Nord Drivesystems/Nord Gear

Address:
11 Barton Lane
Abingdon Science Park
Abingdon

OX14 3NB
United Kingdom

Phone: 01235 534404

Fax: 01235 534414

Web: http://www.nord.com


Nord Drivesystems/Nord Gear articles

Displaying 1 - 20 of 78

Extruder-type drives for plastics industry

Extruder-type drives for plastics industry
The NORD DRIVESYSTEMS' drive solutions provide manufacturers in the plastics-processing industry with long service life, the low maintenance and high energy efficiency. For use in extruders, the company offers extruder-type drives that are optimised for heavy-duty operations.
28th January 2020

Condition monitoring for predictive maintenance concepts

Condition monitoring for predictive maintenance concepts
The system from NORD DRIVESYSTEMS regularly or permanently records drive and status data in order to optimise the operational safety and efficiency of machines and plants. Based on this information, concepts for predictive maintenance can also be developed. Fast, efficient and comprehensive evaluation of analogue and digital data (measurements, signals and operating parameters) by the intelligent PLC in the drive electronics forms the basis.
6th January 2020

Cost reduction through efficient energy-saving motors

Cost reduction through efficient energy-saving motors
At SPS 2019 in Nuremberg, NORD DRIVESYSTEMS presented a new synchronous motor with a significant higher energy efficiency (IE5+). This new motor can be supplied without a fan and with very smooth surfaces. It can be combined with the nsd tupH surface treatment. It is therefore optimally suited for use in intralogistics and wash-down applications.The new IE5+ synchronous motors are suitable for intralogistics and wash-down applications as a system solution with gear units and inverters from NORD DRIVESYSTEMS.
11th December 2019


New products from NORD at SPS

New products from NORD at SPS
From 26 to 28 November 2019, one of the most important exhibitions for the automation industry will be held in Nuremberg: SPS. NORD DRIVESYTEMS will once again be presenting new products. The main focus is on an energy-efficient latest generation synchronous motor that considerably exceeds IE4, and on future-proof frequency inverters.
18th November 2019

Decentralised drive technology for the digital factory of the future

Decentralised drive technology for the digital factory of the future
  NORD DRIVESYSTEMS is presenting its decentralised and intelligent drive concepts for the first time in Hall 3A at stand 465 at SPS IPC Drives 2018 from 27th to 29th November 2018. Product highlights include the NORDAC LINK field distributor seriesand NORDAC FLEX as well as the efficient plug-and-play solution LogiDrive.
29th October 2018

Robust frequency inverter for process engineering

Robust frequency inverter for process engineering
An ATEX-compliant, decentralised frequency inverter that not only is particularly economical in operation but also comes in protection class IP 69K, is being offered by NORD DRIVESYSTEMS with the NORDAC BASE – SK 180E. This aims to guarantee the complete sealing of the housing, even for processing applications which require frequent high pressure cleaning.
24th September 2018

Decentralised drive technology by NORD DRIVESYSTEMS

Decentralised drive technology by NORD DRIVESYSTEMS
NORD DRIVESYSTEMS offers decentralised drives, with which even demanding applications, such as synchronised movement and flying saw, can be implemented easily. An integrated PLC and position control within the frequency inverters enables the synchronisation of several drives in master/slave operation.
23rd August 2018

New helical worm gear unit is made from high strength aluminium

New helical worm gear unit is made from high strength aluminium
The two-stage SK 02040.1 helical worm gear unit from NORD DRIVESYSTEMS has been redesigned as the new SK 02040.1 is made from high strength aluminium and replaces the previous cast iron product. The one-piece die cast UNICASE housing guarantees maximum strength and rigidity with low weight. In addition, aluminium is considerably more corrosion-resistant than steel and can be further protected with the aid of additional measures such as the highly effective nsd tupH surface treatment.
7th August 2018

Surface treatment presents an alternative to stainless steel

Surface treatment presents an alternative to stainless steel
To meet the demands posed by special environmental conditions and high hygiene requirements, NORD DRIVESYSTEMS developed the nsd tupH (Sealed Surface Conversion System) anti-corrosion treatment: an innovative surface treatment making aluminium drives extremely robust and durable.
2nd August 2018

