA Automation Week 2011 (12/09/2011 14:03:40)

The International Society of Automation (ISA) announced today the sessions of its Automation and Control System Design Track at ISA Automation Week 2011: Technology and Solutions Event, which will take place in Mobile, Alabama, USA, 17-20 October 2011, at the Arthur R. Outlaw Convention Center. This track will present new technologies, methods and applications as they relate to the design of automation and control systems.

Samsung Taps Spreadtrum as Baseband Supplier for High Performance TD-SCDMA Smartphone (12/09/2011 14:01:41)

Spreadtrum Communications, Inc. has announced that its newest TD-SCDMA baseband chip, the SC8802G, is shipping in Samsung's top-of-the-line GALAXY S II smartphone targeting China Mobile subscribers.

ISA Announces Energy Track at ISA Automation Week 2011 (12/09/2011 13:57:27)

The International Society of Automation (ISA) announced today the sessions of its Energy Track at ISA Automation Week 2011: Technology and Solutions Event. The conference will take place in Mobile, Alabama, USA, 17-20 October 2011, at the Arthur R. Outlaw Convention Center. The Energy Track offers a spectrum of presentations on recent advances in automation for buildings, industrial plants and power plants.

Near Infrared Camera for High End R&D Applications (12/09/2011 13:52:09)

FLIR's new SC7100 Near Infrared (NIR) camera is designed to satisfy the requirements of a wide range of science and research applications. Its design makes it the only fully integrated camera offering coverage of the spectral range of 0.4µm to 1.7µm that combines high performance thermal imaging and non-contact temperature measurements with superior data acquisition capabilities. While most competitive NIR cameras are simply thermal imagers, the SC7100-NIR provides accurate non-contact temperature measurements.

Electrolube Shares its Expertise on the Conformal Coating Process at Productronica (12/09/2011 13:48:47)

Leading electro-chemical manufacturer, Electrolube will be educating visitors to Productronica on the conformal coating process when they hold a consultancy program as part of the DIMA stand.

Any old thermal imaging camera buys 20% discount (12/09/2011 13:44:24)

Thanks to the increasing affordability of the technology, thermal imaging is reaching a much wider audience than ever before. And as the camera users gain experience they naturally become more discerning. They understand the importance and value of better image quality and dedicated features that allow inspection to be conducted quicker and with greater efficiency.

Toroidal Mirrors Provide Pinpoint Focusing... (12/09/2011 13:41:57)

Benefiting from considerable expertise in manufacturing high performance parabolic reflectors, Optical Surfaces Ltd. has established itself as a leading supplier of top quality plano-convex and plano-concave toroidal mirrors for spectroscopic and imaging applications.

TDK-Lambda extends its reach in the Irish market (08/09/2011 12:52:17)

With the signing of a franchised distribution agreement with Futura Electronics, power supply manufacturer TDK-Lambda Corporation, a group company of TDK Corporation, significantly extends its reach into the Irish market.

Altair Announces CFD Technology OEM Partnership with Intelligent Light (08/09/2011 12:50:51)

Altair Engineering, Inc., has announced that it has completed an agreement with Intelligent Light, to integrate the full version of Intelligent Light's FieldView 13 post-processor directly into Altair's AcuSolve computational fluid dynamics (CFD) solution.

Intelligent rack monitoring with environmental control - from EMKA (08/09/2011 12:47:00)

EMKA of "everything but the enclosure" fame have developed their Electronic Locking and Monitoring Program with the introduction of their new RMS490 Rack Management System in a standard 1U 19" format which is designed to fulfil all the needs of power and environmental management in high density cabinets such as server centres.

Space tight, turn right - the Stealth RS gearbox is just right (08/09/2011 12:44:22)

The Stealth Advanced RS right angle planetary gearhead delivers the high performance features of the STEALTH RS in a compact, right angle package. With seven frame sizes and 9 gear ratios to choose from, customers are guaranteed to find a gearhead to fit most stepper and servo motor applications.

Aerotech strengthens French and European Sales Team with Gilles Duplessy appointment (08/09/2011 12:42:08)

Aerotech the global motion control systems designer and manufacturer has further strengthened its European sales and support network with the recent appointment of Gilles Duplessy as its new Regional Sales Manager for the French market.

Molex Showcases High-Speed Interconnect Solutions at ECOC 2011 (08/09/2011 12:39:20)

Molex will demonstrate and showcase a wide range of innovative fibre optic interconnect solutions and complete sub-systems optimised for high-speed communications at ECOC – the largest European optical communications event and the meeting place for everyone in the fibre optic communication technology industry.

Flex Sensor provides low-cost angular displacement measurement (08/09/2011 12:36:52)

Variohm EuroSensor has introduced a new low cost angle displacement sensor from Spectra Symbol, the USA based leader in membrane sensing technology, that registers a resistance change depending on the amount of bend radius induced in the sensor. Currently used in applications as far reaching as finger location for gaming gloves to displacement sensing in fitness equipment, the single-piece Flex Sensor provides a cost competitive, compact and altogether elegant position sensing solution where a bending motion is applied to a device.

STEMMER IMAGING To Distribute APG Range of Camera And Lighting Enclosures In Europe (08/09/2011 12:35:55)

STEMMER IMAGING has signed an agreement with the Allison Park Group Inc (APG) for the distribution of APG's extensive range of camera and lighting enclosures for machine vision. The agreement covers distribution of these products throughout Germany, France, Switzerland and the UK.

VOC emissions data may be invalid (08/09/2011 12:33:09)

Keith Golding, MD of Quantitech Limited, is urging stack testers and the managers of prescribed industrial processes to check the MCERTS certificates of their Flame Ionisation Detectors (FIDs). He says, "The FID fuel gas for which the certificate is valid is now specified so process operators should ensure, for example, that if the certificate specifies a Hydrogen/Helium mix, any compliance monitoring must also use this mixture or results will be invalid.

Direct connection from shop floor to manufacturing database improves efficiency for Kawasaki (08/09/2011 12:30:16)

A single PLC module proved to be the key in unlocking the production efficiencies at a pioneering hydraulic specialist. The technical support team at LC Automation suggested Plymouth-based Kawasaki Precision Machinery (KPM) would reap numerous benefits by utilising a Mitsubishi MES module (manufacturing execution system).

Magma’s Quartz DRC Physical Verification Solution Qualified to Support GLOBALFOUNDRIES’ DRC+ Flow for Technologies at 28 nm and Below (08/09/2011 12:27:13)

Magma® Design Automation have announced that the new pattern matching capability in the Quartz™ DRC physical verification product has been qualified to support DRC+, GLOBALFOUNDRIES' silicon-validated, yield-critical pattern-based design for manufacturing (DFM) verification flow for all advanced process technologies, including 40 nanometer (nm), 28 nm and below.

All American recognizes Semtech's new EcoSpeed converters (08/09/2011 12:25:42)

All American Semiconductor announces it carries Semtech's new EcoSpeed® converter platform. The platform incorporates Semtech's patented adaptive on-time (AOT) control architecture to deliver ultra-fast transient response and very high efficiency across the entire load range.

Catalog Data Solutions Catalog, CAD Download and Configurator Solution Selected by Symmco Inc. (08/09/2011 12:24:24)

Catalog Data Solutions (CDS) has announced that Symmco, Inc. has elected to use three of its products: the online parts catalog, CAD download solution and configurator.

Rittal is expanding its range of uninterruptible power supplies (08/09/2011 12:21:10)

Rittal is expanding its range of uninterruptible power supplies (UPS) with the PMC 40 and PMC 120 in the extra dimension of 600x200x800 mm. In addition to the already existing rack-mounted version, Rittal also offers a PMC 40 installed in a single UPS rack plus integrated power modules and batteries.

Field Precision announces new capability: 3D meshes from photographs (08/09/2011 12:16:51)

The Field Precision MetaMesh program creates 3D slab objects from photographs. The feature is useful for modeling printed circuits and converting MRI slice sequences.

Awkward cable entry? Hylec-APL has the Kwik Fix… (08/09/2011 12:15:33)

Hylec-APL has expanded on its already wide range of cable glands with the introduction of the Kwik Fix range. Designed for use in applications where access to the interior of a bulkhead or enclosure is restricted, the Kwik Fix can be used to form a quick, IP68 connection. Especially suitable for use with Switch Cabinets and cooling and heating systems, the Kwik Fix can reduce installation time which will increase profitability.

ExperTune® Offers No-Cost Upgrade to Rockwell’s RS Tune® and RS Loop Optimizer® (08/09/2011 12:12:41)

ExperTune, Inc. is offering a no-cost upgrade for existing users of Rockwell RSTune® and RS Loop Optimizer®. The transition is simple because ExperTune is the developer of the RSTune and RSLoop Optimizer software.

Delta Tau Geo Brick LV family is available from Heason Technology (08/09/2011 12:10:03)

Delta Tau's Geo Brick LV family of packaged 8-axis motion and machine controllers is available from Heason Technology as part of its motion system design and build service. The Geo Brick LV and the newly announced 19 rack mount version, the LV-PC, is supplied with eight user configurable 250W drives for linear or rotary brushed and brushless servos, ceramic motors or stepper motors in any mix with feedback interfaces that include practically all commercially available types available today.

Variohm EuroSensor at Oil & Gas 2011- Stand 4E80 (08/09/2011 12:07:22)

Variohm EuroSensor, Stand 4E80, will highlight a selection of sensors and transducers from its own manufactured range as well as feature specialist oil and gas industry sensing solutions from a selection of its global distribution partners.

Eriez FinesSort® Reclaims Fine Metal Particles (08/09/2011 11:58:09)

Eriez Magnetics Europe Ltd. FinesSort® Metal recovery system is the ultimate in fine particle metal reclamation. The FinesSort® helps scrap processor's increase profitability by recovering materials less than 25mm in diameter and thus aids reduction in materials sent to landfill.

Atlas Copco Compressors is the official supplier of compressed air to WorldSkills 2011 (06/09/2011 11:18:11)

Atlas Copco Compressors is pleased to announce that it will be sponsoring WorldSkills London 2011, the world's largest international skills competition for young people. The company will be supplying four of its energy efficient oil-injected rotary screw compressors to provide the compressed air necessary to power 15 of the 46 competitions taking place at the event: two GA30VSDs, a GA55 and a GA11 Full Feature.

Eaton Adds More I/O Options for SmartWire-DT (01/09/2011 17:56:06)

With the introduction of six new input/output modules, Eaton's Electrical Sector has further enhanced the versatility and convenience of its innovative SmartWire-DT communication system, which virtually eliminates the need for conventional control wiring in panels. Two of the new modules are for use with digital signals and three are for analogue signals. The sixth new module is a universal type that makes it easy for users to provide for future expansion of SmartWire-DT installations.

Molex Interconnects Power UMsolar Car on 1,800 Mile Australian Outback Journey (01/09/2011 17:52:43)

Molex Incorporated has provided support to the University of Michigan Solar Car team (UMsolar) in its bid to win the 2011 World Solar Challenge. The UMsolar team's car, named Quantum, features several electronic components from Molex, as well as a variety of solderless terminals.

Reducing design space with igus Chainflex cabling Chainflex CF11 and CF211 cables with up to 30 percent smaller bending radii (01/09/2011 17:48:43)

Following a series of representative in-house tests carried out over a period of two years, igus UK, the energy chain and cable specialist, now certifies that its Chainflex CF11 and CF211 series can operate reliably and safely in smaller bending radii. The permissible bending radius for the CF11 TPE measuring system cable has been reduced by 32 percent from 10x diameter to 6.8xd, and that of the CF211PVC variant by 25 percent from 10xd to 7.5xd.

Rotary Table with Mega Through-Hole (01/09/2011 17:42:14)

A servo motor-driven NC rotary table with a very large through-hole has been introduced by Kitagawa to facilitate accurate milling and drilling of tube- and shaft-type components on machining centres and manual mills. The competitively priced unit, designated TG530,is available in the UK from 1st MTA, Salisbury.

Technologically Advanced Dzus® Quick Access Fasteners Roll Out & Turn Heads (01/09/2011 17:36:00)

Three years ago, inventor of the quarter-turn quick access fastener, Dzus Fasteners, took quarter-turn fasteners to a new and unrivalled level with the development of the D8. Incorporating advanced and unique manufacturing technology using a rolled cam form process exclusive to parent company Southco, this quick access fastener has seen sales increase by 28% overall, including 60% growth in the US in the past year alone.

New Product Fdb – New Panel Fittings Range For Cabinets And Furniture (01/09/2011 17:24:01)

Cabinet and furniture hardware specialists FDB Panel Fittings have recently launched a new range of high quality fittings designed for areas where style and robust use are key to the situation. This would include retail/service environments, corporate offices, high quality equipment and public access facilities such as banks, libraries etc

Deeter appoint new Sensor Distributor for Asia - New Asian website launched in support of appointment (01/09/2011 17:18:11)

The Deeter Group, market leaders in the design, development and manufacture of electronic sensors and control systems, announce appointment of a new distributor in Singapore. Established in 1996 MaxMega specialises in sales of high performance electronics components and system integration services into the major Asia-Pacific markets.

New Revolutionary Mig Welding Torch Tester From Weldability-sif (01/09/2011 17:07:49)

Weldability-SIF, the UK based supplier of MIG, TIG, MMA, Spot and Oxy/Fuel welding and Plasma cutting machines, torches, accessories, consumables and personal protective equipment has launched a new revolutionary CE marked MIG Welding Torch Tester, which enables MIG welding equipment service engineers and welding shop supervisors to easily test and diagnose any electrical problems that may occur with their MIG welding torches

New Managing Director For Flextraction (01/09/2011 16:59:30)

Flextraction Ltd, suppliers and manufacturers of Local Exhaust Ventilation products has announced that Lee Darton has been appointed Managing Director with immediate effect. Lee has many years experience in the Fume and Dust Extraction equipment industry. He has been with Flextraction for over 12 years as Sales Manager and most recently as General Manager (Products) and this promotion comes at a time as the Company continues to further develop its range of products and to increase its market share both in the UK and in Europe.

Sherborne Sensors Announces End of FY Performance (01/09/2011 16:39:18)

Sherborne Sensors, has announced improved sales performance for its fiscal year ending June 30. Sales rose approximately 15% year over year globally, with growth of approximately 13% in the North American market.

Lane Electronics to exhibit at DESi 2011 (01/09/2011 07:46:57)

Leading electrical and electronic connector specialist FC Lane Electronics is exhibiting at DSEi 2011, the Defence Systems & Equipment International exhibition, which this year is being held at London's ExCeL exhibition centre from 13 to 16 September.

A digital oscilloscope for the analog world (31/08/2011 15:55:38)

The new PicoScope 4262 from Pico Technology is a 2 channel, 16 bit very-high-resolution oscilloscope (VHRO) with a built-in low-distortion signal generator. With its 5 MHz bandwidth, it can easily analyze audio, ultrasonic and vibration signals, characterize noise in switched mode power supplies, measure distortion, and perform a wide range of precision measurement tasks.

Micro-Miniature Slide Switch With Auto-Return Slider From knitter-switch (31/08/2011 07:58:03)

knitter-switch has announced a micro-miniature slide switch designed to operate as an on-off switch for personal multi-media products, musical instruments and other applications where a very small, space saving switch is required.

Thermal Energy International Raises The Bar On Thermal Efficiency At Stand H41 At Energy Solutions Expo (30/08/2011 15:10:27)

Thermal Energy International Inc. will be exhibiting its range of awarding winning energy efficiency products at standat stand H41 at the Energy Solutions Expo at Olympia, London on the 11th and 12th October. TEI's products include its GEM venturi orifice steam traps and its flue gas condensing heat recovery economisers or economisers.

Ambient Noise makes sound waves in Southampton (26/08/2011 14:40:13)

Ambient noise in North European seas: monitoring, impact, management (3-5 October 2011, National Oceanography Centre, Southampton) - conference experts highlight how noise affects marine life.

White Paper Outlines Power Considerations in Business Disaster Planning (24/08/2011 15:47:10)

Para Systems, Inc., a leading provider of comprehensive power protection solutions sold under the Minuteman brand, today released a white paper, "Powering Your Business Disaster Planning." The white paper describes key components of a comprehensive plan to prevent businesses and other organizations from suffering severe consequences as a result of a power outage, whether it's a short-term loss of power or an extended outage.

IDC Extends Range, Network Size And Security Of Low Power Wireless Networks With New 28109 Router (24/08/2011 15:36:55)

IDC is expanding the scope of its ZigBee low power wireless network products, in range, network size and security, with the introduction of the new ZB109 Router. Designed for operation with IEEE 802.15.4/ZigBee wireless sensor networks, the ZB109 provides redundancy in the event of a router failure. Up to 100 of the devices can be deployed in a wireless network using a single IDC ZB103/4 Gateway, the routers providing a range of up to 100m line-of-sight with a 2.1dBi antenna, or much increased distances up to 250m with the optional 8.5dBi antenna.

New miniature milling cutters for small hole operations (24/08/2011 15:33:55)

It's well documented that producing features such as small threads and chamfers in small holes using a machining centre or milling machine is far from straightforward due to the size of cutter, the neck/reach required and the associated issues of productivity and accuracy. However, because of ongoing demand for improved solutions, these problems can now be addressed using Sandvik Coromant's new CoroMill® 326 miniature milling cutter.

The latest STABILUS gas springs from SKF provide control and safety for remote windows (24/08/2011 15:14:29)

The latest range of STABILUS gas springs and dampeners from SKF, the knowledge engineering company, has been developed to offer designers a wide range of options for designing safe, reliable and cost-effective opening systems. Now windows, skylights, roof vents and smoke exhaust flaps can benefit from controlled, force-assisted opening and gentle closing, safe positioning or fast shoot functions. STABILUS gas spring and dampeners have been designed to withstand the most demanding use, are available in a variety of configurations and incorporate innovative features offering functional safety and convenience to the end user.

Tsubaki Introduces Full Range of Overload Protection and Control Devices (24/08/2011 15:10:39)

Tsubaki has introduced a full range of mechanical safety devices, electronic safety products, and mechanical control devices to protect machinery from potentially damaging mechanical and electrical overload. The SAFCON range encompasses the industry's widest range of torque limiters, torque guards, torque keepers and electronic shock monitoring devices. All offer reliable overload protection to prevent equipment damage, and which minimise downtime to optimise productivity.

APTIV Film Replaces Metal and Improves Performance Of New Textile Brake Cone (24/08/2011 14:48:38)

Victrex Polymer Solutions and ROJ Electrotex, Biella, Italy have worked together to develop an innovative thermoformed braking cone designed with APTIV&#63429; film made from VICTREX&#63429; PEEK™ polymer. The high performance thermoplastic film was selected to replace metal which suffered from mechanical decay and inconsistent braking performance on industrial weaving machines.

New Star SW-20 Sliding Head Lathe To Be Launched At EMO 2011 (24/08/2011 14:44:12)

With its two tool platens in front of and behind the spindle centreline, Star's new SW-20 sliding-headstock mill-turning centre with 11 CNC axes will make its European debut at EMO 2011.

Hurco Machines Underpin Subcontractor's Ongoing Expansion (24/08/2011 14:06:22)

Over the past few years, there has been a significant increase in research and development activity at medical device manufacturing facilities around Galway, while the same area in the west of Ireland has also seen a surge in the growth of companies in the biosciences field.

Benchtop UV Conveyor Offers Fast Cures (24/08/2011 13:54:52)

Specialist adhesives company Intertronics have a wealth of UV cure adhesives and UV cure systems for manufacturers looking to upgrade their adhesive technologies or perhaps to move from a traditional mechanical fastening system to an adhesive solution – for reasons of cost and/or quality.

New cold-Cleaning Systems Saves Energy (24/08/2011 13:43:03)

For batch washing, degreasing and deswarfing of industrial components, a new, entry-level, aqueous cleaning machine that is both cost-saving and energy-efficient has been introduced by German cleaning machine manufacturer, Dürr Ecoclean.

Kaisertech Launches New Apollo Seiko Routing System (24/08/2011 13:23:24)

Kaisertech are proud to add a new range of Routing Systems from Apollo Seiko. The new, three-axis desktop robot has integral position detection encoders. An electric router with exclusive and easy to use software, the unit also comes with the recently launched Kaisertech high powered dust collection kit.

UK Designed and Manufactured RF Connectors on show at European Microwave Week (24/08/2011 13:16:12)

Intelliconnect (Europe) Ltd, the only UK manufacturer of 50&#8486; Coaxial and Triaxial RF connectors will be at the European Microwave Week in October supporting their UK Technical Representative UKRF. At the Manchester based show Intelliconnect products will be found on stand number 618.

Jet Edge Exhibiting 90,000 PSI Water Jet Technology at FABTECH 2011 (24/08/2011 12:01:54)

Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet systems, will demonstrate its 90,000 psi water jet cutting technology at FABTECH, Nov. 14-17 in Chicago. Look for Jet Edge in booth 2739.

MicroCare Corp. Introduces the Latest Benchtop Cleaning Products to the Asian Market at Nepcon China 2011, Stand 1C10 (24/08/2011 11:55:49)

With innovative chemistries and production aids engineered for manual cleaning of circuit boards, MicroCare® Corporation is ready to introduce its new additions to the Asian Market at Nepcon South China, stand 1C10. MicroCare is a global leader in the manufacture and engineering of precision cleaning, coating and lubrication products for industry.

BPS: New pressure sensor family from Balluff (24/08/2011 11:49:24)

Balluff introduces BPS, a newly developed series of pressure sensors with IP 67 protection for use in gaseous and liquid media. The rugged devices feature a high-quality, long-term stable ceramic load cell and an especially attractive price/performance ratio, simple installation, high operating comfort and high preci-sion. A large, bright and easily visible display ensures immediate status overview. This shows not only the current system pressure in bar, mbar, PSI and MPa, but also features fast and simple configuration of the sensors according to the VDMA standard, using 2 keys and intuitive menu guidance.

Rittal 19” Equipment for Outdoor Applications. (24/08/2011 11:43:05)

All too often it is believed that 19" equipment is only suitable for the indoor environment and that for an outdoor application a special enclosure, to create the perfect environment, requires development at huge cost. Rittal's standard range of outdoor enclosures, based on the TS 8, have a whole range of accessories available, including a full range of 19" components suitable for outside use.

Micromech introduces the RTP Precision Piezo Stages (24/08/2011 11:38:39)

RTP Precision Piezo Stages are designed for all kinds of applications where micro or nano-positioning is needed. The clever stages are for the high-end applications which must have high accuracy and high quality whether a single or multiple axis system.

Lorin Grubb, M.S., Ph.D., to Lead Software Initiatives and Crimson® Developments for Red Lion Controls (24/08/2011 11:14:14)

Red Lion Controls, Inc. is proud to announce the promotion of Lorin Grubb, M.S., Ph.D., to Lead Software Engineer. Dr. Grubb will be responsible for directing and managing the day-to-day activities for the software team. Additionally, he will be instrumental in the architectural development of and improvement to Crimson®, Red Lion's innovative configuration software. This user-friendly software platform is designed to program the company's comprehensive line of industrial control products, making it easier to design and implement attractive and powerful user interface solutions.

ELIO® AQ - Adaptor Size 8 for ELIO® Contacts (24/08/2011 11:04:11)

ELIO® AQ is a metal adaptor for ELIO® optical contacts, for size 8 Quadrax cavities. It enables a standard ELIO® optical contact to be inserted into the size 8 Quadrax cavity of several connector types. The ELIO® AQ adaptor is already available for connectors in the MIL-DTL-38999/EN3645 series III, ARINC 404 and ARINC 600 ranges. All insert arrangement types with a size 8 cavity can thus be fitted with a fiber optic connection using the ELIO® optical contact.

Open Comms Helping Secure European Manufacturing Jobs (24/08/2011 10:59:29)

Manufacturing plants across Europe are being transformed by the adoption of Open Architecture control systems as the sector's recovery from recession continues. Plant managers and control engineers are choosing to invest in the flexibility that will allow their production capabilities to easily adapt to changing demands over the coming years. The trend is being followed by John Browett of the CC-Link Partner Association (CLPA), which promotes and develops the CC-Link open network technology.

LC Automation catch the Anybus (24/08/2011 10:54:38)

LC Automation, the technical distributors of industrial control and safety products, has teamed up with HMS Industrial Networks Ltd, a global leader in network technology, to offer cutting edge solutions to communication headaches.

Rohde & Schwarz Awarded Contract for VHF and UHF Emergency Radio System for Queen Elizabeth Class (QEC) aircraft carriers (24/08/2011 10:44:59)

Rohde & Schwarz UK Ltd are pleased to announce the contract award from the Aircraft Carrier Alliance ( ACA ) for the production phase of the VHF and UHF Emergency Radio System for both Queen Elizabeth Class (QEC) aircraft carriers.

New Test Generator from TESEQ simulates Supply Dips, Drops and Variations (24/08/2011 10:39:27)

Teseq, a leading developer and provider of instrumentation and systems for EMC emissions and immunity testing, announces the launch of the NSG 3040-DDV generator which provides test waveforms for simulating Supply Dips, Drops and Variations. The new NSG 3040-DDV is the first in a series of single-function generators derived from the successful NSG 3040 family of combination generators. Unlike the NSG 3040 system, which features a mainframe that is prepared, wired and tested for all possible test module combinations and upgrades, the NSG 3040-DDV is designed to accommodate only the module required for dips, drops and variations. This function-specific design allows the NSG 3040 to provide full performance at the lowest possible price.

ISA Announces Human Asset Optimization Track at ISA Automation Week 2011 (24/08/2011 10:37:57)

The International Society of Automation (ISA) announced today the sessions of its Human Asset Optimization Track at ISA Automation Week 2011: Technology and Solutions Event. The conference will take place in Mobile, Alabama, USA, 17-20 October 2011, at the Arthur R. Outlaw Convention Center. The Human Asset Optimization Track offers presentations on topics that range from social media to best practices in automation project management.

LeCroy Announces International Distribution Agreement with Mouser (24/08/2011 10:35:55)

LeCroy Corporation, a leading manufacturer and supplier of oscilloscopes and serial data solutions, today announced an international distribution agreement with Mouser Electronics. Mouser's state-of-the-art global distribution network will place LeCroy oscilloscopes, arbitrary function generators and logic analyzers within easy reach of electronic design engineers and production equipment buyers in nearly every corner of the world as well as expand the support network for LeCroy products. LeCroy is committed to working with Mouser Electronics in all key geographical markets to provide a one stop shop capability for test equipment needs.

Appointment and promotion underpins UK growth for HBM (24/08/2011 09:56:49)

HBM UK Ltd has appointed Greg Todd as Sales Manager for companies in the south of the country. Greg is a fully qualified electro-technical engineer and brings five years of experience in electrical testing combined with similar experience in mechanical engineering sales with him to the role.

Spreadtrum Secures Leadership Position in TD-SCDMA Market (24/08/2011 09:50:18)

Spreadtrum Communications, Inc.,a leading fabless semiconductor provider in China, with advanced technology in both 2G and 3G wireless communications standards, has announced that it has achieved a leadership position in China's TD-SCDMA market, according to the analyst firm IHS iSuppli. TD-SCDMA is the China 3G standard adopted by the country's largest telecom operator China Mobile.

Burkert Builds on the Success of Steam Training with New Free Courses for Hygienic Processing (24/08/2011 09:45:55)

Bürkert is addressing the problems of skills shortages, sustainability and environmental and regulatory compliance in process markets, by introducing a second series of training courses dealing with the critical subject of Hygienic Processing. In common with Bürkert's highly successful Steam Training courses - more of which are to be run shortly - the Hygienic Processing courses are free of charge.

The new name in additive manufacturing (24/08/2011 09:37:33)

Renishaw SLM is a pioneering additive manufacturing process capable of producing fully dense metal parts direct from 3D CAD using a high-powered fibre laser. Parts are built from a range of fine metal powders that are fully melted in a tightly controlled atmosphere layer by layer in thicknesses ranging from 20 to 100 microns.

New EA Technology Training Centre Offers Power To The People (24/08/2011 09:31:32)

Multiple Queen's award-winning power engineering specialists, EA Technology, has launched a unique training facility dedicated to meeting a potentially serious power skills shortage. With the government regulator Ofgem and the Energy and Utility Sector Skills Council warning of skills shortages in key areas of the power industry, EA believes its Power Skills Centre (PSC) will be a vital resource in providing training that can help the sector's workforce meet the technological, environmental and commercial challenges it faces.

3-Axis Magnetic Sensor Hybrid HMC2003 Acquires Traceability Status (24/08/2011 09:24:10)

ETLG Inertial Aerosystems announce that the 3 - Axis magnetic sensor hybrid HMC2003 has acquired traceability status. Each sensor is serialised and batch traceable and ETL's ISO 9001:2008 quality management system records and tracks the data .

EAL calls for better vocational careers advice in schools (24/08/2011 09:22:34)

Engineering and manufacturing employers attending an industry roundtable questioned funding cuts to Level 3 Apprenticeships and suggested that Government provide apprenticeship sponsorship to assist in getting young people into work, as well as supporting efforts to promote Apprenticeships to secondary school students.

BEI Kimco Magnetics Introduces Housed Voice Coil Actuator Featuring High Performance Capabilities of Up to 310 Pounds Peak Force (24/08/2011 09:19:18)

BEI Kimco Magnetics, a company of Custom Sensors & Technologies (CST), Inc., has introduced the LAH43-86-000A High Force Housed Actuator as the latest addition to its growing line of housed actuators. The newest model has the highest force capability of the family as well as self alignment features.

Stieber Introduces Releasable Backstops For High Speed Shafts (24/08/2011 09:11:16)

Stieber Clutch has expanded its range of load sharing backstops with the introduction of the RSRT releasable backstop. In the event of a blockage, belt jam or overload, the release facility allows the stored energy to be released in a controlled manner, enabling personnel to work on the belt after an incident.

“Good for Business, Good for the Economy” (19/08/2011 16:33:24)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), responds to research that shows nine out of 10 employers value the raw talent of school leavers. "Many business leaders and captains of industry we see today started life as young apprentices" Watson comments. "So I am not in the least bit surprised that recent research (1) has shown employers attitudes towards young people are positive, with many holding them in high regard."

New miniature string pot sensor suits low-cost linear position measurement in tight spaces (19/08/2011 16:22:53)

Variohm EuroSensor has launched a new range of miniature string pot or cable extension linear sensors from Celesco Inc. that have flexible mounting and are ideal for space-restricted absolute linear position measurement up to a 635 mm range.

New AVS1000 vertical lift stage for precise positioning of large and heavy loads has through aperture (19/08/2011 16:10:41)

The AVS1000 is the latest addition to Aerotech's comprehensive range of vertical lift and Z-axis micropositioning solutions, and is aimed at precise sub-micron elevation of large and heavy loads for semiconductor manufacture, automated tool alignment, vision inspection and laser micromachining.

SKF bearings take the load on Pont Y Werin bridge (19/08/2011 15:58:43)

Advanced spherical roller bearings, developed and manufactured by SKF, the knowledge engineering company, are playing a vital role in supporting a 40 tonne, 30m opening deck on the Pont Y Werin bridge in South Wales. The bearing units form part of a powerful hydraulic system that is capable of lifting the bridge deck safely and efficiently in just two minutes to a vertical position of 75 degrees, while withstanding wind speeds of up to 25m/sec.

New Series of Rectangular Antivibration Mounts from AAC Are Designed for Compression Loads up to 3598 lbf (19/08/2011 14:39:07)

A new series of conical antivibration base mounts from Advanced Antivibration Components (AAC) are designed to dampen shock and vibration for compression loads up to 1632 kgf (3598 lbf). Identified as the V12Z06MA...Series, their metric housing is made of zinc plated steel and the isolator is made of a nitrile rubber compound which offers excellent pliability and elasticity. The maximum recommended load of the 6 isolators in the series ranges from 510 kgf to 1632 kgf (1124 lbf to 3598 lbf). They are featured at the AAC eStore where you can order online, request a quote, download CAD models, check stock plus view catalog and technical pages. Typical applications include their use under controllers, large pumps, fans, motors, compressors, and other medium load equipment. Their durometers are 45 and 60 ± 5.

Submersible Molex MX150 Headers Afford Superior Sealing and Electrical Performance (19/08/2011 14:29:28)

Molex Incorporated recently unveiled high performance MX150™ single- and dual-row headers for use in high-temperature automotive and commercial vehicle applications. Complementing widely used and industry-recognised MX150 receptacle connectors (series 33471 and 33472), the MX150 sealing interface has been optimized to meet IP6K7 and IP6K9K sealing requirements.

MicroCare Corp. Introduces the Latest Benchtop Cleaning Products to the Asian Market at Nepcon China 2011, Stand 1C10 (19/08/2011 14:20:57)

With innovative chemistries and production aids engineered for manual cleaning of circuit boards, MicroCare® Corporation is ready to introduce its new additions to the Asian Market at Nepcon South China, stand 1C10. MicroCare is a global leader in the manufacture and engineering of precision cleaning, coating and lubrication products for industry.

Automated Welding Improves Safety And Productivity In Nuclear Industry (19/08/2011 14:08:26)

Following the introduction of its new DLS range of 3D digital laser scanners, Oxfordshire-based Meta Vision Systems has put together a VistaWeld package designed specifically to automate welding jobs in the nuclear industry. These are characterised by multiple passes of the weld torch to fill deep, narrow grooves down to 8 mm across between component parts typically up to 350 mm thick, often of highly reflective stainless steel.

New ATEX-approved LBFS level switch from Baumer (19/08/2011 14:01:09)

Baumer's multi-purpose LBFS level switch is now available in three different ATEX configurations which enable safe level detection in explosive gaseous and dusty atmospheres, typically found in the chemical, pharmaceutical, or food industries. Baumer uses a highly specialised protective design for the ATEX versions of the LBFS. Thanks to this, versions Ex ta for dust (zones 20, 21, and 22) and Ex nA for gas (zone 2) can be used without a Zener barrier because the housing itself already provides all the necessary protection. This is very cost-effective because usually all sensors for hazardous areas require a Zener barrier. The ATEX certifications cover zones 0, 1, and 2 (gas) as well as zones 20, 21, and 22 (dust). Quick installation and ease of use is also ensured for version Ex ia for gas (zones 0 and 1). For this version, Baumer provides the ready-for-use isolation module PROFSI3 LS which is specially designed for use with Baumer's level switches LBFS and LFFS. This dedicated isolat

OTT launches new Smart Weather Sensors (19/08/2011 12:38:39)

Specialist hydrometeorological instrumentation company OTT Hydrometry has a long history in the development of leading edge sensor technology and the latest additions to the company's family of weather monitoring instruments exemplify the company's focus on high levels of performance combined with both simplicity of use and minimal maintenance.

Haydon Kerk Motion Solutions Releases 36mm Linear Actuator Configuration that Replaces Existing 42mm Packages (19/08/2011 12:29:38)

Haydon Kerk Motion Solutions, a premier manufacturer of linear motion products, has released a new version of its popular 36mm G4 linear actuator. This new configuration includes a special adapter plate that allows the smaller 36mm OD unit to replace 42mm and 46mm units in existing applications. Performance of the 36mm G4 linear actuator not only exceeds the performance of comparable size actuators, it approaches the performance of larger 42mm and 46mm linear actuators from various manufacturers. The 36mm unit with the integrated adapter plate allows users to replace existing 42 and 46mm units easily by using the same bolt pattern and pilot surface.

TDK-Lambda showcases power supply innovations at DSEi 2011 (19/08/2011 12:23:59)

TDK-Lambda UK, will showcase an extensive array of new and innovative products at this year's Defence Systems & Equipment International (DSEi) exhibition. A full line-up of standard and configurable power AC-DC power supplies, DC-DC converters and programmable power supplies will be on display that meets demand for ever more rugged, high-reliability and lightweight COTS and modified COTS (MCOTS) products with industry-leading EMC performance and efficiency.

Spectris to Acquire Omega Engineering, Expanding Process Measurement and Control Instrumentation Offering Globally (19/08/2011 12:12:37)

Spectris plc, the productivity-enhancing instrumentation and controls company, announces that it has signed an agreement to acquire the Omega Engineering business. Omega is a leading supplier of process measurement and control instrumentation across a broad range of categories, including automation, wireless, test and measurement, process control, power monitoring, environmental and lab equipment. Founded in 1962, Omega has grown steadily and is now an established global leader in the technical marketplace. The company offers over 100,000 state-of-the-art solutions for measurement of temperature, pressure, flow, level, strain, humidity, pH and conductivity, as well as a comprehensive line of data acquisition, electric heating and custom engineered products.

Thermal Energy International Raises The Bar On Thermal Efficiency At Stand H41 At Energy Solutions Expo (18/08/2011 15:46:32)

Thermal Energy International Inc.will be exhibiting its range of awarding winning energy efficiency products at stand H41 at the Energy Solutions Expo at Olympia, London on the 11th and 12th October. TEI's products include its GEM venturi orifice steam traps and its flue gas condensing heat recovery economisers .

Armacell Wins Extended British Gas Supplier Status (16/08/2011 16:52:15)

Armacell UK, the market leader in elastomeric thermal insulation products, have had their successful long term contract with British Gas extended for a further 12 months. The agreement further strengthens the long-standing commercial relationship between the two companies, and confirms Armacell as the preferred supplier for pipe insulation for heating and plumbing installations.

ISA Technical Report Presents Wireless User Requirements for Factory Automation (16/08/2011 16:32:07)

The ISA100 committee has completed a new technical report that presents user and market-related requirements for the design, operation and maintenance of wireless systems throughout their life cycles in factory automation. Factory automation applications involve specific technology, control and information systems that are characterized by discrete operations with possible extensions into batch process control. Examples include automotive manufacturing, packaging machinery, machining and robotics.

Dolomite and Cavendish Laboratory develop innovative device for optical micromanipulation of cells (16/08/2011 16:16:57)

In collaboration with Cavendish Laboratory (Department of Physics at the University of Cambridge), Dolomite, a world leader in the design and manufacture of microfluidic solutions, has designed a glass microfluidic device for a novel laser tool that allows the study of mechanical properties of cells using optical stretching on a single cell basis.

Thermoelectric Cooler Provides Easy-to-Use Peltier Cooling for Electronic Enclosures (16/08/2011 16:00:29)

Pentair Technical Products announces the McLean Thermoelectric Cooler for cooling electronic components in small indoor or outdoor electronic enclosures. Operating on Peltier effect technology, McLean Thermoelectric Coolers deliver 60, 100 or 200 Watts of cooling for applications including telecommunications, battery cabinets, industrial enclosures, security systems and more. The compact coolers feature no refrigerant, compressors or filters, providing an ideal solution for demanding or low-maintenance environments. The 24 VDC and 48 VDC Coolers are CE- and UL-recognized, and available in 13 versatile models.

Design Concept for Transformer-less Solar Inverter- application support information for transformer-less single phase solar inverters (16/08/2011 15:58:58)

Vincotech is able to offer a wide spectrum of power modules for solar applications. The announced technical paper provides application support information for transformer-less single phase solar inverter applications. It discusses different output filter configurations, like dual inductor with split winding and dual inductor with single winding.

EasySYNC partners with Mouser Electronics (16/08/2011 15:53:51)

EasySYNC Ltd, a specialist in USB communications and supplier of USB instruments, has finalized a global distribution deal with Mouser Electronics. Through the deal Mouser will help EasySYNC to build stronger relationships with the global electronics design community, offering immediate access to an expansive inventory, as well as identifying new opportunities for its products in a broad spectrum of different industry sectors.

ip.access passes half million milestone in 3G small cells (16/08/2011 15:52:21)

UK-based small cell technology developer and manufacturer, ip.access, today confirmed that its Oyster 3G femto technology is powering more than 500,000 Access Points deployed live in homes, offices and mobile network hotspots worldwide.

Nitrogen For Modified Atmosphere Packaging Available Practically FOC (16/08/2011 15:47:21)

The Nitrogen generators available from Hi-line Industries can be matched to individual site demand requirements of Nitrogen users to ensure maximum economy and performance. Nitrogen gas is commonly used throughout many industries where safe, inert environments are required. This includes the petroleum, chemical, pharmaceutical, paint and varnish industries as well as the production of ferrous and non-ferrous metals, together with electronic and glass products.

Mitsubishi Electric E700 Inverter now with Safe Torque Off Input (16/08/2011 15:41:40)

High Performance Compact VFD now compliant with EN954-1 Cat.3 and IEC60204-1 Stop Category 0 The popular E700 series inverter from Mitsubishi Electric is now available with a safe torque off input, eliminating the need for a redundant contactor in installations seeking compliance with EN954-1 Cat.3 and IEC60204-1 Stop Category 0. The safe torque off version of the E700 is denoted by the characters "SC" after the ampere rating in the model number.

Major Spanish Automotive Manufacturer Saves €2,500 Per Year On Operation Of One Drilling Units With (16/08/2011 14:26:35)

One of the major production plants of a large Spanish Automotive Group is benefiting from savings of €2.500 per annum on the operation of a drilling unit on one of its main assembly lines. The savings have been provided by NSK as part of its cost saving, Asset Improvement Programme, which takes a holistic approach to bearing problems experienced in production environments. The problem with the drilling unit was that its rear bearings repeatedly failed after 3 to 4 months of operation. The result of these failures was unplanned production stoppages and costly downtime, while the bearings were removed and replaced. With downtime costs running at €500/hour for the car plant, three breakdowns per year at around 2.5 hours in duration were costing the company €3.750 – and this on a single drilling rig.

Water diverter can replace up to six separate valves (16/08/2011 14:23:26)

By replacing up to six solenoid valves in a single unit, the Componenti Series 610 Water Diverter now available from Becktech cost-effectively simplifies maintenance and installation while reducing scale. It is self-cleaning, ensuring no loss of dosing accuracy in routing water from a boiler to mixing stations in vending machine or other applications.

Exlar Announces Engineering Scholarship Program Recipients, Recognizing and Helping to Develop Future Talent (16/08/2011 14:00:45)

Exlar Corporation recently awarded $1,000 scholarships to four distinguished local area high school graduates planning to pursue engineering degrees. The recipients include: Aaron Bartnik of Eden Prairie who will be attending the University of Minnesota; Margaret McGonigle of Excelsior who will be attending the University of Notre Dame; Kristian Potter of Chaska who will be attending the University of Minnesota; and Austin Wilder of Chanhassen who will be attending Georgia Institute of Technology

Distributed inverter range has increased options (16/08/2011 13:51:19)

NORD Drivesystems has added an external 24 V control input option to its entry level and low-cost SK2x0E motor mounted decentralised inverter. Previously only available on the higher specification SK2x5E series, which also includes standard features of input status LEDs, setpoint potentiometers and rectifier integrated brake control, the external control option allows the possibility for inverter parameter set-up without mains power, and control availability (including position interrogation) under power failure conditions where a backup supply can be used.

Variohm EuroSensor signs distribution deal with Avtron for magnetic technology rotary encoders (16/08/2011 13:46:09)

Variohm EuroSensor, the electronic component distributor and manufacturer for specialist sensors, has added a new range of magnetic technology rotary encoders to its comprehensive position sensor range following a new UK and Ireland distribution agreement with the USA based technology leader, Avtron Industrial Automation Inc.

Silent Knight Continues Fire Alarm Technology and Code Seminar Tour (16/08/2011 13:38:49)

Silent Knight by Honeywell has expanded its U.S. tour of FREE fire alarm technology and code seminars following numerous requests from engineers, AHJs (Authorities Having Jurisdiction) and facility managers seeking accredited education on code requirements and fire alarm technology. The half-day seminars will qualify attendees for 4.5 CPDs (Continuing Professional Development) units.

Field Precision announces Associates program for consultants and small businesses (16/08/2011 13:21:39)

The Field Precision Associates Program gives technical consultants an opportunity to apply state-of-the-art 3D finite-element electromagnetic software at no charge.

Global safety solution for Subaru WRC ARPRO® helps World Rally Championship meet new FIA safety mandate (16/08/2011 13:11:46)

Subaru Technicha International and other WRC teams are relying on ARPRO's impact protection capabilities to meet new FIA safety regulations for the 2011 World Rally Championship season. STI engineers worked with JSP, in both Asia and Europe benefitting from global expertise delivered locally.

Olmec-UK To Show VP2-CR Code Reader At PPMA Show. (16/08/2011 13:07:59)

Vision systems integrator, Olmec-UK will be showing its versatile new VP2-CR code reading system for standard and hi-speed character recognition and verification on labels at the PPMA Show. The VP2-CR provides a simple, graphical user interface using a touch screen controller to allow the system to be set up for any type of label in just 3 menu-driven steps.

Ultra Fast GigE Frame Grabbers With On Board FPGA Processing (16/08/2011 13:01:38)

A new family of FPGA-based GigE frame grabbers is now available from STEMMER IMAGING. The Silicon Software microEnable IV AQ4-GE and VQ4-GE can accommodate up to 4 GigE cameras simultaneously. The on-board FPGA provides real-time image processing significantly reducing the load on the host CPU. Both frame grabbers are also available in PoE (Power Over Ethernet) versions. The microEnable IV AQ4-GE is a simple to use acquisition board that, through standard AcquisitionApplets®, provides simple FPGA processing functions. This allows processes such as flat field corrections and high quality colour reconstructions from raw Bayer data to be carried out at high speed without any complex set-up.

Weldability-SIF Supports NHC Support Young People? Campaign (16/08/2011 12:53:08)

Weldability-SIF, the UK based supplier of MIG, TIG, MMA, Spot and Oxy/Fuel welding and Plasma cutting machines, torches, accessories, consumables and personal protective equipment has lent its support and sponsorship to the NHC (North Hertfordshire College) "Support Young People" Campaign.

New STEMMER IMAGING Website Goes Live (16/08/2011 12:51:41)

The STEMMER IMAGING website, www.stemmer-imaging.co.uk is now live with a fresh, new look and more options than ever before. The new design is a result of listening to the feedback from customers on how the company's internet presence could be improved. Technical innovations ensure that the site is compatible with all of the latest browsers and mobile devices.

Wide Range of Test and Measurement Connectors available from Cliff Electronics (16/08/2011 12:44:41)

CLIFF Electronics, leaders in the design, development and manufacture of components and connectors for audio, engineering, instrumentation, medical, lighting and vending applications manufacture a wide range of 2mm and 4mm plugs, sockets, probes and crocodile clips for professional and industrial test and measurement purposes. Cliff is also a major supplier of test lead sets. These are made to order semi-custom products which combine components from Cliff's standard product range with a suitable double insulated cable, standard cable ratings are 1KV (PVC), 5KV and 12KV (silicone).

Woodworking Equipment - Standard Components From Elesa (16/08/2011 12:35:53)

Industrial woodworking machines are high precision pieces of equipment with a requirement for great flexibility in the manufacturing process so high quality standard components are likely to be of great value in helping machine manufacturers to reach their goals. Standard machine elements are Elesa's speciality as can be seen from their direct drive position indicators, adjustable clamping handles, three arm knobs and spoked handwheels.

New Product - Specialist Hinges and Sealing for Glass Doors from FDB (16/08/2011 11:21:10)

FDB Panel Fittings take very seriously the specialist areas of door and panel hardware – one such area is that which serves the fitment and operation of glass doors. The need for glass doors in 19" racks, office furniture and domestic cabinets is met by their new range of 304 and 316 grade stainless steel glass door hinges in satin finish, as well as polished, brass and bronze finishes – each installed without metal to glass contact.

2012 Dates Announced for City & Guilds Gas Equipment Inspectors Courses (16/08/2011 11:19:24)

Murex Welding Products has announced dates for its 2012 City & Guilds Accredited Gas Equipment Inspectors training courses. Certification and Recertification Courses are designed for safety officers, maintenance staff, supervisors, technical college and school staff as well as anyone else responsible for the safety aspects of oxy-fuel gas systems.

NDC Infrared Engineering Acquires IRM Group SA (16/08/2011 11:16:37)

NDC Infrared Engineering the world's leading manufacturer of web gauging equipment for the plastics, rubber, nonwoven and extrusion coated businesses, has acquired the IRM Group (Alleur, Belgium), a leading manufacturer of high-technology measuring systems for the metals industries.

Excelsys Xgen Power Supplies Meet the Most Demanding Application Environments, 1U high, user configurable high efficiency, high power density (16/08/2011 11:13:23)

Excelsys Technologies, market leading specialists in the supply of high-efficiency, low profile, user configurable, modular power supplies now offers ruggedised versions of its Xgen power supply range suitable for COTS/MIL applications and extreme industrial installations.

MAPAL lands major contract for wind turbine gearboxes (16/08/2011 10:51:17)

Precision machining expert MAPAL has been awarded its largest contract to date for a wind power project. The contract covers the tooling needed for machining three different components that are used in wind-power gearboxes, all of the components being manufactured from GJS, a form of cast iron with spheroidal graphite.

Precision Spectrograph Optics (16/08/2011 10:42:17)

For over 40 years Optical Surfaces Ltd. has supplied high precision spectrograph optics for land and space based astronomical telescopes.

New Line Impedance Stabilization Network from TESEQ for conducted emissions testing of Grid Connected Power Conditioners (16/08/2011 10:35:24)

TESEQ, introduces a new Line Impedance Stabilization Network (LISN) for conducted emissions testing of Grid Connected Power Conditioners (GCPC). The DC-LISN-M2-25-V1 is designed for measuring unsymmetrical disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz.

Model 7131A Miniature Triaxial IEPE Accelerometer (16/08/2011 10:31:04)

Measurement Specialties, Inc. new Model 7131A is a miniature triaxial IEPE accelerometer specifically designed for NVH, engine vibration, road response, modal analysis, structural testing, ride handling and flight testing. Available in ±50g to ±2000g dynamic ranges, this rugged accelerometer features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. It incorporates stable piezo-ceramic crystals in annular shear mode which provide a flat frequency response up to >10kHz.

NVision Scanner Helps Reverse Engineer Key Impellor at Hydroelectric Plant (16/08/2011 10:24:38)

Engineers from NVision, Inc., using the company's HandHeld Scanner, were able to quickly reverse engineer a large impellor for a major hydroelectric facility, sparing the facility what would have been an extended shutdown had they needed to produce a replacement impellor from scratch. In less than one week, NVision scanned the original impellor and provided a computer model of it to the facility, which then used the model to manufacture a duplicate impellor for installation. In the end, only a relatively short shutdown was necessary to accommodate the scanning and reproduction of the impellor.

Molex Boosts Electronic Content and Connectivity in Commercial Vehicles (16/08/2011 10:20:10)

Molex Incorporated has expanded its support to commercial vehicle OEMs and suppliers with a broad portfolio of connectors, cables, and assembly options for industrial vehicles and equipment, recreational vehicles, construction equipment, marine equipment, and industrial control modules, radios, pumps and sensors.

Renishaw announces more new products for EMO Hannover 2011 (16/08/2011 10:14:27)

Renishaw, the global engineering technologies company, is announcing more new products that will be demonstrated at the EMO Hannover exhibition taking place in Germany, from 19th - 24th September. These include touch probes and software systems that will aid process control on CNC machine tools and a new surface finish measurement probe for co-ordinate measuring machines (CMMs).

ESAB's Guide to Mig Wires and Tig Rods for Aluminium Welding (16/08/2011 10:09:22)

ESAB has published a new guide to be the most comprehensive range of MIG (Metal Inert Gas) wires and TIG (Tungsten Inert Gas) rods for aluminium welding. This 12-page, full-colour A4 booklet is entitled 'Aluminium welding quality and knowledge' and is available as a PDF file or as a hard copy.

Altair Announces Keynote Presenters of 5th European HyperWorks Technology Conference (16/08/2011 10:07:19)

Keynotes from Carmat, Daimler, Dallara, Diehl Aircabin, Ford, Kirchhoff Automotive, Nippon Sharyo, OHB, and Opel will address challenges and opportunities of virtual product development in Bonn, Germany, from November 7-9, 2011

Westermo industrial Ethernet switch reduces the stress for ABB Force Measurement (16/08/2011 09:55:29)

ABB FM (Force Measurement) is using Westermo´s Redfox industrial Ethernet switch with its latest version of Stressometer system for measurement and control of rolling mills. The implementation of the Redfox Industrial device has helped to reduce the number of data communication products needed from six to one simplifying the system and lowering costs.

EPLAN Electric P8 2.0 SP1 (E-CAE) Software (16/08/2011 09:51:07)

CAE innovations and new options for consistent engineering, that save both time and money, are particularly valued in periods of economic upturn by companies in every industry. EPLAN 2.0 has many new features such as extended reports and parts management, flexible terminal design, new check functions and individual revision management. In maintenance and servicing the new PDF/A format guarantees long-term access to cross-discipline project documentation.

Electrolube Extends its Global Communications with the Launch of a new Microsite (16/08/2011 09:47:01)

Electrolube's mission to ensure they deliver an extensive customer communication service has stepped up a gear with the launch of a new microsite.

Sara LBS Meets Food Industry Requirements with a Hygienically Designed High Speed Door (16/08/2011 09:40:49)

To meet the specific requirements for hygiene and temperature stability in the food industry, sara LBS has developed the Rapid Food Door. Designed to give controlled access into or close off production, washing and storage areas, or to provide entry/exit to transport areas, the Rapid Food Door sets new standards for hygiene, efficiency and user safety, while providing rapid opening and closing to help. maintain consistent temperatures throughout the food processing environment

Low Profile, High Accuracy Compression Load Cell Ideal for Testing Applications (16/08/2011 09:24:06)

In response to engineers who have requested a low profile, high accuracy, button compression load cell for testing applications, LCM Systems is pleased to announce the availability of the CDIT-3 series. Also suitable for a wide range of general engineering and weighing applications, these new load cells have been developed for use in situations where space is limited.

Spectrograph Optics for Astronomical Telescopes .. (16/08/2011 09:22:30)

For over 40 years Optical Surfaces Ltd. has supplied high precision spectrograph optics for land and space based astronomical telescopes.

High Precision Reference & Transmission Flats (16/08/2011 09:21:06)

Working with high-stability materials such as glass, Zerodur and silica - Optical Surfaces Ltd. has established itself as a premier supplier of high precision reference and transmission flats to many leading research organisations and national standards laboratories worldwide.

Rutherford Petawatt Laser to Explore New Areas of Physics (16/08/2011 09:19:30)

The Central Laser Facility (CLF) at the STFC Rutherford Appleton Laboratory (RAL) is one of the world's leading laser facilities providing scientists from the UK and Europe with an unparalleled range of state-of-the-art laser technology. The CLF's wide ranging applications include experiments in physics, chemistry and biology, accelerating subatomic particles to high energies, probing chemical reactions on the shortest timescales and studying biochemical and biophysical process critical to life itself.

Aspheric Lenses for Demanding Applications (16/08/2011 08:59:59)

Benefiting from a uniquely stable manufacturing environment - Optical Surfaces Ltd. is able to produce diffraction-limited aspheric lenses up to 600mm in diameter for the most demanding applications

UNIPOWER - High-Capacity Inverter/Charger Provides Long Term UPS Capability (10/08/2011 22:03:15)

INVO Series Inverter/Charger System is the latest product to be added to UNIPOWER's extensive line of Inverters. The INVO Series is different in that it is a 5kVA inverter with a built-in charger; giving customers the ability to design their own "long-run UPS" by specifying the battery capacity to be used.

DIN-rail Power Supplies from Powersolve can handle harsh industrial environments (10/08/2011 21:55:04)

Powersolve announces a new family of 78 to 600W DIN-rail power supplies which have been designed for use in a wide variety of applications including harsh industrial environments.

Low Profile, High Accuracy Compression Load Cell Ideal for Testing Applications (09/08/2011 17:05:22)

In response to engineers who have requested a low profile, high accuracy, button compression load cell for testing applications, LCM Systems is pleased to announce the availability of the CDIT-3 series

Ashtead Technology Invests in RAE Gas Monitor Service/Calibration Facility (09/08/2011 17:01:40)

As an authorised distributor for the RAE portable gas monitors, Ashtead Technology has invested heavily in a new service and calibration facility that has been expanded to cope with a growing demand from customers.

Parker launches new technology at Offshore Europe 2011 (09/08/2011 16:58:33)

Parker Hannifin, the global leader in motion and control technologies, will be exhibiting an extensive range of its advanced engineering solutions for the gas and oil industry sectors at this year's Offshore Europe Exhibition

Fluke sponsors the WorldSkills Leaders Forum during WorldSkills London 2011 (09/08/2011 16:54:37)

Fluke, the global leader in portable electronic test and measurement technology, is sponsoring the WorldSkills Leaders Forum on Thursday, 6 October, held in conjunction with WorldSkills London 2011, the world's largest international skills Competition, at ExCeL London from 5-8 October 2011

Landia’s pumps pass acid-test at grass pelletting plant (09/08/2011 16:49:52)

Tough durable Chopper Pumps made by Landia have solved a serious wastewater problem at a grass pelletting plant

BELLOWS GRIPPERS PROVIDE SAFE AND GENTLE MEANS OF HANDLING FRAGILE WORKPIECES (09/08/2011 11:59:15)

Festo has launched a range of bellows grippers that provide an ideal pneumatic automation solution to the problem of transporting or holding fragile workpieces.

EMKA 2011 – NEW PRODUCTS, NEW INDUSTRIES (09/08/2011 11:55:58)

EMKA are delighted that the fruits of recent group expansion and product developments are now available to companies in the UK covering an even wider range of industries than before.

M12 Over-molded CAN-Bus Cable Connectors (09/08/2011 11:42:47)

Product Improvement – M12 Field-Attachable Connectors With Offset Soldering Levels

AIP COST REDUCTION PROGRAMME DELIVERS ANNUAL SAVINGS FOR QUARRY COMPANY (09/08/2011 11:28:40)

NSK's Asset Improvement Programme (AIP) for cost reduction has achieved a major success with a large quarrying and mining company, delivering achieving annual cost savings of €14,389 per year as a result of solving an ongoing bearing reliability problem on an overhead quarrying conveyor, replacing the existing bearing inserts with NSK's innovative Molded Oil (Trademark) bearings.

ISO9001: 2008 3 year audit success (09/08/2011 11:17:36)

Quadrant Connections has successfully undertaken the 3 yearly ISO9001:2008 reassessment of our Quality Management System

CUSTOMISED VALVE SOLUTIONS REVOLTIONISE STEAM STERILISATION (09/08/2011 11:11:30)

Customised Valve Solutions Revolutionise Steam Sterilisation: Reducing Equipment Costs, Assembly Time & Installation Space

Light weight heavy duty CATV cables from Quadrant (09/08/2011 10:52:31)

As exclusive UK agent and stocking distributor of Berkenhoff & Drebes (Bedea), Quadrant is now offering the Telass B and Telass L CATV 75ohm coaxial broadcast cable.

HARTING is the first company to be certified for social responsibility (09/08/2011 10:47:12)

As a corporate citizen the HARTING Technology Group is consistently aware of its social responsibility (CSR) and has anchored this position firmly in its company philosophy.

