|
Search
|
Sensors
Piezo-Z Slide Scanner for 3D / Super Resolution MicroscopyThe new PI nano™ piezo-Z stages are optimized for very fast step and settle and easy integration into high-resolution microscope applications. They feature a very low profile a large aperture, and travel ranges of up to 200 µm with sub-nanometer closed-loop resolution–ideal for leading-edge microscopy and imaging applications. The piezo stages are designed for inverted microscopes from the four major manufacturers: Leica, Nikon, Olympus and Zeiss. The low profile design of 20 mm (0.8") facilitates the integration. The large aperture accommodates microscopy accessories such as slide holders, Petri dish holders, etc. 
Flight Test SensorsThe new FTS fibre optic displacement sensors are designed for flight test applications. Weighing just 175 grams, the sensor electronics feature a 25 x 50 x 75 mm enclosure with MIL-DTL-83513 Micro-D connector for power and output signals. 
Renishaw QC20-W ballbar; new wireless product with volumetric testing capabilityRenishaw has announced the launch of a successor to its well established QC10 ballbar system; a tool adopted worldwide for the assessment of machine tool positioning and servo control performance. 
Non-contact sensors measure thickness and flatness of solar glass panelsA manufacturer of thin-film solar power modules is using non-contact measurement systems from Micro-Epsilon in order to inspect the quality of solar glass panels. The measurement system has helped to reduce the cost of processing defective parts. 
High resolution portable surface profiler uses confocal displacement sensorsA new non-contact metrology system that provides portable surface profiling, imaging and thickness measurements down to nanometre resolutions, is utilising high precision optoNCDT 2401 confocal displacement sensors from Micro-Epsilon. 
Draw-wire sensors used for wind turbine rotor blade testingDraw-wire displacement sensors from Micro-Epsilon are playing a vital role in the testing of the latest generation of wind turbine blades at the Fraunhofer Institute in Bremerhaven, Germany. 
High-Resolution Miniature Digital Pressure Sensor Module with Ultra-Low Power Consumption for Long Battery-LifeMeasurement Specialties, has just released for production, the Model MS5607-B digital pressure sensor featuring 24-bit resolution and the industry's lowest current consumption. This device also features a fast conversion rate of 0.6 ms at 8-bit resolution to 8.3 ms at 24-bit resolution. Current consumption of 0.9 uA at one conversion per second (8-bit) to 12.5 uA (24-bit) and resolution selection per conversion enables optimum application-specific power–performance trade-offs to be realized. 
Level Switch for Hazardous AreasFor applications in gaseous and dusty surroundings, Baumer offers its FlexLevel Switch 4401 in various ATEX versions. They enable a safe level detection in hazardous areas. The ATEX certifications cover the zones 0, 1 and 2 as well as the zones 20, 21 and 22. The FlexLevel Switch can be easily configured on PC via the FlexProgrammer 9701. When used with a cooling neck, the switch is suitable for process temperatures from -40°C to up to 200 °C. 
Fail-safe inductive sensors from ifm meet new Machinery DirectiveWhen it comes into force at the end of December 2009 the new Machinery Directive will reference the new EN 13849 standard for safety-related parts of the control system instead of the familiar EN 954-1. ifm electronic Ltd is ahead of the game with a range of fail-safe inductive sensors fully compliant with the latest standards. 
New RK: the updated series of inside cylinder magnetostrictive transducersEver since it was launched, Gefran's series of rod-type magnetostrictive transducers for inside cylinder applications was a great success, confirming the product's quality and its satisfaction of market demands. 
New Vibration Sensor From AceAce Controls International has introduced a new vibration sensor for process monitoring that detects local malfunctions in the automation process, thus preventing expensive repairs, maintenance and downtime. 
Non-contact angle sensors are now programmable with Vert-X Commander software from VariohmVariohm EuroSensor has launched a new software application for communication and programming of Contelec Vert-X series non-contacting and contactless angle sensors. As the exclusive UK distributor for the Swiss manufactured range, Variohm offer OEMs the ability to reconfigure and customise the sensor curve and output characteristics over its 0º to 360º measurement range. 
Orbisphere 1100 - New sensor ideal for ultrapure water applicationsThe Orbisphere 1100 series optical dissolved oxygen sensor from HACH LANGE is providing major advantages to international service company Serco, in the course of its work to solve corrosion problems within the UK power generation sector. The instrumentation has helped reduce maintenance time and service requirements to improve the overall monitoring efficiency of testing carried out under plant conditions. 
