Pressure transducers measure absolute or gauge pressure- Cerabar PMP11, 21 and 23

Pressure transducers measure absolute or gauge pressure

Home > Machining > Pressure transducers measure absolute or gauge pressure

18th October 2016

Source: Endress+Hauser Inc.

Pressure transducers measure absolute or gauge pressure

The Cerabar PMP11, 21 and 23 pressure transducers have been introduced by Endress+Hauser that measure up to 6,000psi and are factory spanable to specific application requirements. The transducers are available with threaded or welded hygienic process connections, meet a variety of industry standards including FDA, FM, IEC and Ex, and provide 4-20mA or 0-10VDC output signals.

These durable and reliable transducers provide excellent performance. The Cerabar PMP11 and PMP21 pressure transducers measure pressures from -15-6,000psi at temperatures from -40 to 212°F with accuracy of 0.5% and 0.3%, respectively.

The Cerabar PMP23 pressure transducers measure pressures from -15 to 600psi at temperatures from 14-212 °F with accuracy of 0.3%. The IP69 housing and process isolating diaphragm is 316L stainless steel. Fully welded hygienic process connections without additional adapters or O-rings are available for wash-down applications. The PMP23 can be used in CIP and SIP applications at temperatures up to 275°F for a maximum of one hour.

Transducer models with a valve plug can be fitted with the PHX20 local display. The one-line LCD shows measured values, fault messages and information messages. The device display can be turned in 90° steps, making it easy to reorient as required for improved readability.

Like this Article? Register to receive updates here