Festo awarded Sunday Times Accreditation for the Best Companies to Work for 2011 (09/08/2011 10:22:37)

Festo, a world leading supplier of pneumatic and electrical automation technology, has been awarded a 1* Accreditation in the Sunday Times 2011 Best Companies Accreditation scheme

Eriez Introduce the New Shred 1 Ballistic Metal Sorter to Scrap Processors (09/08/2011 10:09:40)

Eriez Magnetics Europe Ltd introduces their new Shred1™ Separator which uses ballistics to efficiently separate iron-rich ferrous from much of the mixed metals and waste material in the post Magnetic Drum flow in scrap processing lines

Siemens to strengthen its renewables business (09/08/2011 09:49:17)

Company to set up two divisions for wind power, and solar and hydro

Siemens achieves strong growth again in third quarter (09/08/2011 09:41:48)

Orders and revenue rise, special burdens impact profits

easyRadio Advanced innovative embedded wireless Solution from LPRS (09/08/2011 09:25:47)

LPRS, Europe's leading supplier of short-range radio devices, is delivering production quantities of its latest generation of wireless modules, easyRadio Advanced (eRA)

New Purpose Built Facility in Kirbymoorside, UK (09/08/2011 09:17:32)

Forum Energy Technologies, (FET) announced today the opening of a purpose built facility specifically designed to support a wide range of remote operated vehicles and other subsea equipment.

TRUMPower’s Medically Approved Power Adapters Deliver High Power of 250W (09/08/2011 09:11:46)

TRUMPower is proud to announce their newest addition to their line of medical power supplies with the TMA250 series of 250W AC/DC power adapters. The TMA250 series provides DC output voltages ranging from 12V to 48V

Low Cost Interface to Allen-Bradley Remote I/O (09/08/2011 09:06:07)

Drive A-B RIO as a Master OR Respond to A-B RIO as a Slave

National Instruments Extends Leading PXI RF Test Performance to 14 GHz (08/08/2011 16:55:02)

New Vector Signal Analyzer Delivers Industry's Best Performance, Surpasses Box Instrumentation

ACOUSTICS 2011 SOUNDS OFF IN GLASGOW (08/08/2011 16:27:33)

A new decade - a new reality: rethinking acoustic practice for the austerity decade, 14-15 September 2011, Crowne Plaza, Glasgow

Seaward Safetest shines at leading lighting manufacturer (08/08/2011 16:18:42)

One of the UK's leading manufacturers of commercial lighting is now using the Clare Safetest Manufacturing electrical safety tester from Seaward to improve the testing of its luminaires during production at its Castle Donington factory

KAISERTECH LAUNCHES A NEW RANGE OF VERTICAL DRIVER STANDS FROM HIOS (08/08/2011 16:11:15)

Kaisertech, the UK's leading supplier of electronic and engineering consumables and production equipment, has introduced a new range of vertical screwdriver bench stands from Hios

FLIR Systems launches FLIR T640 / FLIR T620 (08/08/2011 13:33:48)

Thermal imaging cameras for predictive maintenance inspections

Rofin's Vision for Perfect perforations (08/08/2011 13:18:40)

The consistency and quality of laser generated perforations used on product packaging has a direct influence on the shelf life and ultimately, the value of the produce within the pack

Clever Packaging, Simple Machines (08/08/2011 10:56:02)

Sweden based packaging specialist Ecolean, wanted to achieve substantially reduced filling times, clean packaging processes and easy machine operation.

New knitter-switch micro-site hosted by RS Components (08/08/2011 09:42:09)

Provides designers with full data sheets, application notes and product news

DOUGLAS DELABIE’S NEW COMFORT SHOWER SEAT (08/08/2011 09:32:13)

Removable shower seat designed for disabled and people with reduced mobility

Book provides detailed information on torque measurement technology (08/08/2011 09:20:49)

HBM technical experts, Rainer Schicker and Dr Georg Wegener, have written a 272-page reference book, "Measuring Torque Correctly" available on-line that gives a clear overview of all essential aspects of using torque transducers. Available in German, English and Italian, the book is clearly laid out and easy to understand

PlantTriage® Automatically Finds Root Cause of Upsets (08/08/2011 09:16:01)

ExperTune's PlantTriage software now automatically finds the root cause of process upsets. The latest advance, "Root Cause Finder™", automates the in-depth analysis that was previously performed by an experienced engineer

Pentair Technical Products, Hoffman Increases Service Offering in Mexico with New Warehouse and Distribution Center (05/08/2011 16:04:56)

Pentair Technical Products, Hoffman announces a new warehouse and distribution center in Reynosa, Mexico to provide improved customer service and rapid response to local product demands.

Pentair Technical Products, Hoffman Introduces Spanish Website and Dedicated Marketing Materials for Latin American Market (05/08/2011 15:22:37)

Pentair Technical Products, Hoffman announces their new Spanish website, which features translated sales and support literature

Solid State Supplies announces ultra-bright ultra-violet LED emitter with 30 W/cm2 radiant flux density (05/08/2011 15:16:29)

Solid State Supplies has introduced a 24-die, 400nm wavelength, ultra-violet LED emitter with industry-leading radiant flux of 30 W/cm2

Strong Organic Growth Fuels Acquisition For Cheshire B2B Business Marketing Agency The Scott Partnership (05/08/2011 15:01:43)

Cheshire based B2B business marketing agency The Scott Partnership Ltd announces its acquisition of life science PR agency Kapler Communications Ltd

EXPANDED PRODUCT RANGE (05/08/2011 12:32:16)

The Opti-tec range of optical adhesives and encapsulants continues to develop, and includes many with high optical clarity or other special properties related to specific optical applications such as fibre-optic termination or optical potting and encapsulation.

FlowStone Supports the Ximea Currera-R Machine Vision Camera! (05/08/2011 12:08:53)

This amazing little camera actually has an Intel Atom based PC inside capable of running the whole FlowStone graphical programming language development environment or a compiled FlowStone EXE application.

NEW SUPERHAWK PUMP OFFERS MARKET LEADING FUEL ECONOMY (05/08/2011 12:03:39)

Hidrostal UK have launched a new range of portable, solids-handling, diesel-driven pump sets under the brand name of SuperHawk, featuring Hidrostal's trusted centrifugal screw impeller and an innovative, automatic dry-priming system

Waterjet Systems Manufacturer Jet Edge Exhibiting at 2nd Annual China Aircraft Development Summit, September 22-23 (05/08/2011 09:39:40)

Jet Edge Precision Waterjets Capable of Processing Virtually Any Material

New Sync Stereo Earmuffs from Howard Leight Combine Hearing Protection with High-Fidelity Sound Quality (05/08/2011 09:34:04)

Optimising acoustic earcup design, volume management technology, and personal hearing protection, Honeywell Safety Products introduces Sync™, the next generation of stereo earmuffs from Howard Leight®. Sync delivers the appropriate level of hearing protection in hazardous noise environments along with high-fidelity stereo sound from a user's portable audio MP3 players.

Molex Secures Samtec as Second-Source Supplier for Edge Card Interconnect Trio (05/08/2011 09:25:07)

Licensing agreement brings OEMs a reliable new supplier of high performance Molex EdgeLine, EXTreme LPHPower and EXTreme Ten60Power connector portfolios

6th Annual ISA Marketing & Sales Summit Announces Keynote Speakers (05/08/2011 09:08:30)

The International Society of Automation (ISA) announces the keynote speakers for the 6th Annual ISA Marketing & Sales Summit to be held in St. Louis, Missouri, USA on 7–9 September 2011

If space is a problem - Temposonics® EH for small cylinders (04/08/2011 16:17:54)

MTS has revised the complete product family of Temposonics® E series sensors and integrated the latest developments in the field of magnetostriction

TWIFLEX MODULAR BRAKING SYSTEM ENSURES SAFETY AND RELIABILITY ON SAG MILL AT NEW COPPER AND GOLD MINE (04/08/2011 16:11:34)

When Mount Milligan Mine in British Columbia, Canada, commences production in 2013, it is anticipated that it will produce 81 million pounds of copper and 194,000 ounces of gold annually – vital at a time when demand for copper in particular is at an all time high and likely to outstrip supply for years to come

Latest torque flange features improved design for higher torques (04/08/2011 16:03:54)

HBM has launched the T40FM torque flange that can measure torques of up to 80 kNm to meet the increased requirements for torque measurement in test benches over recent years.

Parker and Farid sign cooperation agreement (04/08/2011 15:54:22)

Parker Hannifin, the global leader in motion and control technologies, has signed a cooperation agreement with Farid; a major manufacturer of waste collection and recycling vehicles and equipment.

An exciting new add-on had been added to Maplesoft’s™ MapleSim™ (04/08/2011 15:17:21)

The MapleSim Connector for dSPACE Systems is an engineering software product that provides streamlined solutions for rapid control systems prototyping with MapleSim real-time simulation.

MANUFACTURER OF PRECISION OPTICAL PRODUCTS ACHIEVES MAJOR PRODUCTION BENEFITS FOLLOWING SWITCH FROM ‘TRIKE’ TO ‘ENSOLV’ (04/08/2011 12:24:01)

World-leading specialist in the manufacture of high-precision ultraviolet and infrared optical products for scientific and industrial applications – Starna Scientific Ltd, based in Hainault, Essex, UK – reports major production benefits following its recent adoption of 'EnSolv', the cleaning solvent from EnviroTech Europe, specially formulated for critical component cleaning tasks.

ROTATING-HEAD TUBE BENDER PRODUCES ULTRA-COMPLEX PART SHAPES IN ONE FAST AUTOMATIC CYCLE (04/08/2011 12:20:12)

Today, the all-electric tube bending machine innovator Unison launches a machine with a novel rotating tool head that allows left- and right-hand bending to be performed in one rapid and continuous automatic cycle. The development greatly enhances both the ability to fabricate extremely complex tubular shapes, and to increase production throughput.

Food waste success for Börger pumps on Aran Islands (04/08/2011 12:15:22)

A Mascerator and two Rotary Lobe Pumps made by Börger are playing their part in the success of a 5-ton capacity pasteurisation plant on the Aran Island of Inis Mor, off the west coast of Ireland.

Auto engine overspeed shut down valves (04/08/2011 12:05:41)

Chalwyn, part of AMOT, has introduced a new brochure on their D-Series automatic engine overspeed shut down valves.

Latest weighing technology meets hazardous requirements (04/08/2011 11:55:18)

HBM has launched its AED9101C-Z2/22 for use in potentially explosive atmospheres

New USB to Digital Level Interface Cabling Solutions from FTDI (04/08/2011 11:42:51)

USB solutions specialist Future Technology Devices International Limited has added two new cables to its USB to digital level serial interface portfolio

Diaphragm pumps are quiet and smooth but powerful (04/08/2011 11:34:08)

Patented 5-chamber diaphragm and piston design of Aquatec 550 Series Pumps from Becktech allows them to operate at exceptionally quiet noise levels and minimal pulsations while delivering powerful flow rates up to 25 litres/min at up to 80 psi.

Rohde & Schwarz UK celebrates 40th Year (04/08/2011 11:23:44)

Rohde & Schwarz marks 40 years of service to the UK electronics industry.

Great opportunity for unsuccessful University Applicants (04/08/2011 11:21:15)

A charity which offers paid gap year internships is keeping its doors open to help some of the many university applicants who find they don't have a university place this year, having failed to meet their offered grades

ExxonMobil Research and Engineering Company and Honeywell’s UOP Form Strategic Alliance (04/08/2011 11:17:09)

ExxonMobil Research and Engineering Company and Honeywell's UOP have formed a joint marketing and licensing alliance to deliver a comprehensive suite of lube and advanced fuels hydroprocessing and engineering capabilities to companies in the refining sector.

Jet Edge Water Jet Cutting Machine Ideal for Fabricators, Machine Shops, Stone & Tile Shops (04/08/2011 11:12:34)

5'X13' Waterjet Machine Cuts Virtually Any Material without HAZ

PERKINS PUMPS UP TEST FACILITIES (04/08/2011 10:57:47)

A new motor, variable speed drive and control system designed, manufactured and installed by Softstart UK is providing Perkins Engines with enhanced facilities for testing and evaluating diesel engine fuel pump systems at its Global Engine Development centre in Peterborough.

Advantech Forms New Partnership with Industrial Video and Control (04/08/2011 10:52:03)

The Industrial Automation Group of Advantech and Industrial Video and Control, a leading supplier of industrial video solutions, announce their partnership to provide state-of-the-art video surveillance solutions

Landia mixers bring aeration solutions to composting-leachate (04/08/2011 10:41:03)

Leading mixer and pump manufacturer Landia have reported a significant increase in the number of companies now installing aeration equipment to deal with the problems caused by composting-leachate.

BENEFITS OF A FIVE-AXIS MACHINING CENTRE COMBINE WITH THOSE OF A MILL-TURN LATHE (04/08/2011 10:24:51)

2-axis rotary table on 3-axis machining centres proves ideal for manufacturing special cutting tools

COMPACT, AQUEOUS CLEANING LINE SUITS ENERGY SYSTEM MANUFACTURER (04/08/2011 10:09:31)

Energy storage and clean fuel company, ITM Power, which manufactures hydrogen energy systems at its factory in Sheffield for decarbonising transport and the built environment, has chosen an aqueous, ultrasonic cleaning line from Turbex to wash and degrease many of the components and fittings involved in the production process.

Fluke tools chosen for Industrial Control Skill testing at WorldSkills London 2011 (04/08/2011 09:59:33)

Fluke test tools, offering user safety and high productivity, have been chosen by WorldSkills London 2011 to be used by Competitors within the Industrial Control skill category at the Competition

Elscint Vibratory Bowl Feeders for feeding steel bush in two rows with escapement (04/08/2011 09:54:57)

Elscint Automation, the leading vibratory bowl feeder manufacturer (having CE Marking for its parts feeders) from India has recently manufactured a vibratory Bowl Feeder for feeding of bushes in two outlets

Automation supply chain specialist offers nine hour component delivery anywhere in Europe (04/08/2011 09:47:43)

European Automation , the Stafford based automation component supply chain specialist, has launched a premium nine hour delivery service to anywhere in Europe. The ultra fast service is intended for end users where broken components are causing expensive downtime.

XENNIA SYSTEM SALES BRING DIGITAL CERAMIC PRINTING SOLUTIONS TO INDIA (04/08/2011 09:36:05)

Xennia Technology Ltd, the world's leading industrial inkjet solutions provider, announces today the expansion of its digital ceramics business into India with the sale and installation of several Xennia Ultramarine inkjet ceramic printing systems.

New Tooling System from FasTest Delivers Electronic Actuation (04/08/2011 09:30:44)

Adjustable electronic actuation allows for inside- or outside-part testing of leak sealing integrity, as well as dependable use in industrial pick-and-place applications.

SAFETY, RELIABILITY AND EFFICIENCY: MEET THE EXPERTS AT EATON’S OIL & GAS TECHNOLOGY DAY (04/08/2011 09:26:01)

Eaton has announced it will be holding an Oil & Gas Technology Day near London on Thursday 13th October.

Manufacturing improvement specialist in the ‘DRIVE’ing seat with new programme (02/08/2011 16:25:10)

EmsPT, a division of SolutionsPT, has launched a sustainable, information-driven manufacturing improvement programme called DRIVE . The service will help companies reach specific manufacturing performance goals and improve upon them over a long period. It is intended to combat the lapse in success which often follows the early, 'easy and obvious gain' period of a traditional process improvement programme.

Nexans launches new upgraded Alsecure NX200 range of easy to handle and install fire resistant cables (02/08/2011 16:20:47)

Nexans, a worldwide leading expert in the cable industry, has launched a new upgraded version of its Alsecure NX200 range of fire resistant cables that is now even easier to handle and install, especially for stripping and termination.

New PROLINE® Overlapping Doors Feature an Industry-Leading One-Handle Design (02/08/2011 16:11:18)

Pentair Technical Products announces an enhanced single-handle design for Hoffman PROLINE® Overlapping Doors

New wave and tidal turbine concept promises clean, affordable energy (02/08/2011 16:07:01)

Practically infinite reliability was the defining requirement when researchers wanted to run a TorqSense transducer under the sea as part of extensive trials of a green energy turbine.

Catalog Data Solutions Offers BIM Content Solution for Building Product Manufacturers (02/08/2011 15:59:35)

AEC Content Veteran Joins CDS to Lead New BIM Solutions Team

Spindle drive systems - Minimal pitch deviation for maximum precision (02/08/2011 15:55:07)

Faulhaber high precision ball screws can now be integrated directly with their range of DC-Micro motors, Brushless DC-motors or Stepper motors.

3D MACHINE VISION LIBRARY ALLOWS THE USE OF CAD FILES (02/08/2011 15:50:03)

The CAD import Tool is a module of the SAL3D library that allows any user to easily generate a cloud-of-points from a CAD file.

Innovative and Successful Coating Solutions in PVD Arc and Sputter Technology (02/08/2011 15:39:58)

Sulzer Metaplas, a Sulzer Metco Company, provides innovative coating technology for its costumers for more than 25 years.

ONLY DISC SPRINGS WITH DIN 2093 COMPLIANCE OFFER TRUE ‘FIT FOR PURPOSE’ QUALITIES (02/08/2011 15:25:01)

Engineering buyers charged with the responsibility of purchasing disc spring washers or spring packs can remove any doubts regarding manufacturing quality, performance or reliability if they obtain written assurance from suppliers that the spring products conform in full to the DIN 2093 specification.

How secure is your Automation System architecture? (02/08/2011 15:17:54)

Stuxnet has given us a wakeup call and we now need to take a fresh approach to how data is transferred and managed within all industrial control systems," says Chris Evans of Mitsubishi Electric.

CoroDrill 881 optimizes small hole drilling (02/08/2011 10:42:05)

Secure hole making for smaller diameters in unstable conditions

BURKERT TO EXHIBIT INDUSTRY- IMPROVER FLUID CONTROL & FLOW PRODUCTS & PROVIDE DIDACTIC SEMINARS AT SENSORS + SYSTEMS (02/08/2011 10:35:37)

Global fluid control specialist, Burkert is supporting the new Sensors + Systems show (formerly Instrumentation) held at Farnborough on September 14th & 15th September 2011, with participation both as an exhibitor, showing the innovative ELEMENT range of hygienic and process control products, and mass flow controllers, and as an information provider – and industry improver - via the exhibition's Workshop and Seminar programme.

NSK’S AIP PROGRAMME HELPS USERS AVOID THE COSTS OF BEARING CONTAMINATION, SAFEGUARDING PRODUCTION & PROFITABILITY (02/08/2011 10:30:51)

The costs associated with premature bearing replacement, as a result of failure due to contamination, can be considerable.

Dolomite develops lab-on-a-chip device with integrated electrodes (02/08/2011 10:13:50)

Microfluidics expert Dolomite has been involved in a number of projects, integrating electrode features in microfluidic devices, combining the advantages of both microfluidics and electrochemistry.

New Rugged, Compact Non-Contact Inductive Sensors Designed for Harsh Environments (02/08/2011 10:02:47)

TURCK announces their Q-track™ family of linear position sensors has been expanded to include the newest QR14 and the Q17 models.

TDK-Lambda UK joins South West Renewable Energy Agency (02/08/2011 09:56:38)

Membership of Regen SW grants access to latest sustainable energy news

New Plastic Four-Bolt Flange Mounting Blocks with Insert Ball Bearings from QBC (01/08/2011 15:45:04)

Quality Bearings & Components, announces a new line of standard duty four-bolt flange mounting blocks that have a polyester housing, removable acetal bearing insert, with 316 stainless steel balls.

THE ANGELINI GROUP MAKES GEM ITS STEAMTRAP OF CHOICE (01/08/2011 15:35:33)

The international pharmaceutical and health-care group, Angelini, has made Thermal Energy International Inc's GEM venturi orifice steam trap its steam trap of choice following three years extensive testing.

HENRY BOOT’S NEW STANDBY POWER SYSTEM FROM shentongroup KEEPS ITS OFFICES FUNCTIONING DURING POWER OUTAGE (01/08/2011 15:30:22)

A new standby power system, supplied to Henry Boot Construction by shentongroup, has already benefited the company by protecting its HQ during a recent two hour mains power failure.

Parker Acquires SSD Korea Ltd. Strengthening Sales and Support Channel in Asia (01/08/2011 15:07:32)

Parker Hannifin Corporation, the global leader in motion and control technologies, today announced that it has acquired SSD Korea Co, Ltd. of Seoul, Korea.

Electrolube Launch New Products to Conform to the Restrictions of Dichloromethane Usage at Productronica (01/08/2011 13:52:15)

With restrictions regarding the supply of dichloromethane-based paint and coating stripping products coming into full force on 6 December 2011, the leading electro-chemical manufacturer, Electrolube, is ready to launch two new products adhering to the new law at Productronica.

Beijer Electronics present an upgraded iX version 1.30 (01/08/2011 13:45:53)

World´s most graphic HMI - upgraded, redesigned, extended

Are your bearings causing you problems? (01/08/2011 11:21:11)

Insecure mounting ? Need a minimum footprint ? Assembly difficulties ? Excessive Wear ? Misalignment ? You want minimal maintenance ? We have the answer!

New company Rhomap aims to meet the growing demand for specialist magneto-transport measurement systems (01/08/2011 11:15:22)

In the field of functional materials, the need for specialist turn-key systems is growing as scientists focus upon research into new materials and systems for the next generation of semiconductors, photovoltaics, spintronics and ferromagnetic systems.

‘Sudlows keep NHS connected with network upgrade’ (01/08/2011 11:09:02)

MANCHESTER and London based communications infrastructure specialist, Sudlows, has successfully secured a contract to design and install a modern fibre network for the Royal Bolton Hospital NHS Foundation Trust.

SST selects Rohde & Schwarz test receiver and preselector for TEMPEST testing (01/08/2011 11:03:37)

Rohde & Schwarz UK has supplied Secure Systems & Technologies Ltd (SST), operating within the Secure Systems and Information Assurance Division of API Technologies Corp., with an FSET22 Test Receiver, FSET-Z22 RF Preselector and associated equipment.

ONET TECHNOLOGIES teams up with ALGETA for ALPHARADIN commercialization (01/08/2011 10:50:31)

ONET TECHNOLOGIES UK Ltd (OTUK) has agreed to manufacture specialised hot cells for the production and commercialization of ALPHARADIN (radium-223 chloride).

Teseq Compliance 5 Software now features aerospace EMC Test Routines (01/08/2011 10:44:18)

New emission and susceptibility tests to RTCA/DO 160

GAMEWELL-FCI RETROFIT KIT OFFERS LOW-COST, HIGH-TECH FIRE ALARM UPGRADE SOLUTION (01/08/2011 10:37:52)

Luxury Hotel Renews Fire Alarm Lifespan, Acquiring Advanced, Code-Compliant Technology at Minimal Expense

Economical, twin-spindle turning centre from DMG (01/08/2011 10:33:04)

The new CTX beta 1250 4A from DMG offers two Y-axis turrets and transverse movement of a combined counter-spindle and tailstock assembly for highly productive turn-milling of complex components in one hit.

HIMA: Sales growth and new investments in services, new markets and integrated applications (01/08/2011 10:28:06)

In the 2010 business year, HIMA achieved sales of €75.1 million, an 11% increase over the previous year. For the 2011 business year, HIMA is forecasting sales to increase at an even faster pace.

SOURIAU Provides Composite Connectors for Revolutionary Solar Impulse Aircraft (01/08/2011 10:12:41)

SOURIAU is providing power and signal electrical composite connectors for the revolutionary Solar Impulse solar powered aircraft, which completed a 26-hour non-stop flight in July 2010 and is working up to circle the earth without fuel only propelled by solar energy.

GOVERNMENT MUST HELP FIRMS TO SLASH AND BURN RED TAPE (01/08/2011 10:05:58)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), responds to the Government's challenge to cut the red tape hindering UK manufacturing.

Kaisertech Launch own Brand Extraction Range (01/08/2011 09:57:56)

Kaisertech, the biggest online supplier of electronic consumables and production equipment, today announced the launch of its own range of solder fume extraction devices.

GAMBICA launches VSD energy savings calculator (01/08/2011 09:49:08)

GAMBICA has launched a simple calculator that estimates the energy savings that installing a variable speed drive on a relevant application can achieve.

At-Line Measurement Of Collagen In Meat (01/08/2011 09:44:53)

An extended range version of the InfraLab e-Series Multi-component At-Line Meat Analyser from NDC Infrared Engineering has been developed to include the measurement of collagen, as well as fat, moisture and protein. The extended range InfraLab provides a good indication of collagen levels over a 1-8% concentration range.

Molex Integrated Interconnect Solutions Deliver Innovation, Quality and Reliability for Defence Contractors (01/08/2011 09:26:31)

Migrating commercial electronic technologies into military applications for strategic cost-containment in mission-critical applications on land, sea, and in the air

TDK-Lambda acquires 2 acre plot of land adjacent to its European HQ - Redevelopment of the site will be ideal for TDK-Lambda’s future expansion plans (01/08/2011 09:20:33)

Power supply manufacturer TDK-Lambda, a group company of the TDK Corporation, is pleased to announce the purchase of a 2 acre site, which is directly adjacent to its European HQ in Ilfracombe, North Devon.

GF Piping Systems Expands Sales, Service and Distribution Capabilities with Opening of Atlanta Facility (01/08/2011 09:15:09)

GF Piping Systems announced today opening of its new warehouse and distribution facility in Atlanta, Georgia.

Latest DIL Switch from knitter-switch is sealed for applications that require “potted” or conformally-coated PCBs (28/07/2011 17:21:58)

One of Europe's leading switch manufacturers, knitter-switch, announces a new DIL switch designed specifically for mounting on PCBs that are to be "potted" or conformally-coated using cold curing compounds.

1U, 3”x 5”, 120W Multi-Output Switcher Is Most Versatile in Industry (28/07/2011 17:19:10)

UNIPOWER announced the introduction of its EASYMOD Series Model AM120. This multiple output switcher is characterized by its versatility and adaptability into practically any Medical, ITE or Industrial application. While there are several standard models, the product is really designed to optimize the power supply to the customer's Application Specific requirements.

World Machinery announces partnership with CAD/CAM software provider Lantek (28/07/2011 16:51:59)

One of the UK's leading specialist suppliers of new and used sheet metal working machinery, World Machinery has announced a software partnership deal with CAD/CAM integration specialist Lantek.

WEAR PROTECTION IMPROVES LIFE PERFORMANCE OF QUARRY PLANT IMPROVING ROI VIA INCREASED THROUGHPUT & REDUCED MAINTENANCE (28/07/2011 16:13:28)

The arduous conditions encountered in quarrying applications cause many types of plant and equipment to degrade and fail prematurely. One of the major reasons for these failures is abrasion.

Infrared thermometer combines minimised electronic with innovative LED display (28/07/2011 15:57:40)

Optris GmbH introduces the new optris CSmicro series from which especially OEM customers will benefit according to the great product potential of these infrared thermometers.

Camera combines thermal image with visual image for the first time (28/07/2011 15:54:05)

The Optris GmbH continues the market introduction of a new, extensive infrared camera series with the introduction of the optris PI200 thermal imaging camera with BI-SPECTRAL technology.

WEG LAUNCHES NEW ENERGY EFFICIENT W22X FLAMEPROOF MOTORS FOR DEMANDING OIL & GAS APPLICATIONS (28/07/2011 15:26:45)

WEG is providing global Oil and Gas markets with the highest levels of energy efficiency and protection in hazardous environments, following the launch of its new W22X range of flameproof electric motors, which are being shown for the first time in the UK at Offshore Europe 2011.

ISA Announces Recipients of 2011 ISA Educational Foundation Scholarships (28/07/2011 14:57:38)

The International Society of Automation (ISA) is proud to announce the winners of the 2011 ISA Educational Foundation Scholarships.

Q2 Financial Results: Creaform Runs Full Stride (28/07/2011 14:19:54)

High tech company strengthens its position as market leader

CHAIRMAN’S STATEMENT (28/07/2011 13:20:48)

I am delighted to announce record group results in terms of both revenue and profit for the year ended 30th June 2011.

Electric linear actuators offer a performance solution for wind turbine systems (28/07/2011 13:12:02)

As wind turbine designers look to get more and more from their systems, key areas of focus are improving efficiency and simplifying maintenance.

STAINLESS STEEL TUBE AND PIPE FITTINGS TO SUIT CUSTOMER REQUIREMENTS (28/07/2011 13:05:46)

Axium Process specialises in customised fabrication and offers manufacturers a comprehensive stock of metric and imperial stainless steel tube and pipe fittings

Manchester-based Analytical Technology Achieves Record Turnover as Water Industry Thrives (28/07/2011 12:47:56)

Specialist electrochemical sensor manufacturer Analytical Technology Inc. today announces that the company has gone from strength to strength since its inception in 1998, culminating in a record month for the business in June 2011.

FINAT to Showcase Label Community Programmes at Labelexpo Europe Excitement Builds for Operators' Day (28/07/2011 12:40:40)

FINAT, the international association for the self-adhesive label industry, will again be exhibiting at Labelexpo Europe 2011, to be held from 28 September – 1 October at the Parc des Expositions in Brussels.

NEW HIGH-SPEED BALL SCREWS RUN EXTREMELY QUIETLY (28/07/2011 10:06:16)

The machine tool industry is placing ever-increasing demands on linear drive systems in regards to traverse rates, precision, and quiet running.

INMOCO INTRODUCES STAINLESS STEEL PRECISION PLANETARY GEARHEADS FOR ARDUOUS HYGIENE- CRITICAL APPLICATIONS. (28/07/2011 10:01:19)

Inmoco has expanded its Thomson range of precision planetary gearheads with the introduction of the Micron® AquaTRUE™ Planetary gearhead.

Rittal leads the way in the dark (28/07/2011 09:53:26)

Designed to fit their full range of enclosures with minimum effort, Rittal can provide a large range of lighting and accessories for a small wall box through to a large floor standing enclosure whatever the location.

Opcon: Chinese Breakthrough within Compressor Technology (28/07/2011 09:49:02)

Agreement worth minimum of SEK 60 million, including initial development phase worth SEK 45 million

Jet Edge Exhibiting 90,000 PSI Waterjet Technology at CMTS 2011 (28/07/2011 09:41:38)

Jet Edge X-Stream Waterjets Cut Up to 50% Faster, Reduce Operating Costs up to 40%

iglidur Q2 maintenance-free, heavy-duty bearing from igus (28/07/2011 09:36:40)

Outperforms standard plastic materials under radial loads of 76 MPa

VISION™ T5 FOR MAXIMUM PRODUCTIVITY AND A TOUCH OF SIMPLICITY (28/07/2011 09:33:47)

With its new VISION™ T5 NC Control System, ESAB Cutting Systems is making its cutting machines even more productive and easier to use.

SK 500E inverter range suits lift modernisation applications (27/07/2011 16:49:56)

NORD Drivesystems versatile SK500E series frequency inverters feature a comprehensive selection of modular options and enhancements that can accommodate applications from simple speed control through to complex servo positioning.

New low cost compression load cell reduces force sensing price barrier for consumer and medical equipment OEMs (27/07/2011 16:45:35)

Variohm EuroSensor has released a new packaged compression load cell from Measurement Specialities Inc (MEAS) that combines MEMs strain gauge sensor technology with high volume manufacturing techniques to enable low-cost force sensing for a whole new class of smart consumer appliance, business equipment and medical product applications.

Flexible Greerco Mixer gives International Explosives Equipment best emulsion results (27/07/2011 16:40:19)

Greerco Colloid Mills from Chemineer are playing an important part in the success of process plant mining systems made by International Explosives Equipment (IEE), a world leader in the manufacturer of explosives equipment, based in Perth, Western Australia.

J D NEUHAUS ‘HANG TOUGH’ FOR OFFSHORE EUROPE 2011 EXHIBITION (27/07/2011 15:57:29)

The J D Neuhaus company will be showing some of their lifting and handling equipment at the Offshore Europe 2011 exhibition.

Jacobs Engineering Group Inc. Reports Earnings for the Third Quarter of Fiscal 2011 (27/07/2011 14:08:48)

Jacobs Engineering Group Inc. announced today its financial results for the third quarter of fiscal 2011 ended July 1, 2011.

Customized Linear Motion Solutions from Haydon Kerk (27/07/2011 13:43:11)

Haydon Kerk Motion Solutions prides itself on its ability to customize linear motion systems for just about any application.

OUTDATED COOLING TECHNIQUES ARE KEY CONTRIBUTOR TO SOARING ENERGY COSTS IN THE DATA CENTRE (27/07/2011 13:35:37)

Energy costs are becoming the primary concern for businesses across the UK. But how can companies safeguard themselves from the implications of the sustained rise in prices?

Siemens signs the UK’s largest order for direct drive wind turbines at Lochluichart in Scotland (27/07/2011 13:07:14)

Siemens has announced the signing of the UK's largest order for direct drive wind turbines, with a new contract to supply 17 direct drive turbines for Eneco Wind UK, at Lochluichart Wind Farm in the Scottish Highlands.

STRENGTH AND CORROSION RESISTANCE WITH FLEXIBILITY IN APPLICATION – EMKA’S 1121 STAINLESS SWINGHANDLES (27/07/2011 12:04:32)

Andy Billingham, MD of market leading "everything but the enclosure" component company EMKA, told us:

Eriez Achieves Re-certification of ISO 9001:2008 Quality Standard (27/07/2011 11:53:56)

Customer satisfaction is high on the agenda at Eriez Magnetics Europe Ltd. This drive to meet customer needs led Eriez Europe to ensure re-certification of ISO 9001:2008 standard for its quality management system.

DONALDSON EUROPE AND JOHNSEN OIL A/S SIGN STRATEGIC PARTNERSHIP AGREEMENT (27/07/2011 11:48:57)

Danish green technology and liquid filtration specialist Johnsen Oil A/S and Donaldson Europe, the European Division of Donaldson Inc., one of the world's largest filtration companies have signed a Strategic Partnership agreement to explore the possibilities of co-operation within the development and marketing of industrial hydraulic solutions.

Specifying O-rings for increased life and reliability (27/07/2011 11:34:19)

Despite most O-rings being black, their specification into fluid systems is certainly not a black art.

Compact cylinder sensor (27/07/2011 11:19:36)

Available now from ifm electronic Ltd are yet more sensors for pneumatic cylinders made in their trademark robust style, but this time featuring an integrated connector.

All bases covered (27/07/2011 11:13:15)

With the launch of the latest versions of the MK-range of pneumatic cylinder sensors ifm electronic can now offer users and OEM's alike a full range of sensors for explosion hazard areas.

FASTENER & ADHESIVES EXHIBITIONS MAKES HORSEPOWER AT THE NATIONAL MOTORCYCLE MUSEUM (27/07/2011 10:06:45)

Design engineers, production professionals and senior manufacturing managers who want to put things together better will be at the highly popular National Motorcycle Museum adjacent to the NEC on 20th October this year.

Value of apprenticeships proven by senior appointment at Cressall (27/07/2011 10:02:08)

Andrew Keith's promotion follows a successful placement year and permanent employment offer

XENNIA TO UNVEIL ITS DIGITAL TEXTILE PRINTING SOLUTIONS AT ITMA 2011 (27/07/2011 09:43:31)

Xennia Technology, the world's leading industrial inkjet solutions provider, will be demonstrating its range of inkjet printers and inks for digital textile decoration at ITMA, the International Exhibition of Textile Machinery, in Barcelona on 22-29 September 2011.

Atkins Expands Strategic Adoption of Autodesk BIM Technology (27/07/2011 09:35:13)

U.K.'s Largest Engineering and Design Firm Signs £5.3 Million Multiyear Agreement with Autodesk to Drive Building Information Modeling Across Worldwide Projects

China Steel of Sault Ste. Marie, Ontario Installs Massive 24’x13’ 90KSI Jet Edge Waterjet Cutting Machine (27/07/2011 09:19:43)

Diversified Metal Fabricator and Machine Shop Capable of Processing Virtually Any Material up to 50% Faster than Most Waterjet Shops

New Banner Engineering TM18 Photoelectric Sensor Features Metal Housing for Harsh Environments (27/07/2011 09:13:02)

Banner Engineering Corp. introduces a new version of its TM18 EZ-BEAM compact photoelectric sensor for use in heavy duty environments.

POWERLEAN™ In-row Cooling Unit Delivers High Cooling Capacity, Superior Energy Efficiency and Quiet Operation for Data Centers (27/07/2011 09:06:41)

Pentair Technical Products, McLean introduces the POWERLEAN™ In-row Cooling Unit.

New standalone multi-axis drive and motion control system has flexibility for basic to advanced positioning applications (26/07/2011 16:19:43)

Flexible choice of hardware, software and interfacing options make new rack-mount multi-axis motion control and drive system adaptable to a very wide range of positioning applications

Large-size bearing from NKE ensures a smooth rolling process in steel pipe manufacturing (26/07/2011 15:54:52)

Bearing specialist NKE Austria GmbH has supplied a special cylindrical roller bearing with an outer diameter of 3.3 m for the application in a three-roller planetary rolling mill.

Automotive grade 3-phase MOSFET pre-driver IC for brushless DC motor control (26/07/2011 15:46:41)

The new A4933 from Allegro MicroSystems Europe is an automotive-grade 3-phase MOSFET pre-driver IC for the control of brushless DC motors in applications such as electronic power steering systems, engine cooling fans, transmission actuators and hydraulic pumps.

New cart: More mobility and versatility for marking machines (26/07/2011 13:09:31)

SIC Marking launches a new cart (trolley for portable marking machines) to improve user mobility and autonomy when performing marking on heavy, bulky or hard-to-access parts.

Racing transmissions manufacturer uses blower-powered dryer to speed up manufacturing processes (26/07/2011 12:53:37)

For every action there is a reaction, a law of physics with which specialist designer and manufacturer of high-performance transmissions XTRAC of Berkshire is very familiar due to the nature of its area of engineering expertise.

E-Mobility Made in Munich – iwis develops innovative chain drive for electric bicycles (26/07/2011 12:08:11)

iwis introduced an innovative new drive system for electric bicycles with a built-in chain drive at this year's Hannover Fair. The drive has been developed in co-operation with Clean Mobile, a German manufacturer of electric drive systems for two-wheeled vehicles.

INTERTRONICS – KEEPING “COOL” ELECTRONICS FROM GETTING HOT! (26/07/2011 11:50:29)

The relentless march of Moore's Law and the spread of application for high power electronic devices – especially the widening use of LED's, increasingly bring forward the problem of heat dissipation.

NOVEL MEMBRANE FILTERS POWER ULTRA-COMPACT WASTEWATER PLANT FOR 'VENICE'S GARDEN' - THE ISLAND OF SANT'ERASMO (26/07/2011 11:44:32)

High-throughput filtration membranes are at the heart of an extremely compact wastewater treatment plant on Sant'Erasmo island in the Venice lagoon.

DIALINE PROVIDES CUSTOMISABLE WATERJET CUTTING HEAD SOLUTION (26/07/2011 11:16:42)

AccuStream has introduced what it claims to be the industry's first customisable waterjet cutting head.

Heriot-Watt University hosts Scottish launch of versatile automated gauge (26/07/2011 10:47:47)

A unique, new advanced process control gauging system has been showcased in Scotland at a leading industry event hosted by Heriot-Watt University.

Boldman has developed a cost-effective, reconfigurable, modular guarding and enclosure system for machine tools, robotic cells and personnel protection. (26/07/2011 10:42:32)

Boldman offers a wide range of enclosures, machine and perimeter guarding options for creating physical barriers to protect personnel.

BURKERT EXPANDS AESTHETIC CLEAN LINE ELEMENT RANGE WITH NEW ‘FUTURE-PROOFED’ STAINLESS STEEL DIGITAL FLOW TRANSMITTERS (26/07/2011 10:37:09)

Bürkert Fluid Control Systems has expanded its ELEMENT modular stainless steel range of products for total solutions in process measurement and control, with new Type 8026, 8036 and 8076 digital flow transmitters.

Improved production processes ensure interchangeability (26/07/2011 10:29:46)

High precision despite combinable carriages and rails: this is the key advantage of a new series of linear guides. This innovation is made possible by optimised production processes for the guide rails. NSK will be showcasing the PH series – which provides highly precise linear movements in machine tools – at the EMO trade fair.

sara LBS helps increase energy efficiency and plan full life costs for doors (26/07/2011 10:13:44)

In the current climate of increasing energy costs and decreasing budgets, maintenance and procurement managers need to search out the most efficient technologies.

MORE ADVANCED APPRENTICESHIPS WILL MANUFACTURE SUCCESS, SAYS INDUSTRY LEADER (26/07/2011 10:06:09)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), has welcomed a government announcement to provide funding for 10,000 higher and advanced apprenticeship places, saying that a focus on high skilled workers is vital if industries like manufacturing and engineering are to prosper.

Abba Commercials - appointed agents for Edbro skip and hook-lift equipment for North Wales and South East England (26/07/2011 09:51:43)

Abba Commercials, well known commercial vehicle bodybuilders for the construction and civil engineering sector, will be acting as the main distributer of Edbro's range of hydraulic skip-loader and hook-lift systems in the South East of England, North Wales and surrounding areas – including Merseyside, Cheshire, Preston and Fyled.

BEAMA GOES ON THE ROAD (26/07/2011 09:25:53)

BEAMA's Autumn roadshow will highlight how housebuilders and registered social landlords can maximise energy and CO2 savings from electrical heating and ventilation.

QuadriSpace introduces Share3D PDF at $99 for quick-turn 3D PDF publishing (26/07/2011 09:16:41)

QuadriSpace products are used worldwide to create documents, illustrations and animations from 3D CAD models and then share 3D information with others through standard formats.

BEI Kimco Magnetics' BLDC Motor Solves Challenging Application Requirements for 2.0 HP 200 Degree Celsius Capabilities (26/07/2011 09:10:45)

BEI Kimco Magnetics, a company of Custom Sensors & Technologies (CST), Inc., recently met the challenging Brushless DC Motor requirements utilized in a Down Hole Oil Exploration application.

Meggitt Sensing Systems releases comprehensive online industrial vibration training course (26/07/2011 09:05:17)

Meggitt, the maker of Wilcoxon Research vibration sensors and accessories, has released all seven videos in a series of narrated presentations about vibration monitoring.

Siemens wins national safety award for work at Severn Power (25/07/2011 16:26:56)

Siemens celebrates its success in the National Joint Council Engineering and Construction Safety awards

TARGETING 'NO FAILURE, NO DOWNTIME' INSTRUMENTATION SYSTEMS ON TOMORROW'S OFFSHORE PROJECTS (25/07/2011 15:41:32)

Innovative solutions that eliminate most of the common sources of problems on fluid instrumentation and hydraulic control systems will be highlighted at Offshore Europe 2011 by the instrumentation products division of Parker Hannifin - the global leader in motion and control technologies. Groundbreaking development work has led to the company's small-bore fitting, valve and manifold products incorporating many novel features that greatly reduce the risk of system failure, leaks and process downtime.

Automated warehouse guarding designed, manufactured and installed (25/07/2011 15:36:11)

Procter Machine Guarding has designed, manufactured and installed bespoke automated warehouse guarding for one of Europe's largest automated high-bay warehouses, situated in Spain, which is owned by a global fashion retailer.

SILENT KNIGHT FIRE ALARMS PROTECT SCHOOLS THROUGHOUT CENTRAL FLORIDA COUNTY (25/07/2011 15:07:55)

Marion County School District Continues Farenhyt System Upgrades

True grit as Ovivo complete 2,500th installation (25/07/2011 14:33:06)

Ovivo has completed the installation of its 2,500th Jeta® Grit Trap* - which is designed to achieve the highest possible industry standard grit removal performance; 95% removal of grit particles (0:2mm and above/2.65 specific gravity).

UK tourism booms with PLC magic (25/07/2011 14:00:07)

The Suffolk coastal resort of Southwold is booming as the 'staycation' becomes the holiday of choice for many British families. One of its most popular attractions is the refurbished pier which, thanks to Mitsubishi controllers and a truly original-thinking engineer, combines Edwardian elegance with surreal amusements.

SUPACET 5 HEAVY DUTY WELDING AND CUTTING OUTFIT (25/07/2011 13:48:56)

The Murex Saffire SupAcet 5 welding and cutting outfit is a comprehensive package, providing a full heavy duty welding and cutting capability.

New gateway from HMS enables CAN-devices to connect to industrial networks (25/07/2011 13:14:43)

the Anybus® communicator CAN is a new protocol converter from HMS industrial Networks. The gateway enables communication between any industrial device with a CAN interface and industrial networks such as Profibus, Profinet, DeviceNet, EtherNetIP, EtherCAT or CANopen.

ONET TECHNOLOGIES sets up joint venture with PCI Ltd of India (25/07/2011 13:10:05)

Nuclear-industry services provider ONET TECHNOLOGIES of France has decided to invest in India's civil nuclear industry by setting up an engineering joint venture with PCI Ltd, part of PRIME Group of India. ONET TECHNOLOGIES holds 70% of the shares in the joint venture and PCI Ltd the remaining 30%. The new business is to be called ONET TECHNOLOGIES INDIA.

NEW AC/DC HF TIG INVERTER WELDER FROM WELDABILITY-SIF (25/07/2011 12:57:54)

The TIG200 AC/DC HF inverter TIG welder from Weldability-SIF, the UK based supplier of MIG, TIG, MMA, Spot and Oxy/Fuel welding and Plasma cutting machines, torches, accessories, consumables and personal protective equipment, is a new, professional, micro-processor controlled inverter power source for both TIG and MMA welding applications and is ideal for fabricators and repair/restorers who wish to economically begin TIG welding of aluminium.

HIGH RESOLUTION DIGITAL FLOOR MOUNTED BIAXIAL TILTMETER. (25/07/2011 11:52:33)

ETLG Inertial Aerosystems is introducing a high resolution digital, floor mounted biaxial tiltmeter manufactured by Applied Geomechanics.

ALL-IN-ONE MACHINE CONTROLLER SIMPLIFIES DEVELOPMENT OF ADVANCED NEW PLASMA TUBE CUTTER (25/07/2011 11:43:52)

An innovative new plasma cutting machine for flue pipes has been developed by Techserv Cutting Systems, the specialist manufacturer of CNC profile cutting systems. Advanced interpolated motion of the cutting system is used to dramatically increase production throughput – using an economic real-time machine control module from Baldor.

SKILLED WORKER SCHEME MUST BE SUPPORTED BY ONGOING TRAINING (25/07/2011 11:39:20)

The introduction of a new scheme to get skilled workers back into jobs has been welcomed by vocational awarding body EAL, but the industry expert warns that more needs to be done to avoid a skills crisis in manufacturing.

High performance Optical timing reference source (25/07/2011 11:34:25)

Armstrong Optical Ltd., has expanded its range of optical timing reference sources with the introduction of the FLP – Fibre Laser Pulser.

IP65 ANTI-ROTATION LATCH FROM ELESA (25/07/2011 11:13:09)

Elesa's new IP65 CSMT-A T handle latch is a novel new design incorporating an anti-rotational device which prevents the handle (and the closing lever/cam/tab) from rotating accidentally, e.g. through vibration or buffeting. It is especially suited to use on cabinets and access doors where this may be an issue.

YASKAWA and MOTOMAN have merged under the name ‘YASKAWA Europe’ (25/07/2011 11:08:43)

The merger of the two YASKAWA subsidiaries, specialists for the production of servo and inverter drives and robots respectively, is in line with the company's new marketing strategy for the world of automation.

Delta Tau tales of motion control (25/07/2011 10:58:10)

Around the world Delta Tau is at the forefront of physics in motion.

Schaeffler to bundle its electric mobility expertise in the eMobility Systems Division and create new jobs (25/07/2011 10:47:33)

Schaeffler Pursues Holistic Approach with Regard to Electric Mobility

Introducing EasyNest™ Automatic Nesting for the Vision T5 CNC (25/07/2011 10:07:46)

ESAB Welding & Cutting Products introduces EasyNest™, an optional feature that adds automatic true-shape nesting capabilities to its Vision T5 CNC.

Turning Theatrical Visions into Reality with State-of-the-art Technology (25/07/2011 09:47:46)

As The Drive & Control Company, Bosch Rexroth is a leading force in stage technology. By providing solutions to meet the most sophisticated requirements, stage directors can be confident of an enhanced experience for the audience.

OVEN MANUFACTURER TURNS TO SERAPID FOR HELP WITH SPACE CONSTRAINTS IN OVEN LOADING (25/07/2011 09:14:16)

SERAPID's compact push/pull chain integrated into ovens with space constraints

IN-HOUSE DRILL SHARPENING LEADS TO BIG SAVINGS (22/07/2011 16:27:57)

An economical way to reduce consumable costs associated with deep-hole drilling of nickel alloys and stainless steels has been adopted by oil and gas advanced machining specialist, Evenort. Located in Dinnington, near Sheffield, the company is saving around £1,000 per month by not sending solid carbide twist drills away to be resharpened

MEDICAL PARTS PROGRAMMED SIX TIMES FASTER, BOOSTING OUTPUT BY 50 PER CENT (22/07/2011 16:07:55)

Galway-based subcontract machinist, Dawnlough, which specialises in manufacturing components for the medical industry, has bought equipment to the value of £1.5 million since 2005 to expand its design, production and inspection capabilities

Northampton MP meets new apprentice at local subcontractor (22/07/2011 15:59:58)

In the last 12 months, Tom Bennett and his son, Rob, have advanced significantly their subcontract business, Scot Bennett Engineering Limited, partly by installing modern CNC turning plant including a Star SR-20J sliding-headstock mill-turn centre. At the same time, they sold off their final six single-spindle cam automatics.

SUBCONTRACTOR EXPLOITS HIGH-SPEED AND 5-AXIS MACHINING TO RAISE COMPETITIVENESS (22/07/2011 15:47:32)

An aluminium billet was put on a new Brother TC-22B-O vertical machining centre shortly after it arrived last summer (2010) at the Crediton works of Adaero Precision Components.

HYDRAULIC CYLINDER SLASHES POWER CONSUMPTION (22/07/2011 15:42:44)

Companies developing and building lathes with a spindle speed of up to 5,600 rpm have the option of fitting a new, hydraulically actuated, rotary chuck cylinder that typically consumes 1.5 kilowatt-hours over a daily shift, compared with 36 kilowatt-hours for a conventional cylinder. The reduction is nearly 96 per cent and equates to a saving of more than 19 kg of carbon dioxide.

BORRI'S NEW SINGLE PHASE COMPACT UPS IS BIG ON POWER MANAGEMENT (22/07/2011 14:30:59)

Leading UK suppliers of Uninterruptible Power Supply solutions, Borri Ltd, has launched an exciting new range of compact, reliable and ultra-efficient UPS systems, which when used in On-line double conversion mode, offer the highest possible levels of protection for organisations requiring pure, true, uninterrupted power.

CHINA VOCATIONAL QUALIFICATIONS AGREEMENT WELCOMED BY INDUSTRY LEADER (22/07/2011 12:33:07)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), says that a memorandum of understanding between the UK and China will provide exciting opportunities for learners and demonstrates the government's commitment to vocational education.

FTIR Gas Monitoring Seminar a Huge Success (22/07/2011 11:37:36)

Quantitech recently organised a very popular seminar focusing on multiparameter gas detection for both ambient and stack monitoring applications.

Local industrial automation company participates in Tatton Flower Show (22/07/2011 11:32:37)

Seven staff from Cheadle based SolutionsPT volunteered their time to help create a garden at the Royal Horticultural Society Tatton Flower Show on Thursday, July 14. Entitled Embrace, the garden celebrated the 40th anniversary of St Ann's Hospice in Manchester and was designed by up and coming garden designer Sharon Hockenhull.

IP65 TUNNEL SAFETY SYSTEMS FROM FDB PANEL FITTINGS (22/07/2011 11:22:19)

UK market-leading panel fittings specialists at FDB have taken a particular focus on an IP65 range of products for the tunnel/traffic control environment, where safety and reliability are of course paramount and primarily involves the use of high quality stainless steel ¼ turn locks, swinghandles and hinges with matching grade gaskets.

AUTOMATED POLISHING OF MOULDS TO REPLACE MANUAL FINISHING (22/07/2011 11:18:46)

Designed for finishing glass press moulds, the process is suitable for polishing moulds of any material designed to manufacture super-high-precision components

MARSH BELLOFRAM ADDS AIR PREPARATION EQUIPMENT TO THEIR RANGE (22/07/2011 10:36:17)

The Marsh Bellofram company have been appointed as UK distributors for the Shavo range of air preparation equipment, combining durability and performance while representing excellent value for money.

Mechatrolink Membership Reaches 900 Companies (22/07/2011 10:26:36)

Mechatrolink members association is growing fast in North America, with 50 of its 900 member companies located in the U.S. and Canada

The Giga-tronics 2500B series high-performance microwave signal generators are now available with more options and new lower prices! (22/07/2011 10:16:56)

Top-of-the-line signal generator performance at economy signal generator prices. Don't buy an entry-level signal generator and compromise your test, when you can get premium performance at cost-effective pricing. More value for your dollar without risk.

Bottles line up for Palletiser (22/07/2011 10:11:56)

More success stories from the most diverse applications which partners Micromech Systems and Parker has been supporting for food processing equipment and packaging machinery manufacturers.

Molex to demonstrate defence industry expertise at DSEi 2011 - Connectivity solutions that give systems a tactical advantage (22/07/2011 10:07:40)

Molex, a global leader in the development and manufacture of connectors and interconnection systems, will demonstrate its in-depth knowledge and expertise of the aerospace and defence industry at this year's DSEi Exhibition. A wide range of connector solutions will be on display that meets the demand for ever more rugged, high-reliability and lightweight products with industry-leading EMC performance and throughput efficiency.

Atlas Copco Compressors launches Customer Care Charter (22/07/2011 09:33:12)

Atlas Copco Compressors has launched a Customer Care Charter to demonstrate its commitment to providing innovative solutions that meet its customers' exacting requirements.

Two further Green Belts awarded for Lean Six-Sigma at TDK-Lambda - Identifying process improvements (22/07/2011 09:21:31)

Power supply manufacturer TDK-Lambda UK, a group company of the TDK Corporation, is pleased to announce that two more members of its production team have attained Green Belt status in Lean Six-Sigma techniques.

igus to show its dynamic cabling solutions at Sensors + Systems 2011 (22/07/2011 09:11:40)

At this year's Sensors + Systems show at FIVE in Farnborough, igus UK will be launching the latest additions to its chainflex® cables that are developed specifically for use in dynamic applications.

Unique Foams on Display (21/07/2011 16:20:47)

Zotefoams, the foam technologists, will be showing its wide range of closed-cell foams at Interplas 2011 along with parts and components made from these materials.

Morgan AM&T sponsors world gathering of industry experts at Carbon 2011, Shanghai (21/07/2011 16:09:32)

Underlines Morgan AM&T pioneering role as innovator in development of carbon technologies - World leading advanced materials and technology specialist Morgan AM&T has teamed up with Carbon 2011 to sponsor the annual scientific gathering of carbon experts.

Strategic Simulation and Analysis appointed as reseller by Dassault Systèmes SIMULIA (21/07/2011 15:51:12)

Dassault Systèmes has appointed SSA as a SIMULIA reseller to enhance its analysis offering to the UK market. SSA will use its expertise within the engineering market to sell the full range of SIMULIA products and strengthen its consultancy base.

REVOLVO SPLIT ROLLER BEARINGS CAN REDUCE BEARING DOWNTIME BY UP TO 90 PERCENT & IMPROVE BEARING LIFE IN STEELMAKING APPLICATIONS. (21/07/2011 15:34:43)

The constant cost-down pressures in the steel manufacturing process mean that failures in the continuous production operation are extremely costly. Bearings of course, are fundamental components in all steelmaking production machinery. Therefore, despite the many operational challenges, bearing manufacturers are constantly under pressure to provide ever increasing levels of reliability and operating life from their products.

LOOKING AT THE FUTURE OF PROCESSING AND PACKAGING MACHINES - jellyfish, elephants’ trunks and fish tails – what can they teach us for tomorrow's automation? (21/07/2011 15:14:53)

Festo is supporting the PPMA show by demonstrating how automation technology of the future can employ principles adapted from nature. As the innovation leader in pneumatic and electric drive technology, Festo sponsors a Bionic Learning Network of leading academics, research institutes and partner companies to explore, understand and find applications for lessons from nature. Applications developed from this knowledge network include new adaptive grippers, energy saving handling systems and new concepts for sensing and communications.

Electrolube Exhibits New ‘Green Products’ at AATE Stand 750 (21/07/2011 15:00:40)

Electrolube will exhibit a wide range of high performance electro-chemicals for electronics, automotive and industrial manufacturing at Assembly and Automation Technology Expo, in Chicago during September.

Tanks target South East Asia as Franklin Hodge create new joint venture in Singapore (21/07/2011 14:45:19)

Franklin Hodge has completed an important deal with Pan Asian Holdings (formerly Pan Asian Water Solutions) of Singapore to create a new joint venture company that is aimed at increasing sales of its bespoke water tanks to the fast-expanding Asian market.

Ultra bright UV light source launched by Ultrafine (21/07/2011 13:02:15)

An ultra bright, portable, ultraviolet light source that enables fluorescence to be viewed even in full daylight has been launched by Ultrafine Technology. The Superlite 100 is a compact unit that takes advantage of breakthroughs in lamp technology to produce greatly increased output.

PUTTING LOAD HANDLING SAFETY INTO PROPORTION (21/07/2011 12:57:08)

Thirty one percent of all fatal, serious and over-three-day injuries reported by the HSE for the year ending April 2010 were related to manual handling. A further 30% were caused by slips, trips and falls on the same level and 9% to falls from any height.

Power modules for fast switching motor drive applications - The ideal power module solution for fast switching motor drives (21/07/2011 12:48:37)

Most of the current high power semiconductors are optimized for switching frequencies between 4 and 8 kHz. Today, however, more and more applications require frequencies of 10 kHz and higher. New power modules specifically designed for higher frequencies can now fill that gap.

EEF leads Red Tape Challenge for Manufacturers (21/07/2011 12:26:16)

Manufacturing companies are being urged to get involved in the government's 'Red Tape Challenge' (RTC) and start to dismantle some of the barriers holding them back from growing their businesses.

Free PSG Process Audit for reduced energy consumption (21/07/2011 12:12:54)

The Process Solutions Group (PSG), which brings together expertise of four Robbins & Myers' companies, is offering a Free Process Audit for any business looking to enhance its productivity and reduce energy consumption.

Automatic Floor Scrubbers from Advance Receive National Floor Safety Institute Product Certification (21/07/2011 12:02:43)

Advance, a world-leading manufacturer of professional floor cleaning equipment, offers automatic floor scrubbers that meet the requirements for National Floor Safety Institute product certification.

Hitachi High-Technologies Launches New SU8000 Family of Field Emission Scanning Electron Microscopes (21/07/2011 11:53:38)

Hitachi High-Technologies has launched the SU8000 family of ultra high resolution field emission scanning electron microscopes for investigating the fine surface structure of materials in a wide range of nanotechnology fields.

Sandvik Coromant introduces new thread whirling inserts and holders for sliding head lathes (21/07/2011 11:43:26)

Bone screw and medical implant parts to benefit from enhanced threading technology - Increasing demand for technology that can produce thread forms quickly and at high tolerances using sliding head machines has led to the introduction by Sandvik Coromant of new CoroMill 325® thread whirling inserts and holders for medical applications.

Sensortechnics Offers Honeywell’s New Silicon Pressure Sensors with Single Side Liquid Media Option (21/07/2011 11:39:32)

As a leading sensor expert in the development, manufacture and distribution of high quality pressure sensors and sensing systems Sensortechnics offers its customers extensive technical consultancy.

FINAT Congress 2011: a new President, an industry roundtable and leading label companies celebrated (21/07/2011 11:31:34)

The 2011 FINAT Congress proved a major success, with the appointment of a new President, a raft of awards handed out to top-performing label companies, and the hot topics of the label industry debated at a roundtable. The event was staged on June 8-10 in Giardini Naxos, Italy, and attracted around 380 delegates from 150 companies.