Capacitec High Temperature Non-Contact Displacement Sensors Offer Performance to +1000 °C in Manufacturing and Testing ApplicationsCapacitec, Inc. has announced the successful application of high-temperature non-contact displacement sensors within disc brake wear analysis, glass manufacturing and aircraft engine testing applications. Since the 1970's, Capacitec high temperature non-contact sensing technology has been in use in North America, Europe and Japan to solve the most demanding applications, measuring displacement of up to 0.4" (10 mm), within extreme temperature environments where resolution of one micron or better is a requirement, such as: 
Complete Suite of HART-Enabled Gas and Flame Detectors Available From General MonitorsA complete suite of HART-enabled gas and flame detectors is now available from General Monitors. These safety instruments protect employees, equipment and facilities from the dangers of hydrocarbon gases, toxic gases, oxygen depletion and flames. Model R82 First rate, fully friendly,… less costlyThe new Model R82, 26 GHz Two-wire non contact Radar Transmitter from Magnetrol is a high performance, yet low-cost level transmitter based on the concept of Pulse Burst Radar. Short bursts of 26GHz microwave energy are emitted and subsequently reflected from the liquid level surface. Liquid level is then calculated by applying the user's tank height and sensor Offset values. 
Endevco Celebrates 6,000th Successful Field Installation of Model 2221F Thru Bolt Mounted High Temperature Piezoelectric AccelerometerEndevco Corporation has marked the 6,000th successful field installation of its industry best-selling Model 2221F, a high impedance, piezoelectric accelerometer, designed for high temperature shock and vibration measurements. The exceptional, proven performance characteristics of Model 2221F have enabled it to be used historically across a variety of aerospace, flight test, and other demanding applications, most notably, as part of NASA's Space Shuttle Return to Flight Program, as well as within the shuttle programs of today. Model 2221F is used to help verify that no detrimental damage has occurred on the leading edge of the shuttle wing, prior to its return from orbit. 
Rugged Pressure and Temperature Switches for Nuclear Power StationsWith the series ZPN, ZDPN and ZT, Baumer offers very robust pressure and temperature switches developed especially for the use in nuclear power stations. The pressure switches are suitable for pneumatic or hydraulic control, for power generation safety equipments and for pressurized chambers control. They are resistant to short duration overpressure and show a good vibration resistance. The ZPN can measure a gauge pressure from -1 bar up to 600 bar with a very small intermediate range from -2 mbar up to 10 mbar. The ZDPN measures a differential pressure from 2 mbar up to 120 bar. 
UCL-510 - GEMS Introduces Ultrasonic Continuous Liquid Level Sensor With Multipoint Switch CapabilityGems Sensors & Controls has launched the UCL-510 Ultrasonic Level Sensor. The compact UCL-510 is suitable for non-contact applications such as industrial water treatment, wastewater management, chemical storage, and many other challenging fluid applications. The UCL-510 offers an innovative solution for challenging fluid measurement with no moving parts. 
New Calex Laser Sighting Tool for Non-Contact Infra-Red Temperature SensorsCalex has developed a new Laser Sighting Tool for the successful "Pyro" series of non-contact infra-red temperature sensors. 
Low cost plastic flowmeter is accurateThe Titan 800 Series turbine flowmeters are really low cost, non-metallic meters, ideal for measuring aggressive chemicals, and also suitable for ultra-pure water. The PVDF construction accepts 8mm or 12mm hose connections, and is specified for up to 60C and 10bar operation. 
Linear-Position Sensor supports Ethernet POWERLINKMTS announces completion of its R-Series Ethernet POWERLINK sensor for use in dynamic control applications with short cycle times. This product adds to the MTS portfolio of absolute, non-contact linear-positions sensors for real-time feedback that also includes EtherCAT interface. A resolution of 1 micron is possible for lengths from 25 mm to 20,000 mm. Position and velocity measurements can be provided for up to four locations on the sensor to ensure optimum control characteristics even when driving complex, multi-position tasks. 
E3 Electronic Modulevel First Configurable Displacer Transmitter on the MarketThe modernized, digital E3 Modulevel from Magnetrol is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The new E3 Modulevel has modernized packaging, increased functionality, diagnostics, and the capability to configure rather than calibrate the transmitter. The E3 Modulevel supports FOUNDATION fieldbusTM, HART, AMS, FDT/PACTware communication protocols. 
