servo motor controller, CAN

OEM Servo Motor Controller with CAN

News Release from: QuickSilver Controls, Inc.
28/04/2008

QuickSilver has added a CAN option to its smallest (2"/52mm x 2.5"/63mm) most cost effective servo motor controller. CAN can be configured for peer-to-peer, master or slave which allows the controllers to share I/O and registers with other CANopen enabled SilverDust controllers or 3rd party CANopen devices (i.e. I/O blocks, encoders, PLCs…). For a multi-axis system, connect several MG-Cs, make one the master and let the others receive motion commands over CAN.

This single axis, programmable controller is specially designed to servo 3rd party stepper motors creating a closed loop stepper system. It also includes serial communications (RS-232, RS-485), and 7 I/O. The RS-232/RS-485 serial network runs independently in parallel to CAN for supervisory control from a host (i.e. PC, PLC, HMI..).

The 7 bi-directional I/O, 12V-48V input power, and communications signals are accessed through the DB15HD port and can be separated using one of our popular breakouts (QCI-BO-B, QCI-BO-B1, QCI-BO-B1A). For 24V I/O operations, QuickSilver recommends the
QCI-BO-B52 breakout.

Other MG-C Features:

· 12-48V DC Input Power (UL CE)
· 7 TTL, Bi-Directional I/O
For 24V use QCI-BO-B52
· 4 Analog Inputs
· Non-Volatile Memory
o ~3000 program lines
· R2-232/485(ASCII, Modbus® RTU)

· CAN
· 100:1 Inertial Miss-Match
· PVIA™ Servo Loop
· Point To Point Moves
· Profile Moves
· Electronic Gearing/Camming
· Multiple Thread Programming