ACS Motion Control

Address:
Sha'ul Amor Blvd.
Ramat Gabriel Industrial Park,
P.O. Box 5668
Migdal Ha-Emek
10500
Israel

Phone: +972-4-6546440

Fax: +972-4-6546443

Web: http://www.acsmotioncontrol.com/


ACS Motion Control articles

Displaying 1 - 8 of 8

Motion control dev kit reduces application development time

Motion control dev kit reduces application development time
  A new version of ACS Motion Control's SPiiPlus Application Development Kit (ADK) Suite motion control software has been announced, with new simulation and motion machine interface (MMI) tools. The SPiiPlus ADK Suite Version 2.50 provides enhanced diagnostics capabilities to minimise setup, tuning and programming time for motion control applications.
5th February 2018

Control system shortens lead time for solutions

Control system shortens lead time for solutions
ACS Motion Control has developed a modular rack-mounted motion control system that quickly and easily integrates up to eight universal motor drives with power supplies and an optional EtherCAT motion controller to deliver a customised solution. The complete MP4U control system simplifies the development cycle and shortens the lead time for implementing a tailored solution.
4th September 2017

Multi-axis controller improves motion control performance

Multi-axis controller improves motion control performance
In order to address the needs of highly demanding modern equipment, ACS Motion Control has launched a multi-axis motion controller that includes a high-speed EtherCAT-to-EtherCAT bridge. The SPiiPlusES combines ACS’ powerful motion controller capabilities with an external EtherCAT network master controller. The SPiiPlusES is used both as a node in any EtherCAT Automation Controller network, and as an EtherCAT Master controlling up to 64 axes and thousands of I/O.
11th August 2017


ACS launches rack mount multi-axis drive module

ACS launches rack mount multi-axis drive module
ACS Motion Control has expanded its family of multi-axis NanoPWMto include the NPArm, a fully integrated 19" / 6U rack mounted version with up to eight drives and a power supply. The modular NPArm Series operates with any motion controller supporting a ±10V sinusoidal current commutation command interface.
13th April 2016

Quad-axis universal drives for voice coil motors

Quad-axis universal drives for voice coil motors
ACS Motion Control has launched a series of compact EtherCAT drive modules for servo, step and voice coil motors. Featuring a powerful dual/quad-axis universal drive, the UDMSD series is designed for motors with a continuous power range of 10 to 100W (200W peak). The type of motor is selected by the user and can be set differently for each drive. The UDMSD series addresses the needs of demanding multi-axis motion applications with limited space, such as moving inspection heads, small manipulators, moving coil actuators and table-top motion stages.
23rd October 2015

Dual axis EtherCAT PWM drive delivers sub-nanometer performance

Dual axis EtherCAT PWM drive delivers sub-nanometer performance
ACS Motion Control has expanded its NanoPWM line of ground breaking PWM servo drives to include a new dual axis EtherCAT drive. The NPMPM series of EtherCAT servo drive modules provide motion performance that was previously only achievable using linear drives, without the drawbacks of such linear drives. The drives are significantly smaller, much more efficient, produce less heat dissipation, better protected and lower in cost.
10th July 2015

Motion control algorithms provide seamless transitions between feedback devices

Motion control algorithms provide seamless transitions between feedback devices
Designed specifically for linear motor based closed track transportation systems, ACS Motion Control has developed several advanced motion control algorithms for its SPiiPlusNT family of motion controllers and drives. ACS says that such systems offer improved performance at a fraction of the cost when compared with traditional moving magnet based closed track transport systems.
17th February 2015

Control module manages 32 axes and thousands of I/Os

Control module manages 32 axes and thousands of I/Os
  Capable of managing networks with up to 32 axes and thousands of I/Os, ACS Motion Control has introduced a line of EtherCAT master motion controllers. The SPiiPlusCMHV devices feature one/two axes of integrated drives that operate from three-phase 230 to 480VAC, or 320 to 670VDC.
18th December 2014


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

GISEC Global
23rd April 2024
United Arab Emirates Halls 2-8 - Dubai World Trade Centre
The Magnetics Show US
22nd May 2024
United States of America The Pasadena Convention Center
2024 World Battery & Energy Storage Industry Expo (WBE)
8th August 2024
China 1st and 2nd Floor, Area A, China Import and Export Fair Complex