ESAB WINS WELDING EQUIPMENT ORDER IN ABU DHABI (21/07/2011 11:26:57)

ESAB, a world leading supplier of welding and cutting equipment has won a US$2.56M order from a leading contractors in the UAE to supply nearly 1400 welding machines for two projects in Abu Dhabi. Deliveries are scheduled to run up to May 2012.

Fluke tools chosen for Electronics Skill testing at WorldSkills London 2011 (21/07/2011 11:20:15)

Fluke test tools, with rapid troubleshooting capabilities, have been chosen by WorldSkills London 2011 to be used by Competitors within the Electronics category at the Competition, which will be held over four days at ExCeL London from 5-8 October 2011.

School children are being convinced that Engineers don’t have dirty hands (21/07/2011 11:15:55)

Is the image of engineering and science changing for the better? Tom Pellereau has been making engineering and design sexy by grabbing the headlines in the Apprentice, and this summer 2,300 students aged 12-14 have also changed their views about science and engineering.

BALDOR BOOSTS PERFORMANCE OF FAVOURITE DODGE TAPERED ROLLER BEARING (21/07/2011 11:12:33)

Baldor has released a new version of the Dodge Type E-Xtra tapered roller bearing featuring the highest load ratings and most advanced sealing system in the industry.

Powerstax Unveil Growing Range of MIL and COTS Power Solutions at DESi 2011 (21/07/2011 11:05:50)

Powerstax, one of Europe's leading application-rich power solutions specialists, will be displaying their growing range of standard and custom COTs power solutions for MIL and non-tactical applications at this year's DESi exhibition.

LCM Systems Expands Premises to Offer Ex-Stock Load Cells (21/07/2011 11:01:21)

Thanks to ever-increasing sales and the desire to keep a larger stock of popular standard products, so improving delivery times for customers, specialist load cell technology company, LCM Systems, is expanding its current production facilities on the Isle of Wight, UK.

New WEATHERFLO® HD Variable Frequency Drive Solution Protects and Cools up to 500 HP Variable Frequency Drives in Extreme Outdoor Environments (21/07/2011 10:51:57)

Pentair Technical Products introduces the Hoffman WEATHERFLO® HD VFD solution for ensuring sustained operation of heavy-duty variable frequency drives (VFDs) in demanding outdoor environments.

ABLE wins multimillion dollar contract for flow meters in Australian gas field (21/07/2011 10:44:27)

ABLE Instruments & Controls, a leading supplier of instrumentation and control solutions in process industries, has announced the award of a multimillion dollar contract order to supply flow meters to the natural gas processing facility within the Chevron-operated Gorgon Project in Australia, one of the world's largest natural gas projects.

University of Leicester develops test for classifying force used in bottle stabbings (21/07/2011 10:39:39)

Engineers at the University of Leicester have for the first time created a way of measuring how much force is used during a stabbing using a broken bottle. The advance is expected to have significant implications for legal forensics.

NSK ‘GREEN ENGINEERING’ PROGRAMME ACHIEVES UP TO 47 PERCENT CUT IN POWER CONSUMPTION FOR BEARINGS USED IN DOMESTIC APPLIANCES (19/07/2011 16:11:15)

Rolling bearings are indispensable to machinery and equipment; their function is crucial in the role of transferring rotational energy with minimal energy loss: i.e. energy conservation. At the same time bearings can play a major role in the preservation of natural resources by providing enhanced operating life, and also through downsizing as a result of the combination of improved materials and optimised design.

IDC’S COMPACT WIRELESS OPERATED POWER BLOCK DELIVERS ENERGY SAVING BY AUTOMATICALLY SWITCHING OFF NON ESSENTIAL EQUIPMENT (19/07/2011 16:07:27)

IDC has launched the ZB116, a smaller version of its energy saving power blocks, providing a low cost, wireless operated switch with remote power monitoring, which reduces energy consumption by automatically powering down non essential equipment in typical applications such as lighting, heating, air-conditioning and IT data centres.

The perfect Yorkshire pudding has helped Mitsubishi Electric to win a prestigious technology award at the food processing industry’s most important annual event, Appetite for Engineering (19/07/2011 15:51:03)

Mitsubishi provided sophisticated modern drive and control equipment to WMH Automation UK so it could develop a servo-based system that irons out the inaccuracies of batter pumping for a frozen food manufacturer. The system consisted of a 10 axis J3 servo drive arrangement, with each axis linked to Mitsubishi's high-speed SSC motion control network. Nine of the axes are dedicated to the depositors, each driving 32 pump chambers. The servos are each programmed with a map of known volume to be dispensed and the required number of rotations can be calculated depending on the required product settings.

EOS AND EADS COLLABORATE ON ECO-ASSESSMENT OF DIRECT METAL LASER-SINTERING TECHNOLOGY (19/07/2011 14:57:28)

The study will look at generating savings in the use of energy and raw materials - EOS, the world's leading manufacturer of laser-sintering systems, in collaboration with EADS Group's research and technology production facility, EADS Innovation Works (IW), has begun a study to understand the potential of the direct metal laser-sintering (DMLS) process to generate savings in the use of energy and raw materials. It will help to develop a new range of manufacturing technologies that will integrate sustainability-relevant features into products and product manufacturing.

‘Siemens rely on Breezair for temperature critical environment’ (19/07/2011 14:27:00)

Leading industry experts, Cosaf, have highlighted their commitment to HVAC excellence with a highly complex contract win at Siemens Congleton.

NEW 5/6-AXIS MACHINING CENTRE FOR CUTTING TITANIUM - Makino T2 launched in Europe on 7th July 2011 at NCMT's Coventry technical centre (19/07/2011 11:17:36)

New aircraft have to fulfil ever-higher standards of efficiency to reduce emission levels, so increasing use is being made of titanium to take advantage of its lightness and strength. Fifteen per cent of the extra-wide-body version of the Airbus A350 by weight will be titanium, compared with five per cent of the A300 and nine per cent of the A380. Titanium is used widely in all three variants of the F-35 Lightening II (Joint Strike Fighter) and Lockheed Martin has identified its machining as a significant cost driver.

igus goes green at Interplas 2011 with new environmentally-friendly biopolymer bearing (19/07/2011 09:18:59)

At this year's Interplas exhibition at the NEC in Birmingham, igus UK will be launching the latest additions to its maintenance free range of plain, spherical and linear bearings, as well as energy chains and chainflex® cables.

PRIMETEST 350 WINS OFFICE TEST SEAL OF APPROVAL (18/07/2011 16:54:17)

Investment in new electrical test technology is helping one of the UK's leading providers of workplace compliance, safety and maintenance services to improve productivity levels and enhance its offering to clients.

Barrett Steel going green (18/07/2011 16:45:52)

Barrett Steel is sharpening up its 'green' credentials by embarking on a campaign to reduce its carbon footprint across all company sites. As part of the campaign the group is working towards the environmental standard ISO 14000 and as a result has already implemented a number of initiatives to reduce electricity, water and fuel consumption, optimise raw material use and become more energy efficient in production processes.

Linkwave Signs GPS Module Distribution Agreement With Furuno (18/07/2011 16:38:55)

Linkwave Technologies Ltd, the value added distributor of wireless connectivity devices, announced today that the Company has signed a distribution agreement with FURUNO

SAICA PLANT IS A RECORD-BREAKER AFTER OPTIMA-ISATION (18/07/2011 16:26:42)

Saica Packaging Ltd has achieved record-breaking productivity levels for the company's UK operations following a drives and controls upgrade by Optima Control Solutions Ltd (OCS) on a corrugating line at its Edinburgh plant.

Design collaboration produces tooling 'right first time' (18/07/2011 10:53:39)

Devon based DeltaCAD Ltd, a start-up company who specialise in CADCAM services has recently collaborated with sub contract tooling maunfacturer Casting Support Systems Ltd on a project to provide a leading Aerospace company with aluminium tooling for a carbon composite seat shell for a major civil airline compnay.

GOVERNMENT MUST DELIVER ON APPRENTICESHIP PLANS (18/07/2011 10:50:30)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), has welcomed skills minster John Hayes' plans last week to reduce bureaucracy for micro-firms looking to take on apprentices, but warns that wider action is needed if Britain is to avoid a shortage of skilled labour.

Chronos BTH participation at PPMA 2011 (18/07/2011 10:45:42)

Chronos BTH is recognised worldwide for its customised and innovative weighing, bagging, baling, palletising and load securing solutions for various industries. We offer manual, semi-automatic, fully automated or turnkey solutions for bagging bulk materials in the Food, Feed, Chemicals, Minerals and Horticulture industries. Our BAGGING portfolio includes open-mouth bagging systems, valve bagging systems, horizontal and vertical FFS systems and filling systems for flexible and rigid containers.

Life-Saving Fire Protection: Ceresana Analyses the Flame Retardant Market (18/07/2011 10:41:04)

Cell phones, carpets, or insulating sheets – flame retardants are used in numerous everyday products to prevent them from being burnt or at least to slow down a fire in an emergency. As more and more plastics and other flammable materials are used, flame retardants are gaining increasing importance. The new market study by Ceresana Research forecasts that global flame retardant revenues will rise to approximately US$5.8 billion by 2018. Demand is above all growing in the Asia-Pacific region, with China registering the greatest increase of 7% per year.

The intelligent conveyor chain for pick and place solutions (18/07/2011 09:04:12)

The igus pickchain is a new concept of conveyor chain. It has 'intelligent' links that can have actuators such as suction cups, grippers, tools, sensors and cameras attached to them which can be individually programmed. The pickchain integrates cable and hose supplies which give the necessary energy and data for the intelligence.

Major new Chinese pharmaceutical plant chooses Pfaudler for glass-lined vessels and TCUs (18/07/2011 08:59:21)

Pfaudler has won a contract to supply forty-three glass-lined reactor vessels and nine Thermal Control Units (TCUs) for a major new pharmaceutical plant in Southern China.

Audio Grilles with Style (15/07/2011 16:20:27)

Precision Micro supplies a variety of decorative etched components to the automotive industry and is possibly the largest manufacturer of bespoke, metal audio grilles in Europe. Located in the UK motor industry's heartland, the Company has a history of supplying metal speaker grilles for many of the leading marques. Precision etched in a single process, an etched speaker grille can be both aesthetically pleasing and functional. The etched pattern can incorporate a variety of aperture shapes and can include part etched logos and discrete part numbers on the reverse side.

CC-LINK PASSES 1,500 MEMBER AND 8,500,000 DEVICE MARK (15/07/2011 15:41:12)

The CC-Link Partners Association (CLPA) continues to increase its global strength. 2011 has now seen the 1,500th member join, while the worldwide installed base has now exceeded 8.5 million devices. These two events have further secured its position as one of the world's largest fieldbus organisations.

Ovivo’s Combined Inlet System brings it all together (15/07/2011 15:24:43)

Designed to suit any elevation and flow system, Ovivo's Combined Inlet System (CIS™) brings together the very best processes for the pre-treatment of raw sewage effluent.

Electrolube Adds to its Green Credentials (15/07/2011 15:15:18)

The established manufacturer of electro-chemicals, Electrolube, has added to its 'green credentials' by introducing two new products with improved environmental properties.

Eco-Solids international make encouraging start with VALORGAS programme’s food waste-to-energy tests (15/07/2011 14:57:53)

Eco-Solids International, who are partners in the EU-funded VALORGAS programme, report that initial tests on two-stage digestion for combined methane and hydrogen production are going well.

Olmec-UK Launches New Code Reading System (15/07/2011 14:40:11)

Vision systems integrator, Olmec-UK Ltd, has launched a versatile, extremely simple to use code reading system for standard and hi-speed character recognition and verification on labels. Originally developed to meet the stringent requirements of the healthcare industry, the self-contained Olmec VP2-CR offers fully validated character recognition, character verification and robust 2D data matrix handling and grading, and can be used for tasks ranging from simple verification through to GS1 and CIP13 conformance.

High-resolution positioning system for incremental motions in the nanometer range (15/07/2011 10:02:03)

With the new N-664 linear positioning stage, PI (Physik Instrumente) has succeeded in developing a further groundbreaking piezo positioning system of the reference class. A NEXACT® piezo linear drive replaces the usual stepper or DC servo motor in the N-664, thus making a position resolution of far less than a nanometer possible. Aligned to it is the new PIOne optical linear encoder with a resolution of 0.5 nm, which allows for repeatable incremental motions of 2 nm.

Don’t Jump to Conclusions over Drive Efficiency (15/07/2011 09:48:04)

Fitting variable speed drives to motors is often put forward as a way of saving energy, and this idea appears to have influenced the wording of part of the European Ecodesign Directive. However, as Phil George of Eaton's Electrical Sector explains, variable speed drives are not always the most energy efficient choice.

Molex showcases new SolarSpec products at EU PV SEC 2011 - SolarSpec Junction Box for smart functionality (15/07/2011 09:41:26)

At this year's EU PV SEC, Molex is introducing its new SolarSpec™ smart Junction Box making it easy for manufacturers of solar photovoltaic (PV) panels to provide their products with module-embedded safety and monitoring functions, as well as convenient, safe and dependable connection facilities.

FOSTER CORPORATION ANNOUNCES NEW APPOINTMENT (15/07/2011 09:34:23)

Foster Corporation, part of the PolyMedex Discovery Group, is pleased to announce the appointment of William Smith as Sales Manager for custom polymer compounds. In his new role, Mr. Smith will lead Foster's strategic initiatives to continue as a leading supplier of custom compounds for minimally invasive medical devices and to expand into other critical, non-invasive healthcare markets. He will manage the company's entire sales organization and product portfolio mix, while working closely with key global customers to develop new products and applications.

Benzene Achieves Record Sales – Ceresana Research Publishes New Market Study (15/07/2011 09:24:12)

Benzene, a colorless liquid, is the precursor for numerous chemical compounds. The global benzene market will see dynamic growth: According to the new report from the market research institute Ceresana Research, the global demand for benzene will rise to approximately 6 million tonnes by 2018. In addition, global revenues are anticipated to increase to US$52.6 billion by 2018. "Benzene revenues will substantially exceed the 2007 peak level as soon as in 2011," expects Oliver Kutsch, CEO of Ceresana.

Low-cost EPT2105 pressure sensor is aimed at demanding high volume applications (15/07/2011 09:18:32)

Variohm EuroSensor's EPT2105 pressure sensor has lowered the price barrier for demanding environment pressure measurement applications in the 0 to 20 bar range. The sensor features a piezoresistive measuring cell and integrated high output ratiometric circuitry in a lightweight and durable injection moulded ABS plastic housing - with straightforward installation guaranteed via its industry standard M18 port and a Packard Metri-Pack 150 series connector.

Europlacer North America Expands SMT Equipment Support Team - Scott Huffman Joins Europlacer North America as Field Service Engineer (14/07/2011 16:12:06)

Europlacer, a designer and manufacturer of comprehensive pick-and-place systems for the global electronics industry, recently added a new member to its customer support team &#8213; Field Service Engineer Scott Huffman.

Increased capacity at Barrett Steel’s C Roberts plant in Rotherham (14/07/2011 16:03:53)

Barrett Steel has increased capacity and reduced lead times at the company's C. Roberts facility in Rotherham by investing in a £500k upgrade to cutting operations with the installation of a Ficep Tipo A31 automatic CNC drilling and thermal cutting line for steel plate.

NOTIFIER RELEASES BIM FIRE ALARM MODELS - NOTIFIER First to Offer Fire Alarm Digital Content for Building Information Modeling (BIM) (14/07/2011 14:19:28)

NOTIFIER by Honeywell announces the release of digital content models of its most popular ONYX Series fire alarm control panels for Architects, Engineers and Consultants utilizing BIM to create digital models of a building's design and construction.

EcoVadis solution chosen by RENAULT to assess suppliers' CSR performance (14/07/2011 14:11:38)

EcoVadis of France has been selected by RENAULT to set up an innovative platform in order to assess the Corporate Social Responsibility (CSR) performance of the international car manufacturer's suppliers. In a recent report, the United Nations Environment Programme (UNEP) has recognised the use and validity of the tools offered by EcoVadis, in order to help companies integrate Sustainable Development criteria into their supply chain.

Quick-clamping shaft collars – Easy adjustment for rapid setup or frequent change-over (14/07/2011 13:29:59)

One of the simplest and consequently most overlooked components in the power transmission industry is the shaft collar. However, the importance of the shaft collar is demonstrated through the widespread use of these components. Shaft collars can be found in virtually any type of equipment. They are used by themselves for various applications, including mechanical stops, locating components and bearing faces, and are frequently accessories to other components to create assemblies for many types of power transmission equipment including motors and gearboxes.

THATCHAM CERTIFICATION FOR TECNA RHINO AND COBRA EVO SPOT WELDERS FROM WILKINSON STAR (14/07/2011 13:12:17)

Two Resistance Spot Welders, Tecna's Rhino (14,000Amp) and Cobra Evo (12,000 Amp) from Wilkinson Star Limited, the Worsley, Manchester based industrial equipment supplier and sole UK representative for TECNA Spa, the Italian resistance welding equipment manufacturer, have received Thatcham Quality Assurance, after being assessed and found to perform and comply with the TQA® Criteria for body shop resistance welding equipment.

MAPAL’s helix milling boosts productivity for large bores (14/07/2011 11:40:24)

With newly developed cutters and its novel helix milling technique, MAPAL is now able to increase material removal rates in the machining of large diameter bores by up to 40% compared with conventional circular milling cutters. Designed for roughing of bores 150 mm or more in diameter, MAPAL's new tangential cutters feature economical indexable inserts and provide optimised chip removal to extend tool life.

New Appointment As Exports Rise At Sussex Company (14/07/2011 11:33:03)

Mecmesin, a leading manufacturing company, based in Slinfold in West Sussex, has just appointed a new Export Sales Co-ordinator.

Mecmesin Launches New Production Floor Torque Tester (14/07/2011 11:12:00)

The new Vortex-xt has been designed for quality control managers who need a simple, accurate, yet rugged, torque testing system for the production floor or QC laboratory.

Rittal’s Advanced Air Management System eliminates escaping airflow (14/07/2011 11:01:26)

Rittal has a range of air management systems to enhance the cooling performance in AdvancedTCA and MicroTCA shelves. To ensure that any crucial cooling airflow is not wasted by escaping from any unused slots in the chassis, Rittal has developed a filler panel which acts as a barricade to prevent any valuable unused cooling air from escaping.

Sandvik Coromant’s new end mills enhance titanium finishing - Aerospace customers will benefit from light cutting 50° helix angle (14/07/2011 10:54:01)

Always seeking to improve machining efficiency for its customers, cutting tool and tooling systems specialist Sandvik Coromant has added a series of specialized end mills for finishing titanium to its impressive CoroMill® Plura range. Featuring a light cutting action facilitated by an innovative 50° helix angle, the end mills are optimized for titanium alloys used commonly in the aerospace industry, particularly finishing and semi-finishing in deep pockets with thin walls. The design allows cutting at high metal removal rates without inducing vibration.

Energy Companies Gather with GE to Discuss How to Optimize Health and Performance of Large Industrial Equipment (14/07/2011 10:48:42)

SmartSignal, now part of GE Intelligent Platforms, holds standing-room-only European conference to introduce expanded plans for software innovation

Banner EZ-LIGHT™ K50L Features Power-Optimized Electronics, Designed to Work with Wireless Sensor Network Devices (14/07/2011 10:36:35)

Banner Engineering introduces the EZ-LIGHT™ K50L with an independent push-button to the company's extensive line of lighting and indicators.

Piher's New Through-Shaft Steering Angle Rotary Sensor Offers Small Package and Cost-Effective Alternative to Encoder Technology (14/07/2011 10:16:09)

Piher International Corporation has announced the immediate availability of a new shaft angle rotary sensor - the PST-360 Through-Hole Position Sensor. The PST-360 combines a through-shaft design with 360º absolute position feedback in an extremely thin package.

igus to showcase rugged energy chains, chainflex cables and bearings at Offshore Europe 2011 (14/07/2011 10:05:26)

At this year's Offshore Europe exhibition in Aberdeen, igus UK will be launching the latest additions to its industry-leading e-chain® cable carriers and chainflex® continuous-flex cables developed specifically for mechanically and environmentally challenging offshore applications, as well its maintenance free range of plain, spherical and linear bearings.

ISA Announces Schneider Electric as an ISA Automation Week Partner (14/07/2011 09:56:52)

The International Society of Automation (ISA) announced today that Schneider Electric is an ISA Automation Week 2011 Partner. Schneider Electric is a global specialist in energy management and sustainable manufacturing, helping businesses work better, faster, more efficiently and profitably.

New low energy solenoid valves from Gems Sensors give fast response and high flow (14/07/2011 09:49:57)

Gems Sensors & Controls, a global market leader in fluid sensing and control solutions, has introduced the energy efficient E Series family of pneumatic solenoid valves, specifically engineered to give fast response and high flow rates in a wide range of air and dry gas applications.

Flatness and Leveling Measuring System with Automatic Rotating Laser (14/07/2011 09:44:32)

LEVALIGN® EXPERT provides an accurate and easy to use method for the measurement of flatness and straightness of machine bases and foundations, split machine casings, as well as flatness and parallelism of circular, rectangular and odd-shaped flanges. The system consists of a self-leveling motorized rotating laser and a sensor which interface wirelessly with a dedicated geometric measurement computer.

Smart Imaging Simplifies Inspection, Traceability And Code Reading (13/07/2011 16:51:32)

STEMMER IMAGING, Europe's largest independent supplier of vision technology and services to OEMs, system Integrators and reseller markets, will be showing the latest multipoint and single point intelligent inspection systems from Teledyne DALSA and the latest 3D smart camera from LMI Technologies. This impressive range can be used for traditional inspection applications as well code reading, verification and traceability

TWO NEW AND UPDATED – ‘ESSENTIAL READING’ - TECHNICAL GUIDES FROM BEAMA (13/07/2011 16:21:10)

BEAMA's Low Voltage Switchboard Technical Committee has published two new guides - the much anticipated new Guide to Forms of Separation and the updated Guide to Verification relating to BS EN 61439-2.

Sherborne Sensors launches Wireless Tilt System - All weather radio telemetry system offers high accuracy, remote angle measurement data. (13/07/2011 14:57:21)

Sherborne Sensors, a global leader in the design and manufacture of sensors for military, aerospace and industrial applications, has announced its debut wireless product, the Wireless Tilt System (WTS). Designed to provide surveyors, geotechnical specialists and structural engineers with a complete measurement solution, the WTS is a flexible all weather radio telemetry system delivering highly accurate remote angle measurement data.

TSMC Qualifies Magma's QCP Extractor for 28-nm Designs (13/07/2011 14:31:02)

Magma Design Automation Inc., a provider of chip design solutions, today announced TSMC has included the QCP™ extractor in TSMC's quarterly EDA qualification report for 28-nanometer (nm) integrated circuits (ICs). This qualification gives designers additional confidence in using QCP to address the increasing complexity of ICs implemented in TSMC's 28-nm processes.

Premier Defense Contractor Optimizes Assembly, Integration and Test Processes with Dassault Systèmes Simulation Solutions (13/07/2011 11:32:38)

Dassault Systèmes, a world leader in 3D and Product Lifecycle Management (PLM) solutions, today announced that Dassault Systèmes' DELMIA solutions are being used for product and process simulations at Lockheed Martin Space Systems Company. The DELMIA solutions are also a major software component of the new Lockheed Martin Collaborative Human Immersive Lab (CHIL) opened at the end of 2010.

TUBE BENDING TOOLING CALCULATOR FOR THE IPHONE (13/07/2011 11:28:51)

A unique calculator for evaluating bending machine tooling is now available for the Apple iPhone. Developed by tube bending machinery specialist Unison, the calculator enables users to quickly and easily determine the tooling needed for performing a particular bending task on any type or make of tube bender.

Weld seam inspection on pipes (13/07/2011 10:31:38)

Middle East Tube Company (Metco) is Israel's largest manufacturer of steel pipe. As these pipes are used for transporting sewage, water, oil or gas, the weld seam produced during the pipe manufacturing process must be absolutely leak-tight.

GRACEFULLY AESTHETIC ARCH-SHAPED PULL HANDLES FROM ELESA (13/07/2011 09:13:00)

Smooth contoured and graceful pull handles like the GN665 from Elesa have the strength for use on machine tools and large instrumentation while being especially attractive in reception areas on furniture or doors, and can be colour coded to suit custom colour schemes or corporate design styles.

Forum Energy Technologies Adds Torque Specialist, AMC Global Group (13/07/2011 09:03:46)

Forum Energy Technologies (FET) announced today the acquisition of AMC Global Group Limited (AMC). Based in Findon, Aberdeen, UK, AMC designs and manufactures torque equipment for tubular connections used in the worldwide oil and gas industry.

Ceramic motor stage range now has Z-wedge vertical micropositioning (12/07/2011 16:49:37)

Nanomotion, the leading manufacturer of piezo-electric motors for precision motion control applications, has added a new Z-wedge vertical stage to its FB range of compact nanometre level positioning mechanics. Available in the UK through Heason Technology, the new vertical stages complement a modular and compact range of linear, rotary and goniometric stages that together provide multi-axis and nanometre level translation in all six degrees of freedom.

FasTest Expands FasCal line of Sleeve-Actuated Calibration Connection Devices to Suit Broad Range of Thread Profiles (12/07/2011 16:43:48)

FasTest announces an enhanced 60G-CF04 connector, designed to simply attach to a 1/4-inch Swagelok® fitting.

PA4000 Photoacoustic Gas Monitor Ensures Accurate Measurement Without Vapor Interference (12/07/2011 16:35:58)

The versatile PA4000 Photoacoustic Infrared Gas Monitor from General Monitors provides precise, high-performance gas monitoring while eliminating interference from water vapors, offering a reliable, low maintenance, cost-saving solution in situations where contaminants or interference preclude use of other measurement techniques.

ECONOMICAL WATER JET CUTTING OF SOFT MATERIALS (12/07/2011 16:30:23)

For pure water jet cutting applications, KMT has introduced a new, competitively priced pump and pressurised delivery system. It is aimed at OEMs (original equipment manufacturers) whose customers need relatively low flow rate and pressure for processing soft materials like paper, foam, plastic, rubber, gaskets, textiles and food.

PRESSWORKING PRODUCTIVITY DOUBLED - High-speed press with twin servo drives can accommodate two tools, side-by-side or in-line (12/07/2011 16:15:41)

The generous working area and power of a new Bruderer BSTA 510-125 high-speed press, installed in April 2011 at the Cirencester factory of Batten & Allen, is proving particularly versatile for the precision stamping specialist.

Rice Lake unveils world’s fastest junction-box technology (12/07/2011 16:10:33)

Rice Lake Weighing Systems announces the long-anticipated release iQUBE2™, the fastest tool on the market for managing multiple-cell scale systems. This junction box's ability to update up to 500 times per second is taking accuracy, precision, and profits to levels never before seen in smart junction-box technology.

Rice Lake positions checkweighers for extreme conditions (12/07/2011 16:05:36)

Heavy wash-down environments and HACCP requirements call for the CW-90X. The over/under CW-90X scale features hermetically sealed load cells, 304 stainless steel materials and has an IP69K rating to survive daily sanitary wash-down treatments. The CW-90X also features the toughest keypad available in the industry. The unique piezo keypad has no moving parts and is made to withstand sharp knife-point contacts and is resistant to all types of contaminates and liquids.

One size fits all with Rice Lake’s new answer to versatility—the Versa-portion bench scale (12/07/2011 15:59:52)

Brand new this fall is Rice Lake's Versa-portion RLP-S compact bench scale. Just as the name implies, versatility is perhaps the biggest selling point of the sturdy new model, with its stainless steel construction, IP68 rating, and a broad range of useful features.

920i® FlexWeigh Systems standardize process control (12/07/2011 15:55:00)

Users bypass complex setup and programming with off-the-shelf indicator models designed for specific weighing tasks

Rice Lake Weighing Systems opens European service center (12/07/2011 15:48:48)

US-based scale manufacturer strengthens dedication to customers abroad - Having only recently cemented the details of a newly formed partnership within India, Rice Lake Weighing Systems (RLWS) announces the opening of a fully staffed European distribution center. Rice Lake Weighing Systems Europe B.V. is now open in Arnhem, Netherlands.

New true absolute angle encoder is suitable for low temperature environments (12/07/2011 15:41:22)

Renishaw's new RESOLUTE ETR™ (Extended Temperature Range) encoder brings all the benefits of the revolutionary RESOLUTE absolute, fine pitch angle encoder to harsh, low-temperature applications. With operation guaranteed down to -40 °C (-40 °F) in non-condensing environments, RESOLUTE ETR is highly suited for use in demanding applications such as telescopes, scientific research, military and aerospace.

NEW TURNING AND MACHINING CENTRES TO BE LAUNCHED BY HURCO (12/07/2011 15:33:15)

A total of eight machine tools, of which three will be on show for the first time in Europe, will be cutting metal on the Hurco stand at EMO 2011. Demonstrating the manufacturer's ever-broadening product range, the exhibits will include three different configurations of 5-axis machining centre as well as larger and multi-axis lathes.

ONET TECHNOLOGIES takes over BRADTEC DECON of the UK (12/07/2011 15:03:49)

ONET TECHNOLOGIES has strengthened its presence in the UK further to the takeover of BRADTEC DECON TECHNOLOGIES LTD, a company specialising in decontamination procedures. ONET is France's leader in decontamination and wanted to boost its operations in Britain, where the French-based company already has a subsidiary.

Platinum-Cured Silicone Tubing from NewAge® Industries Offers Purity for Fluid Transfer - Well Suited for Medical, Pharmaceutical, & Food Applications (12/07/2011 14:55:14)

NewAge Industries manufactures silicone tubing that's platinum cured for the highest degree of purity. Called Silcon® Med-X, it's one of the company's medical grades of silicone tubing and reinforced hose. Silcon Med-X is particularly suited for applications in the medical, biomedical, pharmaceutical, laboratory, surgical, food, beverage, and health and beauty industries.

SOUTHCO HELPS REDUCE THEFT OF OFF-HIGHWAY VEHICLES & IMPROVE OPERATOR SAFETY (12/07/2011 14:40:56)

Despite being the second largest country with regards to sales of off-highway and construction vehicles in the EU, the UK off-highway industry, similar to the automotive sector, is experiencing a shrinking market as a result of today's tough global economic conditions.

Catalog Data Solutions Parametric Catalog and CAD Downloads Implemented by Brother International Corporation
 (12/07/2011 14:27:42)

Catalog Data Solutions (CDS), a leading provider of online product selection tools for industrial suppliers and distributors, today announced that Brother International Corporation has implemented its CDS Catalog product for parametric product search and its CDS ModelServer product for CAD Downloads. The SaaS CDS Catalog frontends the CDS CAD ModelServer CAD download solution on the Brother website.

VICTREX LAUNCHES DURABLE LIGHTWEIGHT VICTREX PIPES™ BASED ON ITS VICTREX® PEEK™ HIGH PERFORMANCE POLYMER (12/07/2011 14:20:38)

In response to growing market demand for superior performing pipes in harsh and demanding environments, Victrex Polymer Solutions, world leader in high performance polyaryletherketones, has launched its VICTREX Pipes™ product family.

Climbing Mountains for Charity (12/07/2011 14:00:20)

At 6:15am we all stood at the top of Wales. We all felt amazing. The two hours climb had been worth it as the views were spectacular. We were above the clouds and had felt the sun rise on our backs as we climbed. Unbeknown to us, snow had fallen on Snowdon the night before and it was cold. Thankfully, the snow had disappeared, although the ground untouched by the rising sun was coated in a thick frost.

Expansion at Vision Systems Integrator (12/07/2011 13:51:23)

Vision systems integrator, Olmec-UK Ltd, has announced the expansion of its mechanical design and on-site installation departments in response to significantly increased levels of business. Petra Millberg has joined the design group, while Andrew Pounder has strengthened the company's on-site systems integration team.

New UI Platform enables quickest, easiest deployment of graphic-rich, colour touch interfaces (12/07/2011 12:57:56)

andersDX's new 'DX1' series of embedded displays provides a 'drop-in' solution for integrating small, touch TFTs with outstanding optical performance, multiple interfacing options and support for graphic primitives

Spelsberg enclosure solutions offer experience to the UK photovoltaics market… (12/07/2011 12:49:39)

As energy costs continue to increase, and environmental concerns grow throughout the general population, research and investment in renewable energy technologies is at an all time high. Probably one of the most efficient and popular of the new energies is solar power; while this technology has been used for many years in a number of European countries, in the UK it is a young industry. Despite recent changes to the government feed-in tariff, small and large scale investment is expected to continue to increase in the UK. UK installers, therefore, are clamouring to find suppliers with industry experience who can reliably supply the UK market.

Mayr®: Extremely compact multi circuit brake (12/07/2011 12:32:57)

Double safety utilising redundancy also means double the braking torque. On designs with two independent brake circuits, this puts enormous mechanical strains on systems and components. Mayr® Power Transmissions have solved this problem by developing a new multi circuit brake, the ROBA®-quatrostop.

“Silent Security” - Mayr Launches Range of ‘Silent’ Brake Motors (12/07/2011 12:29:13)

Mayr Transmissions Ltd. have for many years been regarded as global market leaders in the field of low noise safety brakes and through a joint venture with Gamak Motors UK, Mayr are now able to supply complete brake-motor assemblies in sizes ranging from IEC 71 through to IEC 132 frame.

Modular junction boxes help bring communally operated solar power plant to Frankfurt fairground roof (12/07/2011 12:23:06)

The roof of Hall 10 of the Frankfurt Messe fairground is now home to a solar power plant – an innovative, communally operated project that will meet the electricity needs of over 150 homes. Key to the success of the installation are Hensel ENYSUN type-tested distribution boards and modular, pre-wired photovoltaic junction boxes – products distributed exclusively in the UK by Telford-based electrical specialist CEE Norm.

New Website For Chatillon® Force Measurement Products (12/07/2011 11:04:30)

The Chatillon® brand moves into its 176th year with exciting new products and a completely revised website, www.chatillon.com. Part of the AMETEK Test & Calibration Instruments, which also includes Lloyd Instruments' materials testing machines, Davenport polymer test equipment, hardness testers from Newage Hardness Testing Instruments and Jofra calibration instruments, Chatillon force measurement instruments and systems are used for production, quality and R&D in a host of applications and markets.

EEF and UKTI sign partnership agreement on export promotion (12/07/2011 10:57:04)

EEF, the manufacturers' organisation and UK Trade & Investment (UKTI) have signed a memorandum of understanding to collaborate on the promotion of export services to manufacturing and engineering companies across the UK.

Shielded windows support EMI compliance in growing number of products with high graphical content (12/07/2011 09:47:53)

Chomerics Europe - a division of Parker Hannifin is able to offer a complete range of shielded and non-shielded glass and plastic windows for use in a wide range of product in both portable and fixed location equipment. Typical applications can be found in markets that include military, medical, public information display and test and measurement equipment.

Brad Micro-Change M12 Circular Hybrid Technology (CHT) Connectors from Molex - High signal integrity and excellent performance with rugged IP67-sealing (12/07/2011 09:38:19)

Molex Incorporated has introduced the innovative Brad® Micro-Change® M12 Circular Hybrid Technology (CHT) connector that combines Cat 5e data speed and power supply for high signal integrity and excellent performance. By combining both the power and data lines in one M12 connector, the Micro-Change CHT reduces footprint in addition to both installation and cabling costs in Process and Automation Control and Industrial applications as well as in HVAC systems, Telecoms Infrastructure, Vision Systems and Surveillance Cameras, Mil/Aero and Non-Automotive Transportation (NAT).

PPT VISION Announces UV and Remote-Head Cameras and Updated IMPACT™ Software (12/07/2011 09:24:05)

PPT VISION, here, today announced the addition of two high-performance JAI cameras to its M-Series embedded machine vision system line, including an ultra-violet (UV) camera for inspections that benefit from this shorter wavelength of light, as well as a remote-head "industrial endoscopy" model for special applications. Additionally, the release of the IMPACT™ 10.2 software supports the growing M-Series vision system family with streamlined functionality and expanded image management capabilities.

Industrial Video and Control to Monitor Savannah River Nuclear Waste Clean-up Operations (12/07/2011 09:16:39)

Radiation-tolerant IVC video cameras will monitor operations in the Salt Waste Processing Facility, which is cleaning up liquid waste from the DOE's Savannah River site.

Cadac Organice has signed a framework contract with A. P. Moller - Maersk - Maersk Oil, a fully-owned subsidiary of A.P. Moller – Maersk, will implement the Cadac Organice Product Suite to manage and control its engineering documents (12/07/2011 09:06:21)

Cadac Organice, a Microsoft Gold ISV Partner and developer of Cadac Organice, a SharePoint based solution for Engineering Document Management and Document Control, announced today that it has signed a framework contract with AP Møller Maersk. The Cadac Organice Product Suite will be implemented within Maersk Oil with a focus on optimizing project and document control and transmittal processes.

Boker's Sample Pack and Total Service Brochure Provide Complete Stamping, Washer and Service Offerings (11/07/2011 16:52:28)

Boker's, Inc. announces their complimentary washer sample pack, featuring the company's Total Service Brochure, is now available.

New ES4000 Total Carpet Care System from Advance Provides Complete Flexibility for Carpet Maintenance (11/07/2011 16:08:03)

The cost-efficient ES4000 delivers increased productivity and simple, one-touch operation in one valuable machine to satisfy diverse carpet care applications.

Toumaz Limited Announces Joint Venture For Newly Approved Sensium™ “Digital Plaster” - Toumaz Limited teams up with Dr. Patrick Soon-Shiong to commercialise the Sensium™ Digital Plaster, a disposable wireless body monitoring device (11/07/2011 15:58:15)

Toumaz Limited, a pioneer in low cost, ultra-low power wireless communications and broadcast technology, has established a new joint venture with Dr. Patrick Soon-Shiong's company California Capital Equity LLC ('CCE'), to expand the commercialisation and distribution of the Sensium™ Digital Plaster. The joint venture, which is named "Toumaz US LLC", will be headquartered in San Diego, California, and will sell and distribute the Sensium™ Digital Plaster in North America and Worldwide.

XF510m: a single marking machine for all types of materials (11/07/2011 13:54:54)

Technifor can offer an electromagnetic micropercussion marking solution for use on all materials. The micro-impacts produced on the material surface using a carbide tipped stylus create a lasting mark, without creating stress or chippings. This new machine is the result of the process to optimise the Technifor range, adding a powerful electromagnet combined with an optimal guide system to produce marking of remarkable precision and quality.

Amphenol stocking extended to make Farnell a one-stop location for designers with interconnect applications (11/07/2011 12:43:02)

Over 35,000 products stocked including market-leading industrial composite and Terrapin ranges - Farnell has added over 6,500 Amphenol military, aerospace, industrial and commercial connector products to the range it currently offers from the world's second largest manufacturer of interconnect solutions and cables. The total Amphenol product offering available from Farnell now extends to over 35,000 parts enabling designers to address a wide range of applications in end markets that include automotive, industrial, medical, mil-aero, computing, heavy equipment and mobile networks.

SKF Idler Sound Monitor Kit detects conveyor idler problems reliably, quickly and safely (11/07/2011 11:53:24)

The leading knowledge engineering company, SKF, has announced the availability of its new SKF Idler Sound Monitor Kit. This is an easy to use, rugged and handheld monitoring device for early detection of faults in conveyor belt idlers. Conveyor idlers support the length of a conveyor belt and are a common cause of belt damage and production downtime. The SKF Idler Sound Monitor Kit will enable early detection of faulty idlers and prevent costly belt repairs, lost production and risk to workers.

“EVERYTHING BUT THE ENCLOSURE” NOW ALSO “EVERYTHING IN STAINLESS STEEL (11/07/2011 11:47:41)

For many years EMKA have operated on the basis of supplying "everything but the enclosure" and increasingly they are also finding that "everything in stainless steel" is the demand for cabinet hardware as installations find more aggressive environments and more challenging regulations. Industries such as food processing and pharmaceuticals have become much more sophisticated and far reaching in their requirements that companies such as EMKA now provide a wealth of stainless steel components from hinges and handles to specialist locking systems. Materials vary from AISI 303 to AISI 316 and include fabricated as well as fully machined items with sealing up to IP66.

FIRE-LITE ALARMS TRAININGS OFFER CEUs - Advanced Fire Alarm Programming Course Added at Customers' Request (11/07/2011 11:10:39)

Fire-Lite Alarms by Honeywell, is offering an unprecendented number of fire alarm trainings throughout the U.S. this year, which qualify attendees for CEUs (Continuing Education Credits). The 2011 training schedule is comprised of three courses covering hands-on installation and programming utilizing the latest equipment from Fire-Lite Alarms and Honeywell Power Products. While all course content has been updated with new products and tools, the two-day Fire-Lite Systems class remains free-of-charge.

MLE Creative participates in MediLinkUK’s medical design debate - What is more important in the design of medical devices: appearance or functionality? (11/07/2011 11:03:43)

MLE Creative Electronics, innovators in medical electronics design, in conjunction with MediLinkWM, the voice of the UK life science industry, today invites medical professionals to join the medical device design debate: What is more important in the design of medical devices: appearance or functionality?

Fluke tools chosen for WorldSkills London 2011 (11/07/2011 10:57:04)

Fluke test tools have been chosen by WorldSkills London 2011 to be used by the Competitors within the 'Manufacturing and Engineering Technology' category at the Competition (www.worldskillslondon2011.com), which will be held over four days at ExCeL London from 5-8 October 2011.

Non Contact IR Wafer thickness measurement (11/07/2011 10:52:47)

In-process measurement of the thickness of Silicon wafer substrates and blind via depth is a regular operation in semiconductor manufacturing. Armstrong Optical Ltd of Northampton have added high precision, non contact sensor that allows thickness measurement of Silicon (and other semiconductor substrates) wafers (doped or undoped).

KEMET announces first-to-market high temperature ceramic C0G dielectric capacitors in 0402 case size (11/07/2011 10:37:47)

KEMET has announced the release of the industry's first Multilayer Ceramic Capacitor (MLCC) in an EIA 0402 case size capable of reliable performance in environments up to 200°C.

Livingston Announces the Appointment of New International Sales Director - Test sector veteran chosen to head up commercial operations (11/07/2011 10:33:49)

Europe's leading test equipment sourcing firm Livingston has recruited Mike McHale into its executive management line up. Highly experienced, McHale has notched up 25 years working within the high tech and test and measurement industry - in direct sales, channel sales, business development and senior sales management roles. Taking up the post of International Sales Director, he will look to strengthen relationships with Livingston's existing client base as well as identifying new sales opportunities around the world.

ISA gets “social,” with its new ISA Interchange blog (11/07/2011 10:27:12)

The International Society of Automation (ISA) announces the launch of its social media site, ISA Interchange.

Simultaneous USB data acquisition with highest sampling rates - 10 MHz USB Data Acquisition Module with Two Isolated Analog Inputs.  (11/07/2011 10:22:24)

Data Translation announces the release of a cutting-edge data acquisition module that sets new standards in 16-bit high-speed data acquisition via USB 2.0. With up to 10 MHz signal sampling and direct streaming to the PC, the new DT9862 can provide twice the USB throughput rates achievable with comparable solutions currently available on the market. All I/O channels are galvanically isolated to ensure ultra-high measurement accuracy and signal integrity. In addition, the new module also features flexible clock and trigger functions (e.g. pre-, post- and about-trigger modes).

NEW DC FILTER FMER SOL (11/07/2011 10:16:34)

SCHURTER presents its new standard DC filter series FMER SOL suited for use on the DC side of the inverter in photovoltaic systems. The filters are cURus approved up to 1000 VDC and an ambient temperature up to 75°C.

NEW SPRAY VALVE FROM INTERTRONICS FOR LOW VISCOSITY MATERIALS (11/07/2011 10:11:11)

The U.K.'s market leading adhesives specialists at Intertronics have a new solution for manufacturers seeking to spray coat low viscosity materials at close tolerances, such as for conformal coatings or inks in low value production and prototyping applications.

Igus Video of the Week – igus delivery in 24 hours or today - Driven by customer needs, open 8am to 8pm Mon-Fri and 8am to 12pm Sat (11/07/2011 10:06:02)

igus is driven by customer needs; one example is the 8am to 8pm Monday to Friday and 8am to 12pm on Saturday opening hours. For igus, every order placed is vitally important – that's why the time in which customers receive their goods is one of the main targets of igus customer service. The plastics specialist aims for delivery within 24 hours from the 80,000 parts in stock.

Atlas Copco introduces 0% finance initiative and energy efficient technology at The Energy Event 2011 (11/07/2011 09:59:41)

Stand 2950, The Energy Event 2011, NEC Birmingham, 13th-14th September. At this year's Energy Event at the NEC in Birmingham, Atlas Copco Compressors will be exhibiting its energy efficient air compressors and blowers and highlighting the performance and energy savings available when using fully integrated VSD technology. The company will also introduce its recently-launched 0% finance initiative designed to encourage investment in the latest energy-efficient compressed air solutions.

HOW NEW TECHNOLOGY IS DRIVING THE MACHINERY DIRECTIVE - LAIDLER AND TÜV SÜD TO DELIVER FREE MACHINERY DIRECTIVE UPDATE SEMINAR AT PPMA 2011 (11/07/2011 09:53:49)

PPMA Show 2011, 27-29th September 2011, NEC Birmingham, Stand D56. Visitors to the PPMA Show 2011 will have the opportunity to attend a free legislation update from machinery safety specialists, Laidler Associates, a division of TÜV SÜD Product Service, which will highlight the impact the Machinery Directive has already had and will continue to have on machine manufacturers and end-users.

RONIS offers interlock systems for faultless security (11/07/2011 09:45:42)

RONIS of France has developed a full range of interlock systems designed specifically to ensure the safety of users and equipment during work on medium- and high-voltage machines and electrical installations. This extensive range is organized into four product families and offers a large number of locks that can be adapted to any hazardous component by requiring manipulation in a specific order. The systems developed by RONIS can be tailored to each company's specific needs.

Thompsons Selects Edbro Tipping Gear for Exeter City Councils Latest Lightweight Recycling Collection Vehicle (11/07/2011 09:40:57)

Thompson's bodybuilders has been commissioned to build a tough but efficient new recycling vehicle for Exeter City Council. The vehicle's role is the collection of glass and paper from recycling points across the city and it is in service 6 days a week, meaning the tipping gear needed to be extremely reliable whilst also maximising payload through lightness. Having worked with Edbro on numerous projects before, and being aware of its reputation for quality, Thompsons chose to use its UB range of tipping cylinders.

AVL Powertrain UK Incorporates NTC’s Software Team (11/07/2011 09:34:32)

Following AVL's acquisition of NTC Powertrain, the NTC software team has now become part of AVL Powertrain UK. The move signals a strengthening of AVL's engineering presence in the West Midlands.

NEW PROFESSIONAL MIG/MAG SYNERGIC WELDING MACHINE FROM GYS (11/07/2011 09:30:04)

The TRIMIG 385-4S is the latest easy to use 3-phase 400V Synergic MIG/MAG welder from GYS Ltd, the French welding equipment and battery charger manufacturer, in which the microprocessor controller will automatically set the optimum wire speed and optimum welding parameters, thereby avoiding any complex machine set up.

853 KV Engine Connector Class (11/07/2011 09:24:36)

KV class connectors are the perfect answer to the high-vibration and high-temperature (260°C) requirements encountered in aircraft engines and other harsh operating environments. In addition, the trend in aviation to minimise weight and to optimise the ergonomics of wiring harnesses make KV class connectors the perfect solution with their integrated backshell. It is because of these special features that the KV class is the solution adopted for new engine developments.

Farnell receives Panasonic Distributor of the Year award for second year running (08/07/2011 16:06:41)

Strong support and increased sales in an unpredictable market help Farnell secure important award - Farnell has been awarded the Panasonic Distributor of the Year Award for the second year in succession. The award, presented to Mike Buffham, Director of Product. Asset & Supplier Management, Farnell Europe, by Ken Steel, Panasonic's European Sales Director, recognised Farnell's success in growing customer numbers in targeted focus countries, and increasing sales of Panasonic's component and battery ranges across Europe.

New long travel vertical translation stage has 450 kg load capability and positioning resolution of under 100 nanometres (08/07/2011 15:53:33)

Vertical stage can be used individually or combined for classic kinematic 3-point load support - Aerotech's new VTS300 vertical translation stages provide long travel precision positioning in a compact upright design for individual Z-axis payloads up to 450 kg, or may be arranged as multiple synchronised units that support heavy loads with kinematic 3-point mounting with the added potential for angled tip/tilt load manipulation.

New Micro USB connector range offers multiple design options. (08/07/2011 15:48:39)

Leading connector manufacturer Global Connector Technology offers a new range of µUSB connectors, now defined as the standard interface port for Smartphone in Europe.

NEW INDUSTRIAL VACUUM CLEANER FROM FLEXTRACTION (08/07/2011 15:41:26)

The new Delfin Mistral 202 DS ECO compact, mobile, high filtration dry industrial vacuum vacuum cleaner from Flextraction Ltd, supplier and manufacturer of Local Exhaust Ventilation (LEV) products and 'preferred supplier' in the UK and Ireland for Italian industrial vacuum equipment manufacturer, Delfin s.r.l features a specially designed side channel blower 1.8 KW / 2.4 HP motor enclosed in a protective steel casing.

CYBERHAWK COMPLETES WORLD’S FIRST LIVE GAS FLARE INSPECTION (08/07/2011 15:35:03)

Leading remote inspection service company Cyberhawk Innovations has completed the world's first aerial inspection of a live gas flare stack at a well-known Scottish oil and gas refinery using an Unmanned Aerial Vehicle (UAV).

KINGFISHER INDUSTRIAL APPRENTICE WINS NEW COLLEGE ENGINEERING APPRENTICESHIP ACHIEVER OF THE YEAR AWARD (08/07/2011 15:28:03)

Kingfisher Industrial, a UK leader in wear protection technology, is celebrating the achievement of its employee, Richard Onions, in winning the Engineering Apprenticeship Achiever of the year award from the NEW (North East Worcestershire) group of colleges. With campuses at Bromsgrove and Redditch, NEW College has been recognised as an outstanding "Beacon" institution, and is notable for its successful apprenticeship school, which has been rated by Ofsted as Grade 1 (outstanding).

E-Tech grinding machines deliver unique combination of speed and precision for Dawson Shanahan (08/07/2011 15:24:34)

A dedicated manufacturing cell, comprising four automated high speed grinding machines, is playing a crucial role in helping Dawson Shanahan, the specialist cold forming and precision engineering company, improve the accuracy of finished parts and levels of productivity for components supplied to customers in the medical, automotive and electronics industries. Developed in conjunction with Earlsdon Technology (E-Tech), the grinding machines use specialised tooling to achieve surface finishes with tolerances that the company believes are more accurate than anything previously on high speed systems of this type.

Miniature Accelerometer for Extended Temperature Ranges (08/07/2011 15:18:14)

Measurement Specialties, Inc. has just released its miniature piezoelectric accelerometer for high temperature vibration and shock measurements. Operating in shear mode and free of internal performance-limiting adhesives, the Model 7502A sets the standard for stable thermal performance from -73°C to +260°C. Featuring a nominal charge output of 1.8pC/g, this device can directly interface with many existing charge amplifiers or it can be conveniently packaged with Measurements Specialties' Model 130 in-line charge converter or its Model 161 signal conditioner.

SolarSpec Panel-Mount DC Connectors and Terminals from Molex (08/07/2011 15:12:47)

IP67-sealed with internal locking mechanism and touch-proof design for superior safety - Molex Incorporated is further expanding its range of SolarSpec™ products with the development of pin (male) and socket (female) panel-mount DC connectors. The IP67-sealed, SolarSpec panel-mount DC connectors, with internal locking and touch-proof design for superior safety, feature an innovation nut mechanism for simple assembly to the panel and provide a durable connection for cable attachment to solar inverters. Early samples of the new SolarSpec panel-mount DC Connectors will be unveiled on the Molex stand (Booth B7.A14) during EU PV SEC, 5 – 8th September, Hamburg, Germany, with full production quantities expected by the end of the year.

Brevini DNV Type Approved Gearboxes for Marine and Offshore Applications (06/07/2011 15:13:55)

In the Marine and Offshore industry equipment failure can be catastrophic, in terms of cost and, more importantly, safety. This is why there are a number of certifications that apply to the industries which may be far stricter than for similar equipment that is used on land. Brevini has been supplying power transmission products into the Offshore and Marine sector for many years and is able to meet all the necessary requirements.

SHERBORNE SENSORS CONTINUES 100 PERCENT SUPPLIER RATING WITH LOCKHEED MARTIN (06/07/2011 15:06:53)

Confirms position as prefered supplier of accelerometers based on key performance indicators including quality of performance and service delivery - Sherborne Sensors, a global leader in the design and manufacture of sensors for military, aerospace and industrial applications, today announced its achievement of a 100 percent supplier rating with global security and technology systems provider, Lockheed Martin Missiles and Fire Control.

BURKERT GLOBE VALVES WITH INTEGRATED POSITIONERS PROVIDE IDEAL PACKAGE FOR CONTROL OF WATER FEATURES (06/07/2011 14:36:27)

Burkert globe valves equipped with Top Control positioners are providing precise control of water height on a prestigious new water feature currently being commissioned in the centre of Copenhagen. Supplied by a Burkert premier partner, Fine Controls, the valves control 40 individual vertical water jets, each valve receiving a position signal from a central PLC to control the height of the water jets in time to music.

SKF extends range of E2 ultra low friction bearings with double row angular contact ball bearings (06/07/2011 12:26:54)

SKF, the knowledge engineering company, has extended its range of E2 energy efficient bearings to include double row angular contact ball bearings (DRACBB). The innovative SKF E2 DRACBB range of bearings has been specifically engineered and manufactured to reduce frictional moment by at least 30% compared with standard bearings.

FDB INTRODUCE IP67 QUARTER-TURN LOCK WITH SW13 INSERT (06/07/2011 10:19:40)

FDB's recent introduction of the IP67 ref 7-081 quarter-turn lock is good news for cabinet suppliers to the food processing and clean room industry sectors. By virtue of its specialist SW13 insert and key arrangement the 7-081 minimises traps for dirt and biological material.

Multi-function pliers can crimp almost anything (06/07/2011 10:13:07)

Instead of carrying around four different crimping tools, the Haupa multi-function pliers from CEE Norm provide a single tool with a patented rapid change system that allows dies to be quickly changed without the need for any tools. The ability to replace a multitude of tools with the single Haupa tool gives enormous space and weight savings in any tool bag.

Cortus APS3 Processor at the Heart of PointChips Touch Screen Controller Chip - The Cortus APS3 processor is being used by PointChips in their latest advanced touch screen controller chips. (06/07/2011 09:32:49)

PointChips, a South Korean company, has included the Cortus APS3 32 bit processor in their touch screen controller chip. The APS3 provides the processing power to translate the signals received from the sensors on a touch sensitive surface into information that can be used by a smart phone or tablet. The APS3 processor, running custom software written by experts at PointChips, enhances the user experience of smart phone and tablet users with sophisticated features such as advanced gesture recognition and enhanced precision to ensure easy and reliable operation.

Chemical Water Treatment Industry Receives Energy Saving Trust Recommended Certification (06/07/2011 09:23:22)

The domestic heating chemical water treatment industry has achieved a real boost to its energy efficiency credentials with the announcement that the Energy Saving Trust is to endorse chemical inhibitors from Autumn 2011.

Making the Connection: The Plug-in Vehicle Infrastructure Strategy - “Joined up approach vital to gain consumer confidence and private investment in electric vehicles,” says BEAMA CEO Dr Howard Porter (06/07/2011 09:13:47)

While the Office of Low Emission Vehicles (OLEV) continues to oversee the completion of the Plugged-in-Places project, and promises to facilitate the plug-in vehicle market, the emphasis now grows on private investment to lead the way in the development of a mass market for plug-in vehicles.

Knorr-Bremse Group Broadens Use of Altair HyperWorks to Enhance Development Processes (06/07/2011 09:09:13)

Altair's HyperWorks suite offers German-based leading manufacturer of braking systems flexible and cost efficient access to CAE tools - Altair Engineering, Inc., a leading global provider of simulation technology and engineering services that empower client innovation and decision-making, announced today that Knorr-Bremse, a leading German manufacturer of braking systems for rail and commercial vehicles, has widened its use of Altair's HyperWorks suite of computer-aided engineering (CAE) tools. As a long-term customer, the company has recognized the benefits of HyperWorks and recently acquired additional HyperWorks license units to broaden its software use from HyperMesh and HyperView to also include RADIOSS, OptiStruct, and other tools.

Dassault Systèmes Introduces V5R21 - V5 Solution Enhancements to Support Customers’ Needs; Select Version 6 Capabilities Also Enabled in V5 Portfolio (05/07/2011 11:49:44)

Dassault Systèmes, a world leader in 3D and Product Lifecycle Management (PLM) solutions, announced today the availability of Version 5 Release 21 (V5R21). V5R21 demonstrates Dassault Systèmes' continued commitment to its popular PLM portfolio, currently deployed in over 100,000 customers worldwide. V5R21 solutions establish "digital continuity" from engineering to real shop floor manufacturing operations to support customer needs, while leveraging Version 6 technologies for better co-existence of V5 and V6 solutions in customer environments.

Adept Scientific continues to broaden its data acquisition range (05/07/2011 11:37:54)

As part of Adept Scientific's continuing strategy to provide a diverse and full range of data acquisition devices in the UK, the Delphin Technology AG hardware and software solutions for applications in process measuring and control technology has been added to complement their existing products.

AutomationDirect.com Adds 3D Product Models to Web Site using TracePartsOnline.net (05/07/2011 11:33:35)

AutomationDirect to offer controls engineers and designers native 3D models of automation products - industrial automation leader AutomationDirect is now using the TraceParts Internet service to provide 3D product models for controls engineers and designers, through their AutomationDirect.COM web site and the TracePartsOnline.net network of web sites. AutomationDirect's customers will be able to select the right product for their needs and then download neutral and native 3D CAD models of the products into their designs.

Innovative Colors – Special Effects: Ceresana Analyzes the Pigment Market (04/07/2011 13:40:50)

Pigments are needed in large quantities: Printing inks, paints & varnishes, plastics, and the coloring of construction materials are important growth markets. Other segments, such as cosmetics, paper, textiles, ceramics, and glass, use pigments to provide more gloss to their products. More and more manufacturers improve their packaging and promotional items by using modern colors and visual effects. Ceresana's first in-depth study on the global pigment market was soon out of stock – the new, updated study on pigments is now available.

New Millimetre Wave Connectors from Intelliconnect (04/07/2011 13:36:15)

Intelliconnect (Europe) Ltd, the specialist manufacturer of Coaxial and Triaxial RF connectors, announces the introduction of their new range of Millimetre Wave RF connectors. This new product range offers very competitive pricing, short lead-times and is backed by the excellent customer service that Intelliconnect have built their reputation on.

HYDRAULIC CYLINDER SLASHES POWER CONSUMPTION (04/07/2011 13:20:24)

Companies developing and building lathes with a spindle speed of up to 5,600 rpm have the option of fitting a new, hydraulically actuated, rotary chuck cylinder that typically consumes 1.5 kilowatt-hours over a daily shift, compared with 36 kilowatt-hours for a conventional cylinder. The reduction is nearly 96 per cent and equates to a saving of more than 19 kg of carbon dioxide.