ATEX compliant drive systems: a sure thing

ATEX compliant drive systems: a sure thing
Whether in the chemical, pharmaceutical or food industries: flammable gases and dust in processing industries create serious safety risks for people and machines. NORD DRIVESYSTEMS has been a certified manufacturer for many years and since 2003 its range includes ATEX compliant drive solutions such as dust or gas explosion protected motors, gear units and electronic drive technology for Zones 1, 2, 21 or 22.
27th July 2018

A flexible, intelligent field distributor

A flexible, intelligent field distributor
It has been announced that the NORDAC LINK series has been specially developed for applications in modern, networked intralogistics systems and provides a convenient drive solution for flexible, decentralised installation. 
25th July 2018

Intelligent health care for industrial gear units

Intelligent health care for industrial gear units
Industrial gear units are drive technology heavyweights which need to handle large torques. Due to the large forces involved, small defects which are not detected in time can quickly result in complete breakdowns. This would not only be expensive, but also disastrous, major plant components would remain at a standstill until a replacement was delivered and installed.
23rd July 2018

Drive solutions to optimise costs

Drive solutions to optimise costs
The ‘lifecycle costs’ of drive solutions include all of the costs which are incurred, from purchase and commissioning, use and maintenance, up to disposal. To optimise the Total Cost of Ownership (TCO) NORD DRIVESYSTEMS offers individual TCO calculations, integrated concepts for costs and efficiency optimisation as well as powerful and efficient drive technology.
23rd July 2018

PROFIsafe module for increased safety

PROFIsafe module for increased safety
Functional safety of plant and machinery is of vital importance in production. With the SK TU4-PNS PROFIsafe interface module, NORD DRIVESYSTEMS provides even greater safety. The optional module meets the most stringent safety requirements, enables flexible integration of various safety components and ensures secure communication in PROFINET environments.
23rd July 2018

Drives for pallet conveyor technology

Drives for pallet conveyor technology
  It has been announced that NORD DRIVESYSTEMS supplies economical drive solutions with a high overload capacity for the special requirements of pallet conveyor technology.
18th July 2018

Drive solutions with reinforced bearings for agitators and pumps

Drive solutions with reinforced bearings for agitators and pumps
In order to ensure radial and axial load capacities and a higher service life of the gear units, NORD DRIVESYSTEMS offers reliable drive technology with reinforced bearings and increased bearing spacing for the processing industry.
4th July 2018

Cost reductions thanks to standardisation

Cost reductions thanks to standardisation
Different gear units and motor types, sizes, options and gear ratios often result in a large variety of drive versions, which is a considerable cost factor. A reduction in the number of variants can result in optimised processes and costs. The LogiDrive from NORD DriveSystems standardised IE4 geared motor versions are the solution for intralogistics.
29th June 2018

Experience, competence and innovation over 30 years

Experience, competence and innovation over 30 years
In addition to excellent quality and reliability, drive solutions from NORD DRIVESYSTEMS also feature a great depth of production. The drive specialist produces all quality-relevant components in its own facilities. At the beginning of the 1980s, NORD started to produce electronic drive technology in Aurich, Lower Saxony. Over the years, the range of inverters, motor starters and electronics was continually expanded and now includes electronic drive technology up to 160kW. The production location has also been continually extended.
20th June 2018

Drive solutions for digital factories of the future at Hannover Messe

Drive solutions for digital factories of the future at Hannover Messe
Nord Drivesystems will be exhibiting at Hannover Messe next week from 23rd to 27th April with its innovative drive solutions for digital factories of the future. These include NORDAC LINK decentralised field distributors, smart drives with Cloud links for predictive maintenance, as well as LogiDrive - the efficient drive solution for intralogistics that offers a reduction of the number of versions. A PROFIsafe interface module ensures even greater safety in production.
20th April 2018

Corrosion-resistant surface treatment for aluminium drive units

Corrosion-resistant surface treatment for aluminium drive units
NORD DRIVESYSTEMS will be exhibiting its aluminium drive units for the food and beverage industry at ANUGA FOODTEC, from 20th to 23rd March. The lightweight, corrosion-resistant gear units, smooth surface motors, frequency inverters and motor starters in wash-down optimised die cast aluminium housings are extremely robust and durable thanks to a special surface treatment: NORD nsd tupH surface protection.
1st March 2018


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex