Mayr Transmissions Ltd

Address:
Valley Road Business Park
Valley Road
Keighley
West Yorkshire

BD21 4LZ
United Kingdom

Phone: 01535 663900

Fax: 01535 663261

Web: http://www.mayr.co.uk


Mayr Transmissions Ltd articles

Displaying 1 - 16 of 16

Couplings provide accurate measuring results

Couplings provide accurate measuring results
Backlash-free, torsionally rigid ROBA-DS shaft couplings for measuring flanges in dynamometers.
22nd March 2016

Backlash-free ROBA-guidestop safety brakes available in new construction sizes

Backlash-free ROBA-guidestop safety brakes available in new construction sizes
The backlash-free, highly rigid ROBA-guidestop profiled rail brakes guarantee maximum safety. In machine tools and machining centres, they additionally increase the process accuracy and machining performance. mayr power transmission now offer this innovative brake concept in eight construction sizes, covering nominal holding forces from 5 to 34 kN.
2nd July 2015

Backlash-Free ROBA-Guidestop Safety Brakes Available In New Construction Sizes

Backlash-Free ROBA-Guidestop Safety Brakes Available In New Construction Sizes
The backlash-free, highly rigid ROBA-guidestop profiled rail brakes guarantee maximum safety. In machine tools and machining centres, they additionally increase the process accuracy and machining performance. mayr power transmission now offer this innovative brake concept in eight construction sizes, covering nominal holding forces from 5 to 34 kN.
11th June 2015


Next-generation capping heads

Next-generation capping heads
The rustproof ROBA-capping head with their continuous, impact-free torque, apply screw caps made of plastic with a maximum of precision and repetitive accuracy. mayr power transmission has now developed a new, extremely wear-resistant and almost maintenance-free generation of capping heads – for minimum downtimes and maximum plant availability.  
15th January 2015

MAYR, High Performance In A Compact Design Backlash-free ROBA-DS Servo Couplings With Split Clamping Hubs

MAYR, High Performance In  A Compact Design Backlash-free ROBA-DS Servo Couplings With Split Clamping Hubs
The high-performance ROBA-DS shaft couplings transmit the torque backlash-free and with high torsional rigidity. They compensate for shaft misalignment and are both wear- and maintenance-free. On the sizes up to 150 Newton meters, mayr power transmission are going to extend its standard hubs for mounting the shafts by a radially divisible hub – for easy and fast installation, even in difficult ambient conditions.
9th October 2014

Mayr®: Extremely compact multi circuit brake

Mayr®: Extremely compact multi circuit brake
Double safety utilising redundancy also means double the braking torque. On designs with two independent brake circuits, this puts enormous mechanical strains on systems and components. Mayr® Power Transmissions have solved this problem by developing a new multi circuit brake, the ROBA®-quatrostop.
12th July 2011

“Silent Security” - Mayr Launches Range of ‘Silent’ Brake Motors

“Silent Security” - Mayr Launches Range of ‘Silent’ Brake Motors
Mayr Transmissions Ltd. have for many years been regarded as global market leaders in the field of low noise safety brakes and through a joint venture with Gamak Motors UK, Mayr are now able to supply complete brake-motor assemblies in sizes ranging from IEC 71 through to IEC 132 frame.
12th July 2011

New From Mayr Transmissions - Primeflex Plug-in Bellows Coupling

Mayr’s brand new primeflex® is a high quality steel bellows plug-in type coupling featuring an innovative internal design feature that allows the unit to be dismantled without damaging the bellows even after extended periods of use.
23rd November 2010

Brilliantly constant - Hysteresis capping heads for the beverage industry

Due to the constant, impact-free slip torque, hysteresis capping heads are better suited for sealing plastic bottles and non-returnable glass bottles than permanent magnet heads. The technically advanced ROBA®-capping head components by mayr® power transmission are based on the patented ROBA®-contitorque hysteresis clutch, which has been used in the market successfully in various applications for more than 10 years.
21st October 2010

ROBA-contitorque

ROBA-contitorque
Mayr’s range of ROBA-contitorque permanent magnet hysteresis clutch / brake units has been expanded with the introduction of the new size 5 unit increasing the slip torque range to 0,1 to 12Nm.
5th October 2010

Technical Paper Wind power coupling with integrated safety brakes

Wind power plants place high demands on the connection between gearbox and generator. Substantial shock torques together with high shaft misalignments must be adequately catered for during the running life of up to 20 years. It is therefore important to develop a low maintenance solution offering protection against unpermitted overloads and electrical isolation to prevent leakage currents damaging the driveline.
13th September 2010

ROBA-topstop

The perfect safety brake for any vertical / gravity loaded axis, the ROBAâ-topstopâ is a new fully sealed drive-side mounted brake from Mayr Power Transmissions.
8th July 2010

EAS®-Sensor incorporates unique innovation

EAS®-Sensor incorporates unique innovation
Safety clutches provide precise torque limiting to ensure that the loads on components in machines and facilities do not exceed allowable levels. Up to now they have required an external limit switch and associated cable to send a signal to the controller if an overload situation occurs. The new EAS®-Sensor safety clutch with integrated signal transmitter developed by mayr® Antriebstechnik sends the overload signal wirelessly. This revolutionary and absolutely reliable overload sensing system has considerable advantages compared with conventional signal transmission.
24th June 2010

mayr® Power Transmission unveils revamped website

mayr® Power Transmission unveils revamped website
Drive technology specialist mayr® Power Transmission has overhauled its Internet presence with an entirely new website. At www.mayr.de you will find extensive information on safety clutches, shaft couplings and safety brakes. In addition, catalogues in PDF format, technical documentation and CAD files for all products are available for download.
11th March 2010

Fast acting rectifier for safety brakes with wide mains voltage range

Fast acting rectifier for safety brakes with wide mains voltage range
The new ROBA-multiswitch, developed for switching safety brakes quickly, is capable of emitting a constantly controlled DC voltage independent of the mains voltage. This means that complex adaptation of magnetic coils to varying input voltages becomes unnecessary. Overexcitation on switch-on ensures that the connected brakes release extremely quickly.
18th May 2009

Torque Limiting Clutches & Shaft Couplings

Torque Limiting Clutches & Shaft Couplings
Over the last 30 years, electrical drives have continued to become more compact, quicker, capable of better performances and more dynamic. Of course, torque limiting clutches and shaft couplings had to follow this trend. Additionally, there have been a multitude of fundamental new developments for torque limiting clutches, often initiated by highly-specific, application-orientated demands.
28th October 2008


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex