Tolerance rings – from concept to production
News Release from:
When tackling a fixing issue between two mating components, it can prove beneficial to consider integrating an innovative radial spring fastener. Stuart Kelly, Appliance Product Manager at Saint-Gobain Performance Plastics Rencol, looks into the many possibilities of using tolerance rings.
Design essentially is an exercise in problem solving; whether the engineer is starting from design concept or re-designing an existing product, it is essential problems are solved early on in the process. This is true particularly where the fastening of two annular components is being considered.
In the final assembly, typical fixing issues can include excessive noise and vibration, resonance frequencies and thermal expansion. There may also be a requirement for predictable and repeatable slip or torque overload protection. In many of these circumstances, the use of a tolerance ring can deal with, or even eradicate, these issues completely.
The idea behind tolerance rings is very straightforward – they’re simply radially sprung steel rings that are designed to be press fitted between two mating components, such as a motor shaft and a take-off pulley. They are, in other words, a special form of frictional fastener.
Typically manufactured from high quality spring steel, stainless steel or specialist spring materials, tolerance rings are invariably custom designed to suit a particular application. All types, however, have one essential characteristic in common – a series of protrusions or ‘waves’ around their circumference. Each of these waves acts as an individual radial spring which, when the tolerance ring is in situ, transfers forces between the mating components.
This arrangement means that tolerance rings are capable of handling direct torque transfer, torque slip, axial retention, controlled collapse and radial loading between the mating components. Providing exactly the right combination of properties needed for a particular application involves deciding on the number of waves on the ring, the optimum wave design, and the best combination of material from which to manufacture the ring.
Tolerance rings are normally purpose-designed for each application with engineers at Saint-Gobain Performance Plastics Rencol working closely with designers from the early stages of development. Once the need for using a tolerance ring is identified, feasibility studies are carried out to check whether the fastener can be physically developed and designed.
At the concept stage, initial samples of the ring are produced and delivered for testing in the final assembly. This is the point at which the true benefits of using tolerance ring can be observed first hand, such as reductions in noise and vibration, avoidance of resonance frequencies; provision for predictable and repeatable slip; overload protection and combating the effects of thermal expansion. In bearing applications, for example, tolerance rings are able to compensate for differential thermal expansion between components, allowing use of components with wide tolerances.
During pre-production, a production representative quantity is manufactured using production tooling – this is used to prove the production processes and control systems. If successful, the tolerance ring moves into production status after the first full run, and the drawing and system status are updated to reflect this.
Tolerance rings are currently used in a wide range of appliance applications, most commonly in electric motors. For example, in vacuum cleaner motors they are used to securely retain bearings under all operating conditions. Other applications include: retaining bearings in washing machine drums, mounting bearings and components onto rollers in photocopiers, printers and other paper handling machines, fixing clutch assemblies into plastic housings and mounting transmission component bearings in plastic housings on floor cleaners. Tolerance rings are well suited to bearing retention applications in as-cast, as-pressed or as-moulded housings, eliminating the close tolerance machining of the bearing bore. Tolerance rings can also be implemented to compensate for differential thermal expansion in dissimilar materials, for example in alloy or plastic housings, and can also tolerate high levels of vibration. Operational speeds in excess of 20,000rpm and temperatures up to 150°C can be readily accommodated with no loss of bearing retention.
However, tolerance rings can be used in other applications besides bearing retention. Power tools, such as drills, saws and hedge trimmers, need to integrate some sort of torque overload protection to prevent the motor from stalling when an overload condition or jam occurs. This safeguard also helps eliminate the possibility of the motor burning out and prevent damage to the drill bit, if it’s a power drill, and drive gears. Here the specially designed tolerance ring is inserted between the gear and the hub to create an interference fit. Since the parts are rigidly connected through the ring, a zero backlash system is achieved. At a pre-determined torque level, when the load reaches a point at which damage would otherwise occur, the tolerance ring will flex and slip. As soon as the overload condition is removed, the interference fit is re-established allowing the power tool to continue normal operation. Key to this particular design is that overload can occur many times – up to 1000, 360-degree slips can be accommodated – without adversely affecting operation.
Tolerance rings are convenient, versatile and inexpensive, yet they solve a whole range of design problems and deliver valuable benefits. Many appliance manufacturers are already enjoying these benefits – perhaps it’s time for you to join them!