POLAND PREPARES ITS HIGH TECH FUTURE WITH CC-LINK (04/07/2011 12:01:07)

The biggest automation and robotics training centre in Poland has just been opened in &#321;ód&#378;. It will train over 10,000 students and teachers a year as the country races to modernise its manufacturing and production infrastructure.

GAMBICA calls for greater VSD awareness in purchasing following IEA white paper ~ UK automation trade body GAMBICA supports International Energy Agency findings ~ (04/07/2011 11:56:37)

GAMBICA has responded to the International Energy Agency's white paper 'Energy-efficiency policy opportunities for electric motor-driven systems' by calling for purchasing teams to take action to implement the IEA's findings. The trade body also believes that machine builders and systems integrators can help reduce the energy demands of electrical motors by moving towards a standardised process for describing energy efficiency in quotations.

OPTIMA CONTROL SOLUTIONS HELPING MAKE BRITTON GREAT (04/07/2011 11:49:28)

A leading film and packaging supplier has made energy savings and been given a new lease of life to plant equipment following a drive and controls upgrade by Optima Control Solutions Ltd (OCS).

UNISON TO SUPPORT VTUBE SOFTWARE IN THE UK - powerful software accelerates fabrication of tubular part shapes (04/07/2011 11:26:48)

The tube bending machinery specialist Unison has won UK distribution rights for the VTube-STEP and VTube-LASER software packages from Advanced Tubular Technologies.

Large scale compressed air applications can now benefit from Parker’s Transair pipe technology (04/07/2011 11:17:30)

Parker Hannifin, the global leader in motion and control technologies, has expanded its already comprehensive range of lightweight aluminium Transair pipe systems with the introduction of a new high volume version to meet the demands of particularly large industrial sites and larger scale vacuum applications. Ideal for use as the primary network for compressed air supply in a diverse range of sectors, from the automotive and aeronautics industries, through food processing to printing works, the new 6" (168mm) diameter pipe system has been designed to complement the existing range of 16.5mm to 100mm pipe diameter sizes.

60mm stepper motor with integrated controller/driver has on-the-fly alteration of motion parameters (04/07/2011 11:12:08)

The PD-146-60-SE PANdrive™ from Trinamic is a full mechatronic solution, which includes a 60mm flange high torque motor, a motion controller/driver and an integrated high-resolution sensOstep™ encoder. The PANdrive™ is equipped with a high performance motion controller for high dynamic, high resolution and S-shaped acceleration ramps.

EAL APPLAUDS APPRENTICESHIP EFFORTS (04/07/2011 11:04:34)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), congratulates the winners of the National Apprenticeship Awards.

FORBES SOLICITORS CONTRACTS WITH shentongroup POWERCALL (04/07/2011 10:59:09)

Forbes Solicitors has contracted with shentongroup's unique emergency generator service, Powercall, to provide 'power within the hour' as part of its business continuity planning. Saving Forbes Solicitors capital expenditure and the challenges of siting, maintaining and refuelling a standby generator, the Powercall service will ensure that the company has emergency power in situ and connected up within a one hour target time.

ENERGY EFFICIENT FERRERO GROUP INVESTS IN GEM (04/07/2011 10:51:49)

Thermal Energy International Inc is pleased to announce that Energhe S.p.A. has made Thermal Energy International's GEM venturi orifice steam traps its steam trap of choice following rigorous testing at Ferrero Group's headquarters in Alba, Italy. Founded in 2007 by parent company, Ferrero Group, Energhe S.p.A. develops energy efficient projects and financial savings for the Ferrero Group. The company is also offering its services to other companies and plans to develop this service as it grows. To date 150 GEM steam traps have replaced mechanical traps in the Ferrero Group's sites in Italy, Germany and Ireland.

BUCKS COUNTY COUNCIL ANSWERS THE CALL WITH PROCESSING & AUTO ATTENDANT SYSTEM (04/07/2011 10:46:14)

Always looking for ways to provide an even quicker and more efficient service to its ratepayers, Buckinghamshire County Council has installed the state-of-the-art Interalia XMU+. The multi-functional auto attendant and call processing system is now handling large volumes of calls that would be impossible to respond to by live attendants alone

New Solid and Hollow Metric Shafting from SDP Are Designed for a Myriad of Applications (04/07/2011 10:40:53)

A new series of solid and hollow metric shafting from Stock Drive Products (SDP) (ISO 9001 Registered Manufacturer) are designed for a myriad of useful applications.

igus PPDS Floating Towing Arm (04/07/2011 10:34:31)

Long energy chain movements are now made safe and secure with igus PPDS floating towing arms, with condition monitoring built-in - Energy chains with particularly long travels, such as those found in large crane applications, can sometimes suffer lateral misalignment due to wear on trolley rails. igus PPDS floating towing arms can eliminate this misalignment safely and cost effectively.

Molex Antenna Business Unit Joins Forces with Aalborg University to Conduct 4G LTE Measurements (04/07/2011 10:30:39)

Collaboration between Molex and Aalborg University yields realistic 4G LTE measurements aimed at improving data connections for better mobile surfing in the future - – Molex Incorporated has announced that researchers from Aalborg University and antenna experts from Molex are conducting measurements in dense environments to ensure realistic results. The indoor experiments conducted in downtown Aalborg with prototypes of next generation LTE mobile phones will help give consumers better data connections to the portable devices of the future.

Eaton Completes Moeller Integration with Product Branding and Packaging Changes (04/07/2011 10:20:16)

Eaton today announced details of the product and packaging changes it is making to finalise integration of The Moeller Group, which it acquired in 2008. From 1st July 2011, the Moeller logo will start to be replaced by the Eaton logo on all products and packaging. These changes will flow through the supply chain throughout 2011 with a target completion date of 1st January 2012.

Meggitt Sensing Systems hires Marketing Communications Specialist (04/07/2011 10:17:11)

Meggitt, the manufacturer of industry-leading accelerometers and vibration sensing products, announced today that it has hired Shalvi Desai as the Marketing Communications Specialist for Wilcoxon Research products. Ms. Desai's marketing experience will enhance client communications and new product awareness.

Even Top Engineering University Applicants must have a Plan B (04/07/2011 10:14:35)

As 'A' Level students come to the end of their exams a leading educational charity has warned that even high achieving 'A' level students applying for university entrance this year must line up a "Plan B" in case they are unsuccessful in their applications.

SERAPID DUAL LINEARBEAM USED TO AUTOMATE PLATE BENDING APPLICATION (01/07/2011 09:58:52)

Inclusion of LinearBeam will increase productivity up to four times current levels - SERAPID, Inc of Sterling Heights, Mich., recently provided a dual LinearBeam push-pull system to Pacific Press Technologies in Mt. Carmel, Ill.,for a manipulator system to position a plate into a press brake.

Green Hills Software Expands Platform for Industrial Safety (01/07/2011 09:50:03)

New Partner Integrations Add to Industry's Most Comprehensive Safety Platform for Industrial Devices - Green Hills Software, the largest independent vendor of embedded software solutions, has partnered with KW Software, an internationally leading provider of solutions and technologies in the field of industrial control and safety technology, and Molex, a provider of complete interconnect solutions, to add new software integrations to its Platform for Industrial Safety. The Platform includes a complete set of development tools, a wide variety of middleware, industrial communications protocols, and services built around the IEC 61508 SIL 3-certified Green Hills INTEGRITY® real-time operating system (RTOS). These new partner integrations further expand the comprehensive set of pre-integrated software that enables the fastest time-to-market for developers of industrial automation, control, and safety systems.

FASTENING & ADHESIVES EXHIBITIONS ON A ROLL FOR ENGINEERS AT MOTORCYCLE MUSEUM (30/06/2011 14:45:46)

Visitors to the FAST and IASE exhibitions will start their fastening and adhesives discoveries on a roll: and a cup of tea when they visit the shows on October 20th, courtesy of the exhibition organizers who are providing a bacon bap and cuppa for all visitors who pre-register in advance.

Arrow Electronics EMEA chosen by STMicroelectronics for SPEAr embedded processors distribution - Arrow’s extensive European engineering services key to selection (30/06/2011 13:24:04)

Arrow Electronics EMEA has been chosen by STMicroelectronics (ST) as a specialist distribution partner for ST's SPEAr embedded microprocessor family. Arrow was selected from among ST's distribution network owing to its extensive engineering services capability and total solution provision, including the Arrow Embedded Platform Concept (EPC). An EPC board based on SPEAr processors is currently under development.

ENGINEER RECEIVES PRESTIGIOUS FELLOWSHIP AWARD (30/06/2011 13:03:12)

Neil Parkinson, Technical Director at South Manchester engineering consultancy, AV Technology (AVT), has joined an elite list of engineering professionals to be awarded a Fellowship of the Institution of Mechanical Engineers (IMechE).

MOVE UP TO AUTOMATED PLASMA CUTTING WITH SAMSON (30/06/2011 12:59:40)

Now available from ESAB Cutting Systems is the Samson entry-level plasma cutting table. It is ideal for those companies looking to move up from hand plasma cutting torches to an automated process in areas such as general metal fabrication, metal crafts, blacksmiths, heating & ventilation ductwork as well as sign making.

WELDABILITY-SIF TO INITIATE FOUNDATION LEVEL WELDER SKILLS TRAINING AT STEVENAGE SKILLS CENTRE (30/06/2011 12:52:53)

Weldability-Sif, the UK based supplier of MIG, TIG, MMA, Spot and Oxy/Fuel welding and Plasma cutting machines, torches, accessories, consumables and personal protective equipment is working alongside The Welding Institute (TWI), Cambridge, the UK's leading research institute in materials joining technologies and EAL certification, to initiate foundation level welder skills training at Stevenage Skills Centre as a first step towards a full apprenticeship programme.

Eaton Offers Hansen TH-Series Hydraulic Quick-Disconnect Couplings for Mobile And Industrial Applications (30/06/2011 12:48:34)

Diversified industrial manufacturer Eaton Corporation announced the availability of the TH-Series of quick-disconnect hydraulic couplings for mobile and industrial applications. The TH-Series is part of Eaton's line of Hansen® and Coupleurs Gromelle™ products which were acquired by Eaton in December, 2010.

GAMEWELL-FCI INTRODUCES SECOND LOC EMERGENCY COMMUNICATIONS CONSOLE (30/06/2011 12:38:38)

New Emergency Communications Offerings Provide Cost-Effective, Remote Control Capabilities - Gamewell-FCI by Honeywell has expanded its emergency communications systems capabilities with a second version of its Local Operator Console (LOC) used to remotely control emergency messaging and system operation. As major components of mass notification systems, LOCs are required by the Department of Defense (DoD) on all U.S. military installations, and prescribed by NFPA 72: National Fire Alarm and Signaling Code for commercial facilities.

Turbine blade manufacturer branches out into VIPER grinding of fir-tree root-forms (30/06/2011 12:27:09)

Until the middle of 2010, first-tier subcontract machinist, JJ Churchill, could produce turbine blades only if they had their fir-tree root-forms preground elsewhere, or if they were subsequently added by another subcontractor. No longer is this the case.

Marcel Heugen to Support PPT VISION’s European Market Development Strategies (30/06/2011 12:22:51)

Marcel Heugen, an expert in machine vision and industrial automation engineering, will now serve as a senior consultant for PPT VISION's European headquarters here. In this role, he will support PPT VISION's European Operations, headquartered in the Netherlands, under the direction of Ivar Keulers, European sales manager for PPT VISION.

New Range of Colour Visual Control Panels available from LPRS (30/06/2011 12:17:25)

Cost effective LCD and Touch-screen Panels for Industrial and Domestic Control - LPRS, Europe's leading supplier of short-range radio devices, announces the availability of the IQVCP range of Visual Control Panels. These competitively priced OEM LCD Display and Touch-Screen Controllers bring new levels of functionality to man-machine interfaces and may be fully integrated with the IQRF wireless communication system available from LPRS.

New miniature sensors suit mobile barometric pressure and altitude measurement (30/06/2011 12:12:25)

As part of its wide range of sensor products, Variohm EuroSensor supplies miniature altitude and barometric pressure modules from its distribution partner Measurement Specialities. The MEMS technology based modules feature a silicon micro-machined membrane with four implanted piezoresistors and are available as uncompensated sensor only components or surface mount analogue output devices, or as fully calibrated digital modules supplied in a variety of packaging and interconnection options. Applications range from mobile altimeter/barometer and weather monitoring systems to adventure watches, mobile navigation devices, variometers and dataloggers.

Dassault Systèmes Goes Cloud with Version 6 - First to provide a comprehensive platform to build and deploy 3D, PLM and solutions experiences with greater flexibility and efficiency (30/06/2011 12:06:39)

Dassault Systèmes (3DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, today announced its new online Version 6 platform, open for the developer community, its new store, and its first online cloud business services. Dassault Systèmes also announces its strategic investment in Outscale, a start-up providing next generation SaaS (software as a service) operator services.

LIFTING BEAMS - PAL is VERLINDE's most recent range of lifting beams for loads of 125 to 10,000 kg. (30/06/2011 11:58:45)

With its rupture safety factor rated 5, the PAL range is manufactured to standard NFE 52210 and classed FEM5. The lifting beams have no load bearing welded parts, are rustproof and coated with RAL1028 glycerine paint All models are fitted as standard with bow shackles, reel hooks and safety latches.

ATTRACTIVE NEW POLYAMIDE HINGES FROM FDB PANEL FITTINGS (30/06/2011 11:51:08)

The new 54 series of hinges from the Panel Fittings specialists at FDB are designed with a view to optimising aesthetic style, lightness and strength. They are specifically intended for enclosures, 19 inch racks, cabinets, door panels in the specialist panel industry and for storage boxes, personal storage facilities, special machines etc where their curved style adds a certain design flair to the finished item.

FDT GROUP COMPLETES INTEGRATION OF CC-LINK OPEN NETWORKS (30/06/2011 11:47:07)

The SPS/IPC/DRIVES 2010 fair saw the announcement that the CC-Link Partner Association (CLPA) had signed an agreement with the FDT Group to incorporate the CC-Link family of open networks into the FDT standard by development of a protocol annex.

Grooving and threading cutter offers more profiles (30/06/2011 11:41:16)

New inserts for CoroMill 328 provide users with greater machining choice - Offering external and internal slotting, grooving and circlip grooving (with chamfer) as well as full profile internal threading, new inserts for Sandvik Coromant's CoroMill® 328 offer customers a wider range of profile choices than previously available.

ISA Announces Calum Pearson of Cirque du Soleil as Automation Career Day Keynote Speaker (29/06/2011 16:56:55)

The International Society of Automation (ISA) and the Automation Federation (AF) announce that the Vice President of Technical and Show Support for the Resident Show Division of Cirque du Soleil, Calum Pearson, will deliver the keynote address at Automation Career Day on Wednesday, 19 October 2011 at the Arthur R. Outlaw Convention Center in Mobile, Alabama, USA.

From Lean Connectivity to Lean Automation: New Eaton HMI/PLCs Integrate SmartWire-DT Master (29/06/2011 16:36:48)

Eaton has launched new XV102 touch screen PLCs that offer high-performance HMI/PLCs with an integrated SmartWire-DT master. SmartWire-DT is a comprehensive connection and communication technology system that replaces the control wiring in all components, from circuit-breakers, motor starters and frequency inverters to pilot devices and sensors.

New SKF Low Weight Hub Bearing Unit leads the way in contributing to greater fuel efficiency and lower CO2 emissions (29/06/2011 16:27:51)

SKF, the knowledge engineering company, has developed a new low weight hub bearing unit that can reduce component weight by up to 40% when compared with traditional plain hub bearing units. These lighter units are designed for use on cars, including electric and light commercial vehicles, benefiting car manufacturers as well as the automotive aftermarket by offering improved handling, greater load capacity, increased fuel savings and reduced CO2 emissions to the end user.

Catalog Data Solutions Selected by HBD/Thermoid, Inc. (29/06/2011 16:18:15)

Catalog Data Solutions (CDS), a leading provider of online solutions for industrial suppliers, today announced that HBD/Thermoid, Inc. has selected its online SaaS Catalog solution.

National Semiconductor Introduces Industry’s First High-voltage PMBus System Power Management and Protection ICs (29/06/2011 16:11:17)

High-voltage Hot Swap Controllers with Integrated System Power Measurement Improve Reliability, Enable Lower Power Consumption in Telecom Infrastructure Systems - National Semiconductor Corp. today introduced two new high-voltage system power management and protection integrated circuits (ICs) with on-chip power management bus (PMBus) support. The 48V input voltage LM5066 and -48V input voltage LM5064 integrate high-performance system protection and management blocks that precisely measure, control and manage the electrical operating conditions in systems such as routers, switches and base stations. The LM5066 and LM5064 enable comprehensive system power management for improving system reliability and reducing power consumption in wired and wireless telecom infrastructure systems that operate from high-voltage system backplanes.

Renishaw announces expansion plans (29/06/2011 16:00:08)

In response to increased demand for its measurement and healthcare products, Renishaw, the UK-based engineering company, is announcing a series of initiatives designed to provide the additional capacity required for its anticipated business growth over the longer term. These include the acquisition of the soon to be vacant Bosch manufacturing facility, located to the west of Cardiff, Wales, and the submission of planning applications to extend three of its existing facilities in Gloucestershire.

EX rated enclosures and junction boxes for hazardous areas (29/06/2011 15:56:54)

CEE Norm can meet the needs of enclosures for hazardous areas with Hensel's EX certified range of cable junction boxes, terminal boxes and empty boxes. The DK series enclosures are suitable for use in Zone 2 and Zone 22 hazardous areas as defined by ATEX where the presence of dust or gas creates the potential for explosion and where any sources of ignition must be eliminated.

Parker Hydraulic piston pumps now incorporate proportional pressure control for mobile applications (29/06/2011 12:41:16)

A new range of hydraulic piston pumps has been launched to help reduce the size of fan drive systems for both on- and off-highway vehicles. Developed by Parker Hannifin, and based on the company's proven P1 piston pump, the new system features a dedicated proportional pressure control valve, built directly into the pump assembly. This effectively minimises system size and weight, without affecting overall performance or functionality, and enables design engineers to make best use of the space available on each vehicle; additionally, as part of the hydraulic fan drive system, the new system contributes to improved fuel efficiency and emission reduction.

Fluke sponsors WorldSkills London 2011 (29/06/2011 12:33:53)

Fluke, the global leader in portable electronic test and measurement technology, has announced its sponsorship of WorldSkills London 2011, which will be held over four days at the ExCeL London exhibition and conference centre in London's docklands from 5-8 October 2011.

Mitsubishi Electric marks 30 years of success in variable speed drives (29/06/2011 12:27:56)

World machinery announces official opening of new showroom and engineering works - Laser machine specialist World Machinery Ltd. has announced the official opening of its new midlands showroom, HQ and Showrooms based between Kidderminster & Bridgnorth in Shropshire. Having recently used the new 13,000 sq. ft. site to showcase Mitsubishi Electric's latest 2D Laser Processing System, the new premises are now open for business providing a demonstration area, engineering works, software demonstration and conference facility.

HUBER+ SUHNER’s RF Test & Measurement Connectivity Products Available From Stock At Lane Electronics (29/06/2011 07:34:37)

Lane Electronics, recognized as an industry leader for the supply of electrical and electronic interconnection products, has full ex.stock availability of HUBER+SUHNER's RF Test and Measurement connectivity products. What is more, as an e.commerce partner with HUBER+SUHNER, customers can select and purchase HUBER+SUHNER's wide ranging portfolio of test leads, adaptors, terminations, attenuators and test kits via the company's website – www.hubersuhner.com – for delivery, from Lane Electronics, the following day.

Fibre Optic Cable from HUBER+SUHNER gains approval for use throughout London Underground (29/06/2011 07:32:35)

HUBER+SUHNER, recognized by many as the leader in fibre optic connectivity, announces that its latest fibre optic cable has been authorized for use throughout the London Underground (LUL) Network by meeting the fire, smoke and toxic fume requirements of LUL's 1-085 standard.

EMKA CONCEALED HINGE FOR FLUSH DOORS (28/06/2011 16:50:50)

Refinements flow from "everything but the enclosure" hardware specialists EMKA. A recent addition features the 1056 program externally fitted flush door hinge with concealed internal fixings and 165° opening. This is well suited to all kinds of street furniture and industrial electronic/electrical control rack-cabinets.

Altium invests in global services team (28/06/2011 16:41:47)

Ex-Cadence talent Christian Scheiba to extend Altium's professional and consulting services – Altium announces the appointment of Christian Scheiba, who has joined the European team in Karlsruhe, Germany, as Director of Global Services.

‘Sudlows breaks turnover record’ (28/06/2011 16:36:04)

DATA centre design and build specialists, Sudlows, have announced a record turnover of £11 million for the year to date. The award winning company, who have offices in both Manchester and London, has increased its annual turnover by an impressive 72%.

Pentair Technical Products, Hoffman QUICK TRAY PRO™ Cable Tray Offers Enhanced Aesthetics and Expanded Design Flexibility (28/06/2011 09:19:39)

pentair Technical products, inc. announces the Hoffman QUICK TRAY PRO™ line of cable tray featuring enhanced aesthetics, numerous size offerings and diverse accessories. The line of cable tray features a non-snagging T-weld design, eliminating hazardous sharp edges and catch points, and ensuring reliable cable organization and protection. QUICK TRAY PRO cable tray is available in 2, 4 and 6 depths and widths from 4 to 24 to suit a broad range of design specifications. Fill ratings range from 122 to 2,200 cables, based on a standard CAT 6 cable diameter. Custom sizes are available to suit specific requirements, and accessory splices and connectors allow for integration and compatibility with other cable tray brands and/or legacy installations.

Igus UK plastics for longer life - igus offers excellent all-round service (28/06/2011 09:07:24)

Since its founding twenty years ago in Northampton, igus UK has earned a solid reputation for excellent all-round service and grown from strength to strength. The recipe for success lies in the combination of its ever increasing innovative product range, consisting of iglidur® polymer bearings, plastic e-chains® and flexible chainflex® cables, and the fact that igus has a genuine understanding of the engineering sector and what its customers need.

Altair Releases HyperWorks 11.0, Creating the Most Comprehensive Open-Architecture CAE Solution in Engineering (27/06/2011 15:01:37)

Altair Engineering, Inc., a leading global provider of simulation technology and engineering services, today announced the release of HyperWorks 11.0, the latest version of the engineering industry's most popular computer-aided engineering (CAE) software suite. Highlights of HyperWorks 11.0 include the addition of two new software products to the HyperWorks suite; AcuSolve and solidThinking. It also offers a greatly extended breadth of solver solutions in RADIOSS, allowing engineers to efficiently address today's complex design challenges.

Electrolube Develop an Innovative LED Product for the European Market (27/06/2011 14:54:29)

As Productronica, the world's leading trade show for electronics fast approaches, electro-chemical manufacturer, Electrolube has released information of an innovative LED product that will be launched to the European market during the four-day event.

Micromech appointed distributor for Parker Origa linear drives (27/06/2011 14:47:31)

Following the recent acquisition of Origa by Parker, Micromech has been appointed the UK distributor for their entirely new generation of linear drives. This is Parker ORIGA's second generation of linear drives that gives design engineers ultimate flexibility. The well-known Origa cylinder is now a combined linear actuator, guidance and control package.

NEW TIG/MMA INVERTER WELDER FROM WELDABILITY-SIF (27/06/2011 14:13:34)

The TIG150HF from Weldability-SIF, the UK based supplier of MIG, TIG, MMA, Spot and Oxy/Fuel welding and Plasma cutting machines, torches, accessories, consumables and personal protective equipment, is a brand new, light weight (12kg), single phase 230V, 13A, DC TIG/MMA inverter based welding machine featuring IGBT (insulated gate bipolar transistor) technology, TIG Lift arc and HF (High Frequency) arc ignition.

MLE Creative recruits technical specialists to its medical and healthcare team - Company growth fuels need for additional team members (27/06/2011 14:08:58)

Following continuing company growth within the medical device sector, MLE Creative Electronics, innovators in medical electronics design, has recruited two technical specialists to further enhance customer support within the medical market. Joining MLE's medical and healthcare team, Rod Lane heads up the Engineering unit as Technical Development Manager, whilst Jeff Pickering joins as Technical Sales Engineer.

solidThinking to Showcase its Latest Software at New Designers 2011 July 6-9 in London (27/06/2011 13:54:10)

solidThinking, Inc, a global concept design and styling software company, have announced that it will participate at the New Designers 2011 Show July 6-9 at the Business Design Centre in London. With its longstanding reputation for bringing young design talents and businesses together, New Designers partners with prestigious, forward thinking and innovative organizations to highlight inspiring, fresh and exciting new work and ideas. It is the only design event that brings together more than 3,500 graduates from all major design disciplines.

RAILENIUM gets €550 million boost from French government (27/06/2011 13:45:56)

RAILENIUM, the European Institute for Technological Research in Rail Infrastructure, has been selected by the French government as a leading investment project and has been awarded €550 million in funding. This major European and international project, which will support R&D, innovation and engineering training in rail infrastructure, as well as promoting French and European technological excellence, is now ready to get under way. It will be based in and around Lille, in northern France.

ISA Releases ISA Automation Week 2011 Advance Program (27/06/2011 11:50:24)

The International Society of Automation (ISA) announced today the release of the Advance Program for ISA Automation Week: Technology and Solutions Event.

SERAPID WELCOMES THREE NEW EMPLOYEES IN JUNE - New staff members hired for growing linear motion company (27/06/2011 11:43:27)

SERAPID, Inc, Sterling Heights, Mich., hired three new employees for positions in engineering and manufacturing. They welcome– Devin Badaczewski, Emanuel Chirila and Anthony Lelej.

SELF DISCHARGING BULK CARRIER OPERATORS SAFEGUARD THEIR ASSETS, PERSONNEL & THE ENVIRONMENT BY USING WEAR PROTECTION (27/06/2011 09:23:50)

Self discharging bulk carriers are a key component in the global commodity boom, providing fast unloading and quick turnaround to meet increasing market demands, at the same time maximising ROI for vessel operators. However, the extremely demanding operating pressures under which the carriers operate means that the benefits they provide are only sustainable if the bulk operator takes measures to counteract the detrimental effects of bulk cargoes that can be very dense, corrosive and abrasive.

Sticklers® Create New Relations at BICSI (24/06/2011 16:51:35)

With the fibre optic communication industry growing annually, and with the technological advancements and market increasing, it was no surprise that Sticklers® Fibre Optic Cleaning Products were of great interest at the BICSI European Conference and Exhibition.

WEG LAUNCHES WIMES COMPLIANT W22 LINE OF HIGH EFFICIENCY MOTORS, EXCEEDING REQUIREMENTS OF NEW IE2 & IE3 CLASSIFICATIONS (24/06/2011 15:53:58)

WEG is meeting the demands for high efficiency operation across water and waste water treatment applications with its WIMES compliant W22 line of motors, one of the most energy efficient ranges on the market today. The W22 WIMES line is available in two versions, both backed by a 3-year warranty, and both designed to exceed the requirements of the new IE2 (High) and IE3 (Premium) efficiency classes. Importantly, the IE3 Premium Efficiency versions of the motors are available now, in standard IEC frame sizes, well in advance of the next phase of the Energy using Products (EuP) Motor Regulations due for implementation in 2015/2017.

aPriori Continues EMEA Expansion - New EMEA Director, sales and support offices in France, Germany and the U.K. further accelerate growth in Europe (24/06/2011 15:48:58)

aPriori, a provider of product cost management software solutions for discrete manufacturers, today announced the expansion of its team in Europe, including a new Director of EMEA. The company has opened new offices in Strasbourg, France; Hamburg, Germany; and Surrey, England. These moves will further accelerate aPriori's growth in Europe and complement its existing partner relationships there.

ADULT APPRENTICESHIP GROWTH MUST BE SUSTAINED (24/06/2011 15:40:17)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), welcomes news that the Government has exceeded its targets for creating adult apprenticeship places but warns that this growth must be sustained and spread throughout the industry to have a lasting impact.

ELESA HAS STANDARD COMPONENTS FOR PRINTING AND PAPER PROCESSING MACHINES (24/06/2011 15:02:25)

The Elesa catalogue of standard machine components incorporates many ideally suited to machines within the printing and paper processing industries. In particular the DD52 series digital shaft position indicators, adjustable and vibration damping levelling feet, GN727 micrometer adjustable control knobs, GN700 continuous locking components and the CFA series plastic hinges which suit many types of machine guards.

Greenvale capitalise on robot’s flexibility (24/06/2011 12:20:44)

Four robots used for packaging at Greenvale, the UK's largest supplier of fresh potatoes, have proved to be highly flexible over their ten years of operation. Undergoing three major system upgrades over the ten years, to meet customer packaging and volume demands, the four FANUC Robotics robots continue to provide a strong return on investment.

SKF fryer bearings increase reliability for food processing (24/06/2011 12:12:37)

SKF, the leading knowledge engineering company, has launched its SKF fryer bearings specifically designed for use on automatic frying equipment and capable of withstanding the demanding oil-filled environment and high temperatures of fried food processing. The SKF fryer bearing units offer extended bearing service life, are corrosion resistant and maintenance free, while benefitting manufacturers in food processing sectors where reliability and risk of contamination are key obstacles in ensuring optimum productivity and keeping production costs to a minimum.

LPRS Unveil IQRF Wireless Networking Components at UK Wireless Forum - Wireless Fortronic Forum – Williams F1 Conference Centre, Oxford, July 28th (24/06/2011 12:00:31)

LPRS, Europe's leading supplier of short-range radio devices, is using their appearance at the UK Wireless Fortronic Forum to demonstrate the IQRF range of simple to implement, reliable wireless networks for smart metering, home and building automation, intelligent street lighting and environmental monitoring. The event will also be the first opportunity for visitors to see the latest generation of LPRS's market leading easyRadio, eRA and new developments from Wireless Module manufacturer Circuit Design Inc.

International prize brings future of artificial intelligence to Exeter (24/06/2011 10:18:32)

It is a proposition straight from the realms of sci-fi – can we create machines that imitate humans so well that we can no longer tell the difference? Far from being a concern for the far-off future, this question is already being put to the test in an international competition, set to come to the South West for the first time in its history.

Speed Controller SC 5004 & 5008 for Brushed and Brushless DC Motors (24/06/2011 10:07:37)

MICROMO and the FAULHABER Group is adding two new Speed Controllers to its controller range. The PI Controller series is software-configurable – so no need for trimmers or DIP switches – and can be operated with one and the same controller, either as brushed direct current motors (DC) or electronically commuted drives (BL), also with integrated Hall sensors. Depending on the operating mode, the speed can be controlled to between 50 and 60,000 rpm.

Nanotec - New SMCI36 motor controller (24/06/2011 09:59:20)

Nanotec presents its new SMCI36 motor controller. With dspDrive® and ClosedLoop, Nanotec focuses on the needs of engineers who are looking for quick, small and energy-efficient solutions for distributed applications. Demand is increasing for technologies as ClosedLoop and CANopen. ClosedLoop provides energy-efficient motor controlling, and with the field-oriented control expensive geared servomotor systems can be replaced with more favourably-priced stepper motors. This is particularly true for rotational speeds of up to 1,500 rpm or torques of up to 10 Nm. The CANopen bus standard enables rapid communication between the individual components of motion control solutions.

DPM - 63S10 ultra flat stepper motor (24/06/2011 09:52:34)

The ultraflat, high torque DPM-63S10 stepper motors with a step angle of 1.8° supports designers who require maximum torque and high positional accuracy combined with minimum overall height.

The new EtaCrown® 75 - opens new doors for a myriad of applications (24/06/2011 09:43:02)

Delta Line presents the EtaCrown® 75 – an innovative high performances crown gear fully developed by Zeitlauf and dedicated mainly to conveyors, doors systems or medical applications.

Premier Farnell first to stock Microchip and Digilent’s chipKIT 32-bit Microcontroller Development Platform in Arduino™ form-factor (24/06/2011 09:29:18)

Premier Farnell plc, the leading multichannel distributor, is first to stock Microchip Technology Inc and Digilent, Inc's first chipKIT™ 32-bit microcontroller development platform. Microchip Technology Inc., a leading provider of microcontroller, analogue and Flash-IP solutions, and Digilent, Inc. recently launched the first 32-bit-microcontroller-based, open-source development platform that conforms to Arduino™ hardware and software. Designed and manufactured by Digilent, a Microchip Authorised Design Partner, the chipKIT™ platform is the first 32-bit solution in Arduino™ form-factor in the industry to enable hobbyists and academics to easily, and inexpensively, integrate electronics into their projects, even if they do not have an electronic-engineering background. The platform consists of two PIC32-based development boards – Uno32 and Max32.

VOCATIONAL EDUCATION RECOGNISED WITH NEW APPRENTICE CARD (24/06/2011 09:24:20)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), welcomes the latest commitment to raise the profile of apprenticeships with open arms and hopes this will achieve greater parity between skills education and the non-vocational route.

New ParkerStore opens in Leicester to meet growing demand (23/06/2011 14:44:40)

Beaumanor Engineering Limited has partnered with Parker Hannifin, the global leader in motion and control technologies, to open a dedicated ParkerStore covering the Leicester and local area. The new enhanced product range from the Leicester-based fluid power products and services provider will benefit all its existing and new customers in all areas of trade and industry.

The Power and the Glory (23/06/2011 14:38:54)

They may be conceptually simple, but transformer specification holds a few pitfalls for the unwary. James Mousley of CEE Norm looks at some of the specification considerations. Ask 100 people for their list of the ten most important electrical inventions, and I'd wager you'd get a broadly similar list. Doubtless television would be in there. Probably the telephone and radio, too. The more component savvy might offer up the thermionic valve. How many, though, would put the transformer on their list. Most likely, even if they acknowledge the work of Michael Faraday and his experiments on induction between coils of the wire in the 1830s, the transformer itself will be a sad omission from the list of greats. And yet, without it, the world today would be a very different place.

EtherCAT for JVL integrated servo motors (23/06/2011 14:28:54)

JVL is one of the leading companies in the field of integrated servo and stepper motors. For their medium and high power MAC motor's, from 400 W to 3000 W, yet another expansion module has been added: The EtherCAT Industrial Ethernet module. To supplement the already existing modules like CANopen, Profibus, Devicenet, NanoPLC, BlueTooth and WLAN etc. was there a demand from the market to develop a new series of Industrial Ethernet modules starting with EtherCAT and EtherNet/IP. Later ProfiNet, Modbus TCP, Powerlink or Sercos III will be announced. One of the requests for this new module was that hardware to all protocols should be the same so customer at installation time could decide which protocol to use. Thereby can customer save money for stock and new Industrial Ethernet products could be launch very rapidly after approval of the industry. All modules are equipped with robust M12 connector to archive high IP protection and also internal switch technology with Ethernet IN and OUT

£2.4 million machine tool sales from DMG productivity days (23/06/2011 14:23:54)

A dozen machines with an average order value of £200,000 were sold at the productivity days held by DMG at the International Manufacturing Centre, University of Warwick, from 7th to 10th June 2011. The orders comprised turning and 5-axis machining centres, including some from the manufacturer's new, entry-level, EcoLine range.

Legrand's prefabricated cable pits rise above the competition (23/06/2011 14:17:58)

Legrand of France, a manufacturer of prefabricated cable pits made from recycled composites, has developed cable pits that represent a lighter alternative to their concrete equivalent. The time saved through quick assembly helps to reduce the need for supervisory staff, while the patented device also offers a host of other advantages, such as easier cable access and simpler installation procedures. Legrand is one of SNCF's preferred suppliers.

EDBRO MANUFACTURES LONGEST EVER TELESCOPIC CYLINDERS FOR UNIQUE UK- DESIGNED CONTAINER LOADING SYSTEM FOR SCRAP METALS (23/06/2011 14:12:05)

Dunn Bros, a leader in metal recycling has used its industry expertise to develop the Horizontal Container Ejection Loader, a fast efficient, safe and extremely cost effective system for loading processed scrap metals into 20ft and 40ft containers, without the need to remove them from the delivery vehicle. Key to the reliable operation of the loading system are Edbro's RK series of telescopic cylinders which, at 12.5 metre stroke, are the largest ever produced by the British company.

ON Semiconductor expands serial EEPROM portfolio (23/06/2011 14:03:15)

Introduction includes new high density devices for the automotive, medical, and consumer markets - ON Semiconductor, a premier supplier of high performance silicon solutions for energy efficient electronics, has released new EEPROM (Electrically Erasable Programmable Read-Only Memory) devices for the automotive, medical, and consumer markets.

Competitively priced angle sensors take advantage of economy-of-scale automotive manufacture (23/06/2011 13:58:22)

Through its distribution partnership with Novotechnik, the German Tier One automotive sensor manufacturer, Variohm EuroSensor has launched two new potentiometric angle sensors that have exceptional price/performance ratios through high volume 'economies-of-scale' manufacture.

LPRS Wireless Modules Used to Protect Art and Museum Collections from Environmental Damage (23/06/2011 09:40:24)

"LPRS are not just an important supplier but a key member of our team. They combine quality products with helpful advice and are great people to work with. I would have no problems recommending LPRS to anyone." - Samantha Greatbatch, MD of Meaco Measurement and Control.

GF Piping Systems' CPVC Schedule 80 Pipe Achieves NSF Certification - Conforms to Standards for Use in Potable Water and Drinking Water Applications (23/06/2011 09:25:48)

GF Piping Systems' CPVC Schedule 80 Pipe is now certified by the National Sanitation Foundation (NSF) in compliance with NSF/ANSI Standard 14 and Standard 61. This distinguished certification assures users of suitability and safety for use in potable water applications (NSF- 14) and drinking water system components (NSF-61).

Metal Service Center JACQUET Mid Atlantic Adds 4th Water Jet Cutting Machine (23/06/2011 09:19:18)

Metals Processing and Distribution Center Specializes in Stainless Steel, Nickel Alloys - Waterjet systems manufacturer Jet Edge, Inc. is pleased to announce that JACQUET Mid Atlantic has added a fourth Jet Edge water jet cutting machine at its metal processing facility in Pottstown, Pa. The Mid Rail Gantry system is JACQUET's ninth Jet Edge waterjet nationwide.

NOTIFIER FIRE ALARMS SEISMIC-CERTIFIED AND IN-USE - California Hospital Receives Seismic-Certified Fire Alarm Transplant (23/06/2011 09:09:53)

NOTIFIER by Honeywell has earned International Building Code (IBC) seismic certification on its entire portfolio of fire alarm and emergency communications systems. All conventional and addressable fire alarm control panels, digital voice command systems and networking components, including NOTIFIER's ONYX FirstVision™ touch screen display for first responder scene assessment, passed a series of lengthy shake tests performed by a Certified Seismic Qualification Agency.

U-Shaped Connectors Perfect for LED Lighting Applications (23/06/2011 09:02:35)

Board to board connector specialists GradConn launch U-Shaped thru hole connectors for planar PCB mating.

NITROGEN-METHANOL PROCESSES FOR HEAT TREATING STEEL ARE MORE EFFICIENT & TRANSPARENT WITH BURKERT’S LIQUID FLOW CONTROLLER (22/06/2011 16:10:30)

The Institute for Materials Engineering (IWT) in Bremen, Germany, is engaged intensively with the hardening of steel using the Nitrogen-Methanol Process as an alternative to gas carburising with endogas. In this process, liquid methanol is directly introduced into a furnace, the precise regulation of the methanol controlled by Bürkert's v (LFC). The advantages of this method are that dosing of the methanol is achieved with high precision and is transparent: recording the reproducible consumption and flow values is carried out through the LFC and can be fully documented.

Rags and thick sludges can’t halt Landia’s mixers (22/06/2011 15:56:43)

Mixers made by Landia have proved that they can operate rag-free at one of the UK's largest and most innovative sludge treatment centres, based in the Midlands.

Balver Zinn Group and Cobar Europe BV/Cobar Solder Products to Sponsor the 4th Annual SMTAI Golf Tournament (22/06/2011 15:24:07)

The Balver Zinn Group and Cobar Europe BV/Cobar Solder Products Inc. announce that the companies will sponsor the 4th Annual SMTAI Golf Tournament, scheduled to take place Thursday, October 20, 2011 at The Golf Club at Fossil Creek in Fort Worth, TX. The companies also will sponsor the Conference Pocket Guide for the upcoming SMTA International Conference & Exhibition, scheduled to take place October 18-19, 2011 at the Fort Worth Convention Center in Fort Worth, TX.

Altium and Würth Elektronik collaborate on new component libraries - More than 1,500 passive components from Würth Elektronik available through AltiumLive (22/06/2011 15:15:23)

Altium announces a comprehensive set of passive components from Würth Elektronik is available for Altium Designer 10 through the recently launched AltiumLive portal. Electronic designers will have access to eight new libraries comprising over 1,500 passive components provided by one of the leaders of EMC solutions for the electronics industry.

24-bit analog output generates signals up to 96 kHz - High-Resolution USB Data Acquisition Module for Audio and Acoustic Testing (22/06/2011 14:58:24)

Data Translation announces the release of a new high-performance data acquisition module for sound and vibration analysis. The DT9837C features 24-bit resolution and is designed specifically for audio testing and acoustic measurement applications. For easy portability, the compact module is USB powered. The new DT9837C provides four 24-bit A/D inputs with software-programmable IEPE sensor functions, anti-aliasing filters, and an analog 24-bit output for generating signals with a maximum sampling frequency of 96 kHz.

High-Speed Fiber placement on large complex structures (22/06/2011 13:51:06)

Reducing aircraft weight is essential to boosting fuel efficiency. Not only is it important in terms of costs, but also given the ever-increasing distances that airplanes of the future are expected to travel more capacity is essential.

CC-LINK STRENGTHENS COMMITMENT TO EUROPE WITH MULTI-LANGUAGE WEB PRESENCE (22/06/2011 13:45:55)

The CC-Link Partner Association (CLPA) has added a full multi-language capability to their European website, www.the-non-stop-open-network.com.This significant investment has resulted in nine language options being available.

TEMPERATURE RESISTANT RUBBER TOUGHENED CYANOACRYLATE “INSTANT” ADHESIVE FOR SPECIALIST APPLICATIONS (22/06/2011 12:39:56)

These days "instant" or "superglues" have developed a long way from the general purpose domestic product we have all become familiar with. The Intertronics "adhere" ADH9105 is an excellent example of a precision engineered application specific adhesive for the high technology industries. adhere ADH9105 has higher impact, humidity and temperature resistance with a more flexible bond than mainstream cyanoacrylates – thus making it the adhesive of choice where gap filling and resistance to vibration, thermal shock or motion compliance are required, for example in mounting of electrical or electronic components, assembly of enclosures, cable boxes or in strain relief or simple wire tacking, e.g. in loudspeakers.

National Remembers Legendary Analogue Expert Bob Pease (22/06/2011 11:32:49)

National Semiconductor have looked back on the accomplishments of legendary design engineer Bob Pease, who died June 18. During his 33 years at National, Pease received 21 patents and designed more than 20 integrated circuits.

Dolomite launches Multiflux™, a new open standard changing the world of microfluidic connections (22/06/2011 10:06:37)

Dolomite, a world leader in design and manufacture of microfluidic devices, has introduced Multiflux, a unique and flexible range of microfluidic connectors and interfaces allowing users to intergrate their microfluidic devices into new and existing systems by creating fast and reliable multi-way fluidic connections between pumps, valves and other microfluidic devices.

Real time fluid cleanliness monitoring with Parker’s new icountOS Oil Sampler (22/06/2011 09:57:03)

Parker Hannifin, the global leader in motion and control technologies, has enhanced its range of icount online particle and moisture detectors with the introduction of an innovative new self contained and portable device for measuring the quality and cleanliness of hydraulic oils and hydrocarbon fuels. Called the icountOS (Oil Sampler), this new competitively priced system incorporates a laser detection particle counter, battery and pump into a single integrated unit for the real time condition monitoring of fluids, thereby helping maintenance engineers to maximise productivity and extend system life.

Smart Cities platform from Libelium allows system integrators to monitor noise, pollution, structural health and waste management (22/06/2011 09:50:27)

New sensor board completes Libelium's Smart Cities solution, enabling installation of services ranging from noise pollution monitoring to smart waste management. Libelium, a technology leader in wireless sensor networks, announces the completion of its Smart Cities platform. A new sensor board measures noise pollution, dust quantities, structural health and garbage levels. This board may be combined in a network with previously available sensor boards - for gas monitoring, radiation detection and Smart Parking - thus offering a comprehensive range of sensors for urban use. System integrators can now create a comprehensive range of services based on the Smart Cities platform.

Sensortechnics’ Highly Sensitive LBA Differential Pressure Sensors Offer New Ultra-Low Pressure Ranges From 25 Pa (22/06/2011 09:45:57)

Sensortechnics' LBA differential pressure sensors are based on thermal mass flow measurement of air or gas through a micro-flow channel integrated within the silicon sensor chip. Due to the highly sensitive measuring principle the LBA sensor achieves excellent resolution and offset stability. The LBA series now offers, ultra-low pressure ranges from 25 Pa Full Scale in addition to the existing 250 Pa and 500 Pa ranges. The LBA sensors perform fully analog on-chip CMOS signal conditioning to allow for linear and temperature compensated outputs with fast response times.

Newcrest Mining to use Cadac Organice for Controlled Documents - Newcrest Mining Ltd will use Cadac Organice and SharePoint to manage controlled documents for asset management (22/06/2011 09:38:20)

Cadac Organice, a Microsoft Partner Network member and developer of the Cadac Organice Product Suite has received an order from Newcrest Mining. Newcrest Mining will use Cadac Organice and SharePoint to manage controlled documents for asset management.

Banner SureCross™ Industrial Wireless I/O Network Brochure Provides Comprehensive Overview on New Wireless Radios and Network Solutions (22/06/2011 09:31:42)

The SureCross™ Industrial Wireless I/O Network brochure is now available in both a print and an interactive version. The brochure provides comprehensive information on a new line of SureCross Performance 1-watt radios. These new radios offer increased I/O counts to accommodate most application requirements, in addition to a higher-powered radio transmitter to increase the range of wireless networks.

Low Profile Molex ClipLok Interconnect Clip Firmly Secures Circuit-to-Board Connections - ClipLok interconnect solution supports demanding design constraints and enables feature-rich applications at a reduced overall cost (22/06/2011 09:26:38)

Molex Incorporated introduces the ClipLok™ interconnect clip, an electromechanical connection that easily attaches to secure a membrane switch or FPC tail firmly to a printed circuit board, eliminating the need for mating connectors at each point. A first-to-market product, the low-profile ClipLok interconnect clip provides immediate and reliable circuit-to-board connectivity in a range of consumer, medical, networking and telecommunications applications.

SmartWire-DT Controls Tunnelling Machine (22/06/2011 09:21:43)

Eaton's SmartWire-DT device is being used by mts Perforator GmbH to control its new tunneling machines. SmartWire-DT is a comprehensive connection and communication technology from Eaton, one of the leading manufacturers of components, systems and solutions for electrical engineering and automation.

Optimized 4-20 mA vibration sensors with lower profile (22/06/2011 09:10:22)

Meggitt, the manufacturer of Wilcoxon Research™ accelerometers, which lead the industry in quality and reliability, has reduced the size and enhanced the performance of several side exit 4-20 mA vibration sensors. The optimized PCC421 and PCC423 series are smaller, lighter and operate at 105° C, an improvement over previous versions and competitive products.

National Semiconductor to Discuss and Demonstrate PCI Express Gen-3 Repeaters at PCI-SIG Developers Conference (22/06/2011 09:05:54)

National Semiconductor Corp. will showcase its industry-leading PCI Express® (PCIe) Gen-3 repeaters and will discuss techniques for extending the PCIe 1.0/2.0/3.0 link reach at the PCI-SIG Developers Conference at the Santa Clara Convention Center in Santa Clara from June 22-23, 2011.

Dymola modelling technology helps to create next generation low carbon vehicles (21/06/2011 16:43:20)

WMG, formerly Warwick Manufacturing Group at the University of Warwick, is using Dymola modelling technology to help develop the next generation of low carbon vehicles. The programme, part of the £29 million West Midlands-based Low Carbon Vehicle Technology Project (LCVTP), is an advanced research project which will ensure Britain's leading role in shaping the future of passenger transport.

Another Record Breaking Year for Heason (21/06/2011 16:31:29)

Heason goes from strength to strength reporting record business growth. At the conclusion of the last financial year (year ended April 2011), bookings were up a remarkable 40% with sales revenues and profits also increased similarly. This coupled with recruitment of additional engineering professionals and relocation to new premises provide a "spring board" for the next major development phase allowing Heason to further expand and extend motion engineering solution capabilities throughout Europe.

Thermo Fisher Scientific Presents Innovative Instrumentation at GIFA 2011 for Metal Measurement and Analysis (21/06/2011 16:19:58)

Thermo Fisher Scientific Inc., the world leader in serving science, will showcase its range of detection and measurement instruments at GIFA 2011, the 12th International Foundry Trade Fair, from June 28 – July 2, in Düsseldorf, Germany. It will highlight automation and process solutions that aid workflow production and provide fast and precise results, including the Thermo Scientific automated OES and XRF metals analyzers, the Thermo Scientific RM 200 EM strip thickness gauge and the Thermo Scientific RadEye range, which provides radiation measurement and protection for industrial applications. For more information, visit the Thermo Scientific booth G41, Hall 12 during GIFA 2011.

Farnell expands its range of sealed Ethernet and USB connectors with addition of IP67 products (21/06/2011 15:50:28)

Farnell has enhanced its Multicomp range of interconnect products with the addition of new sealed Ethernet and USB connectors.

Excavation and Demolition Arisings: Waste or Resource? (21/06/2011 15:46:41)

It would seem simple. Some construction sites have an excess of material, others have insufficient. So why can't they simply exchange these materials? It would be the most sustainable option; avoiding landfill and potentially, unnecessary quarrying of primary aggregates. The Environment Agency and numerous NGO's actively promote such approaches, and there are a number of mechanisms by which the exchange of surplus materials can take place. But the practice is not as widespread as it should be, largely due to a number of pitfalls surrounding these activities.

Finance enables telent's customers to accelerate their investments in technology (21/06/2011 15:40:04)

At a time when Capital Budgets are often constrained, both in the Public and Private sectors, telent has recognised that flexible and innovative financing solutions can help its customers 'spend to save', investing in the technology that they need to operate at optimal efficiency.

FDT Technology Recognized as ANSI/ISA Standards (21/06/2011 14:55:40)

The International Society of Automation (ISA) and FDT Group jointly announce that the American National Standards Institute (ANSI) formally approved Field Device Tools (FDT) Technology standards—as previously adopted internationally as IEC 62453 and approved in the United States by the ISA103 Field Device Tools Interface (FDT) committee. These US standards will now be designated as ANSI/ISA standards.

Souriau has extended RoHS Zinc Nickel protection to its latest range of miniature circular connectors, the micro38999 series. (21/06/2011 14:30:27)

This gives the range three key advantages: record compactnesson the market of connections for harsh environments (-50% of compactness as compared with size 9), specifications in line with a military standard and environmentallyfriendly RoHS protection.

Flexilase: A high resolution material, flexible and laserable (21/06/2011 14:20:50)

Latest innovation from Gravograph, this new engraving material gives incomparable results. Just 0.25mm (0.01 in.) thick, Flexilase is ultra-flexible and the ideal solution for all your internal engraving needs on curved surfaces.

UMC3000: 100% Stainless Steel Ultrasonic Sensor - Washdown-immune sensor meets IP68/69K requirements (21/06/2011 14:12:09)

the new UMC3000 raises ultrasonic sensor performance in harsh environments to a whole new level. The units seemless, 100% stainless steel housing and chemically resistant cable system enable ultrasonic monitoring and control in areas previously considered impossible to solve.

Sandvik Coromant UK invests in the future with Technician Apprentice and Graduate Trainee Schemes (21/06/2011 12:53:24)

Offering grounded knowledge and skills training to new talents in the engineering and manufacturing industry - Sandvik Coromant in partnership with the EEF Apprentice and Skills Technology Centre, Birmingham, launches a technician apprentice training program at the same time as introducing a graduate trainee program. Both initiatives are aimed at attracting people keen to pursue a career in UK manufacturing.

Internet lease line prices fall to all time low - New from Norango: a blistering quick, cost-effective solution for businesses of all sizes to access the internet. (21/06/2011 12:46:21)

Norango the UK based telephone answering service and hosted telephony provider are proud to announce the launch of their new EFM service to their valued client base. EFM stands for Ethernet in the First Mile and is a new technology available to deliver a high speed, reliable internet connection to your business at a fraction of the cost of a traditional leased line.

andersDX launches the World’s first nettop computer featuring the NVIDIA® Tegra™ 2 processor (21/06/2011 12:38:26)

New 'Trim Slice' enclosed industrial PC is tiny in size , ultra-low in power but high on performance making it ideal for multiple applications - Following the recently announced joint venture with CompuLab, andersDX, market leader in User Interface technologies and enablers, including embedded computing , has announced 'Trim Slice' – the first Industrial grade NVIDIA® TegraTM 2-based nettop computer, and the company's smallest and most energy efficient boxed computer yet.

Tixeo brings presence and ad-hoc meetings to WorkSpace3D 4.0 (21/06/2011 12:10:26)

Tixeo announces WorkSpace3D 4.0, which is a major milestone in its long-term strategy of delivering an alternative unified communication solution to products such as Microsoft Lync, Skype... By integrating both presence & ad-hoc meetings feature, WorkSpace3D makes collaboration over video conference easier and more efficient.

Seal of approval for Future Advanced Manufacture (21/06/2011 11:59:00)

Future Advanced Manufacture Ltd, the largest UK user of Vero's VISI CAD/CAM system has successfully used VISI to produce complex acrylic tool for a turbine blade sealing device for one of the world's leading aerospace suppliers. Although the compnay has been using VISI machining (three, four and five axis) for many years, the recent project required strong CAD tools and support from Vero.

Zytronic PCT-based touch sensors go al fresco - Enduring robustness of ZYBRID proves to be winning factor for new kiosk systems (21/06/2011 11:48:27)

Zytronic has again demonstrated the value proposition of its highly durable touch sensors and the proprietary Projected Capacitive Technology (PCT™) utilised. Working in conjunction with Czech distribution channel partner Elatec, the company has just secured a major design win with Prague-based kiosk producer Power Products.

Rittal announce new SE 8 Series of Free Standing Enclosures (21/06/2011 11:41:35)

Rittal's new SE 8 free-standing enclosure system is replacing the popular ES 5000 series. The SE 8 offers an ideal platform for your application and will ensure maximum availability, whether in building installation, mechanical and plant engineering or process technology.

StarChip® Introduces Its SCM Family of SIM Controllers Addressing the M2M Markets (21/06/2011 11:29:11)

Secure SIM controllers offer a powerful combination of flexibility and extended performance with large data retention and best-in-class endurance cycles.

Crydom Announces the LifePlus Series of Pluggable AC & DC Output All Solid State Relays (21/06/2011 11:02:37)

Crydom's World Class Solid State Relay Technology is now available to Electromechanical Relay users in the industry standard 12 x 29 mm plug-in package with ratings of either 3 or 5 amps up to 280 VAC or 80 VDC.

Perry Triton® XLX Systems Selected by Subsea 7 (21/06/2011 10:53:02)

Forum Energy Technologies (FET) announced today the sale of two of its high performance Perry Triton® XLX ROV systems to global seabed-to-surface engineering, construction and services company, Subsea 7. The systems will be mobilized on-board the Grant Candies construction vessel at the end of June, in support of a three-year Life–of-Field contract.

Advance Adfinity X20R REV Automatic Floor Scrubber Receives Outstanding Feedback and Continued Support From Cornell University (21/06/2011 10:42:53)

Audience members witness Advance's innovative floor cleaning technology development, confirming unprecedented scrubbing performance of Adfinity X20R REV.

SR Microscope Stages are More Stable with Capacitive Feedback (21/06/2011 10:20:06)

PI (Physik Instrumente) LP has added two higher-performance models to its successful PInano™ superresolution (SR) microscope stage series.

Sticklers® Fibre Optic Cleaners Hails Exhibition a Success (21/06/2011 09:41:20)

'Steam, the Museum of the Great Western Railway', which houses technology and engineering of a by-gone era, was transported into the modern day when the Fibre Optics in Harsh Environments Conference (FOHEC) took place allowing state-of-the-art companies like Sticklers® Fibre Optic Cleaning Products to introduce the latest technology in fibre optic cleaning.

FIRE-LITE ALARMS SYSTEMS PROTECT MILES COLLEGE - Protection 1 Brings Campus Buildings Up to Code, Going Hi-Tech with IP (21/06/2011 09:18:08)

Fire-Lite Alarms by Honeywell announces the fire protection systems on the Miles College campus in Fairfield, Ala., have been updated by fire alarm and security integrator Protection 1 using Fire-Lite Alarms' MS-9600UDLS addressable fire alarm systems. Utilizing an existing IP network for fire alarm reporting to Protection 1's central station, the school was able to boost the reliability and response time of fire alarm communications while eliminating the cost of two phones lines per system.

Exlar PRS-PRR Series Planetary Roller Screws Provide High-Load Capabilities and Efficient, High-Speed Performance (20/06/2011 16:50:28)

Exlar's component planetary roller screw line has been expanded to include two performance capacities, available in PRS and PRR models. The PRS models, with G5 lead accuracy, are available in screw diameters ranging from 8- to 80-mm, and deliver static load ratings up to 218,000-lbf. Exlar's PRR models, with G9 lead accuracy, are available in screw diameters of 12- to 27-mm and offer static loads up to 18,000-lbf.

National Semiconductor Introduces Industry’s First 100V Half-bridge Gate Driver for Enhancement-mode Gallium-Nitride Power FETs (20/06/2011 15:35:16)

Highly-integrated Half-bridge Gate Driver Boosts Power Density and Efficiency in High-voltage Applications - National Semiconductor Corp. have introduced the industry's first 100V half-bridge gate driver optimized for use with enhancement-mode Gallium-Nitride (GaN) power field-effect transistors (FETs) in high-voltage power converters. National's new LM5113 is a highly-integrated, high-side and low-side GaN FET driver that reduces component count by 75 percent and shrinks printed circuit board (PCB) area by up to 85 percent compared to discrete driver designs.

ANOTHER SINGLE WHEEL LIFT FOR CARMARTHENSHIRE TYRE SERVICES (20/06/2011 14:08:04)

Carmarthenshire Tyre Services has installed another Single Wheel Lift from Penny Hydraulics on its latest service vehicle to enable its fitters and engineers to carry out their work without any manual handling or lifting. This is the fifth vehicle operated by the tyre service specialist to be fitted with the handling device. The manufacturer also provides a range of support and maintenance services to ensure legal compliance and operational reliability for the equipment it has supplied.

FIRST ALL-ELECTRIC TUBE BENDER FOR LEADING EUROPEAN TUBE BENDING SPECIALIST (20/06/2011 12:17:44)

Unison has received an order for an all-electric tube bending machine from Van Rijsoort, the Netherlands-based tube bending specialists. The order follows an extensive investigation of tube bending technology by Van Rijsoort, during which the company joined a Unison Technology Tour and visited some of Unison's customers to gain an insight into how they are using all-electric tube bending techniques to reduce scrap, improve productivity and conserve energy.

Marine Simulation LLC announced today the release of ROVsim2 O&G and ROVsim2 Pro - their new family of next generation undersea robotics training simulator systems. (20/06/2011 12:01:49)

Marine Simulation LLC announced today the release of ROVsim2 O&G and ROVsim2 Pro - their new family of next generation undersea robotics training simulator systems. ROVsim2 reflects an important step in the development of 3D simulation and integrates a number of important new features and enhancements, including:

Elscint Vibratory Bowl Feeders for feeding steel bush in two rows with escapement (20/06/2011 11:57:03)

Elscint Automation, the leading vibratory bowl feeder manufacturer (having CE Marking for its parts feeders) from India has recently manufactured a vibratory Bowl Feeder for feeding of bushes in two outlets.

LARGEST MACHINING CENTRE FROM HERMLE (20/06/2011 11:46:39)

German machine tool manufacturer, Hermle, has added a new model, the C 60 U, to the upper end of its range of vertical-spindle, 5-axis machining centres. Availability in the UK is through sole agent, Geo Kingsbury Machine Tools, Gosport.

New 4-7W Medical Wall Mount Adapters Available with Convenient USB Charger (20/06/2011 11:39:48)

Tumbler Technologies + TRUMPower launches its new TMW7 series of medical wall mount adapters which are available with a USB socket on the case or an output cable with a DC plug.

Mercury instrument hire helps protect oil rig safety (20/06/2011 11:18:34)

Portable mercury monitors hired from instrumentation specialist Ashtead Technology have enabled the rapid assessment of working conditions for safety specialists undertaking vital maintenance checks on oil rigs in the North Sea.

Real-time Monitoring - through swell and high water (20/06/2011 11:10:58)

Estuaries on the west coast of Wales represent some of the most challenging conditions for environmental monitoring. However, staff from monitoring solutions company YSI Hydrodata and Environment Agency specialists have combined to develop a solar powered water quality monitoring pontoon which is providing 24/7 data that previously would have been an impossible dream.

ESAB LAUNCHES NEW COMBIREX DX MODULAR CUTTING SYSTEM (20/06/2011 11:04:46)

ESAB Cutting Systems has introduced the Combirex DX Shape Cutting Machine for plasma and oxy-fuel cutting. It is based on ESAB's new global platform for cutting machines and is built from off-the-shelf pre-assembled modules. This means reduced assembly times and customers will be able to order customised machines, within a fixed number of configurations, that can be delivered in a short period of time.

WIRELESS LOCKS – ACCESS CONTROL FROM EMKA (20/06/2011 10:58:44)

The EMKA Agent E range represents a new approach to the electronic lock solution for cabinet security comprising a unitary electronic release swing handle with battery power – so simplifying installation while enabling either individual radio key unlocking or central operation. This radio-controlled swing handle program does not need hard wiring and may be installed on individual cabinets or large applications with many suites of cabinets.

Igus Video of the Week – TwisterBand machine tools (20/06/2011 10:55:35)

Machine tool applications require a number of different services including electric, oil and pneumatics in order to run. These services run through various cables or hoses that require protection and guidance to avoid damage and subsequent machine failure. This is straightforward when the cables run in a linear motion. Some machines, however, have rotary motions that render typical linear cable carrying systems insufficient

Motors Regulation 640/2009 comes into effect – low efficiency motors banned from 16 June 2011 – ‘significant moment for industry’ says REMA (20/06/2011 10:47:31)

From 16 June 2011 it is no longer legal to place low efficiency motors on the European market. Regulation 640/2009 of the EcoDesign Directive has now come into effect and any motor with an efficiency rating less that IE2 can no longer be placed on the market. Specifically, the Regulations apply to LV motors of type S1 and S3 between the sizes 750W and 375kW.

NEW 300A AND 400A INDUSTRIAL MIG WELDERS FROM WELDABILITY-SIF (20/06/2011 10:42:09)

The MIG300E and MIG400E Powerstep are two new industrial 3-phase 415V DC MIG welding machines from Weldability-SIF, the UK based supplier of MIG, TIG, MMA, Spot and Oxy/Fuel welding and Plasma cutting machines, torches, accessories, consumables and personal protective equipment, designed for heavy duty industrial fabrication applications and both featuring removable modular wire feed units from the main power source for welding at distances up to 9m.

Technical Expertise Combined to Bring Advanced Factory Cranes to UAE (20/06/2011 10:37:00)

Advanced specification factory cranes will now be available in the UAE following an agreement between Dubai Cranes LLC and Street Crane Company of the UK. Under the agreement Dubai Crane will carry in-depth stock of crane kits from Street Crane, allowing express delivery to local manufacturers and industrial investors in the UAE.

NEW LOW-COST IP65 POLYAMIDE ¼ TURN LOCK FROM FDB - OFFERS WATERTIGHT PRICE AND PERFORMANCE (20/06/2011 10:27:26)

An elegant low profile IP65 lock in tough polyamide with a variety of inserts and cams available is just ideal for so many common applications, especially when it combines performance and looks at an exceptionally low price. Such an item is the new ¼ turn 1-092 from FDB Panel Fittings which is assembled in seconds without the use of tools. Applications are expected to include electrical and electronic cabinets, as well as personal storage and access, especially for those types of equipment security where the environment is wet and otherwise stainless steel would probably be specified.

SOFTSTART UK HAMMERS STARTER COSTS FOR EdF (20/06/2011 10:22:15)

When EdF (Cottam Power) needed a starter for the MV drive fitted to a hammer mill at its Nottingham site, most suppliers claimed that only a costly variable speed drive would be suitable. Softstart UK, however, with its wide experience of similarly demanding applications, was confident in offering instead a much more cost-effective MV soft starter. This has proved entirely satisfactory in service, and its adoption has allowed EdF to make substantial savings on the overall budget for the project.

New DC Motor Controller has built sensing to support software-based control loops - Also provides over-current, over-voltage and over-temperature protection. (20/06/2011 10:10:54)

Phidgets Inc. released today the 1065 – PhidgetMotorControl 1-Motor that lets you control the direction, velocity and acceleration of one DC Motor. The motor is powered by an external power supply (9 to 28VDC).

SIMPOE redefines plastic parts design with SimpoeXplorer for creo. (20/06/2011 10:00:25)

SIMPOE announces the introduction of SimpoeXplorer for PTC, as well as a complete repackaging of its plastic injection simulation product line.

ARCAD, INC. introduceds the new DC Arc Flash Analytic software program. (20/06/2011 09:40:02)

ARCAD, INC. has introduced the new DC Arc Flash Analytic (DCAFA V1.0) software program for arc flash and shock hazard analysis in DC power systems including but not limited to photovoltaics, battery banks, rectifiers and telecommunications equipment.

Howard Leight QuietDose In-Ear Dosimetry Recognised (20/06/2011 09:31:34)

The British Safety Industry Federation (BSIF) has awarded its 2011 Product Innovation Award to the Howard Leight® QuietDose™ in-ear dosimeter. The award, which is designed to recognise new and innovative products that contribute to improvements in occupational safety and health, was presented at the RoSPA Occupational Health and Safety Awards Gala Dinner held during Safety and Health Expo 2011.

Latest MapleSim release opens new avenues for model development (16/06/2011 16:10:22)

With over 150 new components, Maplesoft™ (Waterloo, Canada) has released the latest version of MapleSim™, the high-performance physical modelling and simulation software. Available from Adept Scientific (Letchworth, Herts), MapleSim 5, has a broader application scope, streamlined modelling environment and ability to efficiently simulate even more systems, making it easier to tackle large projects and get results quickly

Substantial savings to be made with revolutionary bearings (16/06/2011 15:58:12)

Phil Burge, Communication Manager for SKF, explores the options of motor replacement and repair looking in detail at the latest bearing technology that is enabling considerable energy savings to be realised.

R58B Series Registration Mark Sensor Reduces Complexity and Increases Speed of TEACH Process (16/06/2011 15:49:20)

Banner Engineering Corp. introduces the new R58B Series Expert Registration Mark Sensor, the latest addition to the company's line of registration mark sensors. The R58B provides the same high-performance detection and outstanding color contrast sensitivity of the R58E, in addition to a simplified teach process. TEACH is performed quickly via a single-click on the TEACH push-button on the sensor or via remote input. TEACH allows the sensor to "learn" the light and dark sensing conditions, based on user inputs, and then can automatically adjust the sensitivity to place the operating threshold midway between threshold for the light and dark condition. By reducing the complexity and increasing the speed of teaching the mark and the background, the R58B reduces operator training and product change over time.

Ex RF 95: Radio Position Switch for Ex Zone 21 without cable and battery (16/06/2011 14:29:11)

Totally independent from external power supply the design engineer can apply the wireless position switch Ex RF 95. And the user does not have to care about the loading condition of a battery, since there is a miniaturized electrodynamic energy generator in the switch insert of the Ex RF 95, which generates exactly that energy quantity necessary for the transmission of a radio signal.

SILENT KNIGHT DEVELOPES HIGH-CAPACITY FIRE FIGHTER TELEPHONE SYSTEM - Farenhyt Fire Fighter Telephone System One of Industry's Largest (16/06/2011 13:44:13)

Silent Knight by Honeywell has expanded its portfolio of Farenhyt fire alarm systems with the release of a new high-capacity fire fighter telephone system. Capable of supporting up to 72 telephone connections with as many as 10 phones in use at one time makes the IFP-FFT one of the industry's largest-capacity fire fighter communications systems.

Renewed Larox Flowsys to Conquer the Global Valve and Pump Markets (16/06/2011 12:56:24)

Larox Flowsys, the worldwide supplier of flow control and pumping solutions has decided to change its name to Flowrox. The visual look and feel has also been renewed. The new name and outlook will be taken into use gradually by January 1st, 2012.

KEMET Introduces High Voltage Ceramic Capacitors for the Automotive Industry (16/06/2011 12:50:43)

KEMET has announced the introduction of its new Automotive Grade High Voltage Multilayer Ceramic Capacitors. Qualified to the Automotive Electronics Council's AEC-Q200 standard, these surface mount capacitors are available in X7R and C0G dielectrics from 500VDC to 3000VDC and with capacitance values ranging from 10pF to 0.27µF.

Parker’s launches new smaller frameless torque motors for maximum reliability (16/06/2011 12:46:15)

Parker Hannifin, the global leader in motion control technologies, has broadened its range of frameless torque motors with the introduction of its new TK130 models. Building on the features of the existing TK range, the new, smaller models offer simplified mechanical design, precise motion and high dynamic performance, all in an extremely robust package.

New component of Wonderware System Platform synchronises human and system activity across business and production applications to drive operational excellence (16/06/2011 12:36:59)

Cheadle based Wonderware, distributed in the UK by SolutionsPT, has announced the immediate availability of its new ArchestrA® Workflow software, a component of Wonderware's System Platform. This element further extends the integrated application capabilities of the Wonderware System Platform with the addition of Business Process Management (BPM) technology.

E-T-A introduces compact, high-capacity DC disconnect switch (16/06/2011 12:30:28)

E-T-A Circuit Breakers, quality designer and manufacturer of a broad range of electro-mechanical and electronic products for circuit protection, has introduced a new high-capacity DC disconnect switch providing physical isolation for up to 1500V DC in a very compact design.

VITON® EXTREME™ SEALS OFFER (16/06/2011 12:18:52)

Dichtomatik Ltd, the sealing specialists, can now offer Viton® fluoroelastomer sealing products that have been subject to DuPont™ proprietary Advanced Polymer Architecture (APA) technology. These products, called Viton® Extreme™, feature base-resistant polymers to ensure improved long term performance in the presence of high pH chemicals.

SAFETY SYSTEMS TECHNOLOGY LAUNCHES GUARDING SERVICE TO PROTECT COMPANIES FROM BEING CAUGHT OUT BY LAW CHANGES (16/06/2011 10:01:10)

Motivated by significant changes to the Machinery Directive Safety Systems Technology has set up a bespoke service to design, manufacture and install machinery guarding, ensuring that machine manufacturers and users are compliant with the changes that have recently come into force.

New Molex Squib Connector Delivers Unsurpassed Resistance to Handling Issues - Ergonomic right angle second generation Squib AK-2 connector for a fully reliable connection. (16/06/2011 09:56:10)

Molex Incorporated introduces the Squib Right-Angle AK-2 Cable Assemblies designed for fail-safe connections in automotive safety-restraint systems. In addition to automotive applications, the Squib Right-Angle AK-2 is perfectly suited to agricultural equipment, (All Terrain Vehicles) ATVs and aircraft.

New Driver Enables Communication Between Red Lion Products and Omron STI Safety Controllers (16/06/2011 09:46:23)

Red Lion Controls Inc. announces the addition of a communications driver supporting the Omron STI G9SP safety controller. This new driver allows the company's popular G3 Series HMIs, Data Station Plus and Modular Controller Series to monitor and control one or more Omron STI G9SPs. In addition, these Red Lion products add advanced protocol conversion, data logging, and web-based remote access to applications using Omron STI's newest safety controller.

DAVID CAMERON SEES WORLD-BEATING POLISHING TECHNOLOGY (16/06/2011 09:41:29)

On a recent visit to OpTIC Glynd&#373;r in St Asaph, North Wales, Prime Minister David Cameron was particularly interested to see one of the world's largest and most advanced polishing machines in action. Designed and manufactured by British company, Zeeko, it was producing mirror segments for what will be the biggest ever optical telescope, the European extra-large telescope (E-ELT).

ISaGRAF, the leading automation software technology partner has released ISaGRAF version 6.0.2. ISaGRAF is the industry-leading IEC 61131-3 and IEC 61499 compliant firmware and workbench for building industrial automation products. (16/06/2011 09:27:15)

ISaGRAF 6.0.2 includes User Interface localization in 8 languages: English, French, German, Italian, Japanese, Spanish, Simplified Chinese and Traditional Chinese. Languages can be installed separately as needed and changed dynamically. Version 6.0.2 also includes added functionalities such as:

Versatile Modular Power Connector System From Lane Electronics Handles Up to 100A (16/06/2011 07:55:57)

Lane Electronics, one of the UK's leading suppliers of electrical and electronic connector products, has made available the Positronic Scorpion Series of power connectors. Lane Electronics was appointed as a franchised distributor for Positronic earlier this year.

SL Power - Very wide range of Energy Level V and EN60601 3rd Edition External Power Supplies (16/06/2011 07:50:12)

With the launch of no less than 154 new standard models in its CENB commercial ranges and MENB medical ranges of power supplies, SL Power Electronics has introduced what it says is the widest range of external power supplies currently available from a single manufacturer.

Exlar K Series Linear Actuators Deliver Ultimate Flexibility for Superior Performance (15/06/2011 16:47:06)

Exlar's linear actuator line has been expanded to include the new K Series Universal rod style linear actuators. The K Series allows for options to mount any type of motor. This actuator series is also available with multiple grades of planetary roller screws and an option for an ACME screw, permitting operators to choose the configuration best suited for a specific application while remaining within budget.

Fluke extends its high-performance range of Thermal Imagers (15/06/2011 16:19:33)

Fluke, the global leader in portable electronic test and measurement technology, has introduced four new high-performance thermal imagers, the Fluke Ti27 and Ti29 for industrial, electrical and process control applications, and the Fluke TiR27 and TiR29 for building inspection, energy audit and building maintenance applications. In addition to the Fluke Ti32 and TiR32 they make up the affordable Fluke P3 Series, all models being specifically designed to work in the harshest environments and provide superior image quality with one-handed, easy-to-use operation. Affordable, field-installable, optional telephoto and wide-angle lenses are available to bring distant and wide views into sharp focus.

CHANGING TIDE OF PARENTAL OPINION HIGHLIGHTS GROWING SUPPORT FOR VOCATIONAL TRAINING (15/06/2011 16:16:22)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), welcomes research ahead of VQ Day that shows a change of heart in the way parents view vocational training. As the UK's economy continues on its fragile journey to recovery, Ann Watson says the statistics are encouraging and show a "much needed vote of confidence" for vocational training.

Altair’s PBS Professional Celebrates 20th Anniversary, Exhibits at International Supercomputing Conference June 19-23 in Hamburg, Germany -PBS Professional commemorates 20 years of optimizing HPC resources (15/06/2011 16:09:51)

Altair Engineering, Inc., a leading global provider of simulation and advanced computing software solutions, announced today that PBS Professional, Altair's EAL3+ security certified commercial-grade high-performance computing (HPC) workload management solution, is celebrating its 20th anniversary on June 17. During the month of June, the company also will exhibit at the International Supercomputing Conference (ISC) in Hamburg, Germany June 19-23, and launch its PBS Professional version 11.1 update.

Green Hills Software and Clarinox sign agreement to jointly support wireless-enabled embedded systems - Agreement includes Bluetooth, Wi-Fi and RFID Protocols (15/06/2011 16:02:48)

Green Hills Software, the largest independent vendor of embedded software solutions, has signed an agreement with Clarinox Technologies, a provider of embedded wireless solutions, to promote both companies' joint offerings. The Clarinox application suites and drivers for short-range wireless protocols – including Bluetooth, Wi-Fi and RFID – will be integrated with Green Hills Software's INTEGRITY® real-time operating system (RTOS) and the MULTI® development toolchain to deliver comprehensive application support for developers of embedded systems that utilise short-range wireless protocols.

FREE 84-PAGE CATALOGUE DESCRIBES SOLID WIRES FOR WELDING (15/06/2011 14:42:23)

ESAB is offering free copies of its latest 84-page Solid Wires catalogue that lists hundreds of wires for Mig, Tig and submerged arc welding (SAW), plus appropriate fluxes. In addition to a wealth of technical data for each grade of wire and flux, the catalogue includes handling and storage guidance, health and safety information, details about packaging options, and typical welding data and joint preparation recommendations.

David Dossett awarded MBE in Queen’s Birthday Honours (15/06/2011 13:22:45)

David Dossett was awarded an MBE this week for services to the Electrical Manufacturing Industry. A key industry figure for 25 years, David led the successful campaign against the harmonisation of plugs and socket outlets in Europe and coordinated the BEAMA worldwide campaign against the counterfeiting of electrical equipment. Under the various projects around the world over 12 million counterfeit products have been seized and destroyed, leading to significant health and safety benefits in the UK and worldwide.

Overall reaction to Government targets positive, but trade body would like to see specific measures focussed on energy saving technology - Dr Graeme Philp, the chief executive of the trade body GAMBICA, has responded to the Government’s carbon budge (15/06/2011 13:14:09)

GAMBICA is the UK-based organisation which represents the instrumentation, control, automation and laboratory technology industries. Dr Philp argues that, while carbon reduction is a clear and present need, Government needs to address it in such a way that business in the UK remains on an equal footing with the rest of Europe. He believes that putting energy saving technology in the spotlight will help achieve this.

WEAR PROTECTION UNDERWRITES CONTINUITY OF PRODUCTION & SUPPLY, DELIVERING OPTIMUM ROI IN DEMANDING ANIMAL FEED MARKET (15/06/2011 12:32:37)

The global demand for animal feeds has never been higher, fuelled by increasing heavy consumption of meat in China and wealthy countries in the ASEAN block. This demand means that continuity of supply is all important placing stress all along the supply chain, from processing and transferring of raw materials and finished product in animal feed plants, to handling, conveying and storing the product at ports for onward shipping.

Auto Identification Camera Simplifies Product Verification And Traceability (15/06/2011 09:41:41)

The BOA IDR auto identification camera, now available from STEMMER IMAGING, is a fully integrated smart camera with ID software that allows comprehensive checking of product markings. By combining 1D barcode, 2D matrix and character reading and verification with pattern recognition capabilities in a single unit, BOA IDR provides part traceability and error proofing. Barcodes, 'best before' dates, lot numbers and even logos and other product features can also be checked and verified.

Robust Boiler Temperature Probe with Integral Connector (15/06/2011 09:34:34)

Measurement Specialties, Inc. has now released its OEM temperature probe for hot water boiler applications, the Boiler Probe with Integrated Connector. This probe contains a NTC thermistor soldered to an industry standard 2.5mm connector. It features a fast time response and an operating temperature range from -40°C to +125°C. The durable brass housing provides the popular British Standard Pipe Fitting – (1/8 BSPF) for ease of installation and replacement. Optional threads are available for custom designs.

Endress+Hauser Opens Temperature Instrumentation Manufacturing Plant in U.S. - The new plant will help Endress+Hauser meet the 40% increase in demand for its temperature instrumentation in North America. (15/06/2011 09:29:19)

Endress+Hauser officially opened a new Temperature production facility in Greenwood, Indiana, today. The 12,000 sq ft manufacturing plant will build temperature sensors, thermowells, transmitters, recorders, flow computers, safety barriers, displays and other instrumentation to meet the increasing demand for Endress+Hauser instrumentation in North America and South America.

Meggitt creates a Vibro-Meter® velocity sensor for machine protection and condition monitoring systems (15/06/2011 09:23:12)

Meggitt, a leading supplier of complete protection and condition monitoring systems for power generation and industrial applications, has boosted its Vibro-Meter product line with a velocity sensor that works with all condition and health monitoring systems including Meggitt's own VibroSight™. Meggitt is the only system supplier with design and manufacturing control over its entire system, which now includes the new PV 102, a piezoelectric velocity sensor for vibration monitoring of turbomachinery and other rotating equipment.

Harland Simon IP54 Wall Mounted Panels for UPS (15/06/2011 09:09:35)

Harland Simon UPS Ltd has designed a range of IP54 Wall Mounted Panels which are suitable for use with AC UPS's from 700VA – 3KVA. The IP54 protection enables the AC UPS to be used in harsh environments.

Sherborne Sensors Launches A320 Ultra-Low Range Linear Servo Accelerometer - Gravity referenced, closed loop accelerometer upholds optimum reliability across applications (14/06/2011 14:53:01)

Sherborne Sensors, a global leader in the design and manufacture of sensors for military, aerospace and industrial applications, announces the A320 series of ultra&#8208;low range linear servo accelerometers. Designed to deliver exceptional durability and robustness, the A320 series spans a wide range of industrial and military applications – from geophysical, seismic and civil engineering studies, to flight test monitoring and low acceleration analysis.

Change of Guards at FINAT - Newly appointed president Kurt Walker shares his vision on FINAT’s strategy today and tomorrow (14/06/2011 14:47:35)

FINAT, the world-wide association representing the interest of the self-adhesive labelling industry, announces that Kurt Walker has been appointed new president for FINAT at their annual congress in Sicily this year. Kurt Walker takes over the presidency from Andrea Vimercati to steer FINAT for the next two years. Mr Walker (°1950), currently CEO at tesa Bandfix Switzerland, became a member of the FINAT board in 1999. Until now he took up his responsibility as FINAT Vice-President and Membership Committee Member. Prior to that he was also the association's Treasurer.

NVision Now Offering Product Defect Analysis (14/06/2011 14:42:45)

NVision, Inc.'s Engineering Service Division is now offering product defect analysis, which can potentially be introduced in product liability litigation to prove a manufacturer innocent of producing a defective or harmful product. The company has partnered with Materials Analysis, a Dallas-based engineering firm specializing in litigation support, to provide this service.

WHAT IS CLEANING IN PLACE? HOW DOES IT WORK, AND WHERE SHOULD YOU USE IT?... (14/06/2011 14:35:49)

....a basic primer from Burkert answers these & many more questions. Cleaning in Place (CIP) has been around for approximately 50 years, and is commonly used in hygiene critical industries, such Food, Beverage and Pharmaceutical, to clean a wide range of plant. CIP refers to the use of a mix of chemicals, heat and water to clean machinery, vessels or pipe work without dismantling plant. The process can be one shot, where everything goes to drain, or recovery, which recycles most of the liquid. Overall, CIP can be a very efficient way of cleaning.

CGTech to feature VERICUT CNC Machine Simulation at Offshore Europe 2011 (14/06/2011 14:16:21)

CGTech will feature the latest release of VERICUT CNC machine simulation and optimisation software on stand 3E81 at Offshore Europe 2011 in Aberdeen, Scotland on September 6-8.. VERICUT is used extensively by manufacturing companies in the Oil and Gas and Sub Sea equipment markets in order to increase the efficiency of CNC machining operations and to eliminate the risk of expensive machine and component collisions.

Green Hills Software joins GENIVI Alliance (14/06/2011 14:08:21)

Cross-industry leading expert adds proficiency and software for developing safe and secure vehicle electronics Green Hills Software, the largest independent vendor of embedded software solutions, today announced it has formally joined the GENIVI Alliance as an Associate Member. The GENIVI Alliance is an automotive and consumer electronics industry association driving the development and adoption of an open In-Vehicle Infotainment (IVI) reference platform.

Thermatel® TD1/TD2 switches for high level alarm in natural gas filters (14/06/2011 13:59:33)

Thermatel TD1/TD2 switches are based on thermal dispersion technology. The devices can easily be adjusted to detect flow (gases and liquids), level or liquid-liquid interface. With continuous diagnostics, automatic temperature compensation, narrow hysteresis and fast response time the Thermatel TD1/TD2 switches provide a new level of performance and reliability not found in previous switches.

Nimo-KG in new cooperation with Norway’s largest meat producer (14/06/2011 13:54:31)

The first machine was delivered in mid 2010 – and now the cooperation continues. Nimo-KG gained renewed trust when Nortura, Norway's leading meat and egg producer, decided to take the next step in upgrading their Forus production line just outside Stavanger.

Camera choice is key to thermography success (14/06/2011 12:55:22)

In recent years an enormous range of infrared cameras have come on to the market, but Alan Hasson from instrumentation specialist Ashtead Technology believes that this is a two-edged sword. Whilst technological developments have resulted in extremely sensitive cameras with enormous capability, choosing a camera can be a complicated process and too often the choice is simply dictated by price and budget, he says.

GOING PLACES WITH POWER STEERING (14/06/2011 12:30:18)

EPS for larger vehicles: integrating components and improving performance. Thanks to its packaging advantages and rising power density, the EPS column is being used for larger and larger vehicles. The highest-performance C-EPS on the European market has an output of 8.5 kN and is used in models including the Renault Mégane Scenic.

Motorists vote in favour of payment by distance driven - British public identify solution to electric car conundrum (14/06/2011 12:27:16)

Burson-Marsteller UK (B-M UK) and its sister agency, Penn, Schoen and Berland (PSB), today launched a transport study which found that six out ten people would be favourable to a Pay-As-You-Drive (PAYD) system of charging motorists. The survey also shows the general public believe that the electric car will be key to solving future transport challenges. The survey which questioned both consumers and transport experts revealed an overwhelming 64 percent of consumers said they would support a PAYD replacement system, where drivers could pay for their road use depending on which roads they use, and when they use them, so long as this was a replacement for fuel duty rather than an additional charge. Transport experts however believed that the implementation of Pay-As-You-Drive was a political impossibility as no government would risk upsetting the public with what is perceived to be an unpopular measure. Transport experts also warned that the advent of the electric car could potential

Analyser performs vital role in Hydrogen fuel project (14/06/2011 11:29:32)

A highly-advanced Process Hydrogen Analyser from instrumentation specialist Quantitech is performing critical safety analysis in the UK's largest ever cross sector hydrogen vehicle refuelling trial. The trials are being managed by Sheffield based energy storage and clean fuel company ITM Power, which has deployed an H2scan HyOptima 720 analyser as they undertake trials of the company's Transportable Hydrogen Refuelling Station (HFuel); a self-contained module suitable for refuelling hydrogen-powered road vehicles and forklift trucks.

A better alternative to ‘old style’ cable glands (14/06/2011 11:02:56)

CEE Norm screw terminal plugs and sockets are now available with a unique multi-grip cable gland that adapts effortlessly to a wide range of different cable diameters with affecting the closure efficiency or capacity for strain relief. The plugs and sockets are rated for 16A up to 125A, and the multi-grip gland will accordingly accommodate cable diameters from 8mm up to 30mm.

WIND TURBINE GEAR PRODUCTION ACCELERATED BY CNC REFURBISHMENT OF GEAR SHAPER - linear actuator instead of ‘nodding’ cam enables gear profile changeovers in minutes instead of hours (14/06/2011 10:49:15)

Advanced gear shaping software and motion control hardware from NUM has been used to bring an old manually-controlled gear shaper machine up to modern day control standards. The five-axis Stanko machine is now controlled by a NUM Axium Power CNC system, using electronic gearbox techniques to synchronise the rotary cutter, gear blank and stroking axes. It also incorporates an innovative programmable replacement for the stroking axis, which reduces product changeover time from hours to minutes - significantly improving productivity.

Renishaw to focus on position feedback at Sensors and Systems 2011 (14/06/2011 10:43:43)

Renishaw, a world leading engineering technologies company, will be exhibiting the latest additions to its range of position feedback encoders at the Sensors and Systems exhibition, being held in Farnborough, UK, from 14-15 September 2011.

Fluke introduces a Radiation Survey Meter (14/06/2011 10:38:49)

Fluke, the global leader in portable electronic test and measurement technology, has introduced the easy-to-use, handheld Fluke 481 Radiation Survey Meter which enables users to identify irradiated goods, equipment, surfaces or environments in industrial settings, and thus to help to remediate contamination and safety issues while minimally impacting operations. Areas of application include food processing or packaging screening, transported goods screening, screening of manufactured goods imported from Asia, screening at ports, and use by environmental health, fire and police personnel.

CGTech to Showcase VERICUT 7.1 at EMO 2011 (14/06/2011 10:09:03)

CGTech will feature the latest release of VERICUT CNC machine simulation and optimisation software on stand J10 in Hall 25 at EMO 2011 in Hannover, Germany.

Demystifying the Vocational Sector will be Key (13/06/2011 16:18:16)

Ann Watson, managing director of specialist awarding organisation, EAL (EMTA Awards Limited), cites the lack of unbiased careers advice in many schools as the stumbling block for Britain's lost generation. The Government's head of curriculum review, Tom Oates, called for half of all young people to complete an apprenticeship (03/06) and would like to see equal numbers choosing the apprenticeship route as studying for A-Levels. Watson comments: "While I share Mr Oates vision implicitly, careers advice in schools appears to fall woefully short of the mark so it's little wonder more students choose university. With preference given to academic opportunities, I seriously question what information on apprenticeships is provided."

Catalog Data Solutions CAD Model Search Engine included in PTC Creo™ Design Software – “A Model at Every Click” (13/06/2011 16:07:41)

Catalog Data Solutions Inc. (CDS), a leading provider of online product selection tools for industrial suppliers, today announced the inclusion of 3DModelSpace within PTC Creo™ 1.0. This provides designers with access to hundreds of thousands of downloadable 3D CAD models during their design process and from within their Creo CAD system.

Telegent Expands Mobile TV Market with Internal Antenna and Entertainment Services Platform (13/06/2011 15:56:27)

First analog mobile TV solution to integrate broadcast television with data-delivered entertainment, with internal antenna that streamlines handset design - Telegent Systems, the company that makes television mobile, today introduced its fifth generation TLG12xx family of analog mobile TV receivers along with the industry's first integrated internal antenna and entertainment services platform. These innovations redefine the mobile TV experience by enabling more attractive, easier to use handset designs and by delivering more entertainment options through the integration of broadcast TV with video streaming, mobile content, social networking and games in a common navigation framework. For manufacturers, Telegent's mobile TV platform offers market differentiation in handset design and video quality while delivering the lowest power consumption, footprint and system cost in the market today.

New TG Enclosures from Spelsberg allows for smooth external membrane keypad/overlay integration (13/06/2011 15:13:07)

Spelsberg has launched a new range of enclosures that provide quick, aesthetic protection for electrical applications with a recessed cover to allow for the flush placement of design foils and membrane keyboards. The TG Range adds to Spelsberg's impressive offering of industrial quality enclosures; offering IP67 protection, the polycarbonate enclosures can be fully customised using the company's in-house CNC milling and drilling service.

The Secret to Saving is in the New Generation Trigger Grip™ (13/06/2011 15:00:33)

MicroCare, a world leader of precision cleaning, coating and lubrication has launched the latest generation of the highly popular Trigger Grip™ System, designed to complement the way its solvents are used.

Improved chip control in heavy grooving operations - New Sandvik Coromant innovation offers high metal removal rates in grooves up to 15 mm (13/06/2011 14:50:33)

CoroCut® R size inserts now feature new -GM geometry for greater chip control in heavy grooving operations. Suitable for components that include cam shafts, turbine rings and discs, shafts and rolls, this new innovation from cutting tool and tooling system expert, Sandvik Coromant, offers a special cutting action that forms and narrows the chips to ensure their removal from the groove in the most efficient way.

ISA Joins NAM-Endorsed Manufacturing Skills Certification System, with CCST® and CAP® Certifications (13/06/2011 14:43:59)

The International Society of Automation (ISA) announced today that it is partnering with The Manufacturing Institute to bring automation and control systems certifications to the National Association of Manufacturers

P-80® Recommended for rotary shaft seals (13/06/2011 14:39:21)

P-80® lubricants are unique assembly aids formulated to provide temporary lubrication making rubber easy to install, remove, or manipulate. P-80 lubricants provide a high degree of lubricity when wet, but because they do not contain silicone or other persistent ingredients, once dry the slipping action goes away-making it a perfect lubricant for rotary shaft seals.

Birmingham Invests in Global Talent (13/06/2011 14:34:33)

The University of Birmingham has launched a global search to appoint up to 50 Birmingham Fellows to enhance the University's existing academic strengths and to contribute to a growing culture of collaboration.

ENERGY WORKSHOPS WILL BE MULTI-FACETTED (13/06/2011 14:08:24)

Three energy specialists have come together to run seminars in Livingstone and Newcastle exploring the potential for harnessing the impact of new and pending legislation. Controls specialist Mitsubishi Electric, motor maker Brook Crompton and energy consultants Power Quality Management will host the events on 5 and 7 July respectively. Matt Handley of Mitsubishi explains: "Recent legislative changes are impacting on the use of energy and motors in industry. We will review the situation and look at how current and emerging technologies can reduce costs and achieve a low carbon footprint.

ELESA’S NEW LATCH/HANDLE AND CABINET CONTROL ROD SYSTEM (13/06/2011 13:56:13)

Elesa's new CLT latch/handles particularly suit large standalone or suite style cabinets with single point closure – or in conjunction with the CAR rod controls for 2 or 3 point locking. This spreads the gasket pull-down loads across the door so ensuring optimal sealing and security on control cabinets and electronic racks. The CLT latch/handle itself is sealable to IP65 and so is suited to most commercial/industrial cabinet applications.

NEW RANGE OF MEMS TRIAXIAL ANALOGUE ACCELEROMETERS. (13/06/2011 13:47:53)

ETLG Inertial Aerosystems are introducing a new range of high performance triaxial analogue accelerometer modules. Manufactured by Silicon Designs Inc, Model 2445 is a drop in replacement for Model 2440 and can measure full scale acceleration in 3 orthogonal axies from +/-2g to +/-200g. By utilising advanced MEMS technology, operating temperature has been extended from -55 to 125 degrees C, ideal for hostile environments.

Turnkey palletising robots as a complete system (13/06/2011 13:42:36)

In today's fast moving world there is a rising demand for complete packaging lines and manufacturers are turning to turnkey automation systems, in particular palletising robots. These are not only of interest to end users in say the pharmaceuticals and food processing industries, but also for machine manufacturers wishing to complement their product portfolio. This is in order to offer turnkey packaging lines where the end customer doesn't want to spend time and cost intensive integration or customisation changes, which is a common demand packaging machine manufacturers often have to face.

Gate and Door Control Specialists Introduce New Wireless Transmission System (13/06/2011 13:33:22)

Gate and door control specialists, Motion29, have introduced the new Bircher Reglomat wireless RF Gate signal transmission system to their existing range of gate and door control supplies. The new system, available in one and two channel variants, provides direction related output for safety edges on sliding, swing and folding gates.

Haydon Kerk Motion Solutions Introduces Fully Configurable (13/06/2011 09:58:21)

Haydon Kerk Motion Solutions, a premier manufacturer of engineered linear motion products, offers customers the ability to configure and download CAD models of its newest linear actuator product, the SplineRail.

NewAge® Industries Lights Up Rooftop - Congressman Mike Fitzpatrick Praises Company’s Successes (13/06/2011 09:46:46)

NewAge Industries recently completed the installation of a one megawatt (MW) rooftop solar panel system, the sixth largest in all of Pennsylvania. A ribbon cutting ceremony was held Wednesday, June 8, and the system is now in operation supplying half of the plastic tubing manufacturer's energy needs.

New Silicone Gel Bushings from AAC Are Highly Effective for Isolating Electronic Equipment (13/06/2011 09:41:26)

A new series of silicone gel mounts from Advanced Antivibration Components (AAC) are highly effective for isolating electronic equipment. Applications include speaker systems, turntables, camera mounts, etc. The mounts isolate vibration in low frequency applications with loads ranging from 0.11 lbf to 17.64 lbf per mount. The 5 mounts, identified as the V10Z61MA... and V10Z61MB.. Series have a collar ID of 3 mm to 4 mm (.12 to .16). The bushings are made of silicone gel and the collar is brass. Operating temperature range is -40°C to +200°C (-40°F to +392°F).

RTP COMPANY'S GLASS FIBER-REINFORCED PLA BIOPLASTIC COMPOUNDS IMPROVE STRENGTH AND THERMAL PERFORMANCE (13/06/2011 09:29:57)

-- Global custom engineered thermoplastics compounder RTP Company has commercialized the industry's first line of glass fiber-reinforced polylactic acid (PLA) compounds that overcome many limitations of unmodified PLA by delivering greater strength, stiffness, and thermal performance. These new materials, which target durable and semi-durable applications, are the latest extension of RTP Company's family of engineered bioplastic compounds that use resins derived from rapidly renewable resources.

Hoffman/Pentair Technical Products and OneSource Distributors Co-Develop Combiner Box to Meet Latest UL Ratings at Higher 1,000 Volts DC Operation (13/06/2011 09:24:02)

Box built to new industry standards at higher voltage suits solar application requirements, meeting customer requests and increasing system efficiency.

Reagent disposal – choosing the greenest option (09/06/2011 14:54:13)

As one of the world's largest manufacturers of instruments and reagents for water analysis, HACH LANGE has a duty to create the most environmentally friendly system possible for the management of chemical waste resulting from the use of its products. Dismissing less sustainable options, the company has invested heavily in a state of the art environment centre that handles waste reagents, bottles, cuvettes and packaging from all over Europe.

Innovative new resistors are set to bring the electric family car one step closer to reality (09/06/2011 14:43:39)

Cressall Resistors has developed a new range of liquid cooled resistors for the braking systems of hybrid and all-electric vehicles. The new range, dubbed the EV series, converts excess electricity that is not needed for recharging the vehicle's battery into heat that can be dissipated safely. They make genuine regenerative braking in electric cars a possibility by providing a method to dissipate excess braking energy as heat, via the water system.

Brevini Extends S-Series Planetary Gearbox Range to Offer Torque Ratings up to 2,500kNm (09/06/2011 14:34:35)

Brevini has extended its S-series of high torque gearboxes to deliver even higher capacity for industry's most demanding applications. Where the existing eight models cover torque ranges from 34kNm up to the 370kNm, the five new harmonically developed sizes cover nominal torque ranges from 530kNm up to 2,500kNm as standard, with even larger sizes available on request.

Plug & Play: Retrofitting for 3.5” Floppy Drives (09/06/2011 14:26:20)

You have a machine controller with a floppy drive? The machine still functions perfectly but you're not really happy with the floppy technology anymore? With the Compact Flash floppy drive (CFF 011), SIGMATEK offers an alternative, operating system-independent device. This allows the PC to be easily updated with the latest data storage technology. With the CFF 011, the data from up to 99 floppy diskettes can be stored on a single Compact Flash card. The data and programs from several machines can be saved and/or loaded with a Compact Flash card.

Piezoelectric force washers with new nominal (rated) forces (09/06/2011 14:21:34)

Two variants of HBM's successful CFW piezoelectric force washers have been launched to expand the range by providing nominal (rated) forces of 100 kN and 190 kN.

Premier Farnell’s wave of innovation continues with the launch of the element14 knode – the world’s first interactive design automation hub (09/06/2011 12:34:40)

Through a single interface the element14 knode gives the design engineer immediate access to a world of electronic design solutions. Automating the creation of project design from initial concept to full realisation, increasing productivity and accelerating time to market as another unique aspect of the element14 global engineering community.

Altium introduces a major innovation in data management for electronics design: the Altium Satellite Vault (09/06/2011 12:29:29)

Altium, has announced the release of the Altium Satellite Vault server application, a core element of Altium's advanced electronics design data management technology and a major innovation in connecting the world of design to the broader product development process.

Latest update ensures highest precision torque calibration continues (09/06/2011 12:20:34)

HBM has made a number of improvements to its established TB2 torque reference transducer family of products to ensure they continue to meet the needs for very high precision results delivered quickly.

ESAB LAUNCHES HYBRIO HYBRID LASER ARC WELDING EQUIPMENT (09/06/2011 11:44:41)

ESAB has launched the Hybrio™ family of hybrid laser arc welding equipment. This combines the benefits of laser welding and gas metal arc welding (GMAW) to create an automated welding process that is up to ten times faster than conventional alternatives, with 80-90 per cent less heat input and substantially less distortion.

Common Vision Blox 2011: Powerful imaging software for 64-Bit Windows 7 (09/06/2011 11:28:39)

STEMMER IMAGING, Europe's largest imaging technology provider, is proud to announce the release of Common Vision Blox 2011 for Windows 64-Bit. This new software library for imaging professionals supports the 64-Bit version of Microsoft Windows 7 and includes the Automated Imaging Association (AIA) certified CVB GenICam driver, compatible with the latest GenICam version.

Larox wafer knife gate valves for fly ash application (09/06/2011 11:25:05)

NRG Big Cajun Power Plant in Ventress, Louisiana, USA, has bought DN 300 Larox wafer knife gate valves to its fly ash application. Big Cajun II comprises three coal-fueled steam units, which generate 1,700 megawatts of baseload or load-following generating capacity.

TECHJET Distributing Jet Edge Waterjet Pumps in Poland (09/06/2011 11:18:07)

Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjets for precision cutting, coating removal and surface preparation, is pleased to announce that TECHJET is now distributing Jet Edge waterjet pumps in Poland.

Molex Flexi-Mate Connector System for LED Applications (09/06/2011 11:11:08)

Molex Incorporated has introduced the Flexi-Mate™ Connector System. Designed to address the backlighting needs of LED TVs, as well as room lighting applications, the Molex Flexi-Mate Connector System is an industry first solution that provides a full range of both board-to-board and wire-to-board connectivity.

Omega Engineering Services wins award for on-time delivery, quality and customer collaboration (09/06/2011 11:06:06)

Omega Engineering Services were proud to be awarded the Supply Chains for the 21 st Century (SC21) Bronze Award in May 2011. SC21 aims to accelerate the competitiveness of the aerospace and defence industries. It encompasses collaboration, partnering and alliances, and encourages working together with openness, honesty, integrity and trust. The SC21 vision is to inspire "exceptional performance by setting the highest standards for relationship management through the extended enterprise to create value and sustainable competitive advantage".

Green Hills Software adds INTEGRITY RTOS support for Freescale QorIQ® COM Express® (08/06/2011 16:52:25)

Green Hills Software, the largest independent vendor of embedded software solutions, today announced its comprehensive software development and run-time solutions for QorIQ® COM Express® Modules, bundled by Freescale Semiconductor and immediately available in the Freescale COM Express Development System kit. Green Hills support includes the INTEGRITY® real-time operating system (RTOS), award-winning MULTI® development environment and the Green Hills JTAG Probe, enabling designers to more easily begin developing high quality embedded software with the highest level of reliability and security on modular COTS hardware for industrial automation, networking, medical and military applications.

Fluke introduces new 2-channel ScopeMeters (08/06/2011 16:43:04)

Fluke, the global leader in portable electronic test and measurement technology, has introduced three new 2-channel models, the Fluke 190-202, the Fluke 190-102 and the Fluke 190-062, to its highly successful range of rugged, handheld, portable 190 Series II ScopeMeters®. Offering 200MHz, 100MHz and 60MHz respectively, up to 2.5 GS/s real time sampling rate and 400 pico seconds resolution, they complement the recently introduced four-channel Fluke 190-204 and Fluke 190-104 Series II ScopeMeters.

Parasitic load and wasted energy demands attention – say Landia (08/06/2011 16:31:06)

Soaring energy bills and the surge towards greener power still hasn't encouraged enough companies to address parastic loads – according to pump and mixer manufacturer, Landia.

BORRI NAME TUCKER AS NEW MD (08/06/2011 16:16:24)

Borri Ltd, a leading supplier of high-efficiency Uninterruptible Power Supplies (UPS), has announced the appointment of new managing director Ian Tucker.

NSK PROVIDES SOLUTION TO CEMENT DUST CONTAMINATION, INCREASING BEARING LIFE BY OVER 50 PERCENT AT MAJOR CEMENT PLAN (08/06/2011 15:56:59)

NSK's cost saving Asset Improvement Programme has succeeded in solving a recurring problem of large bearing failures in a screw pump conveying system at a major cement works. Because of contamination, 27 bearings in one year were consumed by the screw pump system. NSK has reduced this by over 50% with its solution based on Hi-TF™ bearings, at the same time reducing maintenance costs and improving reliability at the plant.

CGTech Releases VERICUT Collaboration Tool (08/06/2011 15:50:42)

CGTech, the developer of VERICUT CNC machine simulation, verification and optimisation software, is now offering a new tool for communicating and collaborating with other people outside of the NC programming department. With the new VERICUT Reviewer, shop floor personnel and other production engineers can view 3D animations of the CNC machining process.

sara Raises the Bar for Safety with its Scissor Lifts (08/06/2011 15:45:22)

sara LBS' new range of scissor lift tables conform to the highest safety standards in a wide range of applications. Constructed from steel for strength, the lifts have a maximum load of up to 12 tonnes as standard and include a number of safety features including a 'dead-man' safety switch and safety trip edge.

IDT INTRODUCES INDUSTRY’S FIRST PCI EXPRESS® GEN2 TO RAPIDIO® GEN2 PROTOCOL CONVERSION BRIDGE FOR X86 PROCESSOR APPLICATIONS (08/06/2011 15:39:44)

Integrated Device Technology, Inc. the Analog and Digital Company™ delivering essential mixed-signal semiconductor solutions, have announced the industry's first PCI Express Gen2 to Serial RapidIO (S-RIO) Gen2 protocol conversion bridge that extends scalable RapidIO-enabled peer-to-peer multiprocessor clusters to the x86 processor environment. This cutting-edge device brings together the best of two powerful interconnect protocols and opens up new applications and markets for RapidIO. The new device complements IDT's broad portfolio of Gen1 and Gen2 PCIe and RapidIO switches and bridges, signal integrity products, and world-class timing devices.

Rugged Locking Connectors Provide Secure Power and Data Transmission (08/06/2011 15:33:01)

CLIFF Electronics, leaders in the design, development and manufacture of components and connectors for audio, engineering, instrumentation, medical, lighting and vending applications announce the availability of the Cliffcon range of rugged, locking, connectors.

Quality performance of Verlinde motors and hoists in a mould handling facility (08/06/2011 15:13:13)

SIPA (Società Industrializzazione Progettazione Automazione) is an engineering firm in the Zoppas Industries group whose specialty is the production of flexible integrated automation systems. 1986 marked a strategic milestone when an American firm granted the company a licence to produce PET containers using the single phase process. The company is now a world leader for the development and supply of integrated systems for the manufacture of PET preforms and plastic containers; it is also a world performer for 2-stage preform manufacturing and for blow moulding. SIPA supplies both the large Italian groups and numerous multinationals in industries related to mineral water, beverages and prepared foods.

New Anybus CompactCom Modbus TCP 2-port module eliminates external switches (08/06/2011 15:03:29)

The new 2-port version of Anybus CompactCom for Modbus TCP is not only a fast and easy way for industrial device manufacturers to achieve connectivity to Modbus TCP. It is also a way to reduce the need for expensive external switches and cut down on factory wiring since the module comes with a built-in switch of its own.

GC1040 – first choice milling grade for stainless steels (08/06/2011 14:51:53)

GC1040, a new insert grade from cutting tool and tooling system specialist Sandvik Coromant, has been designed to give secure performance with long-lasting sharp edges when milling stainless steels. Although developed as a broad grade for the stainless steel area (ISO M), even in extreme situations such as machining austenitic or duplex materials with end mill tools featuring long overhands, a safe, optimized performance is assured.

Borger’s cost-effective pump solution for small-scale AD plants (08/06/2011 14:45:30)

To meet the market demand for AD, Börger has produced a skid-mounted pump unit for the front-end of small–scale biogas plants, which elimininates the need for rotary mixing and feed units.

Carter’s non-spray Adiabatic means no more Legionella risk for leading plastic component firm (08/06/2011 14:40:16)

According to Carter Environmental Engineers, a fast-track installation has completely eliminated the risk of Legionnaire's Disease at Accuma Plastics, a major supplier of plastic components for electric battery industries.

New Decentralised Motor Control System from Eaton (08/06/2011 14:33:10)

Ideally suited for use in distributed control applications on conveyors, materials handling systems, and all installations that can benefit from a decentralised motor control system, the latest Rapid Link 4.0 motor control units from Eaton's Electrical Sector combine versatility, ease of installation, convenient plug-able connections, space-saving compact construction and an exceptional IP65 rating that allows them to be used in the toughest of environments.

TorqSense transducers help to guarantee valve actuator performance (08/06/2011 14:24:08)

Rotork Controls has established a global reputation for robust and reliable valve actuators, operating in some of the world's most demanding and critical applications. Thorough testing of the motors used in the actuators is one of the keys to this assured performance, with TorqSense transducers from Sensor Technology playing a vital role in the test process.

– Easy assembly with igus DryLin W (08/06/2011 14:15:53)

The DryLin W range from igus offers a complete modular linear guide system which is low in cost, provides flexibility and is offered in both single and double rail configurations. One great advantage of this linear slide system is that the assembly is simple: the housing can be attached just by the turn of a screw.

P4A's First UK Progea Movicon SCADA Workshop Attracts Over 30 Systems Integrators to National Motor Museum at Gaydon (08/06/2011 14:00:38)

Over 30 UK systems integrators attended the first UK workshop for Progea Movicon SCADA held by Products4 Automation on 20th April at the National Motor Museum at Gaydon in Warwickshire. Attendees to the workshop were also treated to new product introductions from P4A, including the company's highly innovative, low cost OEE-Lite module, which allows organisations to analyse their production performance without the cost and complexity of full MES.

AVL proves promising electric supercharger can reduce fuel consumption (08/06/2011 13:53:02)

AVL and partners, Dynamic Boosting Systems and Turbocam Europe, have completed the concept validation of a new, lower cost electric supercharger.

Compact and cute, the one-cable iDS CP family of GigE cameras is a real innovator (08/06/2011 13:42:57)

Providing brilliant images, thanks to state-of-the-art CMOS technology, at 29 x 29 x 41 mm, the iDS uEye CP family boasts the strong performance of a modern industrial cameras in the smallest of packages.

VICTREX® PEEK™ POLYMER (08/06/2011 13:23:17)

Mandatory requirements for aerospace polymers are weight reduction to lower fuel costs, excellent mechanical strength and dimensional stability, and the ability to meet industry standards and specifications regarding flame, smoke, and toxicity emissions.

Innovation in Diecasting Cooling from Burkert at the GIFA (08/06/2011 13:01:40)

At The GIFA – The Bright World of Metals exhibition, held in Dusseldorf from 28th June to 2nd July 2011, Burkert is showing (in Hall 10, stand 10A70), its latest advances in modular valve and sensor technologies for improving diecasting applications. These developments deliver innovative cooling in diecasting operations, helping to improve quality and process efficiency to meet the demanding standards of the global automotive industry.

ZERO LOSS DRYERS NOW EVEN (08/06/2011 12:53:42)

The range of successful smart adsorption air dryers launched by Hi-line Industries Ltd have been even further enhanced by the addition of touch-screen technology incorporated into their automatic energy management system (AEMS). This cutting edge facility enables remote dial-in control via mobile phone or laptop, while even lower running costs are achieved by using a blower/fan, rather than the more expensively produced compressed air, for desiccant regeneration.

Reference force transducers up to 5 MN (08/06/2011 12:47:30)

HBM has launched its C18 reference force transducers with a nominal force range of up to 5 MN. Reference transducers are used to calibrate force measurement transducers by comparing results against a defined standard.

UNF threads ensure suitability of U10 force transducers for more applications (08/06/2011 12:39:13)

HBM has extended the flexibility of its U10 force transducers with the U10S version which has UNF standard threads for mechanical connection.

PPT VISION Announces Comprehensive Guarantee on All Smart Camera Applications (08/06/2011 12:26:01)

PPT VISION now extends a full one-year guarantee on its complete line of machine vision camera installations, including hardware, software and accessories, as well as the overall performance in meeting the application requirements.

NON-COPPER-COATED WELDING WIRES BOOST QUALITY AND PRODUCTIVITY (08/06/2011 12:18:05)

The latest ESAB OK AristoRod non-copper-coated welding wires offer significant improvements in productivity and quality, meaning that users can reduce the cost of manual, mechanised or robotic welding.

Giga-tronics' Microsource Subsidiary Receives Supplier of the Year From Boeing (08/06/2011 12:12:32)

Microsource, Inc., a Giga-tronics Company have announced that it has been recognized as Supplier of the Year in the Avionics category by The Boeing Company. Giga-tronics' Microsource was one of the 16 companies honored May 18, 2011 for distinguished performance in working with Boeing.

DE-STA-CO Offers 3D Product Models through TracePartsOnline.net (08/06/2011 12:06:34)

Flexible automation leader DE-STA-CO is now using the TraceParts Internet service to provide 3D product models for engineers and designers, through the TracePartsOnline.net website and its affiliates. DE-STA-CO's customers will be able to select the right product for their needs and then download neutral and native 3D CAD models of the products into their designs.

ISA publishes Instrumentation and Control Systems Documentation, Second Edition (08/06/2011 11:51:30)

The International Society of Automation (ISA) announces the publication of Instrumentation and Control Systems Documentation, Second Edition, by Fred A. Meier and Clifford A. Meier.

Farnell expands partnership with Hammond Manufacturing by doubling stock of small enclosures (08/06/2011 11:30:15)

Faster access to broader range of small enclosures supports reduced time-to-market, improves buying experience and reduces transaction overheads.

Discounted analysers on offer at Quantitech (08/06/2011 11:13:54)

Instrumentation specialist Quantitech is offering customers a rare opportunity to purchase fully serviced ex-rental and demonstration environmental monitoring equipment at heavily discounted prices.

‘Royal Northern College of Music ‘in tune’ with Cosaf’s green initiatives’ (08/06/2011 10:13:12)

Industry HVAC experts, Cosaf, have won a competitive contract at the renowned Royal Northern College of Music in Manchester. With a firm focus on green policy, the college have enlisted Cosaf to help maintain an eco-friendly environment with the replacement of their boiler and air conditioning systems

New Addition to EchoPod Ultrasonic Level Sensors allows Monitoring and Control up to 5.5 m (08/06/2011 10:01:10)

The EchoPod DL34 is the latest addition to FlowLine's series of general purpose, non-contact ultrasonic level sensors, extending the EchoPod measurement range from 3m to 5.5m. Similar to other EchoPod level sensors, the DL34 combines switch, control and measurement capabilities in one package, providing a total solution for level control and automation whilst minimising tank system hardware

Bombardier Aerospace Adds Altair’s HyperWorks to its Strategic Solutions for Computer Modeling of Airframes (08/06/2011 09:56:29)

Altair Engineering, Inc., a leading global provider of simulation technology and engineering services, today announced that it has signed an agreement with Montréal-based Bombardier Aerospace under which the aircraft manufacturer will expand its use of the HyperWorks suite of computer-aided engineering tools as a strategic solution for computer modeling of airframes and conducting finite-element analysis.

- NEW EXLAR K SERIES ACTUATORS IMPROVE OEM COMPETITIVENESS WITH MULTIPLE MODEL TYPES TO SUIT EVERY APPLICATION & BUDGET (08/06/2011 09:44:23)

The new Exlar K Series of linear actuators from INMOCO are designed to improve OEM competitiveness, with a range that offers multiple model types, enabling users to chose the option best suited to their application and budgetary requirements. Providing a truly universal solution for rod style actuator applications, the K Series actuators use Exlar's patented roller screw technology, with its proven reliability and superior load carrying capacity, and allow the user the choice of multiple - and lower cost - motor technologies.

New Manufacturing Systems Embrace Open Networks (08/06/2011 09:33:04)

Across Europe manufacturing is being automated as a way to both compete against imports from 'low cost' economies and to ensure consistent output quality. However 'greenfield' projects are rare and the vast majority of automation projects are retrofits, upgrades and extensions. Here, John Browett of the CC-Link Partner Association (CLPA), looks at how the upgrade of systems using open networks can provide major cost benefits, while also improving system performance.

“GREEN” DYMAX SPEEDMASK UV MASKING FROM INTERTRONICS (07/06/2011 14:26:12)

Adhesives market leader Intertronics have found solvent-free, UV curable temporary masking resins to significantly simplify component masking processes while greatly reducing costs. This is experienced in lower scrappage rates, reduced labour rates and enhanced process speed. It has proven possible to reduce costs in the case of aircraft components by some 40% with 60% to 70% time saving.

Molex Introduces Standardised Antennas to General Market (07/06/2011 14:15:18)

WALLDORF, Germany – Molex Incorporated has released a new standard antenna for applications using the 2.4 GHz ISM (industrial, scientific and medical) band and WiFi. The 2.4 GHz band antenna is the first release in a series of Molex standard antennas designed for the industrial, consumer, medical and automotive markets. Based on advanced manufacturing and RF technologies, Molex standard antennas offer high performance and ease of integration for demanding wireless applications.

New AXR Series Two-Axis Rotary Assembly enables high throughput micromachining of complex components (07/06/2011 13:56:39)

Aerotech's new AXR series 2-axis rotary micropositioning assemblies combine yaw and tilt axes that enable high speed and high throughput micromachining of complex 3D structures such as MEMS components. As part of the enabling technology for many microfabrication techniques, the rotary assembly provides an accurate platform for positioning and manipulation from a precision aligned hemispherical surface.

Brevini Power Transmission is Gearing up to Support Renewable Energy Industries (07/06/2011 13:49:38)

As fossil fuel prices continue to increase and the world becomes more aware of its environmental responsibilities, the UK is one of the nations leading the call for alternative energy sources to be utilised. This has led to British engineering growth in the Renewables market that just a decade ago seemed implausible. As the technology expands it is important to have expert mechanical support to maintain efficiency; Brevini UK has been working in the energy sector for many years and has a number of products and services that will help to keep things running efficiently.

Smart Parking Sensor Platform by from Libelium enables city motorists save time and fuel (07/06/2011 13:37:24)

New Smart Parking technology from Libelium enables cities to make efficient use of their parking resources. The new platform allows consultancies and system integrators to customise and deploy the solution in their local area.

Join Edbro for an Uplifting Experience this June at Tip-Ex 2011 (07/06/2011 13:07:32)

Hydraulic tipping gear specialist, Edbro, will be displaying its industry leading products on two stands at Tip-Ex this year, over the weekend of June 10th-12th. Inside the hall visitors will be able to speak with the expert sales team and see demonstrations of some of Edbro's state-of-the-art cylinders and safety equipment. An external stand will boast product displays of the latest skip-loader and hook-lift systems as well as playing host to the ever popular Edbro BBQ.