Extended STEVI commitment from STAGGlobal supply chain specialists – STAG Group – has announced continued long-term availability of STEVI instrumentation by purchase of manufacturing rights for these products from Atlantic Inertial Systems (formerly BAE Systems Inertial Products, Plymouth). STEVI – Sperry Turbine Engine Vibration Indicator – instruments continue to be used for propeller condition management on Transall military transports and Dassault ATL 1&2 maritime reconnaissance aircraft in the European theatre. As with many other established products the anticipated service life is put in the region of at least a further 10 years. 
PE Accelerometers Feature Through-Hole MountingMeasurement Specialties has released to production two new PE accelerometers for shock and vibration measurement. Models 7500A and 7501A feature welded construction and wide bandwidth to >15kHz. These hermetic devices offer outputs from 5.6pC/g to 20pC/g with operating temperatures from -73°C to +260°C. Sherborne Sensors Debuts Series T435 DC-Operated High Precision Servo Inclinometers for Space Constrained Application EnvironmentsSherborne Sensors has announced the North American launch of Series T435, a single axis, high-precision, closed loop gravity referenced servo inclinometer family, designed for down-hole logging applications, or for use in areas where space is at a premium. With a form factor measuring only 1.6 in. (40.6mm) high and less than 1.46 in. (37mm) in diameter, sensors can be stacked for simultaneous X & Y measurement of tilt angles. 
MR318 Fiber Optic Rotary Encoder for MRI and NMR ApplicationsMicronor's MR318 fiber optic rotary encoder is designed specifically for use as feedback in motion control systems operating in extreme electromagnetic fields. The sensor's passive optical design and non-metallic construction has no affect on MRI or NMR system operation or measurements. The multiturn encoder system offers 360ppr (1°) resolution and measures both angular position and shaft speed. MRI-related applications include feedback for actuator or motor control, monitoring patient position or correlating foot pedal position for fMRI diagnostics. 
Non-contact Torque Sensor Features Selectable Signal OutputsSensor Development Inc's model 01251 (IRT), now allows torque measurement signals to be processed in three different ways. The sensor output can be configured as frequency, analog or a 4-20 MA current loop. Signal filter response and output level signals are also adjustable under computer control. A Graphical User Interface Program is provided to allow rapid setting of the sensors parameters. These are high performance, non-contact sensors that utilize digital infrared telemetry to transmit the torque signal in dynamometer systems without the use of slip rings or rotary transformer systems. 
New Mercury 11 1900 Encoder Can Reduce System Size and Cost While Improving System Performance With High Signal Quality and SpeedInmoco's new Mercury II 1900 analogue encoder from MicroE Systems opens up new application possibilities by enabling smaller, lighter equipment designs that deliver higher speed (up to 7.2m/s) and greater throughput. The Mercury II 1900 provides industry leading- resolution (5 micrometer) to 1.2nm, depending on customer electronics) and accuracy (= to micrometer to = to micrometer), unmatched versatility and easy installation. It integrates a miniaturised sensor – which fits where others won't - and offers the flexibility for use with cut-to-length tape scales for easy customisation and installation, or glass scales for the highest accuracy applications (= to micrometer). 
Mini-Mixer will be the torque of many industriesA torque sensor is helping analyse recipes' mixing properties in a project that could slash development costs in the food and plastics industry and help nanotechnology advances in the pharmaceuticals world. 
Sensor Developments Inc. adds to it's line of anti-trap force measurement systems.The incorporation of power doors on new automobiles has necessitated control systems to prevent personal injury and trapping. In order to design, tune and validate these systems, accurate force measurements need to be made at critical locations of the doors travel. Designing innovative and easy to use fixturing for SDI's popular model 90328 window pinch sensor has allowed engineers and technicians to make these measurements accurately and repeatably. 
Motor Protection PTC ThermistorsATC Semitec is now stocking a range of motor protection PTCs to compliment their existing range of re-settable thermal cut-outs. The new SPMP PTCs are available with trip temperatures ranging from 60oC to 190oC and comply with the DIN 44081 industry standard. 
Model 01287 Motor Pulley Torque SensorSensor Developments Inc. is pleased to announce a new development in its rotary torque sensor line with our new motor pulley torque sensor, model 01287. This sensor features a highly accurate integrated sensing element, capable of resolving low torque levels while being exposed to high radial loads created by belt drive systems. Use it to replace a standard pulley system for equipment like engines, generators, fluid pumps, or other motor driven equipment and continuously monitor real time torque while in operation. This custom sensor can be adapted to a wide range of belt drive systems and can be installed in a dynamometer test stand or on vehicle. Analytical Technology Launches New Universal pH/ORP Sensors for Maximum Performance and Reduced MaintenanceAnalytical Technology Inc announces the introduction of its new Q22 Specialty pH/ORP sensors. Water companies and industrial users are under constant pressure to reduce maintenance costs and improve performance. Analytical Technology's new sensors are supplied as standalone parts allowing for simple sensor replacement without the need for an entire system installation. In addition, the new sensors have been designed for use with all pH/ORP analysers and generic panel meters available on the market. 
New IR Sensing Combustible Gas Detection System Is Scalable For Small To Large ApplicationsThe new IR4000 Infrared Combustible Gas Detection System from General Monitors is a scalable plant safety solution with voting. The system's IR4000M Multi-Point Monitor can connect up to eight IR400 Point IR Gas Detectors and read their status with one command, one detector at a time. The IR4000M can also calibrate, gas check and zero each IR400 sensor with a single command, reducing the cycle time for routine maintenance. Analytical Technology Launches New Universal pH/ORP Sensors for Maximum Performance and Reduced MaintenanceSpecialist electrochemical sensor manufacturer Analytical Technology Inc (ATi) announces the introduction of its new Q22 Specialty pH/ORP sensors. Water companies and industrial users are under constant pressure to reduce maintenance costs and improve performance. Analytical Technology's new sensors are supplied as standalone parts allowing for simple sensor replacement without the need for an entire system installation. In addition, the new sensors have been designed for use with all pH/ORP analysers and generic panel meters available on the market. 
Drift Pull Steering Measurement SystemThis new sensor system allows vehicle manufacturers to accurately measure the effects of drift pull caused by steering wheel and tire alignment errors. Operators can quickly measure and record drift-pull torque and angle and determine whether the vehicle has been properly aligned after production. 
New 2009 Endevco Product Resource offers information on sensing solution applications, products and programsEndevco has announced publication of its new 2009 Product Resource. The volume is a comprehensive guide including applications, technical specifications and support programs for the company's extensive line of products. 
VPFlowScope: measuring flow directionThe VPFlowScope of VPInstruments offers direction sensitivity without the usage of extra equipment. Thanks to the patented ThermabrigdeTM sensor, measuring flow and direction is now an easy task. In the industries that use compressed air, the awareness is growing that flow measurements are key to large energy savings. In some cases however, measuring the compressed air demand is not as straightforward as it seems. 
An innovative torque sensor is helping to reduce engine emissions and improve economy as part of a project to develop an intelligent lubrication systemWith engine efficiency under the spotlight like never before, automotive companies are exploring all avenues for improving performance. And because engines have a rotating power output, torque is the key measurement. 
Model 20009 Tire Durability Force SensorThis unique style lateral force sensor is used to evaluate the durability of passenger tires. It features an element design that is able to withstand very high extraneous loads experienced during aggressive vehicle maneuvers, while not affecting the desired tire performance measurement. GEMS Introduces Ultrasonic Continuous Liquid Level Sensor for Challenging Fluid MeasurementGems Sensors & Controls has launched the UCL-520 Series of Ultrasonic Level Sensors. The UCL-520 Series is suitable for non-contact applications such as industrial water treatment, wastewater management, chemical storage as well as many other challenging fluid applications. 
Surface attack thwarted by PfaudlerPfaudler has solved a major process problem for a pharmaceutical manufacturer in Ireland who were having to regularly replace the pH probe in their reactor vessel. 
Dew Point Sensor Calibration Exchange Program from Michell extended to the new Easidew TX I.S.Michell Instruments announce they have extended their Sensor Calibration Exchange Program to the recently introduced Easidew TX I.S. Dew Point Transmitter. 
Non-contact medical device measurementThe high-precision, non-contact measurement of medical devices can now be made with a single probe enabled by the optical sensors CHRocodile E, X or IT available from Armstrong Optical Ltd, the UK representatives of Precitec Optronik GmbH. 
The new version of the 1051 - PhidgetTemperatureSensor is a lot more accurate than the previous modelPhidgets Inc. announced that the new version of the 1051 shows significant improvements in both reliability and accuracy through the addition of on-board filtering, cold junction compensation and optimized calibration methods. The new version replaces the previous version of the product. 
Rugged Stud Mounted High-g AccelerometerThe Model 3801A is a mV output MEMS accelerometer in a rugged hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to 10,000g. 
Gems Announces New Low Flow-Rate Sensor In FDA-Approved MaterialsGems Sensors & Controls has launched the new TurboFlow FT-330 series of low-cost, highly accurate turbine flow rate sensors for drinking water dispensing applications. The FT-330 is an OEM flow sensor featuring proven Hall-effect turbine technology in a small package for years of dependable, worry-free service. All wetted parts are made from FDA-approved materials including Noryl, polyamide or nylon composite, Delrin (Polyoxymethylene (POM)) and 316 stainless steel. 
Next Generation IR Combustible Gas Detector Offers Superior Protection With Low Operating CostsWith its advanced point infrared combustible gas sensing element, the new IR400 Combustible Gas Detector from General Monitors delivers reliable protection against explosive hydrocarbon gases with a low power design that installs in minutes and features heated optics to eliminate condensation and includes a dirty optics indicator for fail safe operation. 
Contrinex enters safety light curtain marketContrinex has introduced a new range of safety light curtains that sets new standards in terms of reliability and value for money. Known as Safetinex, the modular design allows fully tested systems to be delivered on a very short time scale. 
Testing Time For Vacuum Cleaner MakerA company that designs and build custom test equipment for the manufacturing and research industries has developed a cost saving sub-system that allows eight dynamometer test rigs to share a single calibration unit based on a Digital TorqSense transducer from Sensor Technology Ltd. 
Contrinex sensors specially designed for food industryContrinex has developed a range of rugged inductive sensors that has been specifically designed for dealing with the hazardous environments found in the food industry. Although the food handling process itself does not always present an aggressive environment, the cleaning and wash-down routines required to meet hygiene standards usually involve caustic chemicals that can cause severe damage to control sensors. 
Stainless Steel Ultrasonic Sensor with Digital DisplayWith the level sensor UFAR, Baumer's product segment Process Instrumentation offers a measuring device that precisely and safely detects the level of granulates, pastes and liquids independent of their colour or consistency. It is based on an integrated ultrasonic sensor in a polished stainless steel housing 1.4435 with a G1/2" mounting thread. Additionally, the sensor's sonic transducer is protected by an extremely media-resistant parylene coating. 
BEI Launches Sensor Accessories E-Commerce Web SiteBEI Industrial Encoders is pleased to announce the launch of bei-industrial-products.com, a new e-commerce web site dedicated to industrial sensor accessories and support products. These products will help users install, maintain and retrofit a variety of industrial sensor applications and are all available for easy online purchase. 
High Accuracy Speed SensorThe SPEEDBOX2 is the successor to Race Technology's highly regarded SPEEDBOX which is already used by many automotive OEMs and vehicle testing organisations worldwide. The SPEEDBOX2 is a high accuracy, low latency GPS and inertial transducer suitable for interfacing with a wide range of data acquisition and logging systems. Primarily, the SPEEDBOX2 is used to measure speed and distance travelled, however other outputs include position, gradient, heading and acceleration. Modular add-ons are also available to allow measurement of vehicle roll, pitch and yaw angles and rotation rates. 
Dynamometer Torque Sensor Featuring 4 Temperature InputsThese high performance, non-contact sensors utilize infrared telemetry to measure rotational torque in dynamometer systems. This particular sensor incorporates a custom transmission system that allows for up to 4 temperature inputs in addition to the rotating torque measurement. Ideal for measuring multiple heat sources creating from friction sources such as bearing and braking systems. 
Displacement Sensor with Multi-Position MeasurementThe non-contact MTS Temposonics® position sensors are now able to measure up to 30 positions along a common axis using only one sensor. Depending on the number of measuring points, an appropriate number of position magnets that all generate an individual signal travel along the sensor housing simultaneously. Each magnet is firmly assigned to a mobile machine part. Simultaneous detection of several positions permits considerable savings compared to conventional displacement sensors and rotary encoders. Due to a decreased number of position measurement systems and the compact construction of the Temposonics® sensor, the costs of displacement measurement and space requirements are reduced. 
Contrinex two-wire sensors save on installation and running costsIn large production plants such as found in dairies, breweries and food processing and automotive manufacturing plants there are major technical issues resulting from long cable runs and, because cable prices have quadrupled over the past five years, there are also major cost issues. 
New SF Series from Michell Instruments provides cost-effective means to control moistureThe new SF Series from Michell Instruments offers a step forward in the cost-efficient control of moisture via dew point measurement in all industrial areas where increased energy savings and efficiency create a unique competitive advantage. 
