Search

Process Hardware

HEATLESS PRESSURE SWING ADSORPTION DRYERS

HEATLESS PRESSURE SWING ADSORPTION DRYERS

A full range of HPS (heatless pressure swing) adsorption dryers for compressed air systems are available from Hi-line Industries Ltd. These have been designed with simplified 'plug and play' installation combining high efficiency with minimum running cost, while also providing reliability based upon the latest technological advancements.

Read full story »

AIR COOLED LIQUID CHILLER RANGE WITH ‘NO FROST’ EVAPORATOR

AIR COOLED LIQUID CHILLER RANGE WITH ‘NO FROST’ EVAPORATOR

A full range of chillers for water and other process liquids can now be supplied by Hi-line Industries Ltd. Designated as their Hi-Cool range with 27 models available, liquid cooling capacities from 3.2 to 426kW and nominal water flows from 550 to 73,270 litres/hour can be accommodated with liquid inlet/outlet temperatures of 20/15°C and an ambient of 25°C. For inlet/outlet temperatures of 12/7°C and ambient of 32°C, the cooling capacities and nominal flow rates would be reduced by 70-75% overall. High COP is achieved across the range, with chillers providing almost three times more cooling power than their electrical consumption.

Read full story »

Economic desiccant dry air at the point of use

Economic desiccant dry air at the point of use

Within a multi-outlet compressed air installation there may be only a few stations where desiccant dry-air is an absolute requirement. In these circumstances, the Hi-Zorb units manufactured by Hi-line Industries Ltd can provide the economic solution to constant -40°C dewpoint air supplies provided at pre-determined points of use. The small product footprint is also ideal for installation where factory floor space is at a premium.

Read full story »

New Marine HMI Display is Easy to Read in Direct Sunlight

New Marine HMI Display is Easy to Read in Direct Sunlight

A new HMI has been launched for the marine and offshore sectors, which has a unique sun-readable display. The display reduces glare completely and operates effectively, even in direct sunlight conditions.

Read full story »

Panel Mounting Humidity Adsorbers Give Assured Protection

Panel Mounting Humidity Adsorbers Give Assured Protection

Brownell panel mounted humidity adsorbers have been designed to protect all kinds of electronic and electrical equipment and systems against corrosion, dampness and contamination by reducing any existing or incoming moisture to acceptable levels, with the added safety of integral indicators that monitor saturation and indicate when reactivation or replacement is required.

Read full story »

Immersion Proof Breathers Prevent Damage to Enclosures and Instruments

Immersion Proof Breathers Prevent Damage to Enclosures and Instruments

Lightweight materials used in the manufacture of electronic products often give designers the dilemma of either having to restrict the applications or to increase the strength of the enclosure walls. Heat can cause build-up of pressure within an enclosure, and without adequate venting the lightweight material could fracture.

Read full story »

Nitrogen Gas Purging Protects Equipments Against Humidity and Condensation

Nitrogen Gas Purging Protects Equipments Against Humidity and Condensation

Brownell has introduced its Neps1000 (Nitrogen Environment Purge System), which creates dry internal environments for cameras, circuit boards, lasers, high voltage and electronic equipment, optical systems and other equipment at risk of malfunction and long-term corrosion from the damp. It provides oxygen inhibiting with nitrogen gas protection.

Read full story »