Cortus APS3 Processor Licensed by Certicom (07/06/2011 12:30:42)

Cortus today announced that Certicom, a wholly owned subsidiary of Research In Motion Limited (RIM), and an industry leader in Elliptic Curve Cryptography (ECC) security has licensed the Cortus APS3 CPU for use in their hardware security technology.

Amphenol InfoCom names Arrow Electronics EMEA Distributor of the Year 2010 (07/06/2011 12:25:11)

Dreieich, Germany – 7th June 2011 – Arrow Electronics has been named 'Distributor of the Year' for Europe, Middle East and Africa (EMEA) by Amphenol InfoCom. At a ceremony in Barcelona, Arrow was recognised for its outstanding commitment to partnership and its excellent performance.

New USB Interface on All Teseq RF Amplifiers Simplifies Operation (07/06/2011 12:02:37)

Teseq, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, now offers an integrated USB port on its complete range of CBA series, solid-state, class-A power amplifiers that offer frequency and power ratings specifically for EMC immunity test applications.

The Flexible Outdoor Solution (07/06/2011 11:54:15)

Rittal's Toptec range of outdoor enclosures is centred around a stainless steel TS 8 form frame which can be stripped down to the frame to enable maximum access during equipment installation to create a fast and efficient working option.

Steatite Introduces the VIA VB8004 Mini-ITX board (07/06/2011 11:48:54)

The VIA VB8004 Mini-ITX board combines a choice of 1.2GHz and 1.6GHz VIA Nano processors and the VIA VX900 media system processor, providing a high performance and highly scalable solution for advanced digital signage and gaming systems.

5-axis machining centre offers easy access (07/06/2011 11:33:08)

The new DMU 80 eVo vertical machining centre from DMG has an overhead gantry supporting the spindle head, resulting in exceptional accessibility to the working area, including from the side, even when an automated workpiece handling system is used. The design also provides a large 800 x 650 x 550 mm working volume in a compact footprint.

ISA Accepting Abstracts for ISA Automation Week 2011 Poster Sessions (07/06/2011 11:28:43)

Research Triangle Park, North Carolina, USA (6 June 2011) – The International Society of Automation (ISA) announces that abstracts for presenting technical topics as Poster Sessions at ISA Automation Week 2011: Technology and Solutions Event are being accepted through 12 August 2011.

High speed thermal cameras for Machine vision and process control (07/06/2011 11:13:48)

The ImageIR® range of thermography cameras from InfraTec Gmbh and supplied by Armstrong Optical offer non destructive active thermography testing, process monitoring and control with frame rates of up to 3 KHz across the infrared spectrum (0.8 to 12microns). Operating in line-scan mode rates of 10 KHz can be achieved.

HIGH TEMPERATURE QUAD OPERATIONAL AMPLIFIER (07/06/2011 10:52:54)

ETLG Inertial Aerosystems is introducing the HT1104 high temperature quad operational amplifier semiconductor. Manufactured by Honeywell using it's unique Silicon on Insulator (SOI) technology, it is designed for use in systems operating in severe high temperature environments such as oil and gas drilling operations and Aerospace propulsion systems.

Parker helps compressed air users identify cost savings with innovative Transair software (07/06/2011 10:28:28)

Parker Hannifin, the global leader in motion and control technologies, has launched an innovative new software programme to help engineers determine the volume of wasted air due to leaks and pressure losses in compressed air networks. Designed to estimate the associated annual costs, the Parker Transair Energy Efficiency Calculator gives decision makers an early indication of the savings to be made by opting for a modern and correctly designed pipe network, such as the Transair system.

Atlas Copco launches 0% finance scheme to encourage investment in energy efficient compressed air technology (07/06/2011 10:23:00)

A 0% APR (Annual Percentage Rate) finance scheme is being launched by Atlas Copco Compressors UK to replace the recently withdrawn Carbon Trust loans scheme and to encourage investment in energy efficient compressed air technology. The scheme will be available on equipment ordered from 1st July 2011.

Low-Cost Industrial Accelerometers for Machine Monitoring (07/06/2011 10:14:28)

Measurement Specialties, Inc. has just released its Model 8032-01 accelerometer to production. Specifically designed for machine monitoring applications, this rugged, low-cost device features a stainless steel housing and an integral cable with molded strain relief.

INTERALIA PARTNERS LAAUSER & VOHL WITH DIGITAL ANNOUNCER FOR GERMANY’S LARGEST CONCERT HALL (03/06/2011 13:02:41)

The Kölnarena, Germany's largest ultra-modern, multifunctional events forum, has installed a state-of-the-art digital announcement system manufactured by Interalia, a leading designer and manufacturer of digital voice announcement solutions.

shentongroup GENERATES SUCCESS AT THE MINACK THEATRE (03/06/2011 12:53:26)

shentongroup, the specialist supplier of power generation and energy support systems, has expanded its long term association with the iconic Minack Theatre in Cornwall by converting its generator from single phase to three phase following a power upgrade at the facility.

THERMAL ENERGY INTERNATIONAL’S GEM TRAPS PROVIDE 9.4% ENERGY SAVINGS AT SERVIZI OSPEDALIERI, ITALY (03/06/2011 12:44:14)

Leading industrial laundry, Servizi Ospedalieri, is fulfilling its environmental pledge of reducing energy usage by installing the award winning GEM venturi orifice traps from Thermal Energy International. Trialled through Thermal Energy International's Italian agent, Nuova Folati, at Servizi Ospedalieri's plant in Porto Garibaldi, the laundry's independent, technical assessors, IMAT S.r.l. of Rome, was able to verify that GEM steam traps have provided close to a 10% saving in energy consumption compared to newly installed mechanical traps.

Heason Technology extends air bearing positioning stage range with Dover MAB™-100 linear motor stage (03/06/2011 12:22:24)

Through its exclusive distribution partnership with the USA based motion specialists Dover Inc., Heason Technology offers a wide range of extremely precise air bearing positioning stages including the MAB-100 single axis linear motor driven stage. With a 100 mm travel range, nominal overall accuracy within one micron and a choice of resolution options from 5 microns to 5 nanometres, the compact MAB-100 essentially eliminates the unwanted motion characteristics that are associated with contacting bearing systems such as friction and hysteresis, and delivers exceptionally precise positioning with outstanding straight-line motion, high stage stiffness and rapid dynamic performance.

Molex next generation SolarSpec™ Junction Box for smart functionality (03/06/2011 12:16:57)

- Molex Incorporated is introducing its new SolarSpec™ smart Junction Box making it easy for manufacturers of solar photovoltaic (PV) panels to provide their products with module-embedded safety and monitoring functions, as well as convenient, safe and dependable connection facilities.

HSAutoLink Interconnect System from Molex Delivers Connectivity (03/06/2011 12:11:51)

Molex Incorporated has expanded its HSAutoLink™ Interconnect System with the introduction of HSAutoLink high-speed in-vehicle data bus assemblies that deliver robust connectivity to commercial automotive and other transportation sectors.

TAILOR-MADE SOLUTIONS INCREASE SERVICE LIFE (03/06/2011 11:55:55)

Dirt, moisture, abrasion and high mechanical loads: driving elements in agricultural machinery and the associated mounted implements are subject to severe strain. The bearings used also have to be tailored to these conditions. It is possible to increase the drive systems' useful life by selecting the ideal bearings or using customised engineering. Special attention should be paid to the materials and seals.

Atlas Copco launches three new desiccant air dryer ranges (03/06/2011 11:41:24)

Atlas Copco has launched three new energy-efficient desiccant air dryer ranges designed to ensure a reliable source of high quality, dry compressed air is available to meet the needs of the most demanding applications. The new dryer ranges are particularly suitable for industries such as electronics, food and beverage, pharmaceuticals and oil and gas process operations, where using the highest quality compressed air is vital. The three new air dryer ranges use desiccants to adsorb moisture from the compressed air, therefore protecting production process equipment and helping to maintain end product quality.

EMKA MAKE HINGE INSTALLATION EASIER (03/06/2011 11:23:27)

Program 1056 hinges, now available from "everything but the enclosure" company EMKA, provide 180° opening with screw-on and lift-off features

Business gears-uo for 24-hour access with telecoms technology (18/05/2011 10:35:36)

The business sector is increasingly under pressure from a diverse society to provide a seamless access to information and services. The past five years has witnessed incredible growth in the potential for technology to affect our daily lives. The continuing massive investment from the Telecom companies has resulted in the development of new technologies, bringing the potential for streamlining services to such a point that a great deal of business conducted with and by commerce and industry will require much less human intervention. Costs of self-service transactions are known to be a fraction of those for manual transactions and service availability for automated transactions can be twenty four hours a day, seven days a week.

Shentongroup EXPANDS ITS powertherm CHP RANGE (18/05/2011 10:25:06)

Shentongroup has expanded its powertherm range of innovative Combined Heat & Power(CHP) systems. By combining its expertise with that of its European partners, SEVA AG and Tedom, shentongroup now supplies its powertherm range in over 50 sizes ranging from 7kW to 2MW and in five package styles that include open sets, acoustic enclosures, compact series, containerised and total pre-fabricated plant room packages.

Salisbury District Hospital saves 10% of its steam production with GEM steam traps (18/05/2011 10:10:11)

Salisbury District Hospital is saving approximately 10% of its steam consumption following the installation of Thermal Energy International's GEM venturi orifice steam traps, which is providing the hospital with significant energy savings. Together with other energy saving incentives already introduced, the GEM traps have helped ensure that the hospital is working towards the Government's mandatory performance targets for the NHS to reduce CO2 emissions by 10% from 2007 to 2015 in its new and existing buildings.

Lane Electronics Signs Positronic in the UK (05/05/2011 06:57:21)

Lane Electronics, one of the UK's leading suppliers of interconnection solutions, has added Positronic to its range of franchised suppliers. Positronic is recognised as a leading manufacturer of power, D-subminiature, rectangular and circular connectors as well as fibre optic solutions and cable assemblies and the addition of its products to Lane's line card greatly enhances the company's ability to satisfy practically every interconnect application.

LASER World of PHOTONICS 2011 to present the latest applications in semiconductor production, thin-film technology and sensor technology (03/05/2011 07:45:32)

As a key technology, microelectronics is the foundation for the success of the most important branches of German industry. 50 per cent of all industrial products manufactured in Germany now contain at least one electronic component. 8 out of 10 innovations in automobile construction already stem from the electrical engineering, electronics and IT industries. Optical technologies contribute a great deal to this dynamism: laser-based processes create the basis for miniaturisation in chip and hardware production, and ensure maximum precision in automated manufacturing of complex electronic components.

knitter-switch - Smallest double pole rotary switch (03/05/2011 07:38:03)

The MRS 8000 series from knitter-switch, one of Europe's leading switch manufacturers, is a tiny rotary switch said by the company to be the smallest double pole rotary switch currently available. Measuring just 9.9 x 9.9 x 4.5 mm (L x W x H), the MRS8000 series is ideal for many applications including medical devices, industrial automation control systems and measuring instruments.

1U High, Front-Connect DC BREAKER Distribution Panel from UNIPOWER (17/04/2011 18:13:05)

UNIPOWER's latest distribution panel series is designed for users who need, or prefer, front panel connections. The DPBF1U Series provides distribution and overload protection for eight circuits and the 1U high unit can be mounted in either a 19 or 23in. rack.

element14 offers electronics industry free legislation guidance on RoHS Recast Directive (15/04/2011 12:12:08)

element14, a collaborative global electronics community from Premier Farnell plc (LSE:pfl), is providing additional resources and guidance on its comprehensive legislation page to help manufacturers and design engineers to better understand the recent changes made in the Restriction of the use of certain Hazardous Substances (RoHS) Directive. An informative free RoHS eBook, which addresses the recent recast changes and live chat with global legislative expert Gary Nevison, are available to demystify and expedite compliance.

Genzyme monitors 50,000 SCADA points with Anybus Communicator (15/04/2011 12:08:13)

The company, which is a world leader in biotechnology, is creating a new polyclonal antibody production site.This is an innovative production facility: the process has been automated as far as possible, to reduce human error in the many stages of the process (separation, purification, filtration, ultrafiltration, haemadsorption etc.).This involves being able to interface with a battery of very mixed laboratory equipment, which was not initially designed to communicate with fieldbuses. Genzyme has used about thirty HMS Anybus Communicator gateways, to enable consistent SCADA management across all the devices in use. Benefits are as much in terms of quality as in production costs

Fluid Dynamics extends distribution network to Malaysia (15/04/2011 12:05:55)

UK based Fluid Dynamics a leading supplier of environment friendly hardwater scale prevention products has appointed ABS Systems as its distributor for Malaysia.

Altium sponsors ‘Part-Time Scientists’ on their way to the moon (15/04/2011 12:04:24)

German Google Lunar X PRIZE team uses Altium Designer for their electronics designs

Red Rooster expands to the Norwegian market. (15/04/2011 12:00:36)

Red Rooster has over twenty years experience in providing and maintaining high quality lifting, winching and load measuring equipment throughout the world.

USB Device Driver - Single Channel Hi-Speed USB to UART/FIFO Interface IC for Next Generation Peripheral Design (15/04/2011 11:57:50)

Future Technology Devices International Limited (FTDI) has further strengthened its portfolio of USB interface IC products with the release of the FT232H USB2.0 Hi-Speed device. This versatile single channel USB to UART/FIFO interface device can be configured via EEPROM to use a variety of different serial or parallel interfaces. Bundled with FTDI's well established and proven USB device drivers, this solution enables engineers to easily add Hi-Speed USB connectivity into new and legacy peripheral designs with a minimum of design and support effort. In addition, the associated UM232H evaluation module allows engineers to quickly prototype and tests the FT232H's suitability for incorporation into new system designs.

Industrial PC Family Launched - Hoffmann + Krippner’s 10.4-inch touchscreen panel PC family supports low-cost, low volume front panel customisation (15/04/2011 11:55:52)

IP65/NEMA 4X-rated industrial touch screen panel PCs suit machine control in industrial automation, food processing, medical, pharmaceutical and automotive manufacturing environments

Balluffs’ GlobalProx Family Keeps Expanding (15/04/2011 11:52:23)

Balluff has expanded its popular economical GlobalProx® Family to include 2-wire inductive sensors offering resistance to welding spatter and capacitive sensors for level detection or object detection of non-metallic components.

Balluff Contrast Sensor BKT 67M – Don’t just think black and white (15/04/2011 11:50:14)

Balluff offers a broad spectrum of photoelectric sensors. The new BKT 67M contrast sensor complements the continually growing product portfolio. As a contrast sensor it is a specialist in challenging conditions, even the slightest contrast differences are easily detected.

Weld Immune Factor 1+ Sensors….a plus for your application (15/04/2011 11:47:52)

Balluff have introduced a long range Factor 1 sensor family that as well as detecting differing metals at the same distance also save time during installation as their long range feature means that minimal sensor adjustment during set up is required. The Balluff Factor 1+ family is available in sizes M8 to M30, the most popular M18 versions have a flush range of 8mm and a quasi-flush mounting with a 12mm sensing range.

LPP Pumps Reduce Total Cost of Ownership and Environmental Load (15/04/2011 11:45:11)

The LPP pump series of Larox Flowsys Oy incorporates a unique operation principle, which brings along several environmental benefits, such as low energy consumption, long lasting hoses and low waste generation. These environmental benefits also bring considerable cost savings during the life-cycle of the pump.

LIGHTWEIGHT, CORROSION RESISTANT VICTREX® PEEK™ PIPE FEATURED IN WOOD DRYING APPLICATION (15/04/2011 11:42:44)

Cape Cod Wood Sidings, Inc., a division of Marwood Ltd., has selected VICTREX® PEEK™ pipe for its wood kiln heat exchanger system to enhance performance and extend service life. To further heighten the overall performance of the system, the stainless steel fittings used to install the VICTREX PEEK pipe are coated with VICOTE® Coatings, based on VICTREX PEEK polymer, to protect the metal from external corrosion. The coating offers exceptional wear resistance, high temperature performance, strength and durability.

Macron in Times Square: Macron Actuators Bring Pop-Tart Varietizer to Life at Pop-Tarts World (15/04/2011 11:37:33)

Croydon, Pa - Macron Dynamics Inc., a manufacturer of linear actuators, linear motion components, and custom mechanical motion systems, showed up prominently in New York City this past winter when their MacSTANDARD MSA-M6S linear actuators were used to power the robotic Pop-Tart® Varietizer in New York City's Pop Tarts World&#61668;.

Eaton Starters Support Networking as Standard (15/04/2011 11:32:17)

With the introduction of the new SmartWire-DT interface module for its innovative range of PKE electronic motor protection circuit breakers, Eaton's Electrical Sector is now offering a full range of networked motor starter solutions for control panels, which use only standard components from the renowned xStart family.

Molex introduces Latest iPass+ High-Speed Channel (HSC) CXP Copper and Optical Products (15/04/2011 11:29:38)

Molex Incorporated announces its latest additions to the iPass+™ product family. The iPass+ High-Speed Channel (HSC) CXP copper and optical system offers connectors and cables that achieve rates of up to 120 Gbps of pluggable data over 12 lanes in one assembly. This dual paddle-card system was adopted as the InfiniBand CXP 12x QDR standard, and by IEEE 802.3ba as the 100G Ethernet standard, providing 10 lanes of 10 Gbps data rates.

Selco Products' New Digital Temperature Controller to Over 2,000°F Offers Easy Configuration and Installation (15/04/2011 11:20:05)

Selco Products Company has introduced the second generation 2699B Electronic Temperature Controller offering a highly flexible temperature control solution in a compact, easy-to-install enclosure (75x33x70 mm). Utilizing the latest electronic technologies, the new controller was developed with fewer components thereby reducing costs. The result is an extremely affordable unit that includes a temperature range to over 2,000°F, high functionality software, timer control for energy savings, multiple power and sensor inputs, multiple output types, and a variety of selectable hardware configurations. Typical applications include temperature control for commercial food equipment, heaters, refrigeration/freezers, and HVAC equipment.

HI-LINE STRENGTHENS CUSTOMER SERVICES TEAM (15/04/2011 11:17:47)

Hi-line are pleased to announce the recent appointment of Nigel Winfield to the management team, reporting directly to company directors, Steven Smith and Michael Thurlow.

Green Hills Software Announces INTEGRITY Support for Power Architecture VLE Brings High-reliability Partitioning to Extremely Resource Constrained Environments (15/04/2011 11:15:09)

Embedded World — Green Hills Software, the largest independent vendor of embedded software solutions, today announced that its INTEGRITY® real-time operating system has been optimized for the Power Architecture® Variable Length Encoded (VLE) Instruction Architecture, available in Freescale Qorivva™ Power Architecture automotive microcontrollers such as the MPC55xx and MPC56xx families. The VLE optimizations enable the INTEGRITY RTOS to achieve a minimum flash footprint of approximately 50 KB while providing total reliability, safety, and security through memory protection and virtual memory for all application and system processes.

Green Hills Software Announces Software Platform for Smart Energy Uniquely Provides Absolute Security, Safety and Reliability for Smart Grid Intelligent Electronic Devices (15/04/2011 11:11:21)

Embedded World and Smart Grid Cyber Security Summit East — Green Hills Software, the largest independent vendor of embedded software solutions and the only provider of an EAL6+, High Robustness NSA-evaluated and NIAP-certified real-time operating system (RTOS), introduced today the Green Hills Platform for Smart Energy

Netas Selects Green Hills Software for its Router and Switch Communications Products Proven RTOS and Advanced IDE Enable Reliability for Products in Harsh Tactical Environments (15/04/2011 10:45:32)

Embedded World — Green Hills Software, the largest independent vendor of embedded software solutions, has announced that its INTEGRITY® real-time operating system (RTOS) and MULTI® integrated development environment (IDE) are being used by Netas in the company's communications switch and router products targeted for use in harsh tactical environments. Netas, Turkey's leading telecommunications infrastructure provider and systems integrator, deploys best-of-breed networks and telecom solutions to organizations including Turk Telekom and the Turkish Armed Forces.

Logicalis Says Cloud Computing vs. Server Purchases is Hot Social Media Topic among IT Professionals (15/04/2011 10:42:32)

To buy or not to buy? That seems to be the question among enterprise IT buyers weighing server purchases according to Logicalis, an international provider of integrated information and communications technology (ICT) solutions and services. During the technology solution provider's recent social media conversation sweep of IT decision makers, many indicated they were considering taking it to the cloud when it came to server purchases.

National Electronics Week UK 2011 sets a new standard for Electronics Events within the UK. (15/04/2011 10:40:07)

UK 2011 has answered the call from the UK electronics community to provide an event which focuses on all aspects of electronics supply chain, showcasing the strengths and capabilities of the UK industry. The event will focus on the latest in DESIGN, EMBEDDED, PCB and SMT technologies and much more.

NEW INTERACTIVE SEAWARD SITE (15/04/2011 10:36:44)

To mark the creation of the new integrated Seaward brand‚ an interactive new website has been developed to provide a wealth of test and measurement instrumentation information at the touch of a button.

PcVue and Passivhaus, monitoring an ultra-low-energy building (15/04/2011 10:27:02)

This trend-setting building comprises a clinic for physiotherapy and medical muscle-building plus the officesof the builder, Steffen Holzbau. All of the efficiency systems are monitored from a PcVue 9.0 BMS systemwith remote WebVue access linked to BACnet controllers and communication. As a specialist in design of wooden buildings, Steffen Holzbau planned and built the facility in cooperation with Sanichaufer based in Luxembourg - where the building is situated - and the contractor GIGAAutomation of Saarbrücken in Germany. GIGA-Automation is a PcVue Solutions Certified Partner which provides integrated building management systems (IBMS) in Germany and Luxembourg. The BACnet network was developed to rigorous specifications: PcVue for the operator workstation and control system, DDCs from SAIA Burgess with native BACnet communication and a Menerga Control System for the swimming pool and therapy controls.

Kemppi launches production in India (15/04/2011 10:21:18)

Kemppi Oy, a leading Finnish welding equipment and solution provider, has set up a production facility in Chennai, India, for the manufacture of welding products intended for the local market

Altium redefines board-level design for the future, again! Announcing Altium Designer 10, AltiumLive, Altium Vaults (14/04/2011 16:41:42)

Altium aims to help propel the electronics design industry forward to meet the needs of electronics designers in what everyone agrees will be a connected future. In addition to the milestone release of Altium Designer 10, the company is announcing Altium Vaults and AltiumLive.

Applied Materials and Magma Integrate CAD and Inspection Systems for Faster Yield Ramp at Advanced Nodes (14/04/2011 16:40:23)

– Applied Materials, Inc. and Magma Design Automation, Inc. announced today that they have integrated Magma's CAD (computer-aided design)-based navigation and yield analysis software with Applied's advanced inspection systems. This unique combination of design and manufacturing tools has accelerated lithography qualification and improved chip yields at multiple customers for the development and production of advanced technology nodes.

Leading SC21 aerospace and defence EMS manufacturer to showcase services at NDI Conference (14/04/2011 16:01:55)

Full turnkey service and Fast Track production from AWS Electronics Group help drive British growth Leading independent Electronic Manufacturing Solutions provider, AWS Electronics Group, is to take part in the prestigious NDI Annual Conference and Exhibition on 24th and 25th March at Saviles Hall at the Royal Armouries in Leeds. The theme of the Conference - "Innovate, diversify, export – strategies to aid growth for the Defence Security and Aerospace Supply Network" – is one which AWS Electronics thoroughly supports, as demonstrated by the company's leading supplier and Silver Award status in the high-profile SC21 supply chain initiative, an achievement the company has held for the past two consecutive years.

Weald’s LMF Circular Connectors Come With Thermocouple Contacts If Required (06/04/2011 07:07:14)

Lane Electronics, one of the UK's leading electrical and electronic connector specialists, has introduced a family of multi-contact circular connectors manufactured by Weald Electronics. The LMF Range connectors are suitable for use in exposed environments and are available in a range of shell styles and shell sizes. Importantly, LMF connectors can be supplied with thermocouple contacts as an option. Other options include full 360ºC EMC screen termination.

LASER World of PHOTONICS 2011 will present ultra-short pulsed lasers for micromaterial processing (06/04/2011 07:02:09)

New laser systems are making processes less energy-intensive and more accurate. In many cases innovative lasers enable certain production steps to be carried out, especially when micromaterial processing is involved – i.e. drilling, milling and cutting in the microscopically small range. The lasers used in this processes do not emit light continuously, they are "pulse" operated, i.e. they emit their light in time-limited, very short "pulses" and therefore protect the material to be processed. New ultra-short pulsed lasers combine pulse rates in the picosecond or femtosecond range, i.e. from 10 12 or 10 15 seconds, with hitherto unknown performance levels. LASER World of PHOTONICS 2011 will present the latest solutions in the area of ultra-short pulsed lasers at the New Munich Trade Fair Centre from 23 to 26 May 2011.

Phidgets launches the second version of its popular Single Board Computer.Runs Debian Operating System, Faster, More Flash Memory (04/04/2011 12:24:59)

&#8213; Phidgets Inc. released today the 1072 – PhidgetSBC2. This new version of our popular Single Board Computer has a faster CPU, more Flash memory, an extra 2 USB Ports, and a Real Time Clock. It also runs the Debian Operating System.

VPCalculator (04/04/2011 12:21:35)

VPInstruments releases VPCalculator 2.0. With VPCalculator, you can easily select your compressed air flow meter. The VPCalculator offers a simple way of calculating which flow meter you need for your specific application by adding some simple parameters.

New extended torque ranges on offer from British Autogard (04/04/2011 12:17:50)

British Autogard, the market leading Torque Limiter and Power Transmission Coupling manufacturer, is pleased to introduce the new 820 Modular Torque Limiter Catalogue. The Catalogue features a wider size range, including the new size 6 model, offering a greater torque range than the previous edition. Following extensive and continual research and development, the existing range has also been up-rated resulting in a greater capacity being offered. Autogard engineers constantly review their designs and raw material selections, and combined with Autogard's manufacturing team striving for ever better manufacturing performance, the result is an improved, stronger, higher quality finished product.

Tsubaki is named IADA supplier of the year in its first term of partnership (04/04/2011 12:15:36)

Tsubaki, the world's leading manufacturer of roller chain products, has been awarded the title of supplier of the year from the Independent Authorised Distributor Alliance (IADA) for 2010 in its inaugural year of supply. The award, which is voted for by the group's members, is presented to the supplier that best matches the group's philosophy of high quality and service throughout the year.

INMOCO LAUNCHES SMALLEST EtherCAT-ready DIGITAL SERVO DRIVE (04/04/2011 12:04:23)

Inmoco has launched the smallest EtherCAT-ready digital servo drive, the Gold Whistle from Elmo Motion Control. The Gold Whistle is a super miniature network-based servo drive offering high power-density. The drive is PCB-mounted and delivers up to 1.6 kW of continuous power and 3.2 kW of peak power in a remarkably compact package that measures just 55 x 46 x 15 mm, and weighs a mere 55 g.

Eclipse® 705 in critical applications (04/04/2011 11:57:53)

Released in 1998, The Magnetrol International NV Eclipse® Model 705 was the first two wire guided wave radar (GWR) on the market. Thirteen years later, this high quality GWR device is still fluently finding its way to highly critical applications.

Modified Atmosphere Packaging (MAP) provides long-term solution for food manufacturers (04/04/2011 11:55:54)

Interest in nitrogen gas generation remains high in the food industry, predominantly due to the importance of Modified Atmosphere Packaging (MAP), a technique which helps maintain product freshness, quality and extends shelf-life.

Parker Hannifin Ltd, showcases its latest, innovative gas generation technology at ARABLAB 2011 (04/04/2011 11:51:03)

The analytical gas system products being showcased at this major exhibition include high performance hydrogen, nitrogen and dry air generators, which have been developed to improve the productivity, profitability and sustainability of laboratories working in areas such as life sciences, chemical analysis and spectroscopy.

Yokogawa enhances STARDOM(TM) network-based control system by releasing new modules for power and upstream oil and gas applications (04/04/2011 11:46:32)

Yokogawa Electric Corporation has released a number of new modules for the STARDOM(TM) network-based control system. The new modules include control modules with the high speed and reliability required for small- to medium-size turbomachinery, a frequency input module that can accurately measure the speed of even slowly rotating wind turbine blades, and an upgraded CPU module for oil and gas upstream processes that features improved reliability and greater memory capacity.

New Parker air pressure regulators boost reliability in rail applications (04/04/2011 11:42:15)

Parker Hannifin, the global leader in motion and control technologies, has launched an innovative range of electro-pneumatic air pressure regulators specifically to provide flexibility, precision and energy savings in rail industry applications, including the control of adaptive suspensions. The new EPP3 series has been designed to enhance system performance and reliability, as well as meeting the latest European railway standards, including EN 50155, which govern electronic equipment used on rolling stock

Eriez Introduce New Airless Metal Recovery System (04/04/2011 11:38:16)

Eriez Magnetics Europe Ltd introduces the revolutionary ProSort II Airless Metal Recovery System which helps reduce landfill, re-use metals and save energy. It is designed for the most efficient and economical processing of shredded automobile, co-mingled recyclables, as well as many other resource recovery operations.

Parker Racor leads the way in health and safety and environmental initiatives (04/04/2011 11:33:20)

The Racor Filter Division Europe of Parker Hannifin, the global leader in motion and control technologies, is pioneering the way in environmental responsibility after embarking on a significant recycling scheme in partnership with the National Industrial Symbiosis Programme (NISP), which will see it reducing its waste to landfill by at least 75%. This important development comes at the same time as the company winning the prestigiousAs part of the new environmental initiative, Parker Racor will be working to improve resource efficiency and sustainability, which will enable it to save 40 tonnes of virgin material, as well as cutting CO2 emissions by 103 tonnes. This achievement goes hand in hand with the company's desire to be at the forefront of being environmentally friendly and, just as importantly, safe manufacturing processes. Indeed, as a RoSPA Gold Award winner, the company had to demonstrate the highest possible levels of health and safety standards, combined outstanding risk co

SKF pioneers latest lubrication technology (04/04/2011 11:27:16)

Following a series of highly successful product launches and company acquisitions, such as the VOGEL and Lincoln Industrial buyouts, SKF, the world's leading knowledge engineering company, has now completed a major stage in its strategy to build its global lubrication systems business, which represents a fundamental part of the SKF Group. This latest development sees lubrication systems now forming one of the company's key technology platforms, making it a significant player in the lubrication market to provide quality solutions to companies throughout industry, from the heavy sectors, like steel, quarrying and cement, through automotive manufacturing and specialised applications in food production.

EuroBLECH 2010 exceeds all expectations: Highly international audience is willing to invest again (04/04/2011 11:22:50)

After the EuroBLECH record exhibition in 2008 the sheet metal working industry has had to face difficult times. It was only in the months ahead of EuroBLECH 2010 that the industry showed signs of recovery and the economic outlook was cautiously optimistic again. In this period, EuroBLECH 2010, as the world's leading exhibition for sheet metal working was more than ever the focus of the industry; and expectations, in particular, of the exhibiting companies were high. During EuroBLECH 2010 it became clear that the industry had managed the crisis. Companies reported large increases in business activities and sales, and industry leaders even announced that it was their best exhibition ever.

New Flexible, High Productivity Single Column Materials Tester For Multiple Applications LS1 from Lloyd Instruments features linear guide technology and advanced control software (04/04/2011 11:17:45)

A new single-column materials testing machine from Lloyd Instruments provides enhanced speed, accuracy and flexibility for all materials testing applications under 1kN force. High precision displacement measurement is assured by the Model LS1 instrument's linear guide technology, pre-loaded ball screws and advanced software compensation systems.

Laser technology in medical therapeutics and diagnostics will be featured at LASER World of PHOTONICS (20/03/2011 06:42:17)

Demographic change means that the health care systems in many industrial nations are now confronted with the challenges of an increasingly ageing society. Advances in optical technologies, especially biophotonics and life sciences will help in finding solutions to these challenges. Biophotonics will be one of the focus topics at LASER World of PHOTONICS 2011 and will be represented at both the trade fair and the World of Photonics Congress by a conference and practical subject-related talks.

Very Rugged IP67- Rated Screw Coupling Circular Connectors From Lane Electronics (19/03/2011 06:48:07)

A series of rugged, high reliability screw coupling circular connectors is announced by Lane Electronics, an industry leader for the supply of electrical and electronic interconnection products. Fully approved to BS 9522 F0014, the IP67 rated LMG range is ideally suited for use in any harsh environment where a high resistance to vibration, the ingress of liquids and a very rugged construction are high priorities.

Zero-Max Wind Turbine Couplings Deliver 100,000 Nm Of Torque –Retrofit Models Available And New Designs For OEM Applications (18/03/2011 16:47:11)

Silkeborg, Denmark: Zero-Max, Inc., an ISO 9001:2008 certified design and manufacturing company, announces expansion of its wind turbine couplings covering a broad range of wind turbine applications. Zero-Max Wind Turbine Couplings are now available as an upgrade replacement for existing wind turbines and for OEM applications.

PUTNAM PLASTICS INTRODUCES WIRE REINFORCED MULTI-LUMEN TUBING FOR HIGH PERFORMANCE MEDICAL DEVICES (18/03/2011 16:42:15)

Putnam Plastics, a PolyMedex Discovery Group company, introduces wire reinforced, multi-lumen tubing for minimally invasive procedures that require multiple working channels and high mechanical performance.

Orbitform Earns ISO 9001:2008 Certification JACKSON (18/03/2011 16:40:36)

Orbitform Group today announced that it has received ISO 9001:2008 Quality Management certification for the design and manufacture of orbital forming, fastening, joining, conveyor systems, and assembly equipment.

Detect switch from knitter-switch is robust and tamper proof (14/03/2011 15:50:55)

One of Europe's leading switch manufacturers knitter-switch announces a surface-mount detect switch that has been designed to satisfy a wide variety of applications where any kind of physical movement recognition is important. This includes use as a position switch for movable parts, door contacts, and detecting the presence or removal of a mechanical part in contact with the switch as well as security and alarm applications.

Robot gets to grips with flexible PVC floor tiles (10/03/2011 14:46:04)

Ecotile, a manufacturer and distributor of interlocking floor tiles, has fully automated its manufacturing process using a single FANUC Robotics robot working between two Sumitomo (SHI) DEMAG injection moulding presses. Using advanced gripper design from systems integrator Hi-Tech Automation has allowed Ecotile to overcome handling issues associated with flexible PVC. Two years ago Ecotile made the decision to begin manufacturing tiles which it had previously imported since 1995. High Euro exchange rates, lack of flexibility in design and colour options together with a desire to have greater control over quality and margins were all drivers to begin manufacturing in the UK.

Agilent Technologies InfiniiVision X-Series oscilloscopes offer breakthrough technology at Farnell (09/03/2011 21:59:27)

Live chat with technical expert from Agilent Technologies supports the new scope family at Farnell's element14 community

NEW 2011 PRODUCT RANGE CATALOGUE FROM WELDABILITY-SIF (09/03/2011 21:54:05)

Weldability-SIF, the UK based supplier of MIG, TIG, MMA, Spot and Oxy/Fuel welding and Plasma cutting machines, torches, accessories, consumables and personal protective equipment has launched its 2011 Product Range Catalogue

Don’t Overlook Cabling When It Comes To Fire Safety (09/03/2011 21:43:14)

In a fire, toxic fumes can be just as deadly, if not more so, as the flames themselves – and with this in mind, more and more owners of industrial and commercial buildings, supported by their insurers, are insisting that cabling used should be non-toxic.

Electrolube Welcomes a New Technical Sales Engineer (09/03/2011 21:41:23)

Electrolube, the leading specialist manufacturer of high performance chemicals for the electronics, automotive and industrial manufacturing industries is backing up its promise of future growth and expansion by adding to its senior sales team.

Compact energy saver robot provides high speed spot welder option (09/03/2011 21:38:21)

Continuing its drive for more compact and faster solutions for automated processes, FANUC Robotics has launched a new 'lower energy consumption' 100Kg robot. The FANUC Robotics R-1000iA/100F is designed for high speed handling and in particular for spot welding. The weight saving design of the R-1000iA/100F consumes lower energy levels than conventional spot welding robots. Its slim arm moves 100Kg robots into a more compact class, reducing cell size significantly.

Baker’s first robot boosts oven capacity by 80% (09/03/2011 21:30:54)

A thriving Yorkshire bakery has invested in its first robot system loading and unloading baked products to an oven. Fosters Bakery has increased capacity of a reel oven by 80% and is saving 50% energy costs in the process.

Robots save space at Furniture Components Manufacturer (09/03/2011 21:24:40)

A furniture component manufacturer has successfully integrated two robots onto an existing processing system at its busy Huddersfield facility. Using compact articulated design robots has saved over 50% of the space that would be taken up by conventional wood industry gantry or portal type handling systems.

Robot night shift gives ALM the competitive edge (09/03/2011 21:22:17)

A thriving North East manufacturer of quality washroom cubicle hardware has been able to competitively diversify into subcontract engineering with the help of robotic automation. ALM Products, based in Newton Aycliffe, has installed a FANUC Robotics robot for loading and unloading components to a machine tool.

Smooth ‘go anywhere’ robot solution for machine and system builders (09/03/2011 21:20:13)

A robot that can be mounted in a variety of orientations without modification and with an unobtrusive smooth exterior is the latest offering from FANUC Robotics. The M-10iA/10S is a 6 axes, 10 Kg payload robot with a hollow arm to completely remove tooling cabling from the work area.

Read 1D and 2D Barcodes with the New BVS-E Identification Vision Sensor from Balluff (09/03/2011 21:15:26)

The new BVS-E Identification vision sensor from Balluff checks the markings on your products regardless of whether you label them with 1D codes (barcodes) or 2D codes (Data Matrix codes), reading all common codes on the market. Text and sequences of numbers such as code plain text can be verified using OCV, Optimal Character Verification, the result a simple 'Inspection OK' or 'Inspection not OK'. If you need to view the read code data to find out which parts are being processed you can output via the RS232 or Ethernet interface.

New rental scheme cuts cost of instrument hire (09/03/2011 21:10:55)

The PRP comes at a fraction of the standard rental rate and includes full technical support, making it an ideal option for longer-term rentals or for customers who rent the same instruments frequently. It combines the convenience of ownership with all the benefits of renting – for example, Ashtead Technology remains responsible for maintenance, annual calibration and repairs.

Quick fit endoscope camera speeds image capture (09/03/2011 21:08:49)

A rugged digital camera introduced by Ultrafine Technology has a lens mounted quick release mechanism that enables endoscopes to be quickly attached and released. It makes capturing and storing endoscope images extremely quick and simple.

Conductive coatings offer cost-effective, easy-to-apply method for shielding plastic medical equipment enclosures (09/03/2011 21:02:52)

Chomerics Europe - a division of Parker Hannifin offers a wide range of conductive coatings and paints to address shielding requirements in the growing number of medical equipment applications that utilise plastic rather than metal enclosures. The choice of epoxy, acrylic and urethane coatings are well suited to use in the challenging operating environments often experienced by medical electronics equipment; coating selection depends on the target application material.

Lean approach makes for smooth integration of robotic onion packers (09/03/2011 20:24:01)

A leading packing operation of fresh vegetable produce, has reduced labour requirements by 50% and increased safety for its operators by implementing robotic systems into its facility. With LEAN principles firmly in place, G's Fresh Vegetables Limited has successfully integrated six ABAR robot packing systems into its Cambridgeshire based facility.

Robots make early impact on MASS agreement at BAE Systems (09/03/2011 20:21:14)

A recently commissioned manufacturing facility for the machining of 105mm artillery shells has made an early impact on the aims of the MASS contractual partnership between BAE Systems and the UK MoD. MASS (Munitions Acquisition – the Supply Solution) –aims to deliver increased supplies of ammunition to front line troops by modernising and ensuring sustainability of the UK munitions industry.

Robots control forge variables and double capacity (09/03/2011 20:17:30)

Robots control forge variables and double capacity Fully automated forging of gas turbine compressor aerofoils, from billet to finished forging, is now being undertaken by Rolls-Royce Inchinnan. Two fully integrated systems, each with six FANUC Robotics robots, have doubled capacity and removed the inherent variables of the forging process.

DABU/I AD2T Bridge Amplifier for Exact Force Measuring Chains (09/03/2011 20:03:47)

. With the bridge amplifier DABU/I AD2T, Baumer offers a fail-safe force measuring amplifier for use in challenging industrial environments. The bridge amplifier has an analogue signal path and converts mV/V signals from bridge circuits with strain gauges into a voltage or current (version DABU/DABI) signal. Depending on the type of product, a 2x¼ bridge or a full bridge can be connected to the input of the amplifier. The DABU/I AD2T boasts a bandwidth of 1000 Hz and an excellent signal-to-noise ratio. Its wide tare level of ± 6 mV/V allows for safe and easy implementation of the measuring chain even under difficult assembly conditions. The tare function can be triggered by a control pulse and only takes 5 ms to complete its operation. The amplifier has an input signal range from 0.25…2 mv/V.

Living Water Studios Uses Industrial Water Jet Cutting Technology to Express Faith, Good Humor through Art (07/03/2011 11:08:12)

In a unique fusion of faith, artistry and manufacturing technology, Living Water Studios of Kent, Wash., has found an enduring new purpose for its parent company's industrial water jet cutting machines. These high-tech machines, which normally are abuzz cutting titanium aircraft parts and other components at the Pegasus Northwest water jet shop, have found a second calling sharing the water jet company's Christian faith through stunning works of art.

Companies should take a second look at the way in which they implement condition monitoring procedures, argues Phil Burge, Communication Manager at SKF (02/03/2011 14:59:11)

Condition monitoring, for predictive and preventative maintenance strategies, is widely used throughout industry, with the long term reliability of manufacturing and process systems depending on devices designed to allow plant operators to react to impending failure within the system being monitored.

Altium introducing new component management (02/03/2011 14:52:55)

Next generation component management closes the gaps to manufacturing and beyond

Custom circuit porting capability available with AgO’s AnXplorer (02/03/2011 14:50:54)

AgO Inc extends AnXplorer analog and RF circuit optimisation tool with new algorithms to port circuits between similar technologies

Rittal’s New Cool Efficiency Premium Series (02/03/2011 14:49:05)

Rittal have extended their range of Cool Efficiency cooling units with the introduction of the new Premium Series. Using a powerful comfort controller system that consumes 40 to 50% less energy than the standard Rittal cooling units, the Premium Series is in addition to Rittal's standard TopTherm units. Cooling outputs of 1kW and 2kW are available now with the complete series up to 40kW, being completed in the spring.

telent to upgrade Merseyrail's Long Line Public Address System (02/03/2011 14:44:27)

telent, the technology services provider, has been awarded a contract to redesign and upgrade Merseyrail's Long Line Public Address (LLPA) system across the train operator's 66-station network [Wirral and Northern Lines].

Field Precision releases GamBet 3.0, multicore Monte Carlo software (02/03/2011 14:23:18)

GamBet is a revolutionary software package for simulations of X-ray sources and imaging devices. Version 3.0 features efficient parallel processing and unlimited memory access on 64-bit Windows computers.

INTERALIA PROVIDES SOLUTION FOR BARCLAYS CALL CENTRE (02/03/2011 14:17:34)

Interalia, a leader in the design and manufacture of digital voice announcement solutions, has installed its state-of-the-art XMU+ announcement and call processing system at Barclays Stockbrokers Call Centre in Glasgow. Complimenting Barclays existing IVR (Interactive Voice Response) system. The XMU+ is currently serving a dual purpose of providing call steering as well as business continuity across the non XMU+ based call steering platforms.

New technical brochures from Parker detail (02/03/2011 14:10:17)

Parker domnick hunter, a division of Parker Hannifin, the global leader in motion and control technologies, has published two new technology brochures providing process, plant and maintenance engineers with detailed information on the latest energy saving systems for compressed air.

CRC ENERGY EFFICIENCY SCHEME – HOW DO WE ACHIEVE THESE TARGETS? (02/03/2011 14:07:12)

The CRC Energy Efficiency Scheme, formerly the Carbon Reduction Commitment, is a mandatory UK carbon emissions trading scheme covering organisations that use more than 6,000MWh per year of electricity (equivalent to an annual electricity bill of about £500,000). Operated by the UK Government's Department of Environment and Climate Change (DECC) and aligned to the Energy Act 2008 and the Climate Change Act 2008, the more carbon dioxide a company emits the more allowances it will have to purchase.

shentongroup EXPANDS IN SCOTLAND (02/03/2011 14:01:31)

Recent extreme weather conditions have resulted in powercuts in many parts of the Scotland with many companies being affected by outages, some lasting several days. Power management company, shentongroup, has responded to the increasing demand for standby generators and servicing with an additional facility in Glasgow to compliment its regional headquarters in Edinburgh.

ON Semiconductor Completes Acquisition of CMOS Image Sensor Business Unit from Cypress (02/03/2011 12:58:00)

ON Semiconductor (Nasdaq: ONNN), a premier supplier of high performance silicon solutions for energy efficient electronics, has completed its acquisition of the CMOS Image Sensor Business Unit (ISBU) from Cypress Semiconductor in an all cash transaction for approximately $31.4 million, subject to adjustment under the purchase agreement. The purchase price was approximately 1x annual sales for the division.

Electrolube Exhibits its Newest Products to the Asian Market (02/03/2011 12:53:22)

Electrolube, the leading manufacturer of electro-chemicals, will be exhibiting at Electronica & Productronica China, Booth 1660, to introduce some of its most innovative products designed for the electronics, automotive, rail and industrial manufacturing industries.

Magma’s Titan and FineSim Validated for LFoundry Interoperable Process Design Kits (iPDKs), Accelerating Turnaround Time for Analog/Mixed-Signal SoCs (02/03/2011 12:50:21)

The combination of Magma's Titan and FineSim software and LFoundry's process technology will accelerate development of analog/mixed-signal products, especially for European system-on-chip developers.

Expert monitoring advice available at MCERTS 2011 (02/03/2011 12:48:22)

Process and emissions monitoring specialist ALcontrol will showcase a range of On-Site Services at MCERTS 2011.

Hoffmann + Krippner’s 10.4-inch touchscreen panel PC family supports low-cost, low volume front panel customisation (02/03/2011 12:45:04)

IP65/NEMA 4X-rated industrial touch screen panel PCs suit machine control in industrial automation, food processing, medical, pharmaceutical and automotive manufacturing environments

Cambridge Wireless and Univ. Of Cambridge Eiffel Project announces master class in Wireless Sensing. (02/03/2011 12:09:22)

The Cambridge Wireless Sensing SIG in conjunction with the Univ. Of Cambridge Eiffel Project will be uncovering the secrets to success in Wireless Sensing. This half day free event will be taking place at the Computer Labs, University of Cambridge on the 7th April 2011, and is supported by the Discovering Start-Ups Project, an initiative funded by EEDA to support and showcase start up companies.

ATLANTA Drive Systems Offers Complete Range of Standard Rack & Pinion Drive Systems (24/02/2011 14:58:58)

ATLANTA Drive Systems, Inc. offers a complete range of standard Rack & Pinion Drive Systems , which are available in five levels of precision, including ultra-high precision zero backlash axis drives. They are perfect for a wide range of applications, including axis drives requiring precise positioning & repeatability, traveling gantries & columns, pick & place robots, CNC routers and material handling systems. Heavy loads and duty cycles can also be easily handled with this drives. Industries served include Material Handling, Automation, Aerospace, Woodworking, Machine Tool and Robotics.

ATLANTA Announces Revolutionary New Class of Precision Gear Racks (24/02/2011 14:55:27)

ATLANTA Drive Systems, Inc. is pleased to announce a new class of precision gear racks which offer several significant advantages over traditional gear racks. The "Strong Line" class of gear racks from ATLANTA utilizes an innovative carburized case-hardening process to increase the strength of the rack, including the tooth flanks and root, which maximizes its power density, stiffness and performance. Because of the increased power density, a smaller rack size can often be used compared to traditional gear racks, or performance can be increased on existing systems.

Miniature Medical leadscrew (24/02/2011 14:42:06)

Miniature lead screw designs have often been challenging with regards to application performance verses reliability and cost. A recent medical application supplied by Abssac Limited posed some significant technical obstacles, which were successfully overcome.

New purpose-built facilities for Steatite (24/02/2011 14:37:07)

Steatite, the UK's largest provider of advanced computer-based measurement, automation systems & battery packs for mission-critical applications, relocated their operations to a new self contained purpose built facility located within the Ravensbank Business Park in Redditch, Worcestershire.

Measurement Specialties Releases World’s Thinnest High-Resolution (24/02/2011 14:15:13)

Measurement Specialties releases two new 24-bit ultra-thin digital pressure sensors. These new miniature sensors, with respective heights of one millimeter, were specifically designed for smart phones and other multi-sensor devices.

New CILS-8100R Durable Re-positionable Labels for Temporary Product Labelling (24/02/2011 14:12:12)

CILS Industrial Labelling Division have launched their latest CILS-8100R durable removable labels for temporary 'in-transit' product I.D.

Sensor Solutions for Medical Equipment (24/02/2011 14:10:13)

Measurement Specialties (MEAS) designs and manufactures sensors that measure pressure, force/torque, position, vibration, piezo film, temperature, humidity, optical and even multi-sensor modules that are capable of functioning across different sensor types. We are the heart of numerous medical disposable products and stand alone instruments that provide vital links to the physical world without adding human error. Our business is based on understanding your sensing needs and developing solutions that meet your performance, quality and cost objectives.

Macron Dynamics Utilizes Video, Interactive Media to Showcase Macron in Motion (24/02/2011 14:06:17)

Macron Dynamics, a manufacturer of belt driven linear actuators and multi-axis automation systems, took a new approach to leverage their exposure in the automation industry. The company, which has relied on interactive media for years, turned to online video to showcase their linear actuators and multi-axis gantry systems in real world applications.

CHEMICAL RESISTANT KALREZ O-RINGS FOR TEMPERATURES DOWN TO -42°C (17/02/2011 16:39:21)

High performance chemically resistant Kalrez O-ring seals, which are now available from Dichtomatik Ltd, are rated for operation at temperatures down to -42°C. These products are the latest innovation in the DuPont Kalrez Spectrum perfluoroelastomer range, which has proven capability with over 1800 chemicals, solvents and aggressive fluids while combined with excellent sealing performance and elasticity for operation in freezing cold environments.

HERMLE OPEN HOUSE SCHEDULED FOR APRIL 2011 (17/02/2011 16:36:50)

Maschinenfabrik Berthold Hermle AG will be holding its traditional in-house exhibition again this year at its headquarters in Gosheim, Germany. The gates of the highly innovative production facility will be open for interested professionals to visit from April 13 to 16, 2011.

Innovative flow rate system allows accurate measurement of bulk solids, even in difficult applications (17/02/2011 16:34:04)

The new Triangle system, using innovative field time control technology, is specifically designed to give high accuracy flow rate measurement of bulk solids such as powders and granulates

PlantTriage Diagnostics Automatically Initiate Work Orders (17/02/2011 15:16:10)

ExperTune's PlantTriage can now share information with maintenance planning and other enterprise resource planning (ERP) tools. PlantTriage's diagnostics can be used to initiate work requests for instrument repairs, control tuning, and valve replacements.

Extended VLAN features for IRIS 520/540 SHDSL EFM modems (17/02/2011 14:56:33)

IRIS 520/540 EFM SHDSL modems latest SW/FW version adds comprehensive VLAN configuration possibilities particularly for telecom operators and managed Ethernet service providers needs. Port based VLAN config includes features for VLAN double tagging (Q-in-Q) with selectable 0x8100 and 0x9100 Ethernet types. With the extended VLAN features and MTU (max Ethernet packet size) of 2047 enables even the most demanding operator applications.

SHERBORNE SENSORS REPORTS RECORD GROWTH (17/02/2011 14:54:25)

Expansion in North America and product innovation drive unprecedented global sales

KEMET Expands Polymer Tantalum Capacitor Portfolio (17/02/2011 14:52:11)

KEMET has announced the expansion of its Polymer Tantalum portfolio. The KEMET T528 Low equivalent series resistance (ESR)/ equivalent series inductance (ESL) Series, T521 High Voltage Series and T520 Polymer Tantalum Series all feature new product enhancements.

Molex Purchases Luxtera’s Silicon Photonics-based Active Optical Cable (AOC) Business; Partners on Future AOC Development (17/02/2011 14:36:56)

Molex, a global leader in the high speed interconnect marketplace, today announced that it has completed the acquisition of Luxtera's Active Optical Cable (AOC) business. Luxtera, the worldwide leader in Silicon CMOS Photonics, will transfer all aspects of its existing and future AOC business to Molex including current QSFP+ (Quad Small Form Factor Pluggable) 40Gbps Ethernet and InfiniBand products and customers. The acquisition immediately adds QSFP active optical cables to Molex's portfolio of active optical connectivity products. The acquisition includes an exclusive agreement for Luxtera to develop and supply advanced chip-sets for future Molex products that are based on Luxtera's silicon photonics technology, including next generation 14Gbps and four channel 25Gbps products for the 100Gbps Ethernet and InfiniBand markets. The companies will work together on future product planning to provide customers with leading edge interconnect solutions at 10Gbps, 14Gbps, 25Gbps, and faster d

BOS 23K – A bright idea – the new standard in optical object detection (17/02/2011 14:29:53)

With their new BOS 23K family of sensors, consisting of through-beam, retro-reflective, diffuse and background suppression models, Balluff has set new standards in optical object detection. Visible red light and laser versions for precision alignment, together with long ranges and compact uniform housing styles ensure great freedom in equipment design and at a favourable price/performance ratio.

Broad Range of Customized Schroff Brand Front Panels Available in as Few as Five Days (17/02/2011 14:27:48)

Pentair Technical Products announces the Schroff brand Front Panel Express service, offering fast prototypes-to-production cycle time. Through the Front Panel Express program, 5 to 50 front panels modified with custom cut-outs, handles and silk screen are available in as few as 5 days.

Mini-Hexapod from PI: Six-Axis Motion in Vacuums up to 10-6 hPa (17/02/2011 14:25:31)

In vacuum chambers, there is very little installation space for applications. Since the object to be moved is not permanently accessible, a flexible placement of the load (e.g. a sample) is particularly important.

INTRODUCING ENERPAC’S NEW E326e INDUSTRIAL TOOLS CATALOG (17/02/2011 12:26:41)

Enerpac is proud to announce the release of our new Industrial Tools catalog, E326e — providing a complete range of quality high-force tools for all industrial applications.

Renesas Electronics and Green Hills Software collaborate to jointly develop basic software for CPU virtualization technology enabling real-time control (17/02/2011 12:20:41)

Renesas Electronics Corporation (TSE: 6723), a premier provider of advanced semiconductor solutions, and Green Hills Software, Inc., the largest independent vendor of embedded software solutions, has announced its collaboration to jointly develop basic software supporting CPU virtualization technology suitable for real-time control applications as well as a software development environment.

Balluff BML Magnetic Linear Encoder systems – the solution for many applications (17/02/2011 12:09:53)

Balluff's BML Magnetic Linear Encoder system consist of a sensing head and magnetically encoded tape making a highly precise, fast-response and very rugged measuring system. As the system works magnetically, in contrast to optical systems it is very insensitive to contamination from oil, dust etc. These characteristics make it ideal for use in harsh, dusty industrial environments.

Solutions for industrial machine frames, guards and protective screens (17/02/2011 12:06:48)

Aluminium profiles are robust, reconfigurable and extremely adaptable and meet the requirements of most types of machine guards, protective screens and machine frames.

New Balluff solution reduces Total Cost of Ownership - Condition Monitoring with DSC Sensors (17/02/2011 11:40:25)

Proactive maintenance offers enormous potential for cost savings and having equipment and machines with this feature provides significant competitive advantages. Reliable function diagnostics is especially important in high-dynamic machines, used for example in the printing and paper industry. With their Dynamic Sensor Control (DSC), sensor specialist and networking provider Balluff offer a completely new and cost-effective way to detect quality deviations in the manufacturing process in real time indirectly through the sensors. Here Balluff boasts not only a complete portfolio of inductive, capacitive and photoelectric sensors, but also the matching full range of connectivity and networking products.

FREE Interactive Safety Workshops from Laidler Associates (17/02/2011 11:37:11)

Laidler Associates, the market leader in machinery safety is running a series of short machinery safety seminars that are free for delegates to attend.

EIC partners with EDT to support Business/Education links (17/02/2011 11:34:31)

The EIC, the leading trade association for UK companies supplying goods and services to the energy industries worldwide is teaming up with educational charity EDT in recognition that more needs to be done to encourage students to move into science, technology, engineering and maths (STEM) careers.

Very Low Profile Illuminated TACT Switch Offers High Quality User Experience (17/02/2011 11:23:54)

Foremost Electronics, the Essex based specialist distributor of electromechanical components, announces the availability of the Marquardt 3006 series of low profile, short-travel, LED Illuminated TACT switches.

New Red Lion Sales Presence in Germany Focuses on Local Service with Global Support (17/02/2011 11:05:20)

Red Lion Controls, Inc. announces a new sales office in Sprockhövel, Germany. Red Lion's full line of industrial control solutions—including HMI products, process controls, panel meters, sensors and software—were previously available in Germany through the company's broad distribution network. Red Lion has added local sales support to the previous sales structure in Germany, further embracing, expanding and showing commitment to the German market.

Davall Stock Gears introduction to Torque limiters. (17/02/2011 10:58:17)

All rotating systems have energy (inertia) to cause significant machine damage during a system overload. This inertia varies, based on the RPM and rotating mass for each application. A rotating mass made to stop suddenly, may cause machine damage, and a large mass rotating at a slow speed (RPM) has the potential to do more damage than a large mass rotating at a high speed. Overload devices are employed as a mechanical fuse, to protect machines, and permit the energy to dissipate, without causing excessive damage. At low speeds, systems can develop unnecessary twisting power, torque. In the advent of a failure this torque can damage expensive drive components (Shafts, Gearboxes, Chain, Couplings...), or be situated in a location which leads to prolonged production down time.

Shentongroup LAUNCHES DUAL FUEL WASTE TO ENERGY SYSTEM (17/02/2011 10:50:10)

Pioneering, power solutions company, shentongroup, is launching a state-of-the-art dual fuel waste to energy system called Duplo™. As well as being a prime power source, Duplo™ can also provide hot water via an optional heat exchanger and be fitted with a control system that enables excess electricity to be exported to the National Grid.

Position Sensors feature EtherNet/IP Interface (17/02/2011 10:46:45)

MTS has further expanded its range of available interfaces by developing Temposonics® R-Series position sensors compatible with EtherNet/IP devices. By offering this interface, the new sensor models enable connec¬tivity with a large installed base of control devices. The EtherNet/IP implementation features DLR (Device Level Ring) technology to provide high-speed, high-per¬formance communication along with rapid network recovery.

Formal Partnership seals the deal (17/02/2011 10:41:43)

SPG, ERIKS UK's Gasket Technology Centre, is proud to announce its formal partnership with premier European gasket sheet manufacturer Frenzelit GmbH. The formalisation of the partnership cements the existing strong working relationship between Frenzelit and the wider ERIKS Group, providing customers with increased availability and comprehensive technical support.

Wall Mounted True On-Line UPS System From Powersolve Is Ideal For Outdoor Applications (16/02/2011 17:43:47)

Powersolve's WM Series of Uninterruptible Power Supplies (UPS) is designed for use in industrial and commercial applications where a wall mounted unit capable of withstanding the ingress of dust and moisture is required or recommended.

knitter-switch - miniature latching pushbutton is rated at 3A (16/02/2011 16:24:03)

knitter-switch, recognised by many as one of Europe's leading switch manufacturers, announces a new versatile pushbutton switch designed to suit a wide variety of applications where a reliable single pole-double throw (SPDT) latching switch function is required.