Precise, Accurate and Powerful Pan-Tilt UnitsDirected Perception introduces the PTU-D100 family of mid-sized computer-controlled pan-tilt units. Directed Perception is a leading manufacturer of innovative devices and software for the intelligent control of sensors and sensor processing. They believe in quality, innovation, and customer support as their key drivers for success. 
Phidgets Inc. releases a 30Amp Current Sensor and reduces the suggested selling price on its 20Amp Sensor.Phidgets Inc. released the 1122 - 30Amp Current Sensor AC&DC. The 1122 measures AC current up to 30Amps and DC current from –30 to +30 Amps. The product is designed to connect into an Analog Input on the 1018 PhidgetInterfaceKit 8/8/8 or on the PhidgetTextLCD. 
Improved design VPFlowMate in-line flow meter familyNow all in-line mass flow meters of VPInstruments are offered in a new revolutionary design! Improvements were made to the VPFlowMate in-line family in several areas, making this the ultimate device for your compressed air flow measurements. 
Ultrasonic gas leak detectionHydrogen is a combustible gas that is difficult to detect and easily ignitable on contact with open flames, electrical sparks, and static discharge. It is lighter than air and consequently challenging to detect in open, well ventilated areas. 
Dew Point Transmitter for CNG applicationsRecently developed by Michell Instruments, the Easidew TX I.S. Transmitter offers a minimal footprint while maintaining exceptional performance and reliability. The new transmitter can be connected in a 2-Wire loop powered or 3-Wire configuration. It features a white HDPE sinter, designed to provide a visual indication of sensor contamination. The new sintered guard provides protection to less than 10 micron and is impermeable to liquids 
Wilcoxon Research introduces isolator bases for accelerometersWilcoxon Research announced that it will add isolator bases to the company's extensive line of vibration sensor mounting accessories. The new isolator mounting bases protect a vibration sensor from up to 1500 volts of electricity by electrically isolating it from the case of the machine on which it is mounted. Wilcoxon Research sensors certified to meet new ATEX standardsWilcoxon Research has improved the hazardous area certifications on several of the company's most popular accelerometers. The changes in certification make the product available for a wider range of safety barriers as well as compliant with the new European ATEX standards. Miniature Crash Sensor for Auto Safety ApplicationsMeasurement Specialties has introduced the new miniature Model 52M30 accelerometer for auto safety applications. It offers significant cost savings, ease of use and measurement reliability for test professionals. 
Weld-immune sensors from Contrinex keep production lines runningAutomated welding fixtures operate under the toughest possible conditions being subject to frequent and hard physical knocks, metal spray from welding processes and severe and frequent heat cycling. In addition, the intense levels of RFI created will cause the majority of inductive sensors to malfunction and, in some cases, change output status. In industries like automotive manufacture large numbers of welding cells and fixtures are expected to achieve high levels of reliability to meet production targets and sensors can be a weak link in the quest for uninterrupted production. 
Enhanced NIR Sensor For AVT Marlin CameraFirstsight Vision can now offer the new Marlin F-131B NIR FireWire camera from Allied Vision Technologies (AVT). The AVT Marlin F-131B NIR is an extremely compact monochrome FireWire camera equipped with a highly sensitive 2/3 CMOS sensor with Global Shutter, giving SXGA resolution and high-quality images in 8-bit format. This sensor offers almost twice the sensitivity in the far red and near infrared wavelength ranges compared to the standard sensor. Simpler Mounting for SensorsThe sophisticated systems that are being increasingly used to enhance the safety and comfort of modern vehicles make extensive use of sensors. The key to getting the best from these tiny but critical components is, however, all in the mounting, says Chris Needes, Automotive Product Manager at Saint-Gobain Performance Plastics Rencol. 
CMOS sensor based event detection system from Southern Vision Systems, Inc.Southern Vision Systems, Inc. today announced the introduction of TriggerView, a unique CMOS sensor based event detection system. Highly-reliable and low latency, TriggerView utilizes SVSi's patent-pending Image Cued Triggering to replace infrared, motion, proximity or other sensors to provide a TTL trigger to cameras, recording devices, metrology equipment or PLCs. 
Phidgets releases the 1127 – Precision Light SensorPhidgets Inc. released today the 1127 – Precision Light Sensor which measures human perceptible light level in lux. 
Contrinex sets new benchmark for background suppression sensorsDiffuse background suppression (BGS) photoelectric sensors are used in applications where accurate differentiation between the target and potentially interfering backgrounds is essential. As with all such set-ups, when using this technique it is vital that only the target is sensed, regardless of the colour, surface and shape of the background and target. 
Motor Flange Torque SensorSensor Developments, Inc is offering a unique torque sensor to measure the reaction forces exerted on the motor housing. 
Intelligent TS4000 Toxic Gas Detector Receives SIL 2 Suitable RatingProviding advanced protection against a wide range of hazardous industrial gases and oxygen deficiency, the TS4000 Intelligent Toxic Gas Detector from General Monitors is now rated SIL 2 suitable. New intrinsically safe leak detector (Ex) for hazardous environmentsAdixen Sensistor has developed a new, intrinsically safe leak detector. The equipment meets the ATEX directive and may be used for leak testing in explosive environments, such as aircraft fuel systems. Saving Energy & Reducing Waste Are Key To Achieving Improved Efficiency And Maximised Profitabliity In Food & Beverage PlantsIn all process industries the objectives are to improve efficiency and maximise profitability, at the same time as ensuring repeatable product quality. Moreover, these all have to be achieved within the required environment of high hygiene standards, where reliable assurance of clean and cleanable pipework and equipment is paramount. 
High-Temperature UV Flame DetectorWith a highly responsive ultraviolet flame sensor and advanced signal processing, the new high-temperature FL3111HT UV Flame Detector from General Monitors operates in temperatures up to 125ºC (257ºF), which makes it suitable for use in demanding process and plant environments. To achieve the FL3111HT's high temperature rating, the instrument features a uniquely designed UV flame detector and electronic components that operate with very low power consumption to reduce detector self-heating. 
Endevco introduces crush test accelerometer with certified performance to specifications and low cost of ownership for critical applicationsEndevco Corporation has announced introduction of the Endevco model 7287 crush sensor with performance certified to specifications for critical test applications requiring superior accuracy, reliability and low cost of ownership. The device provides for reliable, predictable performance in terms of several key parameters and avoids the need to characterize the sensor before use. 
Wilcoxon Research introduces first stand-alone 4-20 mA vibration displacement sensor for machinery monitoringWilcoxon Research announces the addition of a displacement sensor to its popular PC420 Series of 4-20 mA vibration sensors. The PC420D is the first IEPE displacement transducer and 4-20 mA vibration transmitter packaged as a single sensor. 
High performance at competitive prices from new generation of Contrinex photoelectric sensorsNow available from Contrinex is a new generation of photoelectric proximity switches designed to provide users with a high level of performance at competitive prices. 
Lotus hybrid bloomsThe torque-current characteristics of a combined motor-generator developed for a Lotus-based hybrid car have been comprehensively mapped by a TorqSense digital torque sensor. 
New Rugged Electro Optic Level Sensor From GemsGems Sensors & Controls has announced the launch of a new miniature, low cost Electro Optic Level Sensor, the ELS-950. The compact size, durability, high temperature capability and low cost makes the ELS-950 ideally suited for monitoring coolants, lubricants, hydraulic fluids and overflow reservoirs in industries as diverse as off highway vehicles, medical, oil and gas, water, HVAC, marine, transport and food & beverage. 
New AVT Stingray Cameras AvailableFirstsight Vision can now offer the new Stingray series of cameras from Allied Vision Technologies (AVT). Stingray combines the outstanding functionality of the Pike family with the sensors and compact size of the Marlin series to offer excellent value for money. The six Stingray versions feature progressive scan colour or monochrome CCD sensors, each available with resolutions from VGA to 2 megapixels. Advanced thermal management for the sensors reduces dark current noise and improves image quality. 
New diffuse laser sensors from Contrinex allow cost-effective sensing of small objectsContrinex has introduced a new range of M18, low cost, high precision diffuse laser sensors designed to solve the problem of detecting small components or features during manufacturing processes. 
New 2008 Endevco Product Catalog and Measurement Resource is comprehensive sensing solutions referenceEndevco has announced publication of its new 2008 Product Catalog and Measurement Resource™. The volume is a comprehensive guide to advanced sensor technology and selection as well as the Endevco product line and support services. It includes valuable references materials such as frequently requested technical papers. 
Omron customises MEMS mass flow sensor rangeOmron Electronic Components Business – Europe is now offering to customise its D6F MEMS mass flow sensor products to suit individual customer requirements in terms of flow rate and non-corrosive gas type. The new customised sensor service is being presented at Sensor and Test in Nuremberg in May 2008. Omron can provide mass flow sensors suitable to measure any flow rate from 1 mm/s to 40 m/s or 1 LPM to 50 LPM of most non-corrosive gasses. 