THERMAL ENERGY RECEIVES PURCHASE ORDERS FROM A MAJOR FOOD MANUFACTURER (12/02/2011 17:42:25)

Thermal Energy International has announced that it has received purchase orders totally £374,167 ) from a major food manufacturer based in the UK, to provide GEM® condensate return systems for use at 5 of its manufacturing sites. The GEM&#61650; steam traps should be shipped and the revenue recognised over the next 3 months.

INTERALIA - A LEADER FOR OVER 30 YEARS IN PA/VA (12/02/2011 17:36:39)

Interalia Communications is a well-established name in the field of digital voice announcing and communications in the transit industry. Founded in 1975 in Calgary, Alberta in Canada, Interalia has been fundamental in enhancing the digital audio market by utilising and developing new technology. Interalia has established long term working relationships with some of the largest and most respected names in the PA/VA equipment field such as Baldwin Baxall, TG Baker, Laauser & Vohl, Milbank & ASL.

Renishaw appoints dental technology specialist for its Nordic operation (12/02/2011 17:31:34)

The Nordic office of Renishaw plc, global specialists in industrial metrology and precision healthcare solutions, has announced the appointment of Martin Wadman as a System Support Engineer for its rapidly expanding dental business. Wadman has more than 15 years experience in the dental industry with Nobel Biocare, and in his new role at Renishaw AB, in Järfälla, near Stockholm, Sweden, he will be responsible for helping to support the company's growing base of dental CAD/CAM products.

Toumaz launches ‘TELRAN’ TZ1053 – ultra-low energy radio for wireless sensor networks, environmental monitoring and smart metering (12/02/2011 17:28:54)

Toumaz, the leading provider of ultra-low power wireless telemetry technologies for medical monitoring and internet-connected consumer devices, today announces the launch of TZ1053 TELRAN – an ultra-low energy (ULE) radio for wireless sensor networks, remote controls, green energy solutions, smart meters, and environmental monitoring. Built on Toumaz's proprietary AMx™ Mixed Signal technology, the high-performance sub-1GHz radio SoC offers 1V operation using a single button cell battery and consumes less than 3mW continuous use power consumption.

TraceParts Online 3D Catalogs Freely Available to All SpaceClaim Users (12/02/2011 17:23:56)

TraceParts, a leading digital engineering 3D content company, and SpaceClaim, the leader in 3D Direct Modeling for engineering design, today announced the launch of an extensive online parts library seamlessly integrated with SpaceClaim's 3D design software. This new online resource is the first of its kind to deliver native SpaceClaim models from hundreds of part catalogs commonly used in the Machinery, Tooling, Automotive and Aerospace industries.

IDT INTRODUCES INDUSTRY’S FIRST SINGLE-LAYER MULTI-TOUCH CAPACITIVE TOUCH SCREEN CONTROLLER (12/02/2011 17:20:45)

PureTouch™ Controller IC Offers High-Performance, Multi-Touch Gesture Capability Optimized for IDT's Single-Layer Touch Screen Technology

Blue Diamond adds style and finish to fixings (12/02/2011 17:16:26)

When you are a leading supplier of sliding wardrobe systems together with window and door products to the new build industry, ensuring you have a reliable supplier of glass door handles, hinges and latch systems is critical to your business. So when supplies started to falter, fast action was required to find an alternative supplier.

Eaton iProx Sensor Series. Eaton’s Electrical Sector is launching a new iProx inductive sensor series that embodies both power and versatility. (12/02/2011 17:10:11)

Thanks to an integrated microprocessor and the unique Smart SenseTM technology, each iProx sensor has a large detection range and intelligence that can be adapted to each application. Cylindrical devices with switching distances of up to 29 millimeters are available, twice the switching distance of other inductive sensors of the same size.

Electrolube Welcomes a New Technical Sales Engineer (12/02/2011 17:08:16)

Electrolube, the leading specialist manufacturer of high performance chemicals for the electronics, automotive and industrial manufacturing industries is backing up its promise of future growth and expansion by adding to its senior sales team.

MCERTS 2011 workshop programme announced (12/02/2011 17:04:36)

The organisers of MCERTS 2011 (Telford, 30th and 31st March) have announced the workshop programme to run alongside the event's main conference and exhibition.

Modular MES System Controls €50m Czech Lonza Biotec Plant (12/02/2011 16:58:20)

FELTEN PILOT® MES/WDS WEB-BASED PRODUCTION MANAGEMENT AND WEIGHING SYSTEM CONTROLS FERMENTATION PLANT AT LONZA BIOTEC

Retrofits & Refurbishments – A Bumper Quarter! (09/02/2011 14:40:28)

In these challenging economic circumstances, where in some cases capital equipment spend has sometimes been difficult to justify; Chronos BTH supplied retrofit and refurbishment projects have allowed ten (10) companies to upgrade equipment and thereby make the maximum use out of their existing systems.

National Semiconductor Revolutionizes Design of Sensor Systems (09/02/2011 13:50:04)

National Semiconductor Corp. (NYSE:NSM) today introduced two configurable sensor analogue front-end (AFE) integrated circuits (ICs) with unique technology that work together with new tools to fast-track signal path designs for a variety of sensors from major global manufacturers.

SHERBORNE SENSORS KEEPS ZED TUNNEL GUIDANCE ON TARGET WITH DELIVERY OF INCLINOMETERS (09/02/2011 13:47:13)

T233 Series maintains optimum accuracy in the toughest industrial environments Sherborne Sensors, a global leader in the design and manufacture of sensors for military, aerospace and industrial applications, today announced that it has successfully delivered its T233 gravity-referenced servo inclinometers to ZED Tunnel Guidance, for application in its Tunnel Boring Machines (TBMs).

Ben Heck helps boost battery life for Android phones with a new kinetic motion wind-up charger in the latest episode of element14’s “The Ben Heck Show” (09/02/2011 13:42:28)

Online TV series hits million-view milestone giving engineers, enthusiasts and DIYers entertaining insight into modding inspiration, practice and culture

Arrow plays key role in development and manufacture of projectiondesign® ultra-high resolution DLP® projector (01/02/2011 16:49:17)

Engineering and supply chain services are behind availability of WQXGA (2560 x 1600 pixel) resolution projector for simulation, training and visualization markets

Chronos BTH and APF present state-of-the art Packaging Systems at the AUSPACK PLUS, Melbourne, March 22nd – 25th, 2011 (01/02/2011 16:46:42)

Chronos BTH, represented by APF (Australian Prime Fibre Pty Ltd), will take place at this year's AUSPACK PLUS at the Melbourne Convention & Exhibition Centre. APF exclusively represents Chronos BTH – Premier Tech's packaging products in Australia and New Zealand.

GOODS LIFT OR FORK LIFT? (01/02/2011 16:40:02)

Many companies are now turning to simpler goods lifts such as the Mezz Lift manufactured by Penny Hydraulics. Robust and built solely for industrial applications, this does not require a floor pit and allows easy access. Its hydraulic control equipment is typically mounted to the side of the installation without the need for a separate motor room. One of the principal limitations of other types of goods lift is therefore avoided this coupled with its fully enclosed, self supporting structure means that it can, if required, be relocated more easily.

Pioneering Engineering firm Gordon Murray Design selects HyperWorks to develop the T.25 City Car (01/02/2011 16:36:32)

Altair's HyperWorks CAE technology assists the development of a light weight and fuel efficient city car

OPC Training Institute Announces Training Promotion for National Engineering Month (01/02/2011 16:34:35)

The OPC Training Institute, the global leader in OPC Training for automation professionals, has announced a training promotion for National Engineering Month to support all Canadian Engineers.

Meggitt Sensing Systems Introduces “Endevco® Acoustic Measurement Products Selection Guide” (01/02/2011 16:30:50)

Meggitt Sensing Systems, a Meggitt group division, has announced the global release of its new "Endevco® Acoustic Measurement Products Selection Guide", a single comprehensive product specification resource, detailing Meggitt's complete range of Endevco® acoustic sensors and instrumentation for automotive NVH, cabin noise, vibro-acoustic testing, appliance noise evaluation, environmental noise analysis, building acoustics, appliance noise evaluation, wind tunnel testing and other critical measurement applications.

Ethernet Direct Announces Series of Industrial Networking & Communications Roadshows in Australia (01/02/2011 16:28:56)

Ethernet Direct Corporation, a professional and primary provider of industrial networking and communication solutions, is pleased to announce a series of industrial networking and communications road shows in Australia.

Ethernet Direct Unveils Facts In Selecting The Right Industrial Rated IP67 Switch (01/02/2011 16:23:18)

Ethernet Direct Corporation, a professional and primary provider of industrial networking and communication solutions, is pleased to share the facts on how to choose the right IP-67 switch for mission critical applications.

The event for Aerospace & Defence Industries returns to The RAF Museum. (01/02/2011 16:13:26)

This popular conference & exhibition provides an excellent international forum for sharing surface finishing knowledge and best practise techniques for sustainable aviation and defence materials technology.

EUROPEAN COMMISSION PRESIDENT BARROSO VISITS FESTO (01/02/2011 16:09:50)

- Strengthening EU locations with innovation, technology, education and knowledge

TECHNOLOGIES OF THE FUTURE AT THE 7TH ALUMINIUM TWO THOUSAND CONGRESS 2011, IN BOLOGNA, ITALY (01/02/2011 16:04:26)

Along with the motto "Let's build the future of the aluminium world together" there is good news from the aluminium world: the Aluminium Two Thousand Congress features the technologies of the future, presented by experts from 25 different countries (Algeria, Austria, Brasil, Canada, Croatia, Denmark, Egypt, France, Germany, Greece, India, Italy, Liechtenstein, Norway, Poland, Russia, Slovenia, Spain, Sweden, Switzerland, The Netherlands, Turkey, U.A.E., U.K., U.S.A.). Compared to the previous 6 editions of the Congress there will be a record number of presentations (106). The absolute high quality and innovation of the contents allow to easily foresee the great success of the 7th World Congress Aluminium Two Thousand that will take place in Bologna from May 17th to May 21st, 2011.

Chronos BTH and APF present state-of-the art Packaging Systems at the AUSPACK PLUS, Melbourne, March 22nd – 25th, 2011 (31/01/2011 12:14:03)

Chronos BTH, represented by APF (Australian Prime Fibre Pty Ltd), will take place at this year's AUSPACK PLUS at the Melbourne Convention & Exhibition Centre. APF exclusively represents Chronos BTH – Premier Tech's packaging products in Australia and New Zealand.

LeCroy Introduces 200 MHz – 1 GHz WaveSurfer Oscilloscopes with Class Leading Memory and Sample Rate (31/01/2011 11:58:06)

New WaveSurfer MXs-B Features 25 Mpts Memory and 10 GS/s Sample Rate in a Small Footprint Format

KIOWA WINS FESTO ‘PREMIER STOCKIST OF THE YEAR’ AWARD (25/01/2011 16:01:57)

Fluid power specialist Kiowa has won the prestigious Festo 'Premier Stockist of the Year' award for outstanding performance in 2010. The award is presented to the company within the Festo Premier Stockist network that shows the best sales growth of Festo products for the year, combined with demonstrable gains in operational efficiency – evidenced by over 90% usage of the Festo on-line shop – and the highest level of commitment to strategic campaigns.

Electrical and Fluid Engineering now in 3D with EPLAN Pro Panel (25/01/2011 15:58:55)

Offering exact planning reliability EPLAN Pro Panel allows the definition of a virtual 3D prototype of the mounting layout – independently of the electrical or fluid schematic. Mounting panels, housings or enclosures can be dimensioned optimally so that the costs are reduced. Consistent data for all the participating engineering disciplines ensure that the workflow towards the production is also efficient. Last but not least EPLAN Pro Panel provides added value to the complete engineering process.

Meggitt Sensing Systems Introduces General Purpose Low-Mass Endevco® Triaxial Piezoelectric Accelerometer (25/01/2011 15:47:44)

Meggitt Sensing Systems, a Meggitt group division, has announced the global market introduction of the Endevco® model 2228C, a rugged low-mass triaxial piezoelectric accelerometer, designed to suit a variety of general vibration testing requirements. The versatility and performance characteristics of the model 2228C allow it to be used in R&D, metrology, lighting systems, wireless equipment, space shuttle and solid rocket booster electronics assemblies, helicopter engines, combustion turbines and vacuum pump applications, among others.

Renold Achieve ISO 14001 (25/01/2011 15:45:44)

Renold Hi-Tec Couplings of Halifax, England, have been awarded the ISO 14001 - Environmental Management System (EMS) - standard.

INMOCO LAUNCHES EXLAR RANGE OF FORCE MEASURING LINEAR ACTUATORS (25/01/2011 15:43:14)

Inmoco is offering selected models of its Exlar GSX range of linear actuators with an integral force measuring capability, for use in a host of applications including Fastening and Joining, Riveting, Bag Sealing, Thermoforming, Welding, Clamping, Testing, Tension Control - and many more.

Fast Piezo Focusing Systems to be introduced at BIOS: Digital and more Affordable (25/01/2011 15:39:25)

San Francisco, CA -- Piezo systems specialist PI introduces a new, more affordable series of Fast Piezo Focusing devices at the 2011 BIOS (Biomedical Optics) meeting, the world's largest and most prestigious international biomedical optics and imaging conference, held in conjunction with SPIE's Photonics West.

All-Fill’s load cell selection ensures accuracy for its range of filling machines (25/01/2011 15:35:46)

Leading UK manufacturer, All-Fill International Ltd has selected HBM's PW12C 75 kg capacity load cell and AD103C Analogue to Digital Convertor (A/D) card for its latest sack filling machine. This ensures the accuracy of the machine meets the specification of up to ±0.1% of the fill weight. The machine is designed for filling 25kg sacks but All-Fill International decided it needed a bigger load cell to meet different customer specifications.

SC21 leader AWS Electronics Group speaks at IAQG conference (25/01/2011 15:32:35)

Aerospace primes given a perspective on quality from key EMS provider.

‘A breath of fresh air – award winning Breezair ensures environmental success for DHL’ (25/01/2011 15:29:18)

Swine Flu was the world's most talked about and feared pandemic for decades, claiming the lives of over 12,000 people worldwide. Now the panic has died down we look to future precautions and how, with the support of businesses, we can help maintain safety levels across the UK.

Meggitt Sensing Systems Launches New Endevco ½” Free-Field Microphone and Preamplifier Set with TEDS Capabilities (25/01/2011 15:26:30)

Meggitt Sensing Systems, a Meggitt group division, has introduced the Endevco® model EM46AE, a combined 1/2" free-field pressure microphone and iTEDS enabled preamplifier (per IEEE 1451.4) set, designed for general purpose and larger channel count precision acoustic measurements within a variety of applications, including vehicle pass-by noise testing; environmental noise analysis; building acoustics; and appliance and other consumer product noise evaluations.

Gear units for great tasks: NORD drive solutions from 20,000 to 200,000 Nm (25/01/2011 15:20:57)

Bargteheide – As a major supplier of large gear units, NORD Drivesystems offers high-performance industrial power transmission solutions for elevated torque and power ratings. With several years of experience across all industry sectors, NORD application experts help users to choose and adapt suitable drive systems.

ZEMIC's BM14G4 load cells now have OIML approval for legal-for-trade weighing across full range (25/01/2011 15:15:14)

• Heavy duty load cell suits truck scales, hoppers and train weighing applications

– igus Heavy Duty Energy Chains (25/01/2011 12:46:18)

Specialised polymer materials endure extreme environments

Trio Motion adds EtherCAT interface expansion module to MC464 Motion Coordinator (25/01/2011 12:41:04)

• EtherCAT provides one of the fastest systems available – well suited to high speed, multi-axis motion and machine automation • Open standard EtherCAT further increases customers' freedom to select from a rapidly growing list of manufacturers motor and drive combination

SENSOR TECHNOLOGY HELPS TO KEEP SHEEP SHORN! (25/01/2011 12:37:33)

The speed with which sheep shearers can have an animal shorn is a marvel, made possible by ever-developing technology. TorqSense transducers from Sensor Technology are playing an important role in new product development at Gloucestershire-based Lister Shearing, the oldest and one of the most successful suppliers of animal shearing and clipping equipment in the world. The sensors, which are based on SAW (surface acoustic wave) technology, are being used by the company as an aid to evaluating the performance of miniature electric motors.

element14’s Ben Heck Show reaches 1 million viewers; bringing science, art and design together to the world of ‘mods’ (25/01/2011 12:22:28)

– element14, Premier Farnell's innovative online technology resource and community for electronic design engineers announces that The Ben Heck Show, featuring modding guru Benjamin J. Heckendorn, a.k.a. Ben Heck, has registered 1 million viewers since its launch just four months ago. "The Ben Heck Show" is an informative and entertaining online television series dedicated to the science, art and mindset of system and hardware modders. Hosted by Benjamin J. Heckendorn, widely regarded as one of the most talented and innovative game console modders around the world, "The Ben Heck Show" is a bi-weekly online television series that spotlights Ben's modifications of popular electronic devices. Ben rings in the New Year with his all-new, custom pinball machine build in the latest "The Ben Heck Show" episode. He kicks things off by installing a new CNC router in his workshop to gear up for another year of modding mayhem, and takes a closer look at programming embedded processors with the popu

Zymit® Low-Foam's Natural Enzymes Conquer Difficult Cleaning Challenges (25/01/2011 12:18:42)

Burlington, New Jersey, USA: Zymit Low-Foam is a synergistic duel-enzyme and detergent formula that specifically target and remove protein- and starch-based soils. The enzymes break down dirt, and the detergents gently wash it away. In some cases, Zymit Low-Foam will even deodorize. With a typical pH (neat) of 6.9 to 8.4, Zymit Low-Foam is almost as mild as ordinary water.

Crouzet's New Brushless DC Gearmotor with Integrated Gearbox Offers (25/01/2011 12:15:51)

Crouzet North America, a company of Custom Sensors & Technologies, has introduced the new 801 Series Brushless DC Gearmotor with integrated Gearbox and electronics. The new all-in-one solution offers versatile control for speed and torque in a compact, sealed package. With no brushes to wear out, it is well suited for medical equipment, lab automation and industrial applications where long product life and reliability is paramount.

ISA Welcomes New President, Leo Staples (25/01/2011 12:13:34)

The International Society of Automation (ISA) welcomes H. L. "Leo" Staples as its 2011 president. Staples opened the year with a call-to-action to all ISA members to dedicate themselves to a high level of involvement in, and collaboration among, their sections, divisions, and the Society. "We have exciting, yet tough, challenges ahead of us, just as any great association does," he said. "I believe that, with passion, dedication and focus, we can meet our new goals and create a very bright future for ISA." Describing his vision for ISA for 2011, Staples cited four challenges identified by ISA's Strategic Planning Department that he wants the membership to focus on.

NVision's HandHeld Scanner Helps Keep USAF Planes Combat-Ready (25/01/2011 12:11:24)

Engineers and machinists at several United States Air Force (USAF) bases are now using NVision's HandHeld laser scanner to reverse engineer complex aircraft parts, which are then machined to the highest level of accuracy and installed, maintaining USAF planes in peak working condition. Reverse engineering is often required for aircraft that were originally designed without computer aided design systems (CAD) and for which even blueprints can be very difficult to obtain.

Next Generation SST DN4 DeviceNet Network Interface Cards from Molex (25/01/2011 12:06:32)

Molex Incorporated introduces its fourth-generation SST™ DN4 high-performance DeviceNet* network interface cards (NICs), which use an enhanced FPGA (field programmable gate array) design to extend reliability and performance. Ideal for real-time control and data acquisition applications, which range from PC control and HMI/SCADA systems, to robotics, network configuration, troubleshooting and diagnostic tools, the Molex DN4 family of DeviceNet NICs provides industrial OEMs and end-users with a more reliable and cost-effective solution for industrial communication.

SIMPLE NEW MULTI-TEST SYSTEM (25/01/2011 11:15:26)

Hygiena International Ltd launches the EnSURE; a small portable rapid detection system that can make several different test measurements using a new bioluminogenic test principle. The tests include Micro-Snap, Zymo-Snap and Super-Snap.

New task-based, document-centric calculations environment improves personal and engineering process productivity. (25/01/2011 11:01:58)

PTC (Needham, MA), the Product Development Company®, has announced Mathcad® Prime 1.0™, the next generation of the company's best-in-class engineering calculation software. The powerful capabilities of Mathcad, coupled with its open architecture and easy-to-use live mathematical notation functionality, allows engineers and organisations to streamline critical design processes. Mathcad Prime 1.0 delivers a new task-based user interface – enabling engineers to focus on developing engineering calculations rather than formatting design documents.

Powerful New 24 Volt DC Gearmotor Develops 543 LB-IN. Torque at 32 RPM (25/01/2011 10:53:42)

Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, WITH INTEGRAL FAILSAFE BRAKE, the Model No.MMP-D33-455D-24V GP81-124 BR-015. Accepting any 24 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 12" long (Brake included) and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C.

A New Series of Metric Involute Splined Shafts & Bushings from QTC Feature Thermal Refined Teeth (25/01/2011 10:47:22)

A new Series of module 1.667 involute splined shafts & bushings from Quality Transmission Components (QTC) feature thermal refined heat treatment to ensure good abrasion resistance. These splined shafts & bushings, identified as the SV... Series are stocked in carbon steel with a tooth hardness of 225~260HB.

Molex Unveils Brad SST PB3 Remote Module;Designed to Bring PROFIBUS Connectivity to Rockwell Logix Controllers (25/01/2011 10:43:48)

Molex Incorporated announces the development of the new Brad® SST™ PB3 Remote Module for PROFIBUS*. This stand-alone hardware platform includes PROFIBUS and Ethernet communication ports, enabling fast and easy connectivity to any Rockwell ControlLogix® and CompactLogix® controller. The PB3 module, which will be available next year, features a unique remote design that enables it to be installed close to the PROFIBUS field device, reducing the expensive cabling costs that can occur when the controller and field device are in different locations.

HERTFORD SUBCONTRACTOR HOSTS MINISTER'S FOURTH DAY OF 'WORK EXPERIENCE' (25/01/2011 10:30:18)

Business and Enterprise Minister, Mark Prisk, who is also Conservative MP for Hertford and Stortford, spent most of Thursday in his local constituency learning about the rewards and challenges of SMEs (small and medium sized enterprises) in the precision turned parts manufacturing sector.

HYDRATIGHT OFFERS POWER-TO-GO (25/01/2011 10:28:22)

DL RICCI-brand machining tools from Hydratight have always been leading edge; now they have leading-edge hydraulic power units to go with them.

OPC TRAINING INSTITUTE RELEASES 2011 TRAINING SCHEDULE (25/01/2011 10:19:46)

The OPC Training Institute , the global leader in OPC Training for automation professionals, has released the (2011 Winter-Spring Training Schedule).

SEVEN HURCO MACHINING CENTRES IN FIVE YEARS SECURE TOOLMAKER'S SUCCESS (25/01/2011 10:17:18)

Start-up business powers ahead through the downturn

Meggitt Sensing Systems Introduces Endevco® High-Sensitivity Absolute Pressure Transducer Series (25/01/2011 09:22:17)

Meggitt Sensing Systems, a Meggitt group division, has introduced the Endevco® model 8530C series, a family of high-sensitivity piezoresistive absolute pressure transducers, offering high output and a non-linearity of 1% at 3x over-range in a highly compact (3.86 mm face diameter) package.

Marsh Bellofram Introduces New Solid-on LED (25/01/2011 09:19:13)

The Diversified Electronics division of Marsh Bellofram Corporation, a member of the Marsh Bellofram Group of Companies, has announced the global market introduction of the UPA-130S series. This newest addition to the popular Marsh Bellofram UPA-130 series, the "S" model, is designed to provide solid-on LED lighting and alert capabilities for those monitoring applications requiring enhanced NFPA70E and OSHA safety compliance, instead of the flashing LED's found on the standard model.

HCD launches new ‘design & build’ partner website (25/01/2011 09:16:00)

HCD, the Letchworth-based contract electronics manufacturer, has recently launched a new web site designed to more accurately reflect the complete capabilities of the company which now offers a full range of services from PCB design, through DFM, PAB assembly, cable assembly, box build and full test.

Meggitt Sensing Systems Announces Endevco® (25/01/2011 09:12:55)

Meggitt Sensing Systems, a Meggitt group division, has announced that the Endevco® model 2222C was the company's top-selling piezoelectric accelerometer of 2010.

3DScanCo To Resell Low-Cost, Portable Artec™, Creaform, and 3Shape Laser Scanners (25/01/2011 09:06:32)

3DScanCo (a division of Laser Design, Inc.) announced that it is now reselling easy-to-use, low-cost Artec™, Creaform, and 3Shape 3D scanners. The addition of these new low-cost lines of 3D scanners improves 3DScanCo's ability to provide the appropriate scanner to their customers and makes the company a leading reseller of quality economy and portable 3D scanning systems.

Overhead Cranes Build Next Generation London Overground Trains (20/01/2011 10:39:18)

Street Crane Company is playing a vital role at Bombardier's Derby factory in the building of new trains to revitalise the capital's commuter services.

NEW VERSION OF iProMOH IS IDEAL FOR PUBLIC ANNOUNCEMENTS (20/01/2011 10:32:22)

Interalia, has launched a second version of its highly acclaimed iProMOH advanced promotional on-hold music/message announcement system. The iProMOH2 has an additional port and is thereby able to provide two solutions in one. It is a digital announcer that can entertain and inform on-hold callers and also a public address-messaging device for broadcasting music and/or messages to store patrons, via an existing PA System.

GEM steam traps stop mechanical trap failure & reduce condensate return pressure by 51% at KNPC Shuaiba refinery (20/01/2011 10:24:54)

Keeping on top of the constant challenge of repairing and replacing thousands of mechanical steam traps is no longer a problem at KNPC's Shauiba Refinery in Kuwait following the successful conversion of 1,750 mechanical traps to Thermal Energy International's award winning GEM Venturi Orifice design. In addition, KNPC, a subsidiary of the Kuwait Petroleum Association, has seen the HP hot condensate header pressure drop from highs of 175 psig to just 90 psig.

RICHMOND VILLAGES MAKES STRATEGIC DECISION TO CONTRACT WITH POWERCALL UK (20/01/2011 10:16:25)

Aware its luxury retirement communities could suffer powercuts from troublesome power supplies, Richmond Villages, part of the Barchester Group, has contracted with power-support company, shentongroup's Powercall UK for provision of its unique generator callout service for its villages in Nantwich, Coventry, Northampton and Painswick.

Sherborne Sensors Appoints X Tronics as Exclusive Representative in Canada (20/01/2011 10:07:47)

Leading Sensors Manufacturer Boosts Local Presence and Positions for Further Expansion Across North America

Rittal outdoor enclosures take charge (20/01/2011 10:04:01)

Building on their extensive experience in providing weatherproof enclosures for a wide range of applications around the globe, Rittal has developed some prototypes for the emerging market of charging stations for electric vehicles.

SmartKem Awarded Grant from Welsh Assembly Government (20/01/2011 10:00:35)

SmartKem Ltd, the developer of novel printable semiconductor materials for flexible electronics today announced that the Welsh Assembly Government has awarded the company funding to further develop its flexible printed electronics solutions.

Plug-and-play connection of CAN bus devices to PCs via USB (19/01/2011 14:51:25)

EasySYNC Ltd has announced two new USB-to-CAN adapters that provide a fast and easy way to connect CAN bus devices to a PC via USB. The USB2-F-7001 is a non-isolated adapter, while the USB2-F-7101 features built-in digital isolation. Both devices are powered directly from the USB connection eliminating the need for an independent power supply.

MAPAL win prestigious award for innovation (19/01/2011 14:48:39)

MAPAL, the world's largest specialist supplier of machining solutions for cubic solutions has won the prestigious 2010 Supplier Award for Best Innovation Performance from ZF Friedrichshafen AG, a globally renowned expert in the development and manufacture of driveline and chassis solutions for the automotive industry. The award is one of only five made this year by ZF Friedrichshafen to its best performing suppliers.

Harland Simon maintains its partnership with the major UPS manufacturers and in 2010 became a VAR for Emerson. (19/01/2011 14:44:53)

As with Janus symbolising change and transitions such as the progression of past to future, Harland Simon reflects on its success last year and continued growth into 2011. We'd also like to pass on our thanks to all our customers and wish you all a Happy New Year.

Trend the Process on Your Mobile Device (19/01/2011 14:40:57)

ExperTune's PlantTriage now provides real-time trending of process variables on your mobile phone. Live data from a control system is relayed to your cell phone's browser. This feature allows users to have immediate access to control-room data, even when working remotely out in the plant.

Burkert’s Decentralised AS-i Fieldbus System with Intelligent Valves Optimises Additive Production at Beverage Plant (19/01/2011 14:36:00)

Companies operating in the competitive global market for food and beverage additives, such as concentrates and flavours, have to ensure that their production processes are not only safe and hygienic but also as efficient as possible. This has led to an increased demand for automation solutions at process level. However, the conventional approach of centralised automation of process valves cannot adequately meet the ever more stringent requirements of the industry. Intelligent process valves with integrated automation functions offer a viable and efficient alternative.

Food waste to energy tests as Eco-Solids International press ahead with VALORGAS programme (19/01/2011 14:32:32)

Eco-Solids International is set to commence tests for the EU-funded VALORGAS programme that will examine the potential for biogas production when pre-treating food waste for Anaerobic Digestion (AD) feedstock.

IDC CONFIRMS £300k ORDER PIPLINE FOR WIRELESS SOLUTIONS FROM IMHX 2010 (19/01/2011 14:29:01)

Improving production line efficiency through smarter communication and integrating warehouse distribution systems with external logistics were the main focus for visitors to the Intelligent Distributed Controls (IDC) exhibition stand at the well attended IMHX show this year. IDC, one of the UK's leading experts in warehouse and production line integration has confirmed very strong interest in its wireless hardware and software solutions employed to improve efficiency, organisation and workflow; reporting an order pipeline of over £300,000 worth of business as a result of enquiries made at the NEC based exhibition held in November.

ERIKS acquired the activities of Gasket Passerotti in Warsaw (Poland) (19/01/2011 14:25:39)

ERIKS acquired the activities of Gasket Passerotti in Warsaw (Poland).

SEEING RED – FOR ACCURATE BOND-LINE INSPECTION (19/01/2011 14:20:58)

Market leaders Intertronics are impressed with DYMAX's Ultra-Red™ fluorescing adhesive technology and think that we should all be "seeing red" to improve quality and authentication.

Embedded World, Nuremberg – Hall 10, Stand 319 (19/01/2011 14:18:01)

Green Hills Software, the largest independent vendor of embedded software solutions, will be demonstrating its leading edge integrated development suite (IDE), MULTI®, its safety and security certified INTEGRITY® real-time operating system (RTOS), its INTEGRITY Secure Visualization (ISV), and its wide portfolio of secure networking protocols on the industry's leading multicore microprocessors at Embedded World.

Haydon Kerk Motion Solutions introduces the programmable SplineRail Linear Actuator (19/01/2011 14:14:47)

Haydon Kerk Motion Solutions, Inc introduces the Programmable Motorized SplineRail Linear Actuator. The Programmable SplineRail combines mechanical drive, guidance, and control in a single, compact component. The system uses a Size 17 single stack or double stack stepper motor with the integrated Haydon IDEA Drive.

Laser Design now Reseller of World-Class Renishaw Products (19/01/2011 14:09:08)

Laser Design Inc. announced that it is now reselling Renishaw metrology probes and machine tooling, plus professional "Repair by Exchange," and also used equipment. Renishaw products lead the industrial metrology market in accuracy and selection.

SimpoeWorks latest capabilities to be demonstrated at SolidWorks World 2011 (19/01/2011 14:05:42)

Torcy, France, January 17, 2011. SIMPOE , the French software developer specialized in plastic injection simulation, today announced it will demonstrate the latest capabilities of its SimpoeWorks 2011 software solution at SolidWorks World 2011 conference.

Dairy farm benefits from Landia’s Automatic Slurry Handling System (12/01/2011 14:38:32)

A chronograph-controlled slurry pump and mixing system from Landia that can also handle sand, has eliminated laborious manual labour at Soerensen's dairy farm in Aars, Denmark.

BANDSAW CUTS MATERIAL 2.5 METRES ACROSS (12/01/2011 14:35:25)

A new, gantry-type bandsaw has been introduced by KASTO, designed for cutting slabs, ingots, forgings, forged parts, ships' crankshafts, turbine shafts and large parts in tool and mould making, as well as blanks and workpieces in the heavy machine building industry.

Electronic Design Names Magma’s Tekton to 2010 Hot 100 Products List (12/01/2011 14:32:10)

Static Timing Analysis Platform Uniquely Suited for Today's Most Challenging Designs SAN JOSE, Calif., Dec. 22, 2010 — Magma® Design Automation (Nasdaq: LAVA), a provider of chip design software, today announced that Electronic Design named the Tekton™ static timing analysis platform to its list of Hot 100 Products for 2010. Tekton is one of just three products named in the Electronic Design Automation (EDA) category.

Gently does it as Landia mixers save energy in Sweden (12/01/2011 14:27:17)

Slow-speed mixers from Landia have made significant energy savings at the Borås Treatment Plant in Sweden. The reduction in energy costs has also been achieved by installing just 3 Landia mixers per aeration basin, compared to 11 per basin installed previously.

HIMA Combines Turbomachine Functions in Single System (12/01/2011 14:24:37)

New turbomachinery control system offers significant space savings (Brühl, Germany, December 2010) The HIMax safety system from HIMA Paul Hildebrandt GmbH + Co KG enables the grouping of all turbomachine functions into an advanced TMC (turbo machinery control) system that requires less space and fewer parts, simplifies maintenance, and provides higher investment security and future compatibility. Its multitasking capability ensures the absence of reaction by separating safety functions from standard functions.

BEI Kimco Announces Breakthrough in Voice Coil Actuator Miniaturization (12/01/2011 14:20:36)

BEI Kimco Miniature VCA VISTA, Calif. &#8722; Dec. 21, 2010 &#8722; BEI Kimco Magnetics, a company of Custom Sensors & Technologies (CST), Inc., has announced an exciting breakthrough in miniaturization for cylindrical shaped voice coil actuators with the introduction of the Model LA05-05-000A. The new actuator measures only 0.5 in diameter by 0.5 in length at mid-stroke, approximately 0.5 smaller than typical models on the market. This size reduction offers engineers a new solution in meeting tight packaging constraints for military, medical and industrial applications.

New European reseller for Meggitt’s Wilcoxon Research product line (12/01/2011 13:16:19)

Germantown, MD –– Meggitt, a leading supplier of quality accelerometers and vibration sensors, has fortified sales channels in Europe with the addition of a new partner, Istec International BV. Istec International is now an authorized reseller of the Wilcoxon Research product line in Belgium, the Netherlands and Luxembourg.

INFLUX OF ORDERS AND RESTRUCTURING TRANSFORM GEO KINGSBURY BUSINESS (12/01/2011 13:12:33)

Incoming orders during 2010 returned sales at Geo Kingsbury Machine Tools to a level last seen in 2007, which was a record year. The company is sole agent in the UK for a number of top quality German machine tool brands and many users are at the leading edge of British manufacturing in their respective fields.

BEAMA WELCOMES DECC ELECTRICITY MARKET REFORM CONSULTATION , But association calls for partnership of Government and industry (12/01/2011 13:08:17)

BEAMA has welcomed the Government's consultation on a package of options for reforming the electricity market. With its focus on affordability, low carbon and security of supply, the association says it goes a long way to reaching the 2050 Pathways aspirations from earlier in 2010, pointing the UK towards an electric future.

Ovivo’s Bosker takes out the trash (12/01/2011 13:03:49)

Ovivo's Bosker Range of Trashrakes provides highly effective coarse screening at inlets to wastewater pumping stations and treatment plants – especially in urban areas where heavy debris in large sewers can cause major problems.

FREE SILENT KNIGHT SOFTWARE CREATES BILL OF MATERIALS (12/01/2011 12:50:53)

Simple Software Application Helps Fire Alarm Dealers Customize Bill of Materials NORTHFORD, Conn., December 17, 2010 &#61485; Silent Knight by Honeywell (NYSE: HON) introduces the SKST (Silent Knight Selection Tool) software application designed for fire alarm dealers to easily configure a bill of materials for any IntelliKnight™ addressable or conventional fire alarm system Silent Knight currently offers through wholesale distributors.

Semiconductor Component Manufacturers Increase Lifecycle of Tools and Equipment with DLC Coat-ings of Sulzer Metco (12/01/2011 12:46:04)

Improved wear resistance, reduced particle generation and in-creased lifecycle are top priorities for manufacturers to optimise production process Manufacturers can now reduce the friction and wear in all machinery used for producing semiconductor solutions and electronics thanks to market-leading Thin Film technology of Sulzer Metco. The wear-resistant, low-friction coatings increase the lifecycle of tools and machinery, enabling manufacturers to boost uptime, maintain productivity and maximise revenue.

IO-Link Analog Plug: convert analog signals into IO-Link signals (12/01/2011 12:34:19)

Until now it has been costly to connect and incorporate analog input/output signals, even though they generally only make up less than 10% of the signals used in a system. The reasons include the use of shielded cable on the installation side and expensive multi-channel input modules on the controller side. The new IO-Link Analog Plugs from Balluff with their high resolution of 14 bits provide the solution. They are the ideal choice for systems with limited instances of analog signals.

Jet Edge, Chukar Waterjet Exhibiting Innovative Waterjetting Equipment at Underwater Intervention, February 22-24 (12/01/2011 11:45:30)

Water Jet Technology Ideal for Undersea Operations, Marine Environments ST. MICHAEL, Minn. (December 16, 2010) – Water jet technology companies Jet Edge and Chukar Waterjet will showcase the latest innovations in portable and undersea ultra-high pressure water jet cutting and water blasting technology at Underwater Intervention, Feb. 22-24 in New Orleans. Look for Jet Edge and Chukar in Booth 139.

Thermo King to Implement aPriori for Product Cost Management (12/01/2011 11:34:46)

Thermo King Leverages aPriori Outlier Analysis Service to Identify Potential Product Cost Savings in Three Weeks CONCORD, Mass.--(BUSINESS WIRE)--aPriori today announced that Thermo King, a business of Ingersoll Rand, (NYSE: IR), has selected the aPriori Product Cost Management software platform to provide real-time product cost assessments throughout its product development lifecycle. Thermo King manufactures transport temperature control systems for a variety of mobile applications, including trailers, truck bodies, buses, shipboard containers and railway cars.

Measurement Specialties Shenzhen, China (12/01/2011 11:30:38)

Measurement Specialties, Inc. (NASDAQ: MEAS), an expert in sensor design and manufacturing, has achieved AS9100B Management System certification in its Shenzhen, China plant for the manufacture of position sensors designed in our Hampton, Virginia engineering center.

NOTIFIER HOSTS FREE LIFE SAFETY EDUCATIONAL SEMINARS NATIONWIDE (12/01/2011 11:22:37)

Half-Day Seminars Educate Architects, Engineers and Facility Managers on Life Safety Codes, Trends and Solutions NORTHFORD, Conn, December 16, 2010 - NOTIFIER by Honeywell (NYSE: HON) will host a series of free educational seminars in 13 major cities throughout the U.S. Industry experts from NOTIFIER and guest speakers such as Consulting Engineer Jack Poole P.E. and former New York City Fire Commissioner (1996-2002) Thomas Von Essen will cover the latest codes, trends and solutions in fire protection and emergency communications (a.k.a. mass notification) systems relative to the needs of today's architects, engineers and facility managers. Four CPD (Continuing Professional Development) credits will be given to each attendee.

Molex completes its Field-Attachable, External Thread mPm DIN Valve Connectors with the introduction of DIN Form C and Form Micro Connectors (12/01/2011 11:15:50)

IP67 sealing performance and superior cable retention for advanced performance and reliability WALLDORF, Germany – 16 December, 2010 – Molex Incorporated augments its range of externally-threaded Brad® mPm® DIN valve connectors with the addition of Form C and Form Micro housings; combining IP67 sealing properties with an external-thread design, the mPm DIN valve connector range provides superior cable retention for increased performance and reliability, simplifies the manufacturing process and reduces overall applied costs for hydraulic, pneumatic and electromagnetic drive systems.

ISA Automation Week 2011 Issues Call for Papers (12/01/2011 10:59:17)

Research Triangle Park, North Carolina, USA (16 December 2010) — The Program Committee of ISA Automation Week 2011: Technology and Solutions Event has issued a Call for Papers inviting authors, experts, innovators, thought leaders and automation professionals to submit abstracts for presentation consideration at the conference to be held at the Arthur R. Outlaw Convention Center in Mobile, Alabama, USA, 17-20 October 2011.

BALDOR EXTENDS NOVEL DIRECT-DRIVE SOLUTION FOR COOLING TOWER FANS TO HIGH POWER RATINGS REQUIRED FOR POWER GENERATION AND LARGE PROCESSING PLANTS (12/01/2011 10:53:51)

* approach eliminates gearbox and delivers optimised variable fan speed control Bristol, UK, December 8, 2010 --- Baldor has extended the range of its novel direct drive technology for controlling cooling tower fans to higher power ratings that can handle very large applications in power generating plants and heavy processing industries.

EUROSTYLE H2O range: Jib cranes and special gantry cranes for water process applications. (12/01/2011 10:49:15)

Ideal for operations in used water treatment stations, for industrial processes, sludge treatment or on farms and fish farms, EUROSTYLE H2O is a comprehensive range of jib cranes and gantry cranes designed for use in agressive environments and easily transported and manoeuvred by one person.

SOUTHWEST MANUFACTURING BENEFITS FROM FASTENERS AND ADHESIVES AT FAST EXHIBITION (12/01/2011 10:40:51)

Manufacturing engineers need to get up early in the morning these days – and the VIPs who pre-register for the early opening FAST exhibition near Yeovil in May will be rewarded not only with the best fastener, adhesives and assembly solutions, but also with a free cooked breakfast.

Krayden Introduces Dow Corning’s 702 Diffusion Pump Fluid for Large Volume Production (12/01/2011 10:38:58)

DENVER — December 2010 — Krayden, Inc., a leading distributor of engineered materials, introduces Dow Corning's 702 Diffusion Pump Fluid, designed for high vacuum and fast pumping of large volumes of gas or vapor in production.

HIGHLY-INSULATED OUTDOOR ENCLOSURES PROVIDE EFFICIENT PROTECTION FOR FIELD INSTRUMENTATION (12/01/2011 10:32:24)

* sandwich-construction provides superb environmental protection and energy savings December 8, 2010 --- The environmental protection of larger-scale instrumentation installations is made easy by a new range of highly insulated outdoor enclosures from the field equipment protection specialist, Intertec. The BASIC VARIO range of wall- or floor-mounting enclosures is made using Intertec's unique sandwich-construction technique, with GRP (glass reinforced polyester) skins enclosing a thick layer of insulating foam.

NEW ESAB WEBSITE IS USER-FRIENDLY (12/01/2011 10:18:47)

Welding equipment leader ESAB has revised its website to make it more customer-focused and easier to use

FRANCO BRITISH BUSINESS AWARDS NOMINATE GYS FOR THE 2010 INNOVATION AWARD (12/01/2011 09:43:28)

GYS Ltd, the French welding equipment and battery charger manufacturer achieved a finalist nomination at the 2010 Franco British Business Awards. GYS were nominated for their Green Flexible Voltage technology (GFV) which overcomes a trio of technical and environmental challenges provided by the UK electricity supply.

Technology World in partnership with UK NanoForum welcomes largest international delegation (12/01/2011 09:38:08)

The first day of Technology World in partnership with UK NanoForum at London's ExCeL experienced the largest delegation of international visitors in the event's history. More than 1000 delegates attended day one of the two-day British technology and science showcase hosted by UK Trade & Investment

Baumer DSRC Strain Rings Are Overload-safe and Save Time (12/01/2011 09:32:25)

December 8, 2010. With the strain ring series DSRC, Baumer offers flexible solutions for measuring cyclical processes such as tension, compression, and torque. The strain rings offer a good repeatability of 0.1 per cent F.S. Based on the patented STRAIN-MATE principle, the measuring elements of the sensor invariably function in the force shunt circuit, so the sensors cannot be overloaded. Due to their rugged mechanics, the strain rings of the DSRC series are practically indestructible and thus have a very long service life. As the rings can be screwed on, there is no need for surface preparation before installation. Compared to bonded sensors, this quick and easy installation saves significant amounts of time and money.

Meggitt Sensing Systems Introduces TEDS Capabilities into (11/01/2011 18:37:07)

December 6, 2010, San Juan Capistrano, California, USA – Meggitt Sensing Systems, a Meggitt group division, has announced the recent introduction of Transducer Electronic Data Sheet (TEDS) capabilities into its industry best-selling Endevco® model 7290D series, allowing it to be used within larger channel count applications. The model 7290D series is a high-accuracy, variable capacitance (VC) accelerometer family, offering exceptional thermal stability, reliability and performance within flight test, engine testing and other extreme temperature testing environments.

OmniVision’s OV10810 — First Native 16:9 CMOS Image Sensor to Enable Simultaneous 1080p HD Video Recording and 10-Megapixel Image Capture (11/01/2011 18:32:51)

SANTA CLARA, Calif., — January 6, 2011 — OmniVision Technologies, Inc. (NASDAQ: OVTI), a leading developer of advanced digital imaging solutions, today introduced the OV10810, a 10-megapixel CMOS image sensor built on OmniVision's highly optimized 1.4-micron OmniBSITM pixel architecture. The 1/2.5-inch OV10810 is designed to offer complete convergence between high-resolution still photography and full high-definition (HD) video by combining 10-megapixel burst photography at 30 frames per second (fps) with full 1080p HD video in a native 16:9 aspect ratio. This makes the OV10810 an ideal choice for digital still and video camera (DSC/DVC) hybrids and high-end smart phones.

Military Circular Connectors From Lane Electronics Assembled To Order & Delivered Ex Stock Or In Days (11/01/2011 07:22:11)

Lane Electronics has expanded its stock profile and production capability to offer customers a very wide variety of MIL-DTL-38999 qualified product on extremely short lead times – often ex.stock. With more than One Million Euros worth of connector shells, contacts and components from Souriau and Weald Electronics held at Lane's assembly facility, the connector specialist is ideally positioned to provide customers with a wide range of military circular connectors assembled to order and delivered from stock or within days.

Compact, Digital Motion Controller for Nanopositioning (07/01/2011 10:47:42)

The single channel E-709 piezo controller from Physik Instrumente (PI) has been already introduced for piezo-based positioners and scanners which use strain sensors. Since the majority of the nanopositioning systems from PI employ such sensors, the E-709 allows significantly lower system costs in comparison to the digital controllers offered up until now.

Meggitt Sensing Systems Introduces Endevco® Miniature High-Frequency, Low Bandwidth Piezoelectric Accelerometer (07/01/2011 10:36:23)

December 3, 2010, San Juan Capistrano, California, USA – Meggitt Sensing Systems, a Meggitt group division, has recently introduced the Endevco® model 7240C, a miniature piezoelectric accelerometer with low bandwidth flat to 30 kHz, expressly designed for general purpose high-frequency vibration measurements.

HONEYWELL STRENGTHENS PERSONAL PROTECTIVE EQUIPMENT OFFERING (07/01/2011 10:32:24)

Combines Sperian Protection and Honeywell Safety Products William Hayes Named as President of Combined PPE Businesses MORRIS TOWNSHIP, N.J., December 3, 2010 – Honeywell (NYSE: HON) today announced it will combine Sperian Protection with Honeywell Safety Products to form One Global Personal Protective Equipment business. The combined business will be called Honeywell Safety Products and will continue to be part of the Honeywell Automation and Control Solutions Life Safety business. William Hayes, current president of Honeywell Safety Products has been named President of the combined entity.

IDC APPLIES RFID TECHNOLOGY IN NEW TRANSPORT iNET- FUNDED ACADEMIC/BUSINESS PROJECT TO IMPROVE ROAD SAFETY (07/01/2011 10:15:36)

IDC APPLIES RFID TECHNOLOGY IN NEW TRANSPORT iNET- FUNDED ACADEMIC/BUSINESS PROJECT TO IMPROVE ROAD SAFETY. IDC is applying its RFID technology in a new Transport iNet –funded project to develop a Driver Behaviour System that aims to improve road safety and reduce accidents by alerting drivers – at all times - when they exceed speed limits. The £83,000 research project is a joint academic/industry collaboration involving the Universities of Derby and Loughborough, IDC Ltd and RFID tag manufacturer, CLC UK Ltd.

RF GFI/GFIS: Foot controls with new high reliability wireless technology (05/01/2011 14:30:40)

The advantages of wireless communication are particularly obvious in the case of foot controls. The units can be positioned at will and there are no cables to trip over or restrict movement. With the RF GFI/ GFIS series engineers wishing to exploit these advantages not only have a new series of wireless foot switches at their disposal; they can also use a new high reliability wireless standard developed by steute.

GF Piping Systems' Diaphragm Valve Series Recognized as Breakthrough Product of 2010 in Processing Magazine's 13th Annual Awards Competition (05/01/2011 14:10:21)

TUSTIN, Calif. - Dec. 23, 2010 - GF Piping Systems' Type 514-519 High Flow Diaphragm Valve eries has been selected as a Breakthrough Product of 2010 in Processing magazine's 13th Annual Award Competition. Finalists were chosen based on the product's significance to the process industries and uniqueness from similar products on the market. Winners were announced in Processing's December issue.

GAMBICA announces appointment of new Chief Executive (05/01/2011 14:07:14)

GAMBICA, the UK-based organisation which represents the instrumentation, control, automation and laboratory technology industry, has announced the appointment of Dr Graeme Philp as its new Chief Executive. Dr Philp takes over from Geoff Young, who led the organisation for 25 years and who is retiring.

Food waste to energy tests as Eco-Solids International press ahead with VALORGAS programme (05/01/2011 13:55:44)

Eco-Solids International is set to commence tests for the EU-funded VALORGAS programme that will examine the potential for biogas production when pre-treating food waste for Anaerobic Digestion (AD) feedstock.

25 Years of SERCOS: With Tradition and Innovation into the Future (05/01/2011 13:51:26)

25 Years of SERCOS: With Tradition and Innovation into the Future Santa Rosa Beach, FL: At the recent SPS/IPC/Drives show, the SERCOS interface for digital communications announced its 25th year anniversary. The success of the SERCOS interface is certainly way beyond the wildest dreams of the pioneers of SERCOS 25 years ago. Their results have been accepted across the world and repeatedly characterize innovative automation concepts in thousands of applications in a large number of industries.

LAIDLER LEADS PLANT & MACHINERY SAFETY ZONE (05/01/2011 11:35:03)

LAIDLER LEADS PLANT & MACHINERY SAFETY ZONE AT HEALTH AND SAFETY '11 - SOUTH Laidler Associates, one of the UK's leading machinery safety and compliance consultants will once again be sponsoring the Plant & Machinery Safety Zone at Health and Safety '11 – South which takes place at Sandown Park Racecourse, Esher, Surrey on the 1st and 2nd March 2011.

Latest Applications will be key at LASER World of PHOTONICS 2011 (03/01/2011 16:27:53)

Industry marketplace, think tank, knowledge forum, solution provider, source of momentum, networking – LASER World of PHOTONICS satisfies all these entirely different claims. Applications are the common denominator and are dealt with throughout the trade fair and the Congress. Optical technologies will become the focus of attention at the world's leading trade fair and the World of Photonics Congress, which will be held one month earlier than usual from May 23 to 26, 2011. The key topics at the trade fair will be lasers and laser systems for manufacturing, green photonics as well as biophotonics and life sciences.

Leading companies sign up for 2011 design conference (19/12/2010 10:18:50)

Over 250 people will join speakers from well known companies including Dyson, Procter & Gamble, Nissan and games company Hasbro at a two day conference to be held on March 15th and 16th at The Sage Gateshead.

SEHO Systems to Expand SEHO Academy to the US in 2011 (19/12/2010 10:15:26)

ERLANGER, KY &#8213; December 2010 &#8213; SEHO Systems GmbH announces that the SEHO Academy, which provides an innovative, flexible training concept, will expand into the United States in 2011.

Beijer Electronics acquires QSI Corporation (19/12/2010 10:12:49)

With the acquisition of QSI Corporation we get a strong presence in North America which is a strategically important market for Beijer Electronics. Among other positive things we see great potential with the extended product portfolio designed for demanding environments and for mobile applications, says Magnus Ekerot, Business Area Director of HMI Products.

200 Page knitter-switch product catalogue available in print or as a download (17/12/2010 09:42:25)

knitter-switch, one of Europe's leading switch manufacturers, has just published its latest product catalogue. Produced to coincide with the recent electronica 2010 trade fair in Munich, the new catalogue totals some 200 pages and contains details of many recently introduced switch products as well as contact information for all knitter-switch offices and all worldwide distributors.

New PPT VISION M-390 Smart Camera Provides 16 Times the Resolution of 640 x 480 Cameras (15/12/2010 11:06:35)

PPT VISION announces high-resolution M-390 Smart Cameras deliver greater accuracy for high-precision machine vision applications. The M-390 cameras can be used as part of PPT VISION's IMPACT® M-Series Embedded Vision System—a single system with four independently operating cameras running distinct inspection, guidance or identification programs. The IMPACT M-Series System's unique design allows operators to mix and match camera resolutions for all points of inspection—providing the flexibility to deploy cameras that are specifically suited to each of the separate inspection requirements. With increased resolution—16 times the resolution of VGA (640 x 480) vision cameras—the IMPACT M-390 Smart Cameras provide ideal solutions for the inspections that require more precision.

BEI Kimco Magnetics' New Linear Voice Coil Actuator Features (15/12/2010 11:04:13)

BEI Kimco Magnetics, a company of Custom Sensors & Technologies (CST), Inc., has introduced the LA13-13 Linear Voice Coil Actuator featuring an IP64 fully sealed package impervious to water splashes and other fluids. This new light-weight actuator provides reliable, long lasting performance in highly contaminated environments and is ideally suited for industrial, semiconductor and medical applications.

SPERIAN SCALES NEW HEIGHTS IN SAFETY DESCENDER TECHNOLOGY (15/12/2010 10:59:54)

Miller by Sperian has launched a new descender and lifting device, called SafEscape ELITE, that operates reliably in even the harshest conditions including wet weather and low temperatures and complies fully with the new EN 341:2008 standard for rescue devices. SafEscape ELITE provides a safe and dependable solution to the problems of rescuing persons who have had an accident while working at height, and of evacuating people in an emergency from high working places.

ATS Applied Tech Systems announces the release of their Visual Quality Operations Management Software (15/12/2010 10:09:11)

ATS Applied Tech Systems announces the release of their Visual Quality Operations Management Software, ATS Inspect version 5.3. and invites you to visit www.ats-inspect.com to see the complete list of enhancements available in 5.3 ((PDF download), as well as case studies describing the benefits that ATS Inspect has accomplished in the Manufacturing, Assembly, Refurbishment and Food & Beverage Industries.

New and Improved Packaging from International Products Corporation (15/12/2010 09:45:31)

International Products Corporation is pleased to announce the introduction of new packaging. In addition to the new design, the bottles will be available in standardized metric sizes worldwide.

SMART LOAD SENSOR (15/12/2010 09:25:16)

A smart load sensor developed in the UK by Sensor Technology provides all the information needed to optimise efficiency and increase profitability of a wide range of industrial operations.

Beijer Electronics acquires QSI Corporation (13/12/2010 14:19:01)

With the acquisition of QSI Corporation we get a strong presence in North America which is a strategically important market for Beijer Electronics. Among other positive things we see great potential with the extended product portfolio designed for demanding environments and for mobile applications, says Magnus Ekerot, Business Area Director of HMI Products.

HUBER+SUHNER is Ready for the licence-free 60GHz band with industry leading Wireless Ethernet technology (09/12/2010 11:09:55)

With the recent announcement from UK regulator OFCOM that it has made the 60GHz band available licence-free for fixed wireless links, HUBER+SUHNER expects a sharp take-up in the use of this long awaited wireless Ethernet solution.

New Power Factor Correction Converters from Powerstax (06/12/2010 09:25:47)

Powerstax, one of Europe's leading application-rich power solutions manufacturers, announces the availability of their new FP Series, AC to DC, 1000W and 600W power factor correction (PFC) modules. The Powerstax FP Series are "full brick" (116.8x61x12.7mm) sized modules providing high performance AC-DC Power Factor Correction offering end users a typical system power factor of 0.99. The converters have been developed to provide front-end power conditioning for systems using high input voltage DC-DC Modules. The Powerstax PFC Modules offer a cost effective alternative to designing power supplies with discrete components in many applications.

Electronic access - it’s not just about opening enclosure doors (04/12/2010 15:44:16)

Southco discusses how designers and operators of enclosures can benefit from latest generation electronics access technology solutions

Wireless Shackle Load Cells Allow Versatility for a Wide Range of Industrial Applications (04/12/2010 15:28:04)

Shackle load cells are used widely in lifting and weighing applications and LCM Systems, one of the UK's leading designers and manufacturers of load cells and load monitoring systems has seen a recent surge in the demand for its recently launched TELSHACK range of wireless shackle cells. Designed specifically for use in harsh or rugged environments, these innovative load cells are already in use in applications such as under-hook hoist and crane weighing in factory environments, cable tension monitoring and crane load safety monitoring.

Survitec Acquires Commercial Marine Business from Revere Supply Inc. to Boost U.S. Presence (04/12/2010 15:26:36)

)--Survitec Group Limited, the global leader in safety and survival equipment, has acquired Revere Commercial Marine Business from Revere Supply Company Inc., to expand its presence in the United States. Terms of the transaction were not disclosed.

New Wilbrecht LEDCO Catalog Details Panel and Board Mount LED Indicators, Guides Product Selection (04/12/2010 15:19:13)

St. Paul, MN—December 1, 2010—Wilbrecht LEDCO, Inc., a wholly owned subsidiary of Microprecision Electronics, announces its updated product catalog is now available. The new 24 page color catalog features their complete LEDCO product line of high quality LED, neon and incandescent indicator lights.

‘Riverside Place Kendal a blaze with appreciation for Cosaf’s specialist smoke ventilation systems’ (04/12/2010 15:12:15)

Occupying a spectacular location on the edge of Lake District, the new K Village Outlet Centre consists of 60,000 sq ft of retail and leisure space within a contemporary covered environment. Main contractor, Rotary NW Ltd, required a comprehensive smoke ventilation system for the specialist zones of the site that included systems for both above and below ground level extraction and safety.

Bentek Solar Announces Shipments of Over 60MW of Industry Leading Circuit Breaker Re-Combiners (04/12/2010 15:07:52)

SAN JOSE, CA &#8213; December 2010 &#8213; Bentek Solar, a leader in the design and manufacture of optimized Configure-To-Order solar combiners, re-combiners and solar safety systems, announces that the company has shipped over 60MW of Circuit Breaker Re-combiners. The combiners use industry-leading circuit breaker technology, eliminating the need for standard fuses.

MCERTS 2011 exhibition almost full (04/12/2010 15:02:33)

Organisers of major UK environmental monitoring event MCERTS 2011, which takes place on 6th & 7th April in Bretby, near Burton on Trent, have warned that exhibition space is almost fully booked with only a few stands remaining.