New vibration sensor catalog from Wilcoxon ResearchWilcoxon Research's new vibration sensor catalog has a handy sensor selection guide to help choose the right accelerometer or 4-20 mA sensor for the application. Also included are technical notes and brochures, all from the industry leader in vibration sensor quality, reliability and expertise. 
Smallest fibre optic sensor in the world from ContrinexContrinex has once again pushed back the boundary of sensing technology with the launch of its new ultra-tiny diffuse fibre optic sensor that has a tip diameter of only 0.5mm making it ideal for detecting extremely small targets or features. 
High-speed 3D surface profilingThe new MPLS180 sensor from Armstrong Optical Ltd of Northampton is now available allowing the fast, high-resolution 3D scanning of surfaces for all types of applications - ranging from wrinkles on skin to complete, populated, printed circuit boards. 
FlexTemp – Configurable Temperature TransmitterThe FlexTemp 2301 is a temperature transmitter for Pt100 sensors measuring with an accuracy of only 0.25°C tolerance range. With the universal FlexTop versions 2311 and 2321, the input can be configured for RTD sensors as well as for thermocouples, resistance sensors and current or voltage signals. The universal transmitters have a galvanic isolation between input and output. Their accuracy is at 0.1°C. 
Rencol Introduces Innovative Sensor MountRencol Tolerance Rings has developed a new way of mounting the position sensor magnet accurately and rigidly using a tolerance ring. The new approach presents a simple and cost-effective alternative to the more traditional mounting methods, such as heat to press and the use of adhesives. 
New reference guide includes largest choice of current sensors in world todayA new guide is now available from sensor manufacturer Micro-Epsilon on the company's non-contact, wear-free eddy current displacement sensors. 
New side exit accelerometer with integral cable available from Wilcoxon ResearchWilcoxon Research introduces a new side exit, low profile accelerometer with an integral cable. The 787F is the integral cable version of Wilcoxon's extremely popular 787A side exit general purpose sensor with a permanent Viton® boot and Teflon® jacketed cable to provide protection in the harshest environments. 
DIY Aperture Metal DetectorFor the small business or entrepreneur setting up an inline metal detecting system can be a daunting and expensive proposition costing several thousand pounds and often not meeting the actual requirements of the task. With this in mind Essex Metal Detectors have developed the Saxon AP 1. A DIY metal detector board that can in a couple of hours be set up and configured for many types of inline or aperture metal detecting tasks. 
Sensor Hones in on Sharp OperatorsRisk is being driven out of the use of heavy duty diamond cutting tools thanks to a Euro 800,000 EU-backed research programme at Greenwich University in London, to determine the true operating characteristics of such equipment. 
World’s toughest range of M8 inductive sensors now available with M12 connectorsThe Contrinex Series 700, the world's toughest range of stainless-steel, inductive sensors, now includes versions with an M8 sensor plus M12 connector allowing system designers to use compact high performance sensors while standardising on M12 connector format. 
New generation Vaisala HUMICAP® relative humidity sensorVaisala has introduced a new generation Vaisala HUMICAP® relative humidity sensor, the Vaisala HUMICAP®180R used in Vaisala industrial humidity transmitters. This new type of capacitive humidity sensor has been developed especially to cope with chemical interference. 
Ultrasonic sensors replacing photoelectric in many applicationsContrinex has introduced a new range of low-cost ultrasonic sensors designed specifically for sensing clear objects as found in modern packaging techniques where high clarity material improves the attractiveness of the product. 
Froggy – the new fibre optic sensor from ContrinexContrinex has developed a unique multiple beam, diffuse, fibre optic sensor to solve the problem of capturing, counting and controlling small components produced by modern, high performance manufacturing machinery. 
Ethernet based Environmental Monitor sends email AlarmsThe Poseidon 3268 is a simple Ethernet based stand-alone device which can send an email alarm when up to 4 monitored temperature or humidity sensors exceeds their defined range. The Poseidon 3266 also has 4 contact-closure inputs which can be used to trigger alarms on state change and there are 2 relay outputs which can be used to reset servers, or switch on a fan, etc. |
Headlines |
 Interested in advertising with us?
Click here
|
||
- © Copyright Engineering Specifier - Engineering Specifier News
- Website design, hosting & Technology: Strategies Group Plc