NEW COMPRESSED GASES SAFETY HANDBOOK FROM WELDABILITY-SIF (04/12/2010 14:54:12)

Weldability-SIF, the UK based "one stop" welding consumable and equipment supplier has published a new 64-page A5 book entitled 'Compressed Gases Safety Handbook' for personnel handling and using compressed gases in industrial environments.

AIRnet Makes All The Right Connections (02/12/2010 11:36:20)

By minimising pressure drop, energy use and installation time Atlas Copco Compressors' AIRnet compressed air piping system is making a major contribution to the energy efficiency, air quality and flexibility of manufacturing and process industry applications.

Krayden Releases Circalok 6008 Potting Compound by LORD (02/12/2010 11:35:36)

Krayden, Inc., a leading distributor of engineered materials, introduces the Circalok 6008 Potting Compound by LORD, a filled low viscosity epoxy resin for general purposes such as an encapsulating and potting compound for electronics.

igus UK Awarded ISO14001 Environmental Accreditation (02/12/2010 11:33:56)

Northampton based polymer specialists igus UK is proud to announce that it has achieved ISO14001 certification. Part of an ongoing business objective to reduce the company's environmental footprint, the accreditation endorses the quality and environmental management systems igus have in place.

New VLT® Automation VT Drive is Cost Reducing Powerhouse for Industrial Variable Torque Applications (02/12/2010 11:32:16)

Danfoss introduces the VLT® Automation VT Drive. These drives are specifically engineered to save energy, reduce up front and operating costs, and maximize uptime in industrial variable torque fan, pump, blower and compressor applications. They are available for 240 and 480 VAC single and three phase, or 575 and 690 VAC three phase operation with ½ up to 1400 HP, along with a wide range of industrial enclosure options, to support varied performance needs.

Kyzen Appoints The EMC3 Group to Represent Florida (02/12/2010 11:30:55)

Kyzen, a world leading provider of environmentally responsible precision cleaning products for electronics and high-technology manufacturing operations, has appointed The EMC3 Group as its sales representative in Florida.

Meggitt Releases New Short Form Catalog For Wilcoxon Research Industrial Vibration Sensor Line (02/12/2010 11:28:33)

Meggitt, the maker of Wilcoxon Research accelerometers and vibration sensor accessories, has released a short form catalog of industrial products. The Wilcoxon Research products short form catalog contains accelerometers, 4-20 mA vibration sensors, vibration transmitters, cables and accessories for industrial condition based maintenance and predictive maintenance applications.

Banner AG4 SafetyBanner Engineering Corp. introduces the AG4 Safety Laser Scanner, designed to deliver safety, simplicity and versatility in a single, compact optical device. T Safeguards Irregularly-Shaped Areas in Stationary and Mobile Applications (02/12/2010 11:25:36)

Banner Engineering Corp. introduces the AG4 Safety Laser Scanner, designed to deliver safety, simplicity and versatility in a single, compact optical device. The AG4 Safety Laser Scanner uses pulses of Class 1 infrared laser light to locate the position of objects in its field of view, effectively protecting personnel by safeguarding both stationary and mobile hazards within a user-designated area.

Sudlows wins Data Centre contract with Anglia Ruskin University (02/12/2010 11:14:41)

Data Centre Design and Build Specialist, Sudlows, has won a competitive £700,000 contract to build a secure data centre facility for Anglia Ruskin University.

Sandvik Coromant launches innovative CoroCut® QS™ holders for parting and grooving (02/12/2010 10:35:21)

As part of its CoroPak 10.2 programme of new product introductions, cutting tool and tooling system specialist Sandvik Coromant is launching an innovative new range of CoroCut® QS™ tool holders. The shorter holders improve the stability and part quality when performing parting and grooving operations on sliding head automatic lathes.

Fluke introduces new Installation Tester models (01/12/2010 15:43:22)

Fluke, the global leader in portable electronic test and measurement technology, has introduced two new models, the Fluke 1654B and the Fluke 1652C, to its highly successful range of rugged, easy-to-use Fluke 1650B Series of Installation Testers. The Fluke 1654B enhancements include RCD type B testing and increased data storage, while the Fluke 1652C includes a phase sequence indicator. The Fluke 1650B Series of multifunction Installation Testers are designed for high productivity testing and verification of domestic, commercial and industrial electrical installations.

Red Lion Dual Ethernet Expansion Card Simplifies Machine-to-Enterprise Integration (01/12/2010 10:06:56)

Red Lion Controls, Inc. announces a new Ethernet expansion card for the Data Station Plus and Modular Controller series products. The XCENET Ethernet expansion card allows operators to easily isolate machine level network traffic from the enterprise level network, benefiting both automation process engineers and IT managers. The engineer can simply assign a fixed IP address for the port connected to PLCs and drives, while the IT manager can either select their own IP address or use DHCP to configure the enterprise port. This allows for communication on separate networks, increasing platform functionality and flexibility.

New Fume Extraction Equipment Brochure From Flextraction (30/11/2010 18:15:19)

Flextraction Ltd, suppliers and manufacturers of Local Exhaust Ventilation (LEV) products has published their new 20 page product range brochure "Breathe in... Dust and fume extraction products."

Serapid Telescopic Mast System For Extreme Environments (30/11/2010 16:21:42)

SERAPID, Inc designed a telescopic mast for a government security operation. The mast is capable of withstanding some extreme conditions.

Magma's FineSim Deployed by Toshiba Corporation for Advanced Flash Memory Sign-off Simulation (30/11/2010 16:20:21)

Magma® Design Automation Inc. a provider of chip design software, announced today that Toshiba Corporation, a leading provider of flash memory products, has deployed the FineSim™ platform for sign-off simulation. Toshiba uses FineSim Pro with the native multi-CPU technology for its NAND flash memory development.

Nord Drivesystems IC410 Cast Iron Motors Provide High Starting Torques For Harsh Environment/Frequent Reversal Applications In Steel Production (30/11/2010 16:14:45)

NORD Drivesystems expertise in drive technologies for vertical markets is well demonstrated by its wide range of gearboxes, motors, frequency inverters and servo controls that are suited to and extensively used in iron & steel production and other metal processing industries. Such applications demand peak performance for 24/7 operation in harsh and often high temperature environments combined with low maintenance, long service life and the highest levels of drive system efficiency.

NewAge® Industries Welcomes Michael Allard as Global Distribution Sales Manager (30/11/2010 16:11:33)

Plastic tubing manufacturer NewAge Industries announces the appointment of Michael Allard as its Global Distribution Sales Manager. Allard brings many years of sales and management experience in the industrial, biopharmaceutical, and semiconductor sectors to this position.

Premier Farnell And Demmel Products Global Agreement Boosts Time To Market At Low Development Costs (30/11/2010 16:09:44)

Premier Farnell plc (LSE:pfl) the leading multi-channel, high service distributor supporting millions of engineers and purchasing professionals globally, today announced a global franchise agreement with demmel products, an innovative leading manufacturer of Next Generation Intelligent LCD (iLCD) technology.

New Man In The South (30/11/2010 16:07:48)

Bibby Makes Case Why Manufacturer Repair Of High Performance Couplings Is Best (30/11/2010 15:55:33)

Bibby Transmissions, a World- leader in the design and manufacture of high performance couplings for industrial, power generation and process applications, is making the case 'for manufacturer repair is best' in providing the highest possible safeguards and security for Bibby customers across the globe.

Any Material, Any Thickness, Any Time (30/11/2010 14:17:48)

As the stockholder of a wide range and thicknesses of materials, ADS Laser in Leicester has always advertised its capacity to turnaround sheet metalworking orders quickly. However, with the company's acquisition of the new TRUMPF TruLaser 3030 L20 – formerly the TruLaser 3030 NEW – it has taken this ability into a different league.

Rittal Re-configures Its Electronics Configurator (30/11/2010 14:08:48)

Rittal has responded to customer requests by updating their online subrack configurator. No longer limited to only those units shown in the catalogue, the subrack configurator now includes all the subracks possible from the parts in the product range. Almost 1000 different combinations are available for merging into a printable bill of materials which can be submitted directly for a quotation.

Essex Magistrates Courts Centralises Services With Help From Interalia's Xmu (30/11/2010 14:02:27)

The XMU+ announcement and call processing system from Interalia Communications, a leader in the design and manufacture of digital voice announcement solutions, is helping Essex Magistrates Court consolidate its core support functions. Part of the multi-million pound scheme to improve the county's magistrates court service, around 100 staff from courthouse offices in Colchester, Southend, Basildon and Harlow have centralised into a new Essex Courts Administration Office in Chelmsford. The XMU+ is providing a single platform to enable the Court to centralise calls from all four offices into one.

Thermal Energy International Unveils A Larger Range Of Flu-ace Systems At Maintec (30/11/2010 13:59:06)

Thermal Energy International Inc. will be unveiling its modified range of FLU-ACE systems on stand D5 at Maintec 2011. Providing heat recovery and emission control in one package, FLU-ACE systems will be available in a broader range of sizes and are aimed at processing companies and institutions with both CHP waste heat boilers as well as traditional industrial boiler systems, wishing to take advantage of the substantial economic and environmental savings provided by recovering large amounts of lost heat and energy from the boiler exhaust.

Diesel Spill Kits Now Supplied By shentongroup (30/11/2010 13:57:02)

The Control of Pollution Regulations 2001 has resulted in the Environment Agency taking a strong line with polluters by issuing stringent fines. However despite every care being taken accidents can happen. Aware that the containment of spills is a major concern to companies and institutions, shentongroup is now offering Diesel Fuel Kits with all its generators.

Toumaz ‘XENIF’ all-in-one Wi-Fi, baseband and application processor now in production with PURE ONE Flow connected audio product (30/11/2010 13:53:54)

Toumaz, the leading provider of ultra-low power wireless telemetry technologies for medical monitoring and internet-connected consumer devices, announces that its TZ1090 ('XENIF') System-on-Chip is now in production in the latest connected audio product from PURE, the world's leading supplier of DAB and connected radios.

Renishaw to address manufacturing’s need for process control at IMTEX 2011 (30/11/2010 13:49:49)

At the IMTEX exhibition taking place in Bangalore, India, from 20th to 26th January 2011, Renishaw will highlight a range of process control solutions that help tackle the increasing drive to lean manufacturing, from new technologies for pre-process machine calibration, to on-line and off-line post-process measurement.

Cadac Organice APAC signs partnership with Clayko in Australia (30/11/2010 13:48:02)

Cadac Organice APAC, distributor of Cadac Organice BV, a Microsoft Gold Certified Partner and developer of Cadac Organice (a SharePoint based engineering document management solution), has signed a partnership agreement with Clayko. Clayko will sell and implement the Cadac Organice Product Suite for customers in Australia.

Will you be the TracePartsOnline.net one millionth registered user? (30/11/2010 13:46:47)

TraceParts, a leading global provider of 3D Marketing solutions, today launched the official user registration countdown of its flagship online part library www.tracepartsonline.net. With 991,513 registered users from more than 200 countries as of today, TracePartsOnline.net will reach the impressive one million mark within just a couple of weeks. The lucky one millionth registered user will win an Apple iPad™.

Linux Drivers And USB 3.0 Compatibility Enhance uEye Camera Functionality (30/11/2010 13:46:10)

The popular range of IDS uEye cameras, available from STEMMER IMAGING, now has enhanced functionality thanks to a new version of Linux drivers. In addition, all USB 2.0 camera models have been shown to be compatible with the USB 3.0 interface. The new Linux driver version 3.70 offers the same level of functionality as the established Windows™ drivers and allows developers to create applications that will work under both operating systems without any additional design effort. Compatibility of USB 2.0 models with USB 3.0 is good news for users wishing to upgrade their computer systems and make use of the enhanced data transfer speed offered by USB 3.0.

Creaform Showcases New MetraSCAN Optical 3D Scanning System at EuroMold (30/11/2010 13:45:20)

Creaform, one of the world's leading manufacturers of 3D measurement technologies, presents at Euromold and to the entire world its new MetraSCAN optical CMM 3D scanner.

P5000ZEM Machine (30/11/2010 13:42:25)

The P5000ZEM provides a column-mounted micro-percussion marking solution What sets this machine apart is its ease of use, the precision of its marking, and its motorised Z axis which incorporates a probe, so that it can find the marking surface independently. It is designed for marking of single items and short production runs, for numerous applications: traceability of parts batches across a workshop, marking stations for aeronautical parts, tool identification etc...

New Plasma Cutter 21kf Has In-built Air Compressor (30/11/2010 13:40:30)

GYS Ltd, the French welding equipment and battery charger manufacturer, has launched a new lightweight single phase 230V Plasma Cutter 21KF with a unique in-built 60/70dB air compressor and de-humidifier, making it ideal for use in workshops and on-site in agricultural, construction, quarrying and engineering applications, where no compressed air supply may be available.

Hepco Appoints Group Manufacturing Director And Reaffirms Its Commitment To Apprenticeships (30/11/2010 13:37:35)

With the appointment of Barry Engstrom to the post of Group Manufacturing Director with HepcoMotion®, the company is embarking on a new initiative to align best practice at both of its UK manufacturing sites.

Green Hills Software ships world's fastest trace probe with largest storage capacity (30/11/2010 12:51:02)

Green Hills Software, Inc., the largest independent vendor of embedded software solutions, has announced SuperTrace™ Probe v3, the fastest trace probe with the largest storage capacity ever built. Starting with 4 gigabytes of trace, expandable to higher capacities, and a sustained JTAG download speed of over 10 megabytes per second, SuperTrace Probe v3 once again resets the standards for all trace probes. SuperTrace Probe v3 is tightly integrated with Green Hills Software's award-winning, patented MULTI® TimeMachine™ debugging suite, allowing developers to fix bugs faster, optimize with ease, and test with confidence with the most advanced trace tools available.

New Power Conversion product catalogue available now from Powerstax (30/11/2010 12:49:39)

AC, DC and Custom Power Supplies for Industrial, Telecoms and MIL/COTS applications

ONG Automation achieves Wonderware Endorsed Partner Ecosystem status (30/11/2010 12:47:16)

ONG Automation, Cork, Ireland has been awarded full Endorsed Partner status in recognition of its utilisation, skills and training investment in Wonderware products. This was announced recently at the Invensys EURA OpsManage'10 Industry Conference and Collaboration Expo, Disneyland® Paris, France. The recognition is the first such award for an Irish company and is one of only three newly awarded throughout Europe, the others being Goodtech Solution AS in Norway and Technord in France.

Everett Charles Technologies’ FSG Introduces New LEDCHECK™ VIII (30/11/2010 09:18:02)

Everett Charles Technologies' (ECT) Fixture Services Group (FSG) introduces LEDCHECK™VIII, a new assembly for automatically testing the color, wavelength and light intensity, including WHITE color, of LEDs on printed circuit boards (PCBs) while under test.

STI Electronics Appoints Tom Loggins as Account Executive (30/11/2010 09:16:11)

STI Electronics, Inc., a full service organization providing training, electronic and industrial distribution, consulting, laboratory analysis, prototyping, and small to medium volume specialized PCB assembly, has appointed Tom Loggins as an Account Executive for its sales department.

Techcon Systems Launches New TS5540-MS Stainless Steel Micro-Spray Valve (29/11/2010 19:28:40)

Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, launches the new TS5540-MS Micro-Spray Valve. The new valve is designed to spray low to medium viscosity fluids through disposable dispensing tips.

Electrolube Launches a High Temperature Conformal Coating (29/11/2010 19:27:22)

Leading electro-chemical manufacturer, Electrolube has launched its latest product to the market, DCA-HT. The modified silicone conformal coating has been specifically designed for the protection of electronic circuitry.

LeCroy andEvatronix Announce Partnership for SuperSpeed USB 3.0 Development Solutions (29/11/2010 19:25:12)

LeCroy Corporation and Evatronix SA have announced today the signing of a partnership agreement that aims towards a faster market adoption of the SuperSpeed USB 3.0 technology by cooperation on mutual product development and USB market investigation. Both companies have established strong leadership positions in the USB market through comprehensive portfolios and years of design experience. The partnership will now leverage this expertise and bring new added value to SuperSpeed USB 3.0 application developers.

ECOBUILD 2011 1st – 3rd March 2011, ExCel London Stand no. S2450 (29/11/2010 18:01:42)

The building sector accounts for 40% of the EU's energy consumption and offers the single largest potential for greater efficiency. Infrared has proven itself to be an exceptional ally for those responsible for minimising energy waste. It is the perfect technology for visualising energy loss and for identifying the structural faults that cause it.

GAMEWELL-FCI NOW APPROVED GSA SCHEDULE VENDOR (29/11/2010 17:57:42)

Gamewell-FCI by Honeywell is now a GSA (General Services Administration) Schedule No. 84 supplier of advanced fire alarm and mass notification (a.k.a. emergency communications) systems. Under GSA Contract No. GS-07F-0087X, Gamewell-FCI can supply government entities with state-of-the-art fire protection products, supported by its nationwide network of Platinum Associate Engineered Systems Distributors.

Foremost Celebrate 21 years of success on 21st November (29/11/2010 17:53:38)

On November 21st 1989, Alan Cook struck out on his own to create a specialist distributor of electro-mechanical components. With a wealth of experience from his careers in both electronic engineering and broad-line distribution Alan wanted to create something different. And so Foremost Electronics was born. The goal was to provide design engineers in the UK with a reliable source of technologically advanced Emech components and offer a "service with a difference".

Quick and simple site balancing with the new SKF Microlog Field Balancer unit (29/11/2010 13:23:37)

SKF, has extended its SKF Microlog family of portable data collection systems with the introduction of a new instrument ideally suited for the onsite balancing of rotors. Ideally suited for electrical motor rewinders, the SKF Microlog Field Balancer will support both single or dual plane balancing; and with its easy to follow menus can provide a simple summary report of trial and balancing runs prior to the engineer leaving site.

Video of the Week – igus Energy Chain Lab (29/11/2010 13:22:22)

Energy Chain expert igus has extended its energy chain and flexible cables test lab extensively, such that it now covers more than 1000 square metres. Here a wide range of tests is carried out on standard products, as well as special custom parts, using more than 70 dedicated test stations.

Parker’s IQAN Hydraulic Range Helps Train The Next Generation Of Engineers (29/11/2010 13:21:03)

A range of state of the art IQAN hydraulic products from Parker Hannifin, the global leader in motion and control technologies, are being used at the National Fluid Power Centre to help develop the skills and knowledge of the engineers of tomorrow. The high performance IQAN technology has been chosen to demonstrate the application of electronic control in hydraulic systems, illustrating the power, flexibility and configurability of embedded controllers, as part of the Stage 3 Mobile Electro-Hydraulics Systems course at the centre.

New Installation Sector Deputy Director For BEAMA (29/11/2010 13:17:52)

Keith Smith is BEAMA's new Installation Sector deputy director. His key responsibilities include co-ordinating activities across the Industrial, Single Phase and Cable management product groups of BEAMA as well as taking the role of secretary to its Anti-Counterfeit Working Group.

Latest Strain Gage Catalog Contains Wealth Of Information (29/11/2010 13:16:36)

HBM's new catalog Strain Gages and Accessories is now available in both English and German versions. The catalog features all of HBM's extensive range of strain gages and their specifications on nearly 100 pages.

PTC Gives Adept Scientific Their Mathcad Supplier Seal Of Quality (29/11/2010 13:15:36)

Adept Scientific (Letchworth, Herts) has won a Mathcad Global Award 2010, acknowledging its status as the top Mathcad reseller Worldwide.

New Anti-bacterial Treatment For Industrial Hardware (29/11/2010 13:13:53)

Industrial hardware specialists FDB Panel Fittings can now offer a range of hardware that has been specifically treated to facilitate the prevention and control of bacterial infection. This new process is ideal for anything that is powder coated, as well as most moulded items such as grab rails and handles. Standard finish is black but most other colours are possible with anti-bacterial additive in the powder coat.

Professional Thermal Imaging Cameras ‘Talk’ To Meters (29/11/2010 13:10:46)

The FLIR P-Series are thermal imaging cameras for expert thermographers and as such they already contain many smart features for swift and effective predictive maintenance tasks and detailed analysis. The latest generation of these high-end models add to this list another unique FLIR feature that was first introduced in the FLIR i60 and FLIR T-Series cameras. This is MeterLink, wireless connection technology that allows the FLIR infrared camera to capture readings from an Extech clamp meter.

Versatile Machining Centre For Smaller Workpieces (29/11/2010 13:09:38)

German machine tool manufacturer, Hermle, has added a new machining centre, the C 22 U, to the smaller end of its range of vertical-spindle machines. Sole UK agent, Geo Kingsbury Machine Tools, says that the design offers maximum flexibility, as the user can choose between 3- and 5-axis configurations as well as different options for table, spindle, tooling, coolant delivery, swarf management and automation.

Seika Machinery, Inc. Announces Year-End Sale (29/11/2010 13:08:23)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, announces year-end specials on select McDry, Sawa and Sayaka products. To qualify for reduced pricing, orders must be placed by December 17, 2010. The sale will last until stock is sold out on a first-come, first-served basis.

Opening Of New Depot (29/11/2010 13:06:38)

Red Rooster Industrial (UK) Limited announces the opening of their new depot in Stavanger, Norway. Based in the Tananger region the outlet will mirror the excellent products and services offered by existing U.K. outlets located in Aberdeenshire and West Bromwich, West Midlands.

Simufact Expands Engineering Service Team with Dr. Gabriel Barton (29/11/2010 13:04:55)

Simufact Engineering GmbH, a leading provider of software and services in the area of bulk metal forming announced today, that Dr. Gabriel Barton has joined the Simufact team in October this year. Relying on his know-how in the area of incremental forming simulation, Dr. Barton will focus on ring rolling and open die forging applications and will add a new focus and fresh ideas to the engineering service department. His experience in the development of simulation software and models will help Simufact to broaden the application range of the Simufact software.

New Warner Linear Actuators Provide Optimum Solution For Actuation Tasks On Agricultural Vehicles (29/11/2010 13:03:03)

Warner Linear's new range of up to IP65-rated actuators provide the ideal solution for rugged to light duty linear motion tasks on agricultural vehicles. The actuators are easily customised to meet individual customer needs, and provide key user benefits such as maintenance-free operation and long operating life.

Tyrolit Wire Sawing Technology Chosen For New Street Station Redevelopment (29/11/2010 12:58:59)

More than 7,500 tonnes of heavily reinforced concrete containing river gravel aggregate has been cut into blocks and removed during a controlled demolition project at New Street Station in Birmingham. The latest diamond wire sawing machines and consumables from Tyrolit were used to cut 735 square metres of concrete over a continuous work programme ending late November 2010.

Ceramic Liner Is Tougher Than Coal Clinker (29/11/2010 12:54:10)

Kingfisher Industrial has succeeded in providing a ceramic liner wear protection solution to a large coal fired power station, to replace two competitive systems that failed. The Kingfisher solution, the company's K-ZAS Ceramic Liner system is effectively handling the severe abrasion and corrosion resulting from conveying hot coarse clinker to an ash reception hopper.

Data acquisition is on fire at Adept (29/11/2010 12:52:31)

Continuing its growth, Adept Scientific (Letchworth, Herts) has taken on two new members of staff to support its expanding range of data acquisition products (DAQ).

Heason Technology is appointed Preferred Sales Partner UK for Kollmorgen (29/11/2010 12:46:00)

Kollmorgen Europe GmbH, the global motion systems and components manufacturer has signed UK based motion control distributor and systems integrator Heason Technology into its newly launched 'Sales Partner Program'

Cranes Or Vehicle Lifts For Load Handling? (29/11/2010 12:41:23)

The benefits of specifying mechanical load handling on commercial vehicles are generally accepted and understood. In most cases the requirement is to provide employees with assistance to avoid manual handling and remain compliant with health and safety regulations. It is also often possible to change handling processes and introduce efficiency and productivity gains. What is often less clear to many operators are the pros and cons of the different types of load handling equipment. Considerations include the application, loads being handled, the vehicle and where it will operate. In many cases the choice falls between a crane or platform lift.

Micrium RTOS Supports Cypress PSoC 5 ARM Cortex-M3 Development Platform (29/11/2010 12:40:14)

Cypress Semiconductor Corp. and Micrium, Inc. announced that Micrium's uC/OS-III RTOS (Real-Time Operating System) supports Cypress's PSoC(r) 5 development platform. The unique programmable analog and digital peripherals in PSoC 5, along with the high performance 32-bit ARM(r) Cortex(tm)-M3 processor, position PSoC 5 for demanding applications such as industrial, medical, automotive, and consumer equipment. PSoC 5 devices offer industry-leading integrated analog resources and powerful, PLD-based Universal Digital Blocks for implementing standard and custom digital peripherals.

The Minelli Corporation Appointed as Swiss Distributor of Electrox (29/11/2010 12:07:23)

The UK's leading manufacturer of laser marking systems has further expanded its overseas operation with the appointment of a new Swiss distributor. Hertfordshire-based Electrox, which is part of the 600 Group, has appointed The Minelli Corporation as sole distributor to the Swiss market, meaning Electrox now exports lasers to more than 20 countries worldwide.

EMKA Pin Down Costs With Polyamide Hinges (29/11/2010 11:49:09)

EMKA – market leaders in "everything but the enclosure" are pleased to offer yet another way for specialist enclosure builders to reduce costs and enhance quality. Polyamide versions of the popular 1056 series butt hinges are now available at huge cost reductions – dependent upon size, in the order of half the equivalent zinc die hinge.

PBMN Pressure Transmitter Uses Piezo-resistive And Thin-film Technology (29/11/2010 11:47:32)

Baumer's industrial pressure transmitter PBMN achieves maximum precision in measuring both low and high pressures by using different sensors. For pressures below 60 bar, a piezo-resistive silicon sensor is used. A metal thin-film sensor ideally suited for higher pressures is available for pressures over 60 bar. The robust PBMN pressure transmitter covers measuring ranges from -100…100 mbar to 0…1600 bar. It is available in three classes of accuracy: 0.1 % F.S., 0.25 % F.S., and 0.5 % F.S. Boasting a combined error of only < 0.4 % F.S., the sensor provides 0.1 % F.S. of long-term stability. The choice of output signals includes 4…20 mA as well as several types of voltage. With its wide measuring range and high overpressure resistance, the PBMN is qualified for a very broad spectrum of applications. The PMBN is easy to configure using Baumer's programming device FlexProgrammer 9701.

IPUC 2011 - ‘Adapting Pumping Systems For An Era of Limited and Expensive Power’ (29/11/2010 11:44:15)

In the past pumping systems were designed taking into account the old realities of abundant and relatively cheap electricity. Production stability and reliability was king. Now power supply is limited, unreliable and increasingly expensive. IPUC 2011 will focus on latest developments around the world designed to address this new environment and how to modify existing systems without incurring a crippling financial burden. Particular emphasis will be placed on the utilities – water and electricity – where the World in general and Africa in particular, face impending crises of supply and infrastructure failure, with vast implications for health and quality of life. We all know that the end result should be pumping systems facilitating lower production costs and higher profits for the operator, together with less pressure on both electricity supply capacity and the environment, but how do we get there? Join us at IPUC 2011 to find out!

SKF’s Turbocharger Ball Bearing Unit boosts engine efficiency, saves fuel and cuts C02 emissions (29/11/2010 11:37:04)

SKF, has developed an innovative new ball bearing unit to improve the performance of turbochargers, cutting fuel consumption by up to 2% and reducing C02 emissions by 3%, by comparison with traditional plain bearing systems. Ideal for use in a wide range of applications across industry, including in the car, truck, marine, energy, construction and agricultural sectors, the Turbocharger Ball Bearing Unit is set to become an indispensable tool in the effort to cut fuel consumption and improve overall engine performance.

Southern Manufacturing 2011 Stand no. L37 (29/11/2010 11:34:57)

The laser, which celebrated its 50th anniversary in 2010, is a technology in which TRUMPF is a world leader both as a manufacturer and an innovator. The company's laser programme encompasses rod, fibre, disk, diode and CO2. It applies this technology to a range of production processes but at Southern Manufacturing 2011 TRUMPF focuses on just two - micro machining and laser marking.

Carter Manufacturing Limited Achieves Aerospace Quality Management Standard AS9120 (29/11/2010 11:32:17)

Carter Manufacturing Limited is pleased to announce that it has been awarded certification to AS 9120-B, the quality management standard specifically developed for the aviation, space and defence industries.

Multitest Develops Innovative LCR Concept for Cost Efficient, High-Performance Test Interface Boards (25/11/2010 15:56:09)

Multitest's board division has successfully introduced a new LCR (layer count reduction) concept for high pin count BGA applications. Board customers now will benefit from significant cost savings without sacrificing performance. With the new LCR concept, the layer count of standard pitch BGA boards can be reduced by up to 40 percent.

Fluke's Introduction to Vibration Paper Now Available Online (25/11/2010 15:48:06)

In recent years, machine vibration has become an important diagnostic tool in preventive maintenance for processing and production facilities. While some machines such as oscillating sanders use vibration to remove materials and finish surfaces, most industrial devices are engineered to operate smoothly and without vibration. The Fluke paper is addressed to those who work with machines that should not vibrate, such as electric motors, rotary pumps and compressors, and fans and blowers. In those cases, the presence of vibration can indicate problems or deterioration in the equipment. If the underlying causes are not corrected, the unwanted vibration itself can cause additional damage.

P. D. Circuits Promotes Joe Helms to Vice President of Sales & Marketing (25/11/2010 15:40:27)

P. D. Circuits, Inc., specializing in delivering the highest quality PCBs, technical support, and service to OEM and EMS companies worldwide, announces the promotion of Joe Helms to Vice President of Sales & Marketing.

Seika Machinery’s Michelle Ogihara Appointed to SMTA Board of Directors (25/11/2010 15:37:58)

Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, announces that Michelle Ogihara, Sales & Marketing Manager, has been appointed to the Board of Directors for the Surface Mount Technology Association (SMTA).

Aqueous Technologies Appoints Jay Liang as Production Manager (25/11/2010 15:30:58)

Aqueous Technologies Corp., North America's largest provider of batch defluxing systems, announces the appointment of Jay Liang as Production Manager.

Lack Of Wear Protection Is Costing Uk Bulk Handling, Extraction, & Recycling Industries £millions Annually (25/11/2010 15:21:49)

Wear protection - the process of coating or lining process plant and equipment, such as cyclones, valves, bunkers, pipework, chutes (et al), with ceramics, metallics or polymers to extend their life, - is under-employed in the UK. This is resulting in unnecessary maintenance costs and lost production time running into millions of pounds per annum for British bulk handling, extraction and recycling industries.

Machine Protection - Preventing Damage And Failing Safe (25/11/2010 15:18:50)

Protecting machinery and systems against expensive failures and costly downtime is critical in today's competitive market. Neil English of Altra Industrial Motion looks at the technologies available to protect machinery against overloads and to provide safe stopping and holding.

Wire piercing TeePlug gets straight to the point… (25/11/2010 15:09:49)

UK volume electrical and electronic component supplier, Hylec-APL, has expanded its innovative range of Weatherproof plug and socket TeePlug connectors with a quick installation, wire piercing model. The wire piercing TeePlug can be installed at any point along an electrical cable with no preparation or tools required and offers up to IP65 protection.

Innovative New Product Microsite Connects Engineers To The Latest Technologies From Component Manufacturers (25/11/2010 15:05:32)

Farnell has launched its Technology First New Product microsite. The innovative new site provides clear and comprehensive information about the very latest products and technologies from the electronic industry's leading component manufacturers, and makes it easy for engineers to select and design-in devices that can give them a crucial competitive edge.

iX - The world's most graphic HMI solution (25/11/2010 15:00:52)

Industrial visualization is in a state of change. Now, industrial user interfaces take on inspiration from consumer-oriented products like personal computers, mobile phones, MP3 players, etc. with advanced 3D-style graphics, icon based navigation and controls. However, impressive user interfaces have a wider perspective reaching beyond the good looks. They motivate users and operators to interact with the working environment in a positive way. The traceable consequence is a more efficient work flow and reduced downtime - both factors which lead to increased profit.

MSR Turning Table Drive Solutions (25/11/2010 14:49:59)

MSR dramatically simplifies the turning table mechanical transmission system. In many cases, it is also much more economical.

Seika Machinery’s Michelle Ogihara Co-Hosts Successful SMTA Women’s Leadership Connection (25/11/2010 14:48:14)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, announces that Michelle Ogihara, Sales & Marketing Manager, co-hosted the Women's Leadership Connection on Monday, October 25, 2010 in the Ocean room of the Walt Disney World Swan and Dolphin Resort. The wine and cheese reception was the first event that Ogihara helped to host since being appointed to the Board of Directors of the Surface Mount Technology Association (SMTA).

Brevini Repair Service Rejuvenates Wind Turbine Drive (25/11/2010 14:45:25)

The main drive gearboxes of wind turbines are well known to suffer in-service performance issues. The relatively rapid growth of this market, and the ever increasing demand for higher energy generating capacity, has meant that as fast as existing designs have been improved upon; newer, larger gearboxes with potentially new issues have entered the market. The result is a large number of main drive gearboxes that are in need of periodic repair and refurbishment.

Arrow Expands Embedded Platform Concept With Series Of New Modules (25/11/2010 14:34:30)

Arrow Electronics has presented a series of new development modules based on the Arrow Embedded Platform Concept (EPC). Since its introduction in 2009, the distributor has continually expanded the EPC concept with new hardware, software and engineering services to deliver system solutions for a wide range of potential industries and enable the rapid market launch of new applications.

Ethernet Direct Announces a Popular Cost Effective Industrial PoE Switch CUE-500 Recognized in IP Surveillance Applications (25/11/2010 14:31:21)

Ethernet Direct Corporation, a professional and primary provider of industrial networking and communication solutions, is pleased to announce CUE-500, a popular Industrial Power over Ethernet switch CUE-500 widely used in IP Surveillance applications.

Ethernet Direct Offers Free Tutorial on Industrial Ethernet (25/11/2010 14:30:41)

Ethernet Direct Corporation, a professional and primary provider of industrial networking and communication solutions, offers comprehensive, automated and user-friendly free tutorial via E-learning about Industrial Ethernet. Just click www.ethernetdirect.com and go to EDucational link to avail of FREE membership.

EAL Executive Calls For Collectivism To Support Sustainable Growth (25/11/2010 14:27:52)

Elizabeth Bonfield, Head of Business Development at EAL (EMTA Awards Limited), has called for training providers, employers and the Government to work together to deliver the Government's skills strategy, which was published last week.

100W Low Profile PCB-mountable Power Supplies (25/11/2010 14:22:04)

Power supply expert TDK-Lambda EMEA has upped the output power of its ZPSA series of compact PCB-mountable AC-DC power supplies with the introduction of a 100W model. The new single-output ZPSA100 accepts a wide input voltage range, has a very low profile (26.6mm) and industry standard footprint (127 x 76.2mm), making it an ideal choice for applications such as LED signage and lighting, point-of-sale equipment, datacom, video/audio routers and test & measurement equipment.

New Gear Milling Cutter Aids Wind Power Industry (25/11/2010 14:16:31)

Aware that the wind power segment is experiencing growth in the region of 30 per cent year-on-year, cutting tool and tooling systems specialist Sandvik Coromant is introducing CoroMill® 170, a gear milling roughing disc that speeds up the machining times of critical wind turbine gearbox and transmission components.

Arc Flash Video Tutorials (23/11/2010 14:49:07)

ARCAD announces the release of a set of new ARC FLASH ANALYTIC video tutorials. ARC FLASH ANALYTIC tutorials are videos providing a quick and easy method to learn a variety of ARC FLASH ANALYTIC features and capabilities. The set includes 8 video tutorials starting from how to install and register the program, to more advanced functions like how to save projects, switch units of measurement, customize arc flash warning label layout and perform arc flash hazard analysis using ARC FLASH ANALYTIC's IEEE 1584 Empirical Model, Fuse Equations and Low Voltage Circuit Breaker Equations calculation modes.

Measurement Computing announces IOtech integration (23/11/2010 14:47:36)

Following the integration of IOTech's data acquisition products into the Measurement Computing Corporation (MCC) range earlier this year, Adept Scientific (Letchworth, Herts) is pleased to announce its position as the sole UK distributor of MCC and Iotech DAQ products. This will enable Adept to better serve the DAQ community and give customers increased data acquisition flexibility.

Renishaw To Focus On Measurement And Motion Control At Southern Manufacturing Show (23/11/2010 14:44:33)

Renishaw's wide range of measurement products help manufacturers gain more throughput from existing assets, increase machine automation, reduce manual intervention, reduce rework, concessions and scrap, and increase machine capabilities.

Intertronics Announce New Dymax LED-curable Adhesives For Medical Device Assembly (23/11/2010 14:43:03)

Intertronics specialize in adhesives for high-tech, high-performance industries such as medical device assembly companies, so they are particularly pleased to announce a complete system of UV adhesives and LED curing from technology partner DYMAX specifically with assembly of medical devices in mind. DYMAX UV adhesives cure upon exposure to light. Their ability to cure in seconds enables faster processing and greater output resulting in lower processing costs.

Zytronic’s PCT™-Based Touch Sensors Help JEA Technologies Transform High Street Store Fronts (23/11/2010 14:39:25)

Zytronic has collaborated with its Australian systems integration partner JEA Technologies to bring heavy duty touchscreen functionality to the J-Vue series of interactive display units. JEA is using the Zytronic's innovative touch sensing products based on its proprietary Projected Capacitive Technology (PCT™).

RK DuoLine 160 (23/11/2010 14:34:53)

According to Rose+Krieger this new generation of RK DuoLine linear units, which are supplied with a spindle or timing belt will bring greater flexibility to automation. Thinking about on which side the motor drive should be positioned is no longer necessary. Optional coupling and motor adapters can be attached to all four hollow shaft outputs on the idler unit. Not only does this simplify positioning, customers can also configure and adjust the axial motor themselves.

Catalog Data Solutions Catalog and CAD Download Solution Selected by Bay Fastening Solutions, Inc. (23/11/2010 14:28:36)

Catalog Data Solutions (CDS), a leading provider of online solutions for industrial suppliers, today announced that Bay Fastening Solutions, Inc. has selected its Catalog and CAD download solution for their website.

Launch of Precision Manufacturing contract electronic manufacturing services at Northampton (23/11/2010 14:24:51)

Solutions Group (UK) plc of Northampton has announced that it is launching a new company to become a major new player in the Electronic Manufacturing Services (EMS) industry. The new company, Precision Manufacturing Ltd - PML, is to provide high quality contract printed circuit board and box build assemblies for the electronics and electromechanical industries in the UK.

Low cost gantry suits biomedical pick and place automation (23/11/2010 13:50:24)

Heason Technology has developed a new range of low-cost Cartesian style gantry positioning systems for pick and place applications in the growing biomedical and laboratory automation market and other industries where medium precision and medium duty robotic handing for assembly or parts sorting is required.

New Schaltbau LV500 high ampacity charging connector (23/11/2010 13:49:27)

The new LV500 Series charging connector introduced by Schaltbau supports high ampacity for rapid charging, with nominal loads up to 500A. It is designed for use with industrial vehicles, lift trucks and battery chargers, and supports modern fast-charging technology.

World’s Most Compact Drive with an Integrated Motion Controller (23/11/2010 13:48:15)

MICROMO is pleased to announce a new 22mm innovation that extends the portfolio of the BX4 range of four pole brushless DC servomotors from FAULHABER. The series 2232 / 2250…BX4 CSD/CCD is the world's most compact drive with an integrated motion controller. This new series combines all the advantages of the BX4 four pole brushless technology with a single axis motion controller. High reliability, high torque, compact slotless design with no cogging torque, and robust construction without the use of adhesives make this new series ideal for complex applications such as robotics, automation, medical and laboratory technology, specialty machinery and aerospace.

Techcon Systems Debuts TS1254 Pressure Pot (23/11/2010 13:46:57)

Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, introduces the new TS1254 Pressure Pot. The new mid-sized pressure pot is designed to accommodate low to medium viscosity fluids, including solvents, adhesives and Cyanoacrylate (CA).

A Brochure With Practical Information: Distance And Angle Measurement In Mobile Machinery Applications (23/11/2010 13:43:43)

A new resource brochure that provides a summary of linear and angular feedback measurement for mobile construction machinery, agricultural equipment, and other harsh environment applications is available from Variohm EuroSensor. The four page brochure from Variohm's distribution partner Novotechnik highlights application specific requirements for environmental protection, safety considerations and specification requirements, and includes an overview of standard products as well as customer-specific options available from the German sensor technology specialists.

ON Semiconductor introduces highest efficiency charge pump with power saving CABC mode for smartphone LED backlighting (23/11/2010 13:40:43)

ON Semiconductor (Nasdaq: ONNN) a premier supplier of high performance silicon solutions for energy efficient electronics has introduced the CAT3649, a 6-channel, high efficiency Quad-Mode® LED driver for use in the latest smartphones and other consumer handheld applications such as digital still cameras and portable media players. The Quad-Mode® architecture coupled with Content Adaptive Brightness Control (CABC) ensures market leading efficiency in LED backlighting using only external capacitors.

New website for LG Motion provides resource for motion control applications (23/11/2010 13:38:30)

LG Motion Limited has given its website a complete face-lift to bring together its growing range of specialist motion components, assemblies and systems, and to provide a unique resource for system builders and OEMs who require precision motion for their machine designs. As you would expect, the new website at www.lg-motion.co.uk includes a full section on the comprehensive range of products available from the Basingstoke based motion specialists but an additional Applications section is presented that that lists an objectives/solutions/benefits analysis for a number of real applications in industrial, nuclear, aerospace, and scientific research markets.

New Line Laser Announced (23/11/2010 13:37:39)

STEMMER IMAGING announces the availability of the new ZM18-DM multi-purpose line laser from Z-Laser. Capable of producing structured lighting for 3D measurement, surface inspection, and alignment applications, the ZM18-DM is available in red, blue and IR wavelength versions with output powers up to 200mW.

Aqueous Technologies Hires Experienced Electrical Engineer (23/11/2010 13:36:29)

Aqueous Technologies Corp., North America's largest provider of batch defluxing systems, announces that it has hired Anthony Reboja as its new Electrical Engineer.

Breakthrough IR5500 Open Path Gas Detector Leads Industry in Early Detection (23/11/2010 13:31:55)

With an advanced feature set, the new IR5500 Open Path Gas Detector from General Monitors redefines the industry standard as the first and only open path detector to meet agency performance requirements on both the LEL•meter and ppm•meter scales, is the industry's first detector with split range scale for ppm•meter and LEL•meter monitoring, is the first to be certified for operation at -55ºC and is among the first major open path detectors certified to FM approvals, EN, and IECEx performance standards.

MARTIN to Demonstrate Stand Alone QFN Solder Bumping and BGA Reball Unit at the SMTA Arizona-Sonora Expo & Tech Forum (23/11/2010 13:30:52)

The unit can handle the complete QFN solder bumping process, even for the smallest pitches. Using unique Hotprint Technology, the mask is not removed after printing paste but remains on the QFN during reflow.

Ethernet Direct Offers PROFIBUS to RS-232/422/485 Converter For Industrial Automation (23/11/2010 13:28:04)

Ethernet Direct Corporation, a professional and primary provider of Industrial Networking and communication solutions, offers Panda series products which are specifically designed for PROFINET and PROFIBUS solutions. Ethernet Direct is also one of the very few Industrial equipment vendors to offer product solutions for Process Field Bus and can be used in equal measure in production automation and process automation.

Ethernet Direct Announces New EDS-741WH Industrial IP66 Rated Outdoor Dome IP Camera (23/11/2010 13:27:14)

– Ethernet Direct Corporation, a professional and primary provider of industrial networking and communication solutions, announces EDS-741WH which is a new generation industrial surveillance outdoor fixed camera for industrial surveillance applications.

Anders Announces New, High-Performance, Low-Power Computer-on-Module (23/11/2010 13:23:35)

Based on the advanced Marvell Armada 510 system-on-chip, the Anders CM-A510 is ideal for demanding high-end industrial and medical products - offering low power consumption, powerful processing capability, and a rich set of media, connectivity and storage features.

AVL Engineers 100 New Uk Jobs To Cope With Market Demand (23/11/2010 13:19:42)

AVL, the world's largest privately owned engineering company with more than 20 technical centres worldwide, is to employ up to 100 new members of staff in the UK over the next two years.

ESAB Launches Comprehensive Range Of Roller Beds (23/11/2010 13:10:58)

ESAB has launched a comprehensive range of roller beds to help improve the productivity and quality of round fabrications such as wind turbine towers, pipelines and vessels.

Frankley, It’s A Mixing Success (23/11/2010 13:09:44)

Large static mixers made by Chemineer are proving a successful addition to Severn Trent Water's water treatment works (WTW) in Frankley, Birmingham, where Morgan Sindall has completed a £31.35M upgrade.

Farnell recognised for outstanding achievements by Bourns, International Rectifier, Emerson Network Power, LeCroy, TDK-EPC and Microchip at electronica 2010 (23/11/2010 13:07:44)

Farnell, the leading multi-channel, high service distributor of electronic and industrial products, has been presented with a multitude of awards at this year's electronica. The awards from leading suppliers such as Bourns, International Rectifier, Emerson Network Power, LeCroy, TDK-EPC and Microchip are a reflection of the company's continuous drive to accelerate electronic design engineering growth through its multi-channel strategy and driving sales and engagement via the web with element14, the company's one–stop online technology resource and community created exclusively for electronic design engineers.

Count On Tools Now Manufactures Manncorp Selective Solder Nozzles (23/11/2010 13:06:09)

Count On Tools Inc., a leading provider of precision components and SMT spare parts, introduces Manncorp Selective Solder Nozzles for the IS-450 range of selective soldering machines.

ETV 0552 with a Glass Touch Screen and IP65 Protected - Small but Powerful: Control Panels with EDGE Technology in 5.7 Format (23/11/2010 13:02:56)

The powerful, all-in-one ETV control panel series from SIGMATEK was expanded by two new panels with a 5.7 touch display. The ETV 0551 is equipped with an analog resistive TFT color touch screen (IP 54). The ETV 0552, which is equipped with a glass touch screen and frontal IP65 protection against dust and water, is even more robust. Because there is no offset edge between the glass touch screen and the frame, the panel can be easily cleaned. The ETV 0552 is therefore ideal for use in raw industrial environments as well as in food processing, packaging and medical technology.

Tekdata and SEA Succeed In Subsea Wiring Project (23/11/2010 12:04:10)

Tekdata Interconnections has successfully completed custom wiring for an underwater analysis pod designed to operate up to 100 metres depth, enabling its customer, defence contractor Systems Engineering and Assessment Ltd (SEA), to deliver the completed pod within tight constraints on time and cost.

‘Sudlows scoop M.E.N Business of the Year award’ (23/11/2010 12:03:05)

Data Centre design and build specialist Sudlows, walked away victorious from the 2010 M.E.N Business of the Year awards last night, after securing the prestigious title of 'Business of the Year with turnover under £10m'.

Logicalis IDs Top Decision Points in Cloud Security (23/11/2010 12:01:29)

–"To the cloud." Everyone has seen the slew of commercials these days promoting use of the cloud – for consumer as well as business use. And now IT pros are feeling the pressure to move data – sometimes even business-critical data - into the cloud. CFOs and CEOs anxious to save money and increase usability of corporate computing systems are turning up the heat, and CIOs and IT managers have to know what to put in, who can manage it, and how to keep it safe.

TraceParts at electronica 2010 exhibition (23/11/2010 12:00:45)

electronica 2010, the world's leading trade fair for components, systems and applications, was staged for the 24th time between November 9 and November 12, 2010 in Munich. At this year's event there was a presentation of online solutions at the RS Components and Phoenix Contact booth based on collaboration with TraceParts.

Rigibelt Non-magnetic Telescopic Linear Actuator From Serapid Features New Drive Unit (23/11/2010 11:59:28)

SERAPID, a leader in mechanical lift and Rigid Push-Pull Chain Technology introduces a new drive system for their non-magnetic telescopic linear actuator - the RigiBelt.

Colortrac expands global operations by opening of a new office in Yokohama, Japan as its strategic support center. (23/11/2010 11:58:36)

Colortrac, an important innovator in the field of wide format scanning technology, announced the opening of a new office in Yokohama, Japan as part of a continued expansion of Colortrac's global business.

Colortrac Expands Senior Management Team (23/11/2010 11:56:34)

Robert van Brakel Appointed Marketing Manager

Landia reach over 100 anoxic mixers with Yorkshire Water Services (23/11/2010 11:55:27)

Two years into its five-year £1.5M Single Source Supply Framework Agreement with Yorkshire Water Services, Landia has completed the installation of over 100 Anoxic/Selector POP-1 mixers.

NVision Helps Soft Air Produce Handgun Replica Three Months Faster (23/11/2010 11:48:54)

Soft Air USA used NVision's laser scanning services to save three months in getting an Airsoft replica of FN Herstal's FNP9-17 handgun to market. This is a significant time-savings over Soft Air's previous process, which involved making silicon molds of real guns and using the molds to create injection molds that in turn make the replica Airsoft guns. Laser scanning saves time because it eliminates the need for manual touchup of the silicon mold and the resulting CAD model of the real gun can then be electronically sent to manufacturers in Asia.

SKF’s Rotor Positioning Sensor Bearing Unit cuts fuel consumption and C02 emissions (23/11/2010 11:45:59)

SKF, the world's leading knowledge engineering company, has launched the new Rotor Positioning Sensor Bearing Unit designed to improve the performance of automotive electric power steering systems, the new bearing unit can reduce fuel consumption by around 0.2-0.3 litres/100km and C02 emissions by up to 3%, compared with conventional hydraulic steering systems.

Wilson Process Systems expands electro-mechanical capabilities in response to customer demand (23/11/2010 11:14:04)

Wilson Process Systems (WPS), the leading contract manufacturer, is responding to changing customer requirements by strengthening its electro-mechanical assembly capabilities. The company - best known for high quality PCB assembly - has now restructured and formalised its complete system solution services, enabling it to ship fully finished products ready for use or sale, direct to end-customer sites.

Acculogic and ScanCAD to Host Testing and Reverse Engineering Workshops at ACI (23/11/2010 11:13:26)

Acculogic's Manufacturing Test Systems Division, a global leader in electronics test and production solutions, will co-host two one-day workshops titled "Flying Probe Testing and Reverse Engineering of Circuit Boards" with ScanCAD International on Tuesday, December 7 and Wednesday, December 8, 2010 from 9 a.m.-3 p.m. The free workshops feature complimentary lunch and will take place at ACI Technologies, Inc., which is located at 1 International Plaza, Suite 600, Philadelphia, PA 19113.

Molex unveils Brad® IO-Device protocol development kit version 2.2; Designed to bring PROFINET communication to industrial device equipment (23/11/2010 11:07:24)

Molex Incorporated introduces the Brad® IO-Device protocol development kit version 2.2 for PROFINET that enables OEMs to develop and market their own branded PROFINET IO devices. Fully-compliant with PROFINET IO version 2.2 specifications, the Molex protocol stack supports conformance Class-B and has already been integrated on customer system platforms and successfully PNO-certified by the PROFIBUS User Organisation.

X-Rite’s Enjoys K2010 Success as Visitors Flock to See Latest Color Control Innovations (23/11/2010 11:06:17)

– X-Rite Europe GmbH (NASDAQ: XRIT)'s presence at leading trade show K2010 proved a huge success, with the company's stand becoming a hub for delegates wanting to discover how to maintain the color quality of plastics. X-Rite showcased its wide range of established and innovative color management solutions. In exclusivity they also presented the new Automated Closed-Loop Color Control (ACLCC) system developed for plastic extrusion processing. The ACLCC solution is developed in collaboration with Plastore Inc, a leading manufacturer of volumetric and gravimetric color feeders in North America. The solution optimizes operator efficiency while ensuring consistent color quality throughout a production run. K2010 was held in Düsseldorf, Germany, from 27 October to 3 November.

Freescale DSP Family Delivers New Levels Of Performance For The Next Wave Of Wireless Base Station Deployments (23/11/2010 11:03:27)

Powered by the industry's highest performing fixed-point DSP core, the flexible MSC8157/58 product family supports a variety of air interfaces with a simple software switch

International DAQ Survey Highlights Equipment Trends (23/11/2010 11:01:45)

HBM – the global leader in data acquisition and analysis – has recently completed an international survey to gain a better insight into the market and how it is evolving. HBM says, "The world of data acquisition and analysis is changing rapidly as companies launch products with markedly reduced development times and with increasingly complex technologies".

Pioneer Selects Cypress CapSense® Solution for New Cordless Phone Line (23/11/2010 11:00:18)

Cypress Semiconductor Corp. (Nasdaq: CY) today announced that Pioneer has selected its CapSense® solution to implement the capacitive touch-sensing controls in the SD8200 family of cordless digital phones. A single CapSense device controls 22 capacitive buttons on the phones, including illuminating the buttons when selected.

Cypress Passes 750 Million Mark in Shipments of PSoC® Programmable System-on-Chip Devices (23/11/2010 10:59:17)

Cypress Semiconductor Corp. (Nasdaq: CY) today announced it has eclipsed the 750 million unit mark in shipments of its fast-growing PSoC® programmable system-on-chip. The world's only programmable analog and digital embedded design platform combines analog and digital peripheral controllers with memory on a single piece of silicon, maximizing designers' flexibility.

R&D Technical Services Announces Its 15th Year in Business (23/11/2010 10:58:03)

Vapor phase manufacturer R&D Technical Services Inc. announces that it will celebrate its 15th year in business in 2011. Since its founding in 1996, R&D Technical Services has led the way in reflow and rework solutions.

New FasTest Brochure Features Complete Line of TwistMate® Products for Secure Connections to Threaded Ports and Fittings (23/11/2010 10:53:42)

advanced machinery, materials and engineering services,

Seika Machinery, Inc. to Exhibit at the SMTA Arizona-Sonora Expo & Tech Forum (23/11/2010 10:52:17)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, will highlight its McDry Electronic Drying Storage Cases and HIROX 3-D Digital Microscopes at the upcoming SMTA Arizona-Sonora Expo & Tech Forum, scheduled to take place Wednesday, December 1, 2010 at the Fiesta Inn Resort & Conference Center in Tempe, AZ.

New From Mayr Transmissions - Primeflex Plug-in Bellows Coupling (23/11/2010 10:51:07)

Mayr's brand new primeflex® is a high quality steel bellows plug-in type coupling featuring an innovative internal design feature that allows the unit to be dismantled without damaging the bellows even after extended periods of use.

New Wardjet Live Remote Programming Camera Available (23/11/2010 10:49:08)

Free remote access, live video and Voice-Over IP (VOIP) customer support are standard features of all WARDJet X-Classic or XL controllers purchased with a new WARDJet waterjet cutting table. A new option is now also available - a Live Remote Programming Camera. It can be used for highly accurate and fast edge alignment of the metal sheet on the cutting table as well as reverse engineering/digitising applications.

Cypress CapSense Touch Scroll in Microsoft Mouse (23/11/2010 10:48:25)

Cypress Semiconductor Corp. (Nasdaq: CY) today announced that Microsoft's revolutionary new Arc Touch Mouse uses the Cypress CapSense(r) solution for the touch scroll strip that lets users navigate documents and Web pages without using the on-screen scroll bar. The CapSense-based scroll wheel delivers a smooth, comfortable navigation experience as opposed to the jerky scrolling that some mechanical wheels provide.

New High Power Professional 24v Battery Booster Pack From GYS (23/11/2010 10:44:20)

New from GYS the French Battery Charger manufacturer is GYSPACK PRO 12.24, a brand new self-contained 12V and 24V booster pack designed for high performance and long life.

Energy Minister: Energy Future Is About Smarter Changes In Technology And Resources (22/11/2010 17:20:58)

Giving the Coalition Government's views on the future issues of energy policy, Charles Hendry MP, Minister of State for Energy, said BEAMA members are playing a major role in the energy market and the electrotechnical industry has a key role in facing the challenges and opportunities.

New Range Of Neat Oils From Master Chemical (22/11/2010 17:17:53)

The new TRIM® TEC™ range of chlorine-free neat oils from Master Chemical uses the highest quality synthetic and semi-synthetic hydrocracked base fluids together with carefully selected additives to improve cutting and grinding performance. Developed in Europe specifically for European manufacturers, the range is comprehensive and provides many advantages over standard mineral oil based products.

CISSOID unveils THEMIS and ATLAS, their Driver for Silicon Carbide Switches in efficient and reliable Power Converters and Motor Drives (22/11/2010 17:16:44)

CISSOID, the leader in high-temperature and high reliability semiconductor solutions, unveils THEMIS and ATLAS, their power transistor driver chipset meant for high efficiency motor drives and power converters. THEMIS and ATLAS are especially designed to drive seamlessly the most advanced power switches, including Silicon Carbide (SiC) MOSFETs and JFETs as well as Silicon IGBTs and MOSFETs. The chipset is the cornerstone of energy-saving, reliable power converters and motor drives.

Fastening & Assembly Exhibition Assists Southwest Manufacturing Industry (22/11/2010 17:14:54)

Manufacturing industry in the Southwest will next year benefit from the UK's best-known forum for fastening assembly and industrial adhesives technologies – the FAST & IASE Exhibitions – being held near Yeovil on 12th May 2011.

Spelsberg thermostat units ensure protection… (22/11/2010 16:42:07)

Spelsberg has introduced a range of IP65 'ready to run' thermostats that are ideal for pipe or vessel trace heating and general temperature maintenance in Industrial Processing applications where extreme temperatures can be encountered.

Powersolve enhances UPS offering with versatile eight model PKR Series (22/11/2010 16:15:44)

Powersolve, recognised as a leader in power supply technology, has added to its uninterruptible power supply offering with the launch of the versatile PKR Series. The eight model PKR Series will satisfy a wide range of IT and Telecoms applications although Powersolve says PKR units can also be used in most back-up situations where constant and reliable power is required for short periods in the event of mains supply failure.

Elscint vibratory feeder for steel tubes (22/11/2010 14:54:45)

Elscint Automation, the leading vibratory parts feeder manufacturer from India recently manufactured a bowl feeder for feeding of steel tubes of various sizes. There were a total of 6 tubes.

DLRx Load Cells for Precise Force Measurement (22/11/2010 14:53:46)

With the high-precision load cells of the DLRx series, Baumer offers sensors with passive temperature compensation for direct force measurement which boast a very low temperature effect of only < 0.005 %/K. Their high precision and positioning accuracy is supported by their very small amount of distortion. Complying with protection class IP67, they are suitable for use in the packaging industry, mechanical engineering, and many other industrial applications. The sensors cover measuring ranges from 0…+/- 500 kN with a combined error of only < 0.1 % F.S. and repeat accuracy of < 0.03 % F.S.

Production Solutions Announces New Three-Year Warranty (22/11/2010 14:52:13)

Production Solutions Inc., manufacturer of the Red-E-Set Board Support, announces that the company now offers the industry's best warranty on its RED-E-SET printed circuit board (PCB) support. The RED-E-SET product line now is covered with a three-year warranty.

Save Money With the NIKKO POWER CYCLONE from Seika Machinery, Inc. (22/11/2010 14:49:42)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, announces that NIX OF AMERICA's NIKKO POWER CYCLONE reduces costs with longer lasting brushes. Unlike adhesive roller type cleaners, the NIKKO POWER CYCLONE requires minimum supervision and the brush needs to be replaced